linux/arch/arm/mach-pxa
Philipp Zabel e07ff8d809 [ARM] 4952/1: magician: add LCD detection, LCD power switching, update pxafb settings
All magician devices I've encountered so far have featured the Toppoly
TD028STEB1 display, so the Samsung LTP280QV support is untested.
The power-on sequence is not correct because pxafb doesn't yet support
enabling the LCD controller in the middle of the it.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19 11:29:07 +01:00
..
akita-ioexp.c i2c: normal_i2c can be made const (remaining drivers) 2008-01-27 18:14:47 +01:00
clock.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
clock.h [ARM] pxa: introduce clk support for PXA SoC clocks 2007-10-12 21:14:55 +01:00
cm-x270-pci.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
cm-x270-pci.h [ARM] 4576/1: CM-X270 machine support 2007-10-15 18:53:57 +01:00
cm-x270.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
colibri.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
corgi_lcd.c [ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix 2008-01-28 13:13:25 +00:00
corgi_pm.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
corgi_ssp.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
corgi.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
cpu-pxa.c [ARM] eliminate MODULE_PARM() usage 2008-02-29 22:47:17 +00:00
devices.c [ARM] pxa: add pxa27x_keypad device and pxa_set_keypad_info() 2008-04-19 11:29:05 +01:00
devices.h [ARM] pxa: add pxa27x_keypad device and pxa_set_keypad_info() 2008-04-19 11:29:05 +01:00
dma.c [ARM] replace remaining __FUNCTION__ occurrences 2008-03-06 12:18:18 +00:00
em-x270.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
eseries.c [ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs. 2008-01-28 13:13:13 +00:00
generic.c [ARM] pxa: move GPIO sysdev outside of generic.c into gpio.c 2008-04-19 11:29:04 +01:00
generic.h [ARM] pxa: move ARRAY_AND_SIZE definition to generic.h 2008-04-19 11:29:04 +01:00
gpio.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
gumstix.c [ARM] 4867/1: Adds flash, udc, mci support for gumstix F boards 2008-04-19 11:29:06 +01:00
idp.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
irq.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
Kconfig [ARM] 4867/1: Adds flash, udc, mci support for gumstix F boards 2008-04-19 11:29:06 +01:00
leds-idp.c
leds-lubbock.c
leds-mainstone.c
leds-trizeps4.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
leds.c
leds.h
littleton.c [ARM] pxa: add keypad support for littleton 2008-04-19 11:29:06 +01:00
lpd270.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
lubbock.c [ARM] pxa: use new pin configuration mechanism for lubbock 2008-04-19 11:29:05 +01:00
magician.c [ARM] 4952/1: magician: add LCD detection, LCD power switching, update pxafb settings 2008-04-19 11:29:07 +01:00
mainstone.c [ARM] 4901/3: mainstone: Register primary I2C bus 2008-04-19 11:29:06 +01:00
Makefile [ARM] 4867/1: Adds flash, udc, mci support for gumstix F boards 2008-04-19 11:29:06 +01:00
Makefile.boot
mfp-pxa2xx.c [ARM] pxa: allow dynamic enable/disable of GPIO wakeup for pxa{25x,27x} 2008-04-19 11:29:05 +01:00
mfp-pxa3xx.c [ARM] pxa: move mfp sysdev registeration out for suspend/resume order 2008-04-19 11:29:04 +01:00
pcm027.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
pcm990-baseboard.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
pm.c [ARM] pxa: skip registers saving/restoring if entering standby mode 2008-01-26 15:07:57 +00:00
poodle.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
pxa3xx.c [ARM] 4946/1: pxa3xx: Print an error if we refuse to suspend 2008-04-19 11:29:06 +01:00
pxa25x.c [ARM] pxa: allow dynamic enable/disable of GPIO wakeup for pxa{25x,27x} 2008-04-19 11:29:05 +01:00
pxa27x.c [ARM] pxa: add pxa27x_keypad device and pxa_set_keypad_info() 2008-04-19 11:29:05 +01:00
pxa300.c [ARM] 4635/1: pxa: Change Eric Miao's email address to eric.miao@marvell.com 2007-10-31 15:21:48 +00:00
pxa320.c [ARM] 4675/1: pxa: fix mfp address definition error for pxa320 2007-11-29 20:52:54 +00:00
sharpsl_pm.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
sharpsl.h [ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix 2008-01-28 13:13:25 +00:00
sleep.S [ARM] pxa: add preliminary suspend/resume code for pxa3xx 2008-02-04 13:17:33 +00:00
smemc.c [ARM] pxa: introduce sysdev for pxa3xx static memory controller 2008-02-04 13:17:33 +00:00
spitz_pm.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
spitz.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
ssp.c Merge branch 'pxa-plat' into devel 2008-01-28 13:21:38 +00:00
standby.S [ARM] pxa: Add PXA3 standby code hooked into the IRQ wake scheme 2008-01-26 15:07:56 +00:00
time.c [ARM] pxa: fix PXA27x resume 2008-01-26 15:07:57 +00:00
tosa.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
trizeps4.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
zylonite_pxa300.c [ARM] pxa: move ARRAY_AND_SIZE definition to generic.h 2008-04-19 11:29:04 +01:00
zylonite_pxa320.c [ARM] pxa: move ARRAY_AND_SIZE definition to generic.h 2008-04-19 11:29:04 +01:00
zylonite.c [ARM] pxa: add keypad support for zylonite 2008-04-19 11:29:05 +01:00