Philipp Zabel e03e0590b2 [ARM] 5020/1: magician: remove __devinit marker from pasic3_leds_info ...

Platform data must not be marked with __devinit. Even __devinitdata
would be wrong as the platform driver can be compiled as a module.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

2008-04-24 21:55:59 +01:00

..

akita-ioexp.c

i2c: normal_i2c can be made const (remaining drivers)

2008-01-27 18:14:47 +01:00

clock.c

[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

2008-04-19 11:29:04 +01:00

clock.h

[ARM] pxa: introduce clk support for PXA SoC clocks

2007-10-12 21:14:55 +01:00

cm-x270-pci.c

[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

2008-04-19 11:29:04 +01:00

cm-x270-pci.h

[ARM] 4576/1: CM-X270 machine support

2007-10-15 18:53:57 +01:00

cm-x270.c

[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

2008-04-19 11:29:04 +01:00

colibri.c

[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

2008-04-19 11:29:04 +01:00

corgi_lcd.c

[ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix

2008-01-28 13:13:25 +00:00

corgi_pm.c

[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

2008-04-19 11:29:04 +01:00

corgi_ssp.c

[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

2008-04-19 11:29:04 +01:00

corgi.c

[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

2008-04-19 11:29:04 +01:00

cpu-pxa.c

[ARM] eliminate MODULE_PARM() usage

2008-02-29 22:47:17 +00:00

devices.c

[ARM] pxa: V4L2 soc_camera driver for PXA270

2008-04-19 17:14:30 +01:00

devices.h

[ARM] pxa: add pxa27x_keypad device and pxa_set_keypad_info()

2008-04-19 11:29:05 +01:00

dma.c

[ARM] replace remaining __FUNCTION__ occurrences

2008-03-06 12:18:18 +00:00

em-x270.c

[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

2008-04-19 11:29:04 +01:00

eseries.c

[ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs.

2008-01-28 13:13:13 +00:00

generic.c

[ARM] pxa: move GPIO sysdev outside of generic.c into gpio.c

2008-04-19 11:29:04 +01:00

generic.h

[ARM] pxa: move ARRAY_AND_SIZE definition to generic.h

2008-04-19 11:29:04 +01:00

gpio.c

[ARM] 5003/1: Shut up sparse warnings

2008-04-19 11:29:09 +01:00

gumstix.c

[ARM] 5006/1: Gumstix GPIO header fixup and defconfig fixup

2008-04-21 12:47:46 +01:00

idp.c

[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

2008-04-19 11:29:04 +01:00

irq.c

[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

2008-04-19 11:29:04 +01:00

Kconfig

[ARM] 4867/1: Adds flash, udc, mci support for gumstix F boards

2008-04-19 11:29:06 +01:00

leds-idp.c

…

leds-lubbock.c

…

leds-mainstone.c

…

leds-trizeps4.c

[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

2008-04-19 11:29:04 +01:00

leds.c

…

leds.h

…

littleton.c

[ARM] pxa: add keypad support for littleton

2008-04-19 11:29:06 +01:00

lpd270.c

[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

2008-04-19 11:29:04 +01:00

lubbock.c

[ARM] pxa: lubbock: move mis-placed SPI info

2008-04-19 11:29:08 +01:00

magician.c

[ARM] 5020/1: magician: remove __devinit marker from pasic3_leds_info

2008-04-24 21:55:59 +01:00

mainstone.c

[ARM] 4901/3: mainstone: Register primary I2C bus

2008-04-19 11:29:06 +01:00

Makefile

[ARM] 4867/1: Adds flash, udc, mci support for gumstix F boards

2008-04-19 11:29:06 +01:00

Makefile.boot

…

mfp-pxa2xx.c

[ARM] pxa: allow dynamic enable/disable of GPIO wakeup for pxa{25x,27x}

2008-04-19 11:29:05 +01:00

mfp-pxa3xx.c

[ARM] pxa: move mfp sysdev registeration out for suspend/resume order

2008-04-19 11:29:04 +01:00

pcm027.c

[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

2008-04-19 11:29:04 +01:00

pcm990-baseboard.c

[ARM] pxa: Phycore pcm-990-specific code for the PXA270 Quick Capture driver

2008-04-19 17:14:30 +01:00

pm.c

[ARM] 5014/1: Cleanup reset state before entering suspend or resetting.

2008-04-24 14:34:26 +01:00

poodle.c

[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

2008-04-19 11:29:04 +01:00

pxa3xx.c

[ARM] pxa: initialise PXA devices before platform init code

2008-04-19 11:29:09 +01:00

pxa25x.c

[ARM] pxa: initialise PXA devices before platform init code

2008-04-19 11:29:09 +01:00

pxa27x.c

[ARM] pxa: initialise PXA devices before platform init code

2008-04-19 11:29:09 +01:00

pxa300.c

[ARM] 4635/1: pxa: Change Eric Miao's email address to eric.miao@marvell.com

2007-10-31 15:21:48 +00:00

pxa320.c

[ARM] 4675/1: pxa: fix mfp address definition error for pxa320

2007-11-29 20:52:54 +00:00

sharpsl_pm.c

[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

2008-04-19 11:29:04 +01:00

sharpsl.h

[ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix

2008-01-28 13:13:25 +00:00

sleep.S

[ARM] pxa: add preliminary suspend/resume code for pxa3xx

2008-02-04 13:17:33 +00:00

smemc.c

[ARM] pxa: introduce sysdev for pxa3xx static memory controller

2008-02-04 13:17:33 +00:00

spitz_pm.c

[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

2008-04-19 11:29:04 +01:00

spitz.c

[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

2008-04-19 11:29:04 +01:00

ssp.c

Merge branch 'pxa-plat' into devel

2008-01-28 13:21:38 +00:00

standby.S

[ARM] pxa: Add PXA3 standby code hooked into the IRQ wake scheme

2008-01-26 15:07:56 +00:00

time.c

[ARM] pxa: fix PXA27x resume

2008-01-26 15:07:57 +00:00

tosa.c

[ARM] 5002/1: tosa: add two more leds

2008-04-19 11:29:09 +01:00

trizeps4.c

[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h

2008-04-19 11:29:04 +01:00

zylonite_pxa300.c

[ARM] 4976/1: zylonite: Configure GPIO for WM9713 IRQ line

2008-04-19 11:29:09 +01:00

zylonite_pxa320.c

[ARM] 4976/1: zylonite: Configure GPIO for WM9713 IRQ line

2008-04-19 11:29:09 +01:00

zylonite.c

[ARM] 4976/1: zylonite: Configure GPIO for WM9713 IRQ line

2008-04-19 11:29:09 +01:00