FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2024-12-28 04:17:47 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
d7cabeed83
linux/arch/arm/mach-spear/spear320.c
Arnd Bergmann d9909ebe65 ARM: spear: make clock driver independent of headers 
Device drivers should not access MMIO registers through hardcoded
platform specific address constants. Instead, we can pass the
MMIO token to the spear clock driver in the initialization routine
to contain that knowledge in the platform code itself.

Ideally, the clock driver would use of_iomap() or similar to
get the address, and that can be used later, but for now, this
is the minimal change.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2013-03-12 17:39:58 +01:00

278 lines
6.0 KiB
C
Raw Blame History

/*
* arch/arm/mach-spear3xx/spear320.c
*
* SPEAr320 machine source file
*
* Copyright (C) 2009-2012 ST Microelectronics
* Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#define pr_fmt(fmt) "SPEAr320: " fmt
#include <linux/amba/pl022.h>
#include <linux/amba/pl08x.h>
#include <linux/amba/serial.h>
#include <linux/irqchip.h>
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "generic.h"
#include <mach/spear.h>
#define SPEAR320_UART1_BASE UL(0xA3000000)
#define SPEAR320_UART2_BASE UL(0xA4000000)
#define SPEAR320_SSP0_BASE UL(0xA5000000)
#define SPEAR320_SSP1_BASE UL(0xA6000000)
/* DMAC platform data's slave info */
struct pl08x_channel_data spear320_dma_info[] = {
{
.bus_id = "uart0_rx",
.min_signal = 2,
.max_signal = 2,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart0_tx",
.min_signal = 3,
.max_signal = 3,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ssp0_rx",
.min_signal = 8,
.max_signal = 8,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ssp0_tx",
.min_signal = 9,
.max_signal = 9,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "i2c0_rx",
.min_signal = 10,
.max_signal = 10,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "i2c0_tx",
.min_signal = 11,
.max_signal = 11,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "irda",
.min_signal = 12,
.max_signal = 12,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "adc",
.min_signal = 13,
.max_signal = 13,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "to_jpeg",
.min_signal = 14,
.max_signal = 14,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "from_jpeg",
.min_signal = 15,
.max_signal = 15,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ssp1_rx",
.min_signal = 0,
.max_signal = 0,
.muxval = 1,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ssp1_tx",
.min_signal = 1,
.max_signal = 1,
.muxval = 1,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ssp2_rx",
.min_signal = 2,
.max_signal = 2,
.muxval = 1,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ssp2_tx",
.min_signal = 3,
.max_signal = 3,
.muxval = 1,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "uart1_rx",
.min_signal = 4,
.max_signal = 4,
.muxval = 1,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "uart1_tx",
.min_signal = 5,
.max_signal = 5,
.muxval = 1,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "uart2_rx",
.min_signal = 6,
.max_signal = 6,
.muxval = 1,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "uart2_tx",
.min_signal = 7,
.max_signal = 7,
.muxval = 1,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "i2c1_rx",
.min_signal = 8,
.max_signal = 8,
.muxval = 1,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "i2c1_tx",
.min_signal = 9,
.max_signal = 9,
.muxval = 1,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "i2c2_rx",
.min_signal = 10,
.max_signal = 10,
.muxval = 1,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "i2c2_tx",
.min_signal = 11,
.max_signal = 11,
.muxval = 1,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "i2s_rx",
.min_signal = 12,
.max_signal = 12,
.muxval = 1,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "i2s_tx",
.min_signal = 13,
.max_signal = 13,
.muxval = 1,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "rs485_rx",
.min_signal = 14,
.max_signal = 14,
.muxval = 1,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "rs485_tx",
.min_signal = 15,
.max_signal = 15,
.muxval = 1,
.periph_buses = PL08X_AHB2,
},
};
static struct pl022_ssp_controller spear320_ssp_data[] = {
{
.bus_id = 1,
.enable_dma = 1,
.dma_filter = pl08x_filter_id,
.dma_tx_param = "ssp1_tx",
.dma_rx_param = "ssp1_rx",
.num_chipselect = 2,
}, {
.bus_id = 2,
.enable_dma = 1,
.dma_filter = pl08x_filter_id,
.dma_tx_param = "ssp2_tx",
.dma_rx_param = "ssp2_rx",
.num_chipselect = 2,
}
};
static struct amba_pl011_data spear320_uart_data[] = {
{
.dma_filter = pl08x_filter_id,
.dma_tx_param = "uart1_tx",
.dma_rx_param = "uart1_rx",
}, {
.dma_filter = pl08x_filter_id,
.dma_tx_param = "uart2_tx",
.dma_rx_param = "uart2_rx",
},
};
/* Add SPEAr310 auxdata to pass platform data */
static struct of_dev_auxdata spear320_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
&pl022_plat_data),
OF_DEV_AUXDATA("arm,pl080", SPEAR_ICM3_DMA_BASE, NULL,
&pl080_plat_data),
OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP0_BASE, NULL,
&spear320_ssp_data[0]),
OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP1_BASE, NULL,
&spear320_ssp_data[1]),
OF_DEV_AUXDATA("arm,pl011", SPEAR320_UART1_BASE, NULL,
&spear320_uart_data[0]),
OF_DEV_AUXDATA("arm,pl011", SPEAR320_UART2_BASE, NULL,
&spear320_uart_data[1]),
{}
};
static void __init spear320_dt_init(void)
{
pl080_plat_data.slave_channels = spear320_dma_info;
pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear320_dma_info);
of_platform_populate(NULL, of_default_bus_match_table,
spear320_auxdata_lookup, NULL);
}
static const char * const spear320_dt_board_compat[] = {
"st,spear320",
"st,spear320-evb",
"st,spear320-hmi",
NULL,
};
struct map_desc spear320_io_desc[] __initdata = {
{
.virtual = (unsigned long)VA_SPEAR320_SOC_CONFIG_BASE,
.pfn = __phys_to_pfn(SPEAR320_SOC_CONFIG_BASE),
.length = SZ_16M,
.type = MT_DEVICE
},
};
static void __init spear320_map_io(void)
{
iotable_init(spear320_io_desc, ARRAY_SIZE(spear320_io_desc));
spear3xx_map_io();
}
DT_MACHINE_START(SPEAR320_DT, "ST SPEAr320 SoC with Flattened Device Tree")
.map_io = spear320_map_io,
.init_irq = irqchip_init,
.init_time = spear3xx_timer_init,
.init_machine = spear320_dt_init,
.restart = spear_restart,
.dt_compat = spear320_dt_board_compat,
MACHINE_END
Reference in New Issue View Git Blame Copy Permalink