FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2024-12-22 17:33:01 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
de8ed820fd
linux/drivers/rtc/rtc-spear.c
Deepak Sikri c9f5c7e7a8 rtc: rtc-spear: Provide flag for no support of UIE mode 
The applications can set the RTC hardware to trigger interrupts in one
of three modes:
    * AIE: Alarm interrupt
    * UIE: Update interrupt (ie: once per second)
    * PIE: Periodic interrupt (sub-second irqs)

The above defined 3 modes are to be supported in the RTC HW in form of
interrupts. The SPEAr RTC hardware does not support the later two modes.

There have been refinements in the RTC core in mainline related to
use of timer queue infrastructure to manage events in RTC. Please refer
the below mentioned patch for details:
	* RTC: Rework RTC code to use timerqueue for events
	* SHA ID: 6610e0893b

There have been provisions added to support hardware that do not have
support the UIE mode. Please refer the following patch.
	* rtc: Provide flag for rtc devices that don't support UIE
	* SHA ID: 4a649903f9

The patch makes use of the provision defined in the above patch to
update the hardware status of UIE mode.

Signed-off-by: Deepak Sikri <deepak.sikri@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17 17:15:21 -08:00

518 lines
13 KiB
C
Raw Blame History

/*
* drivers/rtc/rtc-spear.c
*
* Copyright (C) 2010 ST Microelectronics
* Rajeev Kumar<rajeev-dlh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/bcd.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/rtc.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
/* RTC registers */
#define TIME_REG 0x00
#define DATE_REG 0x04
#define ALARM_TIME_REG 0x08
#define ALARM_DATE_REG 0x0C
#define CTRL_REG 0x10
#define STATUS_REG 0x14
/* TIME_REG & ALARM_TIME_REG */
#define SECONDS_UNITS (0xf<<0) /* seconds units position */
#define SECONDS_TENS (0x7<<4) /* seconds tens position */
#define MINUTES_UNITS (0xf<<8) /* minutes units position */
#define MINUTES_TENS (0x7<<12) /* minutes tens position */
#define HOURS_UNITS (0xf<<16) /* hours units position */
#define HOURS_TENS (0x3<<20) /* hours tens position */
/* DATE_REG & ALARM_DATE_REG */
#define DAYS_UNITS (0xf<<0) /* days units position */
#define DAYS_TENS (0x3<<4) /* days tens position */
#define MONTHS_UNITS (0xf<<8) /* months units position */
#define MONTHS_TENS (0x1<<12) /* months tens position */
#define YEARS_UNITS (0xf<<16) /* years units position */
#define YEARS_TENS (0xf<<20) /* years tens position */
#define YEARS_HUNDREDS (0xf<<24) /* years hundereds position */
#define YEARS_MILLENIUMS (0xf<<28) /* years millenium position */
/* MASK SHIFT TIME_REG & ALARM_TIME_REG*/
#define SECOND_SHIFT 0x00 /* seconds units */
#define MINUTE_SHIFT 0x08 /* minutes units position */
#define HOUR_SHIFT 0x10 /* hours units position */
#define MDAY_SHIFT 0x00 /* Month day shift */
#define MONTH_SHIFT 0x08 /* Month shift */
#define YEAR_SHIFT 0x10 /* Year shift */
#define SECOND_MASK 0x7F
#define MIN_MASK 0x7F
#define HOUR_MASK 0x3F
#define DAY_MASK 0x3F
#define MONTH_MASK 0x7F
#define YEAR_MASK 0xFFFF
/* date reg equal to time reg, for debug only */
#define TIME_BYP (1<<9)
#define INT_ENABLE (1<<31) /* interrupt enable */
/* STATUS_REG */
#define CLK_UNCONNECTED (1<<0)
#define PEND_WR_TIME (1<<2)
#define PEND_WR_DATE (1<<3)
#define LOST_WR_TIME (1<<4)
#define LOST_WR_DATE (1<<5)
#define RTC_INT_MASK (1<<31)
#define STATUS_BUSY (PEND_WR_TIME | PEND_WR_DATE)
#define STATUS_FAIL (LOST_WR_TIME | LOST_WR_DATE)
struct spear_rtc_config {
struct rtc_device *rtc;
struct clk *clk;
spinlock_t lock;
void __iomem *ioaddr;
unsigned int irq_wake;
};
static inline void spear_rtc_clear_interrupt(struct spear_rtc_config *config)
{
unsigned int val;
unsigned long flags;
spin_lock_irqsave(&config->lock, flags);
val = readl(config->ioaddr + STATUS_REG);
val |= RTC_INT_MASK;
writel(val, config->ioaddr + STATUS_REG);
spin_unlock_irqrestore(&config->lock, flags);
}
static inline void spear_rtc_enable_interrupt(struct spear_rtc_config *config)
{
unsigned int val;
val = readl(config->ioaddr + CTRL_REG);
if (!(val & INT_ENABLE)) {
spear_rtc_clear_interrupt(config);
val |= INT_ENABLE;
writel(val, config->ioaddr + CTRL_REG);
}
}
static inline void spear_rtc_disable_interrupt(struct spear_rtc_config *config)
{
unsigned int val;
val = readl(config->ioaddr + CTRL_REG);
if (val & INT_ENABLE) {
val &= ~INT_ENABLE;
writel(val, config->ioaddr + CTRL_REG);
}
}
static inline int is_write_complete(struct spear_rtc_config *config)
{
int ret = 0;
unsigned long flags;
spin_lock_irqsave(&config->lock, flags);
if ((readl(config->ioaddr + STATUS_REG)) & STATUS_FAIL)
ret = -EIO;
spin_unlock_irqrestore(&config->lock, flags);
return ret;
}
static void rtc_wait_not_busy(struct spear_rtc_config *config)
{
int status, count = 0;
unsigned long flags;
/* Assuming BUSY may stay active for 80 msec) */
for (count = 0; count < 80; count++) {
spin_lock_irqsave(&config->lock, flags);
status = readl(config->ioaddr + STATUS_REG);
spin_unlock_irqrestore(&config->lock, flags);
if ((status & STATUS_BUSY) == 0)
break;
/* check status busy, after each msec */
msleep(1);
}
}
static irqreturn_t spear_rtc_irq(int irq, void *dev_id)
{
struct spear_rtc_config *config = dev_id;
unsigned long flags, events = 0;
unsigned int irq_data;
spin_lock_irqsave(&config->lock, flags);
irq_data = readl(config->ioaddr + STATUS_REG);
spin_unlock_irqrestore(&config->lock, flags);
if ((irq_data & RTC_INT_MASK)) {
spear_rtc_clear_interrupt(config);
events = RTC_IRQF | RTC_AF;
rtc_update_irq(config->rtc, 1, events);
return IRQ_HANDLED;
} else
return IRQ_NONE;
}
static int tm2bcd(struct rtc_time *tm)
{
if (rtc_valid_tm(tm) != 0)
return -EINVAL;
tm->tm_sec = bin2bcd(tm->tm_sec);
tm->tm_min = bin2bcd(tm->tm_min);
tm->tm_hour = bin2bcd(tm->tm_hour);
tm->tm_mday = bin2bcd(tm->tm_mday);
tm->tm_mon = bin2bcd(tm->tm_mon + 1);
tm->tm_year = bin2bcd(tm->tm_year);
return 0;
}
static void bcd2tm(struct rtc_time *tm)
{
tm->tm_sec = bcd2bin(tm->tm_sec);
tm->tm_min = bcd2bin(tm->tm_min);
tm->tm_hour = bcd2bin(tm->tm_hour);
tm->tm_mday = bcd2bin(tm->tm_mday);
tm->tm_mon = bcd2bin(tm->tm_mon) - 1;
/* epoch == 1900 */
tm->tm_year = bcd2bin(tm->tm_year);
}
/*
* spear_rtc_read_time - set the time
* @dev: rtc device in use
* @tm: holds date and time
*
* This function read time and date. On success it will return 0
* otherwise -ve error is returned.
*/
static int spear_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
struct spear_rtc_config *config = dev_get_drvdata(dev);
unsigned int time, date;
/* we don't report wday/yday/isdst ... */
rtc_wait_not_busy(config);
time = readl(config->ioaddr + TIME_REG);
date = readl(config->ioaddr + DATE_REG);
tm->tm_sec = (time >> SECOND_SHIFT) & SECOND_MASK;
tm->tm_min = (time >> MINUTE_SHIFT) & MIN_MASK;
tm->tm_hour = (time >> HOUR_SHIFT) & HOUR_MASK;
tm->tm_mday = (date >> MDAY_SHIFT) & DAY_MASK;
tm->tm_mon = (date >> MONTH_SHIFT) & MONTH_MASK;
tm->tm_year = (date >> YEAR_SHIFT) & YEAR_MASK;
bcd2tm(tm);
return 0;
}
/*
* spear_rtc_set_time - set the time
* @dev: rtc device in use
* @tm: holds date and time
*
* This function set time and date. On success it will return 0
* otherwise -ve error is returned.
*/
static int spear_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
struct spear_rtc_config *config = dev_get_drvdata(dev);
unsigned int time, date;
if (tm2bcd(tm) < 0)
return -EINVAL;
rtc_wait_not_busy(config);
time = (tm->tm_sec << SECOND_SHIFT) | (tm->tm_min << MINUTE_SHIFT) |
(tm->tm_hour << HOUR_SHIFT);
date = (tm->tm_mday << MDAY_SHIFT) | (tm->tm_mon << MONTH_SHIFT) |
(tm->tm_year << YEAR_SHIFT);
writel(time, config->ioaddr + TIME_REG);
writel(date, config->ioaddr + DATE_REG);
return is_write_complete(config);
}
/*
* spear_rtc_read_alarm - read the alarm time
* @dev: rtc device in use
* @alm: holds alarm date and time
*
* This function read alarm time and date. On success it will return 0
* otherwise -ve error is returned.
*/
static int spear_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
{
struct spear_rtc_config *config = dev_get_drvdata(dev);
unsigned int time, date;
rtc_wait_not_busy(config);
time = readl(config->ioaddr + ALARM_TIME_REG);
date = readl(config->ioaddr + ALARM_DATE_REG);
alm->time.tm_sec = (time >> SECOND_SHIFT) & SECOND_MASK;
alm->time.tm_min = (time >> MINUTE_SHIFT) & MIN_MASK;
alm->time.tm_hour = (time >> HOUR_SHIFT) & HOUR_MASK;
alm->time.tm_mday = (date >> MDAY_SHIFT) & DAY_MASK;
alm->time.tm_mon = (date >> MONTH_SHIFT) & MONTH_MASK;
alm->time.tm_year = (date >> YEAR_SHIFT) & YEAR_MASK;
bcd2tm(&alm->time);
alm->enabled = readl(config->ioaddr + CTRL_REG) & INT_ENABLE;
return 0;
}
/*
* spear_rtc_set_alarm - set the alarm time
* @dev: rtc device in use
* @alm: holds alarm date and time
*
* This function set alarm time and date. On success it will return 0
* otherwise -ve error is returned.
*/
static int spear_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
{
struct spear_rtc_config *config = dev_get_drvdata(dev);
unsigned int time, date;
int err;
if (tm2bcd(&alm->time) < 0)
return -EINVAL;
rtc_wait_not_busy(config);
time = (alm->time.tm_sec << SECOND_SHIFT) | (alm->time.tm_min <<
MINUTE_SHIFT) | (alm->time.tm_hour << HOUR_SHIFT);
date = (alm->time.tm_mday << MDAY_SHIFT) | (alm->time.tm_mon <<
MONTH_SHIFT) | (alm->time.tm_year << YEAR_SHIFT);
writel(time, config->ioaddr + ALARM_TIME_REG);
writel(date, config->ioaddr + ALARM_DATE_REG);
err = is_write_complete(config);
if (err < 0)
return err;
if (alm->enabled)
spear_rtc_enable_interrupt(config);
else
spear_rtc_disable_interrupt(config);
return 0;
}
static int spear_alarm_irq_enable(struct device *dev, unsigned int enabled)
{
struct spear_rtc_config *config = dev_get_drvdata(dev);
int ret = 0;
spear_rtc_clear_interrupt(config);
switch (enabled) {
case 0:
/* alarm off */
spear_rtc_disable_interrupt(config);
break;
case 1:
/* alarm on */
spear_rtc_enable_interrupt(config);
break;
default:
ret = -EINVAL;
break;
}
return ret;
}
static struct rtc_class_ops spear_rtc_ops = {
.read_time = spear_rtc_read_time,
.set_time = spear_rtc_set_time,
.read_alarm = spear_rtc_read_alarm,
.set_alarm = spear_rtc_set_alarm,
.alarm_irq_enable = spear_alarm_irq_enable,
};
static int __devinit spear_rtc_probe(struct platform_device *pdev)
{
struct resource *res;
struct spear_rtc_config *config;
int status = 0;
int irq;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "no resource defined\n");
return -EBUSY;
}
config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL);
if (!config) {
dev_err(&pdev->dev, "out of memory\n");
return -ENOMEM;
}
/* alarm irqs */
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(&pdev->dev, "no update irq?\n");
return irq;
}
status = devm_request_irq(&pdev->dev, irq, spear_rtc_irq, 0, pdev->name,
config);
if (status) {
dev_err(&pdev->dev, "Alarm interrupt IRQ%d already claimed\n",
irq);
return status;
}
config->ioaddr = devm_request_and_ioremap(&pdev->dev, res);
if (!config->ioaddr) {
dev_err(&pdev->dev, "request-ioremap fail\n");
return -ENOMEM;
}
config->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(config->clk))
return PTR_ERR(config->clk);
status = clk_prepare_enable(config->clk);
if (status < 0)
return status;
spin_lock_init(&config->lock);
platform_set_drvdata(pdev, config);
config->rtc = rtc_device_register(pdev->name, &pdev->dev,
&spear_rtc_ops, THIS_MODULE);
if (IS_ERR(config->rtc)) {
dev_err(&pdev->dev, "can't register RTC device, err %ld\n",
PTR_ERR(config->rtc));
status = PTR_ERR(config->rtc);
goto err_disable_clock;
}
config->rtc->uie_unsupported = 1;
if (!device_can_wakeup(&pdev->dev))
device_init_wakeup(&pdev->dev, 1);
return 0;
err_disable_clock:
platform_set_drvdata(pdev, NULL);
clk_disable_unprepare(config->clk);
return status;
}
static int __devexit spear_rtc_remove(struct platform_device *pdev)
{
struct spear_rtc_config *config = platform_get_drvdata(pdev);
rtc_device_unregister(config->rtc);
spear_rtc_disable_interrupt(config);
clk_disable_unprepare(config->clk);
device_init_wakeup(&pdev->dev, 0);
return 0;
}
#ifdef CONFIG_PM
static int spear_rtc_suspend(struct platform_device *pdev, pm_message_t state)
{
struct spear_rtc_config *config = platform_get_drvdata(pdev);
int irq;
irq = platform_get_irq(pdev, 0);
if (device_may_wakeup(&pdev->dev)) {
if (!enable_irq_wake(irq))
config->irq_wake = 1;
} else {
spear_rtc_disable_interrupt(config);
clk_disable(config->clk);
}
return 0;
}
static int spear_rtc_resume(struct platform_device *pdev)
{
struct spear_rtc_config *config = platform_get_drvdata(pdev);
int irq;
irq = platform_get_irq(pdev, 0);
if (device_may_wakeup(&pdev->dev)) {
if (config->irq_wake) {
disable_irq_wake(irq);
config->irq_wake = 0;
}
} else {
clk_enable(config->clk);
spear_rtc_enable_interrupt(config);
}
return 0;
}
#else
#define spear_rtc_suspend NULL
#define spear_rtc_resume NULL
#endif
static void spear_rtc_shutdown(struct platform_device *pdev)
{
struct spear_rtc_config *config = platform_get_drvdata(pdev);
spear_rtc_disable_interrupt(config);
clk_disable(config->clk);
}
#ifdef CONFIG_OF
static const struct of_device_id spear_rtc_id_table[] = {
{ .compatible = "st,spear600-rtc" },
{}
};
MODULE_DEVICE_TABLE(of, spear_rtc_id_table);
#endif
static struct platform_driver spear_rtc_driver = {
.probe = spear_rtc_probe,
.remove = __devexit_p(spear_rtc_remove),
.suspend = spear_rtc_suspend,
.resume = spear_rtc_resume,
.shutdown = spear_rtc_shutdown,
.driver = {
.name = "rtc-spear",
.of_match_table = of_match_ptr(spear_rtc_id_table),
},
};
module_platform_driver(spear_rtc_driver);
MODULE_ALIAS("platform:rtc-spear");
MODULE_AUTHOR("Rajeev Kumar <rajeev-dlh.kumar@st.com>");
MODULE_DESCRIPTION("ST SPEAr Realtime Clock Driver (RTC)");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink