Sergei Shtylyov d57019d185 at803x: fix reset handling
The driver of course "knows" that the chip's reset signal is active low,
so  it drives the GPIO to 0  to reset the PHY and to 1 otherwise; however
all this will only work iff the GPIO  is  specified as active-high in the
device tree!  I think both the driver and the device trees (if there are
any -- I was unable to find them) need to be fixed in this case...

Fixes: 13a56b449325 ("net: phy: at803x: Add support for hardware reset")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-23 13:38:40 -04:00
..
2016-03-16 17:45:56 -07:00
2016-03-01 16:38:16 -08:00
2016-03-14 14:22:03 +01:00
2016-03-17 12:34:54 -07:00
2016-03-16 08:36:55 -07:00
2016-03-18 10:15:11 -07:00
2016-03-17 13:47:50 -07:00
2016-03-18 10:15:11 -07:00
2016-03-18 10:15:11 -07:00
2016-03-18 10:15:11 -07:00
2016-03-19 15:38:41 -07:00
2016-03-17 13:53:25 -07:00
2016-03-23 13:38:40 -04:00
2016-03-19 15:15:07 -07:00
2016-03-19 15:38:41 -07:00
2016-03-05 12:22:41 -08:00
2016-03-18 10:15:11 -07:00
2016-03-17 13:53:25 -07:00
2016-03-19 15:38:41 -07:00
2016-03-04 12:12:08 +01:00
2016-03-19 15:38:41 -07:00
2016-03-17 12:34:54 -07:00
2016-02-26 12:47:32 +02:00
2016-03-17 13:05:09 -07:00