| .. |
|
accel
|
iio:kfifo_buf header include push down.
|
2017-01-10 19:54:53 +00:00 |
|
adc
|
iio: adc: max1363: Export OF device ID table as module aliases
|
2017-01-22 13:21:30 +00:00 |
|
amplifiers
|
|
|
|
buffer
|
iio:buffer.h - split into buffer.h and buffer_impl.h
|
2017-01-10 19:54:55 +00:00 |
|
chemical
|
iio:chemical:atlas-ph-sensor: Fix use of 32 bit int to hold 16 bit big endian value
|
2016-10-23 22:18:27 +01:00 |
|
common
|
iio:kfifo_buf header include push down.
|
2017-01-10 19:54:53 +00:00 |
|
counter
|
iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8
|
2016-10-01 17:06:21 +01:00 |
|
dac
|
iio: dac: ad5593r: Add ACPI support
|
2016-12-30 17:20:14 +00:00 |
|
dummy
|
iio:dummy: Stop enabling timestamp by default.
|
2017-01-10 19:54:55 +00:00 |
|
frequency
|
|
|
|
gyro
|
iio:kfifo_buf header include push down.
|
2017-01-10 19:54:53 +00:00 |
|
health
|
iio: health: max30100: use msleep() for long uncritical delays
|
2017-01-22 13:21:28 +00:00 |
|
humidity
|
iio: humidity: Support acpi probe for hts211
|
2016-12-03 08:56:28 +00:00 |
|
imu
|
iio: imu: st_lsm6dsx: fix typo in gyro sensitivity definition
|
2017-01-22 13:21:41 +00:00 |
|
light
|
iio: light: opt3001: Export OF device ID table as module aliases
|
2017-01-22 13:21:29 +00:00 |
|
magnetometer
|
iio: magnetometer: mag3110: claim direct mode during raw writes
|
2017-01-21 12:20:40 +00:00 |
|
orientation
|
iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver)
|
2016-11-05 17:47:47 +00:00 |
|
potentiometer
|
iio: potentiometer: mcp4531: Export OF device ID table as module aliases
|
2017-01-22 13:21:29 +00:00 |
|
potentiostat
|
iio: potentiostat: add LMP91000 support
|
2016-09-27 20:33:03 +01:00 |
|
pressure
|
iio: pressure: ms5611: claim direct mode during oversampling changes
|
2017-01-21 12:31:05 +00:00 |
|
proximity
|
iio: proximity: sx9500: claim direct mode during raw proximity reads
|
2017-01-21 12:21:53 +00:00 |
|
temperature
|
iio:temperature: Add support for TI TMP007 sensor
|
2017-01-14 10:45:05 +00:00 |
|
trigger
|
iio:trigger: Experimental kthread tight loop trigger (thread only)
|
2016-06-03 13:18:44 +01:00 |
|
iio_core_trigger.h
|
|
|
|
iio_core.h
|
iio:core: timestamping clock selection support
|
2016-06-30 19:41:38 +01:00 |
|
industrialio-buffer.c
|
iio:buffer.h - split into buffer.h and buffer_impl.h
|
2017-01-10 19:54:55 +00:00 |
|
industrialio-configfs.c
|
|
|
|
industrialio-core.c
|
iio:buffer.h - split into buffer.h and buffer_impl.h
|
2017-01-10 19:54:55 +00:00 |
|
industrialio-event.c
|
iio: iio_push_event(): Don't crash if the event interface is not registered
|
2016-09-10 16:40:44 +01:00 |
|
industrialio-sw-device.c
|
|
|
|
industrialio-sw-trigger.c
|
|
|
|
industrialio-trigger.c
|
iio:trigger: Add helper function to verify that a trigger belongs to the same device
|
2016-09-27 20:32:55 +01:00 |
|
industrialio-triggered-event.c
|
|
|
|
inkern.c
|
iio: inkern: pass through raw values if no scaling
|
2017-01-14 12:20:18 +00:00 |
|
Kconfig
|
iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8
|
2016-10-01 17:06:21 +01:00 |
|
Makefile
|
iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8
|
2016-10-01 17:06:21 +01:00 |
dfebd8d81d