linux/sound/soc/blackfin/bf5xx-ac97.c
Cliff Cai 6b58a82121 ALSA: ASoC Blackfin: fix bug - Audio Latency on AD1981 with MMAP enabled
With MMAP enabled (DMA mode) on the AD1981, there is +/- 250ms of delay between
writing data to alsa and audio starts coming out of the AD1981.

Copy more data to local buffer before starting DMA

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-13 02:16:30 +02:00

407 lines
11 KiB
C

/*
* bf5xx-ac97.c -- AC97 support for the ADI blackfin chip.
*
* Author: Roy Huang
* Created: 11th. June 2007
* Copyright: Analog Device Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/wait.h>
#include <linux/delay.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/ac97_codec.h>
#include <sound/initval.h>
#include <sound/soc.h>
#include <asm/irq.h>
#include <asm/portmux.h>
#include <linux/mutex.h>
#include <linux/gpio.h>
#include "bf5xx-sport.h"
#include "bf5xx-ac97.h"
#if defined(CONFIG_BF54x)
#define PIN_REQ_SPORT_0 {P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, \
P_SPORT0_RFS, P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0}
#define PIN_REQ_SPORT_1 {P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, \
P_SPORT1_RFS, P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0}
#define PIN_REQ_SPORT_2 {P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, \
P_SPORT2_RFS, P_SPORT2_DRPRI, P_SPORT2_RSCLK, 0}
#define PIN_REQ_SPORT_3 {P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, \
P_SPORT3_RFS, P_SPORT3_DRPRI, P_SPORT3_RSCLK, 0}
#else
#define PIN_REQ_SPORT_0 {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, \
P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0}
#define PIN_REQ_SPORT_1 {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, \
P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0}
#endif
static int *cmd_count;
static int sport_num = CONFIG_SND_BF5XX_SPORT_NUM;
#if defined(CONFIG_BF54x)
static struct sport_param sport_params[4] = {
{
.dma_rx_chan = CH_SPORT0_RX,
.dma_tx_chan = CH_SPORT0_TX,
.err_irq = IRQ_SPORT0_ERR,
.regs = (struct sport_register *)SPORT0_TCR1,
},
{
.dma_rx_chan = CH_SPORT1_RX,
.dma_tx_chan = CH_SPORT1_TX,
.err_irq = IRQ_SPORT1_ERR,
.regs = (struct sport_register *)SPORT1_TCR1,
},
{
.dma_rx_chan = CH_SPORT2_RX,
.dma_tx_chan = CH_SPORT2_TX,
.err_irq = IRQ_SPORT2_ERR,
.regs = (struct sport_register *)SPORT2_TCR1,
},
{
.dma_rx_chan = CH_SPORT3_RX,
.dma_tx_chan = CH_SPORT3_TX,
.err_irq = IRQ_SPORT3_ERR,
.regs = (struct sport_register *)SPORT3_TCR1,
}
};
#else
static struct sport_param sport_params[2] = {
{
.dma_rx_chan = CH_SPORT0_RX,
.dma_tx_chan = CH_SPORT0_TX,
.err_irq = IRQ_SPORT0_ERROR,
.regs = (struct sport_register *)SPORT0_TCR1,
},
{
.dma_rx_chan = CH_SPORT1_RX,
.dma_tx_chan = CH_SPORT1_TX,
.err_irq = IRQ_SPORT1_ERROR,
.regs = (struct sport_register *)SPORT1_TCR1,
}
};
#endif
void bf5xx_pcm_to_ac97(struct ac97_frame *dst, const __u32 *src, \
size_t count)
{
while (count--) {
dst->ac97_tag = TAG_VALID | TAG_PCM;
(dst++)->ac97_pcm = *src++;
}
}
EXPORT_SYMBOL(bf5xx_pcm_to_ac97);
void bf5xx_ac97_to_pcm(const struct ac97_frame *src, __u32 *dst, \
size_t count)
{
while (count--)
*(dst++) = (src++)->ac97_pcm;
}
EXPORT_SYMBOL(bf5xx_ac97_to_pcm);
static unsigned int sport_tx_curr_frag(struct sport_device *sport)
{
return sport->tx_curr_frag = sport_curr_offset_tx(sport) / \
sport->tx_fragsize;
}
static void enqueue_cmd(struct snd_ac97 *ac97, __u16 addr, __u16 data)
{
struct sport_device *sport = sport_handle;
int nextfrag = sport_tx_curr_frag(sport);
struct ac97_frame *nextwrite;
sport_incfrag(sport, &nextfrag, 1);
nextwrite = (struct ac97_frame *)(sport->tx_buf + \
nextfrag * sport->tx_fragsize);
pr_debug("sport->tx_buf:%p, nextfrag:0x%x nextwrite:%p, cmd_count:%d\n",
sport->tx_buf, nextfrag, nextwrite, cmd_count[nextfrag]);
nextwrite[cmd_count[nextfrag]].ac97_tag |= TAG_CMD;
nextwrite[cmd_count[nextfrag]].ac97_addr = addr;
nextwrite[cmd_count[nextfrag]].ac97_data = data;
++cmd_count[nextfrag];
pr_debug("ac97_sport: Inserting %02x/%04x into fragment %d\n",
addr >> 8, data, nextfrag);
}
static unsigned short bf5xx_ac97_read(struct snd_ac97 *ac97,
unsigned short reg)
{
struct ac97_frame out_frame[2], in_frame[2];
pr_debug("%s enter 0x%x\n", __func__, reg);
/* When dma descriptor is enabled, the register should not be read */
if (sport_handle->tx_run || sport_handle->rx_run) {
pr_err("Could you send a mail to cliff.cai@analog.com "
"to report this?\n");
return -EFAULT;
}
memset(&out_frame, 0, 2 * sizeof(struct ac97_frame));
memset(&in_frame, 0, 2 * sizeof(struct ac97_frame));
out_frame[0].ac97_tag = TAG_VALID | TAG_CMD;
out_frame[0].ac97_addr = ((reg << 8) | 0x8000);
sport_send_and_recv(sport_handle, (unsigned char *)&out_frame,
(unsigned char *)&in_frame,
2 * sizeof(struct ac97_frame));
return in_frame[1].ac97_data;
}
void bf5xx_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
unsigned short val)
{
pr_debug("%s enter 0x%x:0x%04x\n", __func__, reg, val);
if (sport_handle->tx_run) {
enqueue_cmd(ac97, (reg << 8), val); /* write */
enqueue_cmd(ac97, (reg << 8) | 0x8000, 0); /* read back */
} else {
struct ac97_frame frame;
memset(&frame, 0, sizeof(struct ac97_frame));
frame.ac97_tag = TAG_VALID | TAG_CMD;
frame.ac97_addr = (reg << 8);
frame.ac97_data = val;
sport_send_and_recv(sport_handle, (unsigned char *)&frame, \
NULL, sizeof(struct ac97_frame));
}
}
static void bf5xx_ac97_warm_reset(struct snd_ac97 *ac97)
{
#if defined(CONFIG_BF54x) || defined(CONFIG_BF561) || \
(defined(BF537_FAMILY) && (CONFIG_SND_BF5XX_SPORT_NUM == 1))
#define CONCAT(a, b, c) a ## b ## c
#define BFIN_SPORT_RFS(x) CONCAT(P_SPORT, x, _RFS)
u16 per = BFIN_SPORT_RFS(CONFIG_SND_BF5XX_SPORT_NUM);
u16 gpio = P_IDENT(BFIN_SPORT_RFS(CONFIG_SND_BF5XX_SPORT_NUM));
pr_debug("%s enter\n", __func__);
peripheral_free(per);
gpio_request(gpio, "bf5xx-ac97");
gpio_direction_output(gpio, 1);
udelay(2);
gpio_set_value(gpio, 0);
udelay(1);
gpio_free(gpio);
peripheral_request(per, "soc-audio");
#else
pr_info("%s: Not implemented\n", __func__);
#endif
}
static void bf5xx_ac97_cold_reset(struct snd_ac97 *ac97)
{
#ifdef CONFIG_SND_BF5XX_HAVE_COLD_RESET
pr_debug("%s enter\n", __func__);
/* It is specified for bf548-ezkit */
gpio_set_value(CONFIG_SND_BF5XX_RESET_GPIO_NUM, 0);
/* Keep reset pin low for 1 ms */
mdelay(1);
gpio_set_value(CONFIG_SND_BF5XX_RESET_GPIO_NUM, 1);
/* Wait for bit clock recover */
mdelay(1);
#else
pr_info("%s: Not implemented\n", __func__);
#endif
}
struct snd_ac97_bus_ops soc_ac97_ops = {
.read = bf5xx_ac97_read,
.write = bf5xx_ac97_write,
.warm_reset = bf5xx_ac97_warm_reset,
.reset = bf5xx_ac97_cold_reset,
};
EXPORT_SYMBOL_GPL(soc_ac97_ops);
#ifdef CONFIG_PM
static int bf5xx_ac97_suspend(struct platform_device *pdev,
struct snd_soc_dai *dai)
{
struct sport_device *sport =
(struct sport_device *)dai->private_data;
pr_debug("%s : sport %d\n", __func__, dai->id);
if (!dai->active)
return 0;
if (dai->capture.active)
sport_rx_stop(sport);
if (dai->playback.active)
sport_tx_stop(sport);
return 0;
}
static int bf5xx_ac97_resume(struct platform_device *pdev,
struct snd_soc_dai *dai)
{
int ret;
struct sport_device *sport =
(struct sport_device *)dai->private_data;
pr_debug("%s : sport %d\n", __func__, dai->id);
if (!dai->active)
return 0;
ret = sport_set_multichannel(sport_handle, 16, 0x1F, 1);
if (ret) {
pr_err("SPORT is busy!\n");
return -EBUSY;
}
ret = sport_config_rx(sport_handle, IRFS, 0xF, 0, (16*16-1));
if (ret) {
pr_err("SPORT is busy!\n");
return -EBUSY;
}
ret = sport_config_tx(sport_handle, ITFS, 0xF, 0, (16*16-1));
if (ret) {
pr_err("SPORT is busy!\n");
return -EBUSY;
}
if (dai->capture.active)
sport_rx_start(sport);
if (dai->playback.active)
sport_tx_start(sport);
return 0;
}
#else
#define bf5xx_ac97_suspend NULL
#define bf5xx_ac97_resume NULL
#endif
static int bf5xx_ac97_probe(struct platform_device *pdev,
struct snd_soc_dai *dai)
{
int ret;
#if defined(CONFIG_BF54x)
u16 sport_req[][7] = {PIN_REQ_SPORT_0, PIN_REQ_SPORT_1,
PIN_REQ_SPORT_2, PIN_REQ_SPORT_3};
#else
u16 sport_req[][7] = {PIN_REQ_SPORT_0, PIN_REQ_SPORT_1};
#endif
cmd_count = (int *)get_zeroed_page(GFP_KERNEL);
if (cmd_count == NULL)
return -ENOMEM;
if (peripheral_request_list(&sport_req[sport_num][0], "soc-audio")) {
pr_err("Requesting Peripherals failed\n");
return -EFAULT;
}
#ifdef CONFIG_SND_BF5XX_HAVE_COLD_RESET
/* Request PB3 as reset pin */
if (gpio_request(CONFIG_SND_BF5XX_RESET_GPIO_NUM, "SND_AD198x RESET")) {
pr_err("Failed to request GPIO_%d for reset\n",
CONFIG_SND_BF5XX_RESET_GPIO_NUM);
peripheral_free_list(&sport_req[sport_num][0]);
return -1;
}
gpio_direction_output(CONFIG_SND_BF5XX_RESET_GPIO_NUM, 1);
#endif
sport_handle = sport_init(&sport_params[sport_num], 2, \
sizeof(struct ac97_frame), NULL);
if (!sport_handle) {
peripheral_free_list(&sport_req[sport_num][0]);
#ifdef CONFIG_SND_BF5XX_HAVE_COLD_RESET
gpio_free(CONFIG_SND_BF5XX_RESET_GPIO_NUM);
#endif
return -ENODEV;
}
/*SPORT works in TDM mode to simulate AC97 transfers*/
ret = sport_set_multichannel(sport_handle, 16, 0x1F, 1);
if (ret) {
pr_err("SPORT is busy!\n");
kfree(sport_handle);
peripheral_free_list(&sport_req[sport_num][0]);
#ifdef CONFIG_SND_BF5XX_HAVE_COLD_RESET
gpio_free(CONFIG_SND_BF5XX_RESET_GPIO_NUM);
#endif
return -EBUSY;
}
ret = sport_config_rx(sport_handle, IRFS, 0xF, 0, (16*16-1));
if (ret) {
pr_err("SPORT is busy!\n");
kfree(sport_handle);
peripheral_free_list(&sport_req[sport_num][0]);
#ifdef CONFIG_SND_BF5XX_HAVE_COLD_RESET
gpio_free(CONFIG_SND_BF5XX_RESET_GPIO_NUM);
#endif
return -EBUSY;
}
ret = sport_config_tx(sport_handle, ITFS, 0xF, 0, (16*16-1));
if (ret) {
pr_err("SPORT is busy!\n");
kfree(sport_handle);
peripheral_free_list(&sport_req[sport_num][0]);
#ifdef CONFIG_SND_BF5XX_HAVE_COLD_RESET
gpio_free(CONFIG_SND_BF5XX_RESET_GPIO_NUM);
#endif
return -EBUSY;
}
return 0;
}
static void bf5xx_ac97_remove(struct platform_device *pdev,
struct snd_soc_dai *dai)
{
free_page((unsigned long)cmd_count);
cmd_count = NULL;
#ifdef CONFIG_SND_BF5XX_HAVE_COLD_RESET
gpio_free(CONFIG_SND_BF5XX_RESET_GPIO_NUM);
#endif
}
struct snd_soc_dai bfin_ac97_dai = {
.name = "bf5xx-ac97",
.id = 0,
.type = SND_SOC_DAI_AC97,
.probe = bf5xx_ac97_probe,
.remove = bf5xx_ac97_remove,
.suspend = bf5xx_ac97_suspend,
.resume = bf5xx_ac97_resume,
.playback = {
.stream_name = "AC97 Playback",
.channels_min = 2,
.channels_max = 2,
.rates = SNDRV_PCM_RATE_48000,
.formats = SNDRV_PCM_FMTBIT_S16_LE, },
.capture = {
.stream_name = "AC97 Capture",
.channels_min = 2,
.channels_max = 2,
.rates = SNDRV_PCM_RATE_48000,
.formats = SNDRV_PCM_FMTBIT_S16_LE, },
};
EXPORT_SYMBOL_GPL(bfin_ac97_dai);
MODULE_AUTHOR("Roy Huang");
MODULE_DESCRIPTION("AC97 driver for ADI Blackfin");
MODULE_LICENSE("GPL");