eric miao 2f1a74e5a2 [ARM] pxa: make pxa2xx_spi driver use ssp_request()/ssp_free() ... 1. make pxa2xx_spi.c use ssp_request() and ssp_free() to get the common information of the designated SSP port. 2. remove those IRQ/memory request code, ssp_request() has done that for the driver 3. the SPI platform device is thus made psuedo, no resource (memory/IRQ) has to be defined, all will be retreived by ssp_request() 4. introduce ssp_get_clk_div() to handle controller difference in clock divisor setting 5. use clk_xxx() API for clock enable/disable, and clk_get_rate() to handle the different SSP clock frequency between different processors Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>		2008-01-26 15:07:52 +00:00
..
at25.c
atmel_spi.c
atmel_spi.h
au1550_spi.c
Kconfig	[ARM] pxa: make pxa2xx_spi driver use ssp_request()/ssp_free()	2008-01-26 15:07:52 +00:00
Makefile
mpc52xx_psc_spi.c
omap2_mcspi.c
omap_uwire.c
pxa2xx_spi.c	[ARM] pxa: make pxa2xx_spi driver use ssp_request()/ssp_free()	2008-01-26 15:07:52 +00:00
spi_bfin5xx.c
spi_bitbang.c
spi_butterfly.c
spi_imx.c
spi_lm70llp.c
spi_mpc83xx.c
spi_s3c24xx_gpio.c
spi_s3c24xx.c
spi_txx9.c
spi.c
spidev.c
tle62x0.c
xilinx_spi.c