linux/include/asm-i386/mach-default/mach_reboot.h
Truxton Fulton 59f4e7d572 [PATCH] fix reboot via keyboard controller reset
I have a system (Biostar IDEQ210M mini-pc with a VIA chipset) which will
not reboot unless a keyboard is plugged in to it.  I have tried all
combinations of the kernel "reboot=x,y" flags to no avail.  Rebooting by
any method will leave the system in a wedged state (at the "Restarting
system" message).

I finally tracked the problem down to the machine's refusal to fully reboot
unless the keyboard controller status register had bit 2 set.  This is the
"System flag" which when set, indicates successful completion of the
keyboard controller self-test (Basic Assurance Test, BAT).

I suppose that something is trying to protect against sporadic reboots
unless the keyboard controller is in a good state (a keyboard is present),
but I need this machine to be headless.

I found that setting the system flag (via the command byte) before giving
the "pulse reset line" command will allow the reboot to proceed.  The patch
is simple, and I think it should be fine for everybody whether they have
this type of machine or not.  This affects the "hard" reboot (as done when
the kernel boot flags "reboot=c,h" are used).

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:35 -07:00

39 lines
711 B
C

/*
* arch/i386/mach-generic/mach_reboot.h
*
* Machine specific reboot functions for generic.
* Split out from reboot.c by Osamu Tomita <tomita@cinet.co.jp>
*/
#ifndef _MACH_REBOOT_H
#define _MACH_REBOOT_H
static inline void kb_wait(void)
{
int i;
for (i = 0; i < 0x10000; i++)
if ((inb_p(0x64) & 0x02) == 0)
break;
}
static inline void mach_reboot(void)
{
int i;
for (i = 0; i < 100; i++) {
kb_wait();
udelay(50);
outb(0x60, 0x64); /* write Controller Command Byte */
udelay(50);
kb_wait();
udelay(50);
outb(0x14, 0x60); /* set "System flag" */
udelay(50);
kb_wait();
udelay(50);
outb(0xfe, 0x64); /* pulse reset low */
udelay(50);
}
}
#endif /* !_MACH_REBOOT_H */