linux/arch/arm/mach-omap/time.c
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

385 lines
11 KiB
C

/*
* linux/arch/arm/mach-omap/time.c
*
* OMAP Timers
*
* Copyright (C) 2004 Nokia Corporation
* Partial timer rewrite and additional VST timer support by
* Tony Lindgen <tony@atomide.com> and
* Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
*
* MPU timer code based on the older MPU timer code for OMAP
* Copyright (C) 2000 RidgeRun, Inc.
* Author: Greg Lonnon <glonnon@ridgerun.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <asm/system.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/leds.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
struct sys_timer omap_timer;
#ifdef CONFIG_OMAP_MPU_TIMER
/*
* ---------------------------------------------------------------------------
* MPU timer
* ---------------------------------------------------------------------------
*/
#define OMAP_MPU_TIMER1_BASE (0xfffec500)
#define OMAP_MPU_TIMER2_BASE (0xfffec600)
#define OMAP_MPU_TIMER3_BASE (0xfffec700)
#define OMAP_MPU_TIMER_BASE OMAP_MPU_TIMER1_BASE
#define OMAP_MPU_TIMER_OFFSET 0x100
#define MPU_TIMER_FREE (1 << 6)
#define MPU_TIMER_CLOCK_ENABLE (1 << 5)
#define MPU_TIMER_AR (1 << 1)
#define MPU_TIMER_ST (1 << 0)
/* cycles to nsec conversions taken from arch/i386/kernel/timers/timer_tsc.c,
* converted to use kHz by Kevin Hilman */
/* convert from cycles(64bits) => nanoseconds (64bits)
* basic equation:
* ns = cycles / (freq / ns_per_sec)
* ns = cycles * (ns_per_sec / freq)
* ns = cycles * (10^9 / (cpu_khz * 10^3))
* ns = cycles * (10^6 / cpu_khz)
*
* Then we use scaling math (suggested by george at mvista.com) to get:
* ns = cycles * (10^6 * SC / cpu_khz / SC
* ns = cycles * cyc2ns_scale / SC
*
* And since SC is a constant power of two, we can convert the div
* into a shift.
* -johnstul at us.ibm.com "math is hard, lets go shopping!"
*/
static unsigned long cyc2ns_scale;
#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
static inline void set_cyc2ns_scale(unsigned long cpu_khz)
{
cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz;
}
static inline unsigned long long cycles_2_ns(unsigned long long cyc)
{
return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR;
}
/*
* MPU_TICKS_PER_SEC must be an even number, otherwise machinecycles_to_usecs
* will break. On P2, the timer count rate is 6.5 MHz after programming PTV
* with 0. This divides the 13MHz input by 2, and is undocumented.
*/
#ifdef CONFIG_MACH_OMAP_PERSEUS2
/* REVISIT: This ifdef construct should be replaced by a query to clock
* framework to see if timer base frequency is 12.0, 13.0 or 19.2 MHz.
*/
#define MPU_TICKS_PER_SEC (13000000 / 2)
#else
#define MPU_TICKS_PER_SEC (12000000 / 2)
#endif
#define MPU_TIMER_TICK_PERIOD ((MPU_TICKS_PER_SEC / HZ) - 1)
typedef struct {
u32 cntl; /* CNTL_TIMER, R/W */
u32 load_tim; /* LOAD_TIM, W */
u32 read_tim; /* READ_TIM, R */
} omap_mpu_timer_regs_t;
#define omap_mpu_timer_base(n) \
((volatile omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE + \
(n)*OMAP_MPU_TIMER_OFFSET))
static inline unsigned long omap_mpu_timer_read(int nr)
{
volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
return timer->read_tim;
}
static inline void omap_mpu_timer_start(int nr, unsigned long load_val)
{
volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
timer->cntl = MPU_TIMER_CLOCK_ENABLE;
udelay(1);
timer->load_tim = load_val;
udelay(1);
timer->cntl = (MPU_TIMER_CLOCK_ENABLE | MPU_TIMER_AR | MPU_TIMER_ST);
}
unsigned long omap_mpu_timer_ticks_to_usecs(unsigned long nr_ticks)
{
unsigned long long nsec;
nsec = cycles_2_ns((unsigned long long)nr_ticks);
return (unsigned long)nsec / 1000;
}
/*
* Last processed system timer interrupt
*/
static unsigned long omap_mpu_timer_last = 0;
/*
* Returns elapsed usecs since last system timer interrupt
*/
static unsigned long omap_mpu_timer_gettimeoffset(void)
{
unsigned long now = 0 - omap_mpu_timer_read(0);
unsigned long elapsed = now - omap_mpu_timer_last;
return omap_mpu_timer_ticks_to_usecs(elapsed);
}
/*
* Elapsed time between interrupts is calculated using timer0.
* Latency during the interrupt is calculated using timer1.
* Both timer0 and timer1 are counting at 6MHz (P2 6.5MHz).
*/
static irqreturn_t omap_mpu_timer_interrupt(int irq, void *dev_id,
struct pt_regs *regs)
{
unsigned long now, latency;
write_seqlock(&xtime_lock);
now = 0 - omap_mpu_timer_read(0);
latency = MPU_TICKS_PER_SEC / HZ - omap_mpu_timer_read(1);
omap_mpu_timer_last = now - latency;
timer_tick(regs);
write_sequnlock(&xtime_lock);
return IRQ_HANDLED;
}
static struct irqaction omap_mpu_timer_irq = {
.name = "mpu timer",
.flags = SA_INTERRUPT,
.handler = omap_mpu_timer_interrupt
};
static unsigned long omap_mpu_timer1_overflows;
static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id,
struct pt_regs *regs)
{
omap_mpu_timer1_overflows++;
return IRQ_HANDLED;
}
static struct irqaction omap_mpu_timer1_irq = {
.name = "mpu timer1 overflow",
.flags = SA_INTERRUPT,
.handler = omap_mpu_timer1_interrupt
};
static __init void omap_init_mpu_timer(void)
{
set_cyc2ns_scale(MPU_TICKS_PER_SEC / 1000);
omap_timer.offset = omap_mpu_timer_gettimeoffset;
setup_irq(INT_TIMER1, &omap_mpu_timer1_irq);
setup_irq(INT_TIMER2, &omap_mpu_timer_irq);
omap_mpu_timer_start(0, 0xffffffff);
omap_mpu_timer_start(1, MPU_TIMER_TICK_PERIOD);
}
/*
* Scheduler clock - returns current time in nanosec units.
*/
unsigned long long sched_clock(void)
{
unsigned long ticks = 0 - omap_mpu_timer_read(0);
unsigned long long ticks64;
ticks64 = omap_mpu_timer1_overflows;
ticks64 <<= 32;
ticks64 |= ticks;
return cycles_2_ns(ticks64);
}
#endif /* CONFIG_OMAP_MPU_TIMER */
#ifdef CONFIG_OMAP_32K_TIMER
#ifdef CONFIG_ARCH_OMAP1510
#error OMAP 32KHz timer does not currently work on 1510!
#endif
/*
* ---------------------------------------------------------------------------
* 32KHz OS timer
*
* This currently works only on 16xx, as 1510 does not have the continuous
* 32KHz synchronous timer. The 32KHz synchronous timer is used to keep track
* of time in addition to the 32KHz OS timer. Using only the 32KHz OS timer
* on 1510 would be possible, but the timer would not be as accurate as
* with the 32KHz synchronized timer.
* ---------------------------------------------------------------------------
*/
#define OMAP_32K_TIMER_BASE 0xfffb9000
#define OMAP_32K_TIMER_CR 0x08
#define OMAP_32K_TIMER_TVR 0x00
#define OMAP_32K_TIMER_TCR 0x04
#define OMAP_32K_TICKS_PER_HZ (32768 / HZ)
/*
* TRM says 1 / HZ = ( TVR + 1) / 32768, so TRV = (32768 / HZ) - 1
* so with HZ = 100, TVR = 327.68.
*/
#define OMAP_32K_TIMER_TICK_PERIOD ((32768 / HZ) - 1)
#define MAX_SKIP_JIFFIES 25
#define TIMER_32K_SYNCHRONIZED 0xfffbc410
#define JIFFIES_TO_HW_TICKS(nr_jiffies, clock_rate) \
(((nr_jiffies) * (clock_rate)) / HZ)
static inline void omap_32k_timer_write(int val, int reg)
{
omap_writew(val, reg + OMAP_32K_TIMER_BASE);
}
static inline unsigned long omap_32k_timer_read(int reg)
{
return omap_readl(reg + OMAP_32K_TIMER_BASE) & 0xffffff;
}
/*
* The 32KHz synchronized timer is an additional timer on 16xx.
* It is always running.
*/
static inline unsigned long omap_32k_sync_timer_read(void)
{
return omap_readl(TIMER_32K_SYNCHRONIZED);
}
static inline void omap_32k_timer_start(unsigned long load_val)
{
omap_32k_timer_write(load_val, OMAP_32K_TIMER_TVR);
omap_32k_timer_write(0x0f, OMAP_32K_TIMER_CR);
}
static inline void omap_32k_timer_stop(void)
{
omap_32k_timer_write(0x0, OMAP_32K_TIMER_CR);
}
/*
* Rounds down to nearest usec
*/
static inline unsigned long omap_32k_ticks_to_usecs(unsigned long ticks_32k)
{
return (ticks_32k * 5*5*5*5*5*5) >> 9;
}
static unsigned long omap_32k_last_tick = 0;
/*
* Returns elapsed usecs since last 32k timer interrupt
*/
static unsigned long omap_32k_timer_gettimeoffset(void)
{
unsigned long now = omap_32k_sync_timer_read();
return omap_32k_ticks_to_usecs(now - omap_32k_last_tick);
}
/*
* Timer interrupt for 32KHz timer. When dynamic tick is enabled, this
* function is also called from other interrupts to remove latency
* issues with dynamic tick. In the dynamic tick case, we need to lock
* with irqsave.
*/
static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id,
struct pt_regs *regs)
{
unsigned long flags;
unsigned long now;
write_seqlock_irqsave(&xtime_lock, flags);
now = omap_32k_sync_timer_read();
while (now - omap_32k_last_tick >= OMAP_32K_TICKS_PER_HZ) {
omap_32k_last_tick += OMAP_32K_TICKS_PER_HZ;
timer_tick(regs);
}
/* Restart timer so we don't drift off due to modulo or dynamic tick.
* By default we program the next timer to be continuous to avoid
* latencies during high system load. During dynamic tick operation the
* continuous timer can be overridden from pm_idle to be longer.
*/
omap_32k_timer_start(omap_32k_last_tick + OMAP_32K_TICKS_PER_HZ - now);
write_sequnlock_irqrestore(&xtime_lock, flags);
return IRQ_HANDLED;
}
static struct irqaction omap_32k_timer_irq = {
.name = "32KHz timer",
.flags = SA_INTERRUPT,
.handler = omap_32k_timer_interrupt
};
static __init void omap_init_32k_timer(void)
{
setup_irq(INT_OS_TIMER, &omap_32k_timer_irq);
omap_timer.offset = omap_32k_timer_gettimeoffset;
omap_32k_last_tick = omap_32k_sync_timer_read();
omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD);
}
#endif /* CONFIG_OMAP_32K_TIMER */
/*
* ---------------------------------------------------------------------------
* Timer initialization
* ---------------------------------------------------------------------------
*/
void __init omap_timer_init(void)
{
#if defined(CONFIG_OMAP_MPU_TIMER)
omap_init_mpu_timer();
#elif defined(CONFIG_OMAP_32K_TIMER)
omap_init_32k_timer();
#else
#error No system timer selected in Kconfig!
#endif
}
struct sys_timer omap_timer = {
.init = omap_timer_init,
.offset = NULL, /* Initialized later */
};