mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-26 19:36:41 +00:00
086626a747
The default ramdisk blocksize is actually 1024, not 512 bytes. Also fixes up some trailing whitespace issues. Signed-off-by: Nathan Scott <nathans@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
168 lines
6.3 KiB
Plaintext
168 lines
6.3 KiB
Plaintext
Using the RAM disk block device with Linux
|
|
------------------------------------------
|
|
|
|
Contents:
|
|
|
|
1) Overview
|
|
2) Kernel Command Line Parameters
|
|
3) Using "rdev -r"
|
|
4) An Example of Creating a Compressed RAM Disk
|
|
|
|
|
|
1) Overview
|
|
-----------
|
|
|
|
The RAM disk driver is a way to use main system memory as a block device. It
|
|
is required for initrd, an initial filesystem used if you need to load modules
|
|
in order to access the root filesystem (see Documentation/initrd.txt). It can
|
|
also be used for a temporary filesystem for crypto work, since the contents
|
|
are erased on reboot.
|
|
|
|
The RAM disk dynamically grows as more space is required. It does this by using
|
|
RAM from the buffer cache. The driver marks the buffers it is using as dirty
|
|
so that the VM subsystem does not try to reclaim them later.
|
|
|
|
Also, the RAM disk supports up to 16 RAM disks out of the box, and can
|
|
be reconfigured to support up to 255 RAM disks - change "#define NUM_RAMDISKS"
|
|
in drivers/block/rd.c. To use RAM disk support with your system, run
|
|
'./MAKEDEV ram' from the /dev directory. RAM disks are all major number 1, and
|
|
start with minor number 0 for /dev/ram0, etc. If used, modern kernels use
|
|
/dev/ram0 for an initrd.
|
|
|
|
The old "ramdisk=<ram_size>" has been changed to "ramdisk_size=<ram_size>" to
|
|
make it clearer. The original "ramdisk=<ram_size>" has been kept around for
|
|
compatibility reasons, but it may be removed in the future.
|
|
|
|
The new RAM disk also has the ability to load compressed RAM disk images,
|
|
allowing one to squeeze more programs onto an average installation or
|
|
rescue floppy disk.
|
|
|
|
|
|
2) Kernel Command Line Parameters
|
|
---------------------------------
|
|
|
|
ramdisk_size=N
|
|
==============
|
|
|
|
This parameter tells the RAM disk driver to set up RAM disks of N k size. The
|
|
default is 4096 (4 MB) (8192 (8 MB) on S390).
|
|
|
|
ramdisk_blocksize=N
|
|
===================
|
|
|
|
This parameter tells the RAM disk driver how many bytes to use per block. The
|
|
default is 1024 (BLOCK_SIZE).
|
|
|
|
|
|
3) Using "rdev -r"
|
|
------------------
|
|
|
|
The usage of the word (two bytes) that "rdev -r" sets in the kernel image is
|
|
as follows. The low 11 bits (0 -> 10) specify an offset (in 1 k blocks) of up
|
|
to 2 MB (2^11) of where to find the RAM disk (this used to be the size). Bit
|
|
14 indicates that a RAM disk is to be loaded, and bit 15 indicates whether a
|
|
prompt/wait sequence is to be given before trying to read the RAM disk. Since
|
|
the RAM disk dynamically grows as data is being written into it, a size field
|
|
is not required. Bits 11 to 13 are not currently used and may as well be zero.
|
|
These numbers are no magical secrets, as seen below:
|
|
|
|
./arch/i386/kernel/setup.c:#define RAMDISK_IMAGE_START_MASK 0x07FF
|
|
./arch/i386/kernel/setup.c:#define RAMDISK_PROMPT_FLAG 0x8000
|
|
./arch/i386/kernel/setup.c:#define RAMDISK_LOAD_FLAG 0x4000
|
|
|
|
Consider a typical two floppy disk setup, where you will have the
|
|
kernel on disk one, and have already put a RAM disk image onto disk #2.
|
|
|
|
Hence you want to set bits 0 to 13 as 0, meaning that your RAM disk
|
|
starts at an offset of 0 kB from the beginning of the floppy.
|
|
The command line equivalent is: "ramdisk_start=0"
|
|
|
|
You want bit 14 as one, indicating that a RAM disk is to be loaded.
|
|
The command line equivalent is: "load_ramdisk=1"
|
|
|
|
You want bit 15 as one, indicating that you want a prompt/keypress
|
|
sequence so that you have a chance to switch floppy disks.
|
|
The command line equivalent is: "prompt_ramdisk=1"
|
|
|
|
Putting that together gives 2^15 + 2^14 + 0 = 49152 for an rdev word.
|
|
So to create disk one of the set, you would do:
|
|
|
|
/usr/src/linux# cat arch/i386/boot/zImage > /dev/fd0
|
|
/usr/src/linux# rdev /dev/fd0 /dev/fd0
|
|
/usr/src/linux# rdev -r /dev/fd0 49152
|
|
|
|
If you make a boot disk that has LILO, then for the above, you would use:
|
|
append = "ramdisk_start=0 load_ramdisk=1 prompt_ramdisk=1"
|
|
Since the default start = 0 and the default prompt = 1, you could use:
|
|
append = "load_ramdisk=1"
|
|
|
|
|
|
4) An Example of Creating a Compressed RAM Disk
|
|
----------------------------------------------
|
|
|
|
To create a RAM disk image, you will need a spare block device to
|
|
construct it on. This can be the RAM disk device itself, or an
|
|
unused disk partition (such as an unmounted swap partition). For this
|
|
example, we will use the RAM disk device, "/dev/ram0".
|
|
|
|
Note: This technique should not be done on a machine with less than 8 MB
|
|
of RAM. If using a spare disk partition instead of /dev/ram0, then this
|
|
restriction does not apply.
|
|
|
|
a) Decide on the RAM disk size that you want. Say 2 MB for this example.
|
|
Create it by writing to the RAM disk device. (This step is not currently
|
|
required, but may be in the future.) It is wise to zero out the
|
|
area (esp. for disks) so that maximal compression is achieved for
|
|
the unused blocks of the image that you are about to create.
|
|
|
|
dd if=/dev/zero of=/dev/ram0 bs=1k count=2048
|
|
|
|
b) Make a filesystem on it. Say ext2fs for this example.
|
|
|
|
mke2fs -vm0 /dev/ram0 2048
|
|
|
|
c) Mount it, copy the files you want to it (eg: /etc/* /dev/* ...)
|
|
and unmount it again.
|
|
|
|
d) Compress the contents of the RAM disk. The level of compression
|
|
will be approximately 50% of the space used by the files. Unused
|
|
space on the RAM disk will compress to almost nothing.
|
|
|
|
dd if=/dev/ram0 bs=1k count=2048 | gzip -v9 > /tmp/ram_image.gz
|
|
|
|
e) Put the kernel onto the floppy
|
|
|
|
dd if=zImage of=/dev/fd0 bs=1k
|
|
|
|
f) Put the RAM disk image onto the floppy, after the kernel. Use an offset
|
|
that is slightly larger than the kernel, so that you can put another
|
|
(possibly larger) kernel onto the same floppy later without overlapping
|
|
the RAM disk image. An offset of 400 kB for kernels about 350 kB in
|
|
size would be reasonable. Make sure offset+size of ram_image.gz is
|
|
not larger than the total space on your floppy (usually 1440 kB).
|
|
|
|
dd if=/tmp/ram_image.gz of=/dev/fd0 bs=1k seek=400
|
|
|
|
g) Use "rdev" to set the boot device, RAM disk offset, prompt flag, etc.
|
|
For prompt_ramdisk=1, load_ramdisk=1, ramdisk_start=400, one would
|
|
have 2^15 + 2^14 + 400 = 49552.
|
|
|
|
rdev /dev/fd0 /dev/fd0
|
|
rdev -r /dev/fd0 49552
|
|
|
|
That is it. You now have your boot/root compressed RAM disk floppy. Some
|
|
users may wish to combine steps (d) and (f) by using a pipe.
|
|
|
|
--------------------------------------------------------------------------
|
|
Paul Gortmaker 12/95
|
|
|
|
Changelog:
|
|
----------
|
|
|
|
10-22-04 : Updated to reflect changes in command line options, remove
|
|
obsolete references, general cleanup.
|
|
James Nelson (james4765@gmail.com)
|
|
|
|
|
|
12-95 : Original Document
|