Ben Dooks d1e7780638 spi: spi_s3c24xx must initialize num_chipselect ... The SPI core now expects num_chipselect to be set correctly as due to added checks on the chip being selected before an transfer is allowed. This patch adds a num_cs field to the platform data which needs to be set correctly before adding the SPI platform device. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>		2008-04-15 19:35:41 -07:00
..
anubis-cpld.h	[ARM] 4445/1: ANUBIS: Fix CPLD registers	2007-06-11 09:09:34 +01:00
anubis-irq.h
anubis-map.h	[ARM] 4445/1: ANUBIS: Fix CPLD registers	2007-06-11 09:09:34 +01:00
audio.h
bast-cpld.h
bast-irq.h
bast-map.h
bast-pmu.h
debug-macro.S	[ARM] 4792/1: S3C24XX: Remove warnings from debug-macro.S	2008-01-28 13:20:52 +00:00
dma.h	[ARM] 4781/1: S3C24XX: DMA suspend and resume support	2008-01-28 13:20:51 +00:00
entry-macro.S
fb.h	s3c2410fb: removes lcdcon1 register value from s3c2410fb_display	2007-10-16 09:43:18 -07:00
gpio.h
h1940-latch.h
h1940.h
hardware.h	[ARM] 4793/1: S3C24XX: Add IRQ->GPIO pin mapping function	2008-01-28 13:20:52 +00:00
idle.h
io.h
irqs.h	[ARM] 4872/1: Replaces buggy macro in S3C2410 irq include	2008-03-20 15:59:32 +00:00
leds-gpio.h
map.h	[ARM] 4521/2: S3C: Reorganise VA mapping headers	2007-07-22 17:06:02 +01:00
memory.h	[ARM] 4522/1: S3C: split include/asm-arm/arch/memory.h	2007-07-22 17:06:04 +01:00
osiris-cpld.h	[ARM] 4444/2: OSIRIS: CPLD suspend fix	2007-06-11 09:09:31 +01:00
osiris-map.h	[ARM] 4442/1: OSIRIS: Fix CPLD register definitions	2007-06-11 09:09:15 +01:00
otom-map.h
regs-clock.h	[ARM] 4789/1: S3C2412: Add missing CLKDIVN register values	2008-01-28 13:20:52 +00:00
regs-dsc.h	[ARM] 4775/1: s3c2410: fix compilation error if only s3c2442 cpu is selected	2008-01-28 13:20:50 +00:00
regs-gpio.h	[ARM] 4779/1: S3C2412: Add s3c2412_gpio_set_sleepcfg() call	2008-01-28 13:20:50 +00:00
regs-gpioj.h	[ARM] 4401/1: S3C2443: Add definitions for port GPIOJ	2007-05-26 10:09:38 +01:00
regs-irq.h
regs-lcd.h	FB/S3C2412: add S3C2412 support to S3C2410 fb driver	2008-02-06 10:41:17 -08:00
regs-mem.h	[ARM] 4785/1: S3C24XX: Add _SHIFT definitions for S3C2410_BANKCON registers	2008-01-28 13:20:51 +00:00
regs-power.h	[ARM] 4720/1: S3C2412: Add power configuration registers for battery flat behaviour.	2008-01-28 13:20:48 +00:00
regs-s3c2412.h	[ARM] 4586/1: S3C2412: power register updates	2007-10-12 23:43:28 +01:00
regs-s3c2443-clock.h
regs-sdi.h
reset.h
spi-gpio.h	spi: s3c drivers shouldn't care about spi_board_info	2008-02-06 10:41:11 -08:00
spi.h	spi: spi_s3c24xx must initialize num_chipselect	2008-04-15 19:35:41 -07:00
system.h	[ARM] 4722/1: S3C24XX: Improve output if watchdog reset fails	2008-01-28 13:20:49 +00:00
timex.h
uncompress.h	[ARM] 4523/1: S3C: Remove FIFO_MAX from uncompression headers	2007-07-22 17:06:05 +01:00
usb-control.h
vmalloc.h
vr1000-cpld.h
vr1000-irq.h
vr1000-map.h