mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-25 19:07:46 +00:00
ca14ab55fb
This change adds a support for a 14nm qcom-ufs phy that is required in platforms that use ufs-qcom controller. Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Reviewed-by: Dov Levenglick <dovl@codeaurora.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
178 lines
8.2 KiB
C
178 lines
8.2 KiB
C
/*
|
|
* Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*/
|
|
|
|
#ifndef UFS_QCOM_PHY_QMP_14NM_H_
|
|
#define UFS_QCOM_PHY_QMP_14NM_H_
|
|
|
|
#include "phy-qcom-ufs-i.h"
|
|
|
|
/* QCOM UFS PHY control registers */
|
|
#define COM_OFF(x) (0x000 + x)
|
|
#define PHY_OFF(x) (0xC00 + x)
|
|
#define TX_OFF(n, x) (0x400 + (0x400 * n) + x)
|
|
#define RX_OFF(n, x) (0x600 + (0x400 * n) + x)
|
|
|
|
/* UFS PHY QSERDES COM registers */
|
|
#define QSERDES_COM_BG_TIMER COM_OFF(0x0C)
|
|
#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN COM_OFF(0x34)
|
|
#define QSERDES_COM_SYS_CLK_CTRL COM_OFF(0x3C)
|
|
#define QSERDES_COM_LOCK_CMP1_MODE0 COM_OFF(0x4C)
|
|
#define QSERDES_COM_LOCK_CMP2_MODE0 COM_OFF(0x50)
|
|
#define QSERDES_COM_LOCK_CMP3_MODE0 COM_OFF(0x54)
|
|
#define QSERDES_COM_LOCK_CMP1_MODE1 COM_OFF(0x58)
|
|
#define QSERDES_COM_LOCK_CMP2_MODE1 COM_OFF(0x5C)
|
|
#define QSERDES_COM_LOCK_CMP3_MODE1 COM_OFF(0x60)
|
|
#define QSERDES_COM_CP_CTRL_MODE0 COM_OFF(0x78)
|
|
#define QSERDES_COM_CP_CTRL_MODE1 COM_OFF(0x7C)
|
|
#define QSERDES_COM_PLL_RCTRL_MODE0 COM_OFF(0x84)
|
|
#define QSERDES_COM_PLL_RCTRL_MODE1 COM_OFF(0x88)
|
|
#define QSERDES_COM_PLL_CCTRL_MODE0 COM_OFF(0x90)
|
|
#define QSERDES_COM_PLL_CCTRL_MODE1 COM_OFF(0x94)
|
|
#define QSERDES_COM_SYSCLK_EN_SEL COM_OFF(0xAC)
|
|
#define QSERDES_COM_RESETSM_CNTRL COM_OFF(0xB4)
|
|
#define QSERDES_COM_LOCK_CMP_EN COM_OFF(0xC8)
|
|
#define QSERDES_COM_LOCK_CMP_CFG COM_OFF(0xCC)
|
|
#define QSERDES_COM_DEC_START_MODE0 COM_OFF(0xD0)
|
|
#define QSERDES_COM_DEC_START_MODE1 COM_OFF(0xD4)
|
|
#define QSERDES_COM_DIV_FRAC_START1_MODE0 COM_OFF(0xDC)
|
|
#define QSERDES_COM_DIV_FRAC_START2_MODE0 COM_OFF(0xE0)
|
|
#define QSERDES_COM_DIV_FRAC_START3_MODE0 COM_OFF(0xE4)
|
|
#define QSERDES_COM_DIV_FRAC_START1_MODE1 COM_OFF(0xE8)
|
|
#define QSERDES_COM_DIV_FRAC_START2_MODE1 COM_OFF(0xEC)
|
|
#define QSERDES_COM_DIV_FRAC_START3_MODE1 COM_OFF(0xF0)
|
|
#define QSERDES_COM_INTEGLOOP_GAIN0_MODE0 COM_OFF(0x108)
|
|
#define QSERDES_COM_INTEGLOOP_GAIN1_MODE0 COM_OFF(0x10C)
|
|
#define QSERDES_COM_INTEGLOOP_GAIN0_MODE1 COM_OFF(0x110)
|
|
#define QSERDES_COM_INTEGLOOP_GAIN1_MODE1 COM_OFF(0x114)
|
|
#define QSERDES_COM_VCO_TUNE_CTRL COM_OFF(0x124)
|
|
#define QSERDES_COM_VCO_TUNE_MAP COM_OFF(0x128)
|
|
#define QSERDES_COM_VCO_TUNE1_MODE0 COM_OFF(0x12C)
|
|
#define QSERDES_COM_VCO_TUNE2_MODE0 COM_OFF(0x130)
|
|
#define QSERDES_COM_VCO_TUNE1_MODE1 COM_OFF(0x134)
|
|
#define QSERDES_COM_VCO_TUNE2_MODE1 COM_OFF(0x138)
|
|
#define QSERDES_COM_VCO_TUNE_TIMER1 COM_OFF(0x144)
|
|
#define QSERDES_COM_VCO_TUNE_TIMER2 COM_OFF(0x148)
|
|
#define QSERDES_COM_CLK_SELECT COM_OFF(0x174)
|
|
#define QSERDES_COM_HSCLK_SEL COM_OFF(0x178)
|
|
#define QSERDES_COM_CORECLK_DIV COM_OFF(0x184)
|
|
#define QSERDES_COM_CORE_CLK_EN COM_OFF(0x18C)
|
|
#define QSERDES_COM_CMN_CONFIG COM_OFF(0x194)
|
|
#define QSERDES_COM_SVS_MODE_CLK_SEL COM_OFF(0x19C)
|
|
#define QSERDES_COM_CORECLK_DIV_MODE1 COM_OFF(0x1BC)
|
|
|
|
/* UFS PHY registers */
|
|
#define UFS_PHY_PHY_START PHY_OFF(0x00)
|
|
#define UFS_PHY_POWER_DOWN_CONTROL PHY_OFF(0x04)
|
|
#define UFS_PHY_PCS_READY_STATUS PHY_OFF(0x168)
|
|
|
|
/* UFS PHY TX registers */
|
|
#define QSERDES_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN TX_OFF(0, 0x68)
|
|
#define QSERDES_TX_LANE_MODE TX_OFF(0, 0x94)
|
|
|
|
/* UFS PHY RX registers */
|
|
#define QSERDES_RX_UCDR_FASTLOCK_FO_GAIN RX_OFF(0, 0x40)
|
|
#define QSERDES_RX_RX_TERM_BW RX_OFF(0, 0x90)
|
|
#define QSERDES_RX_RX_EQ_GAIN1_LSB RX_OFF(0, 0xC4)
|
|
#define QSERDES_RX_RX_EQ_GAIN1_MSB RX_OFF(0, 0xC8)
|
|
#define QSERDES_RX_RX_EQ_GAIN2_LSB RX_OFF(0, 0xCC)
|
|
#define QSERDES_RX_RX_EQ_GAIN2_MSB RX_OFF(0, 0xD0)
|
|
#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2 RX_OFF(0, 0xD8)
|
|
#define QSERDES_RX_SIGDET_CNTRL RX_OFF(0, 0x114)
|
|
#define QSERDES_RX_SIGDET_LVL RX_OFF(0, 0x118)
|
|
#define QSERDES_RX_SIGDET_DEGLITCH_CNTRL RX_OFF(0, 0x11C)
|
|
#define QSERDES_RX_RX_INTERFACE_MODE RX_OFF(0, 0x12C)
|
|
|
|
/*
|
|
* This structure represents the 14nm specific phy.
|
|
* common_cfg MUST remain the first field in this structure
|
|
* in case extra fields are added. This way, when calling
|
|
* get_ufs_qcom_phy() of generic phy, we can extract the
|
|
* common phy structure (struct ufs_qcom_phy) out of it
|
|
* regardless of the relevant specific phy.
|
|
*/
|
|
struct ufs_qcom_phy_qmp_14nm {
|
|
struct ufs_qcom_phy common_cfg;
|
|
};
|
|
|
|
static struct ufs_qcom_phy_calibration phy_cal_table_rate_A[] = {
|
|
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CMN_CONFIG, 0x0e),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL, 0xd7),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CLK_SELECT, 0x30),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYS_CLK_CTRL, 0x06),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BG_TIMER, 0x0a),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_HSCLK_SEL, 0x05),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORECLK_DIV, 0x0a),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_EN, 0x01),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_CTRL, 0x10),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x20),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORE_CLK_EN, 0x00),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_CFG, 0x00),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x14),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE0, 0x82),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE1_MODE0, 0x28),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE2_MODE0, 0x02),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE0, 0xff),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE1, 0x98),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE1, 0x0b),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE1, 0x16),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE1, 0x28),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE2_MODE1, 0x00),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE1, 0x32),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP3_MODE1, 0x00),
|
|
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN, 0x45),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE, 0x02),
|
|
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_LVL, 0x24),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_CNTRL, 0x02),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_INTERFACE_MODE, 0x00),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x18),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_TERM_BW, 0x5B),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xFF),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3F),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xFF),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x0F),
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0E),
|
|
};
|
|
|
|
static struct ufs_qcom_phy_calibration phy_cal_table_rate_B[] = {
|
|
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x54),
|
|
};
|
|
|
|
#endif
|