linux/drivers/serial
Scott Wood 15f8c604a7 [POWERPC] cpm: Describe multi-user ram in its own device node.
The way the current CPM binding describes available multi-user (a.k.a.
dual-ported) RAM doesn't work well when there are multiple free regions,
and it doesn't work at all if the region doesn't begin at the start of
the muram area (as the hardware needs to be programmed with offsets into
this area).  The latter situation can happen with SMC UARTs on CPM2, as its
parameter RAM is relocatable, u-boot puts it at zero, and the kernel doesn't
support moving it.

It is now described with a muram node, similar to QE.  The current CPM
binding is sufficiently recent (i.e. never appeared in an official release)
that compatibility with existing device trees is not an issue.

The code supporting the new binding is shared between cpm1 and cpm2, rather
than remain separated.  QE should be able to use this code as well, once
minor fixes are made to its device trees.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-04 15:47:05 -05:00
..
cpm_uart [POWERPC] cpm: Describe multi-user ram in its own device node. 2007-10-04 15:47:05 -05:00
jsm
8250_accent.c
8250_acorn.c
8250_au1x00.c
8250_boca.c
8250_early.c serial: fix 8250 early console setup 2007-08-03 15:02:56 -07:00
8250_exar_st16c554.c
8250_fourport.c
8250_gsc.c
8250_hp300.c serial: add early_serial_setup() back to header file 2007-07-18 08:38:22 -07:00
8250_hub6.c
8250_mca.c
8250_pci.c Fix modpost warning in serial driver 2007-08-31 01:42:23 -07:00
8250_pnp.c
8250.c Serial 8250: handle saving the clear-on-read bits from the LSR and MSR 2007-08-22 19:52:44 -07:00
8250.h
21285.c
68328serial.c m68knommu: fix workqueues in 68328 serial driver 2007-07-25 11:05:01 -07:00
68328serial.h
68360serial.c
amba-pl010.c
amba-pl011.c some kmalloc/memset ->kzalloc (tree wide) 2007-07-19 10:04:50 -07:00
atmel_serial.c
atmel_serial.h
bfin_5xx.c
clps711x.c
crisv10.c
dz.c
dz.h
icom.c
icom.h
imx.c [ARM] 4481/1: Fix a bug when i.MX is compiled as a module 2007-07-20 09:55:14 +01:00
ioc3_serial.c
ioc4_serial.c
ip22zilog.c
ip22zilog.h
Kconfig [POWERPC] Optionally use new device number for pmac_zilog 2007-09-22 14:49:21 +10:00
m32r_sio_reg.h
m32r_sio.c
m32r_sio.h
Makefile zs: move to the serial subsystem 2007-07-18 08:38:22 -07:00
mcfserial.c
mcfserial.h
mpc52xx_uart.c [POWERPC] 52xx: Fix mpc52xx_uart_of_assign to use correct index 2007-09-14 08:54:05 -05:00
mpsc.c serial: MPSC: Fix coding style and whitespace issues 2007-07-31 15:39:41 -07:00
mux.c
netx-serial.c
of_serial.c
pmac_zilog.c [POWERPC] Optionally use new device number for pmac_zilog 2007-09-22 14:49:21 +10:00
pmac_zilog.h
pnx8xxx_uart.c
pxa.c
s3c2410.c [ARM] 4508/1: S3C: Move items to include/asm-arm/plat-s3c 2007-07-22 16:44:24 +01:00
sa1100.c
sb1250-duart.c BCM1480 serial build fix 2007-09-11 17:21:19 -07:00
serial_core.c serial: don't optimise away baud rate changes when BOTHER is used 2007-08-22 19:52:44 -07:00
serial_cs.c
serial_ks8695.c
serial_lh7a40x.c
serial_txx9.c serial_txx9: Fix modem control line handling 2007-08-22 19:52:44 -07:00
sh-sci.c sh: remove support for sh7300 and solution engine 7300 2007-07-26 15:37:57 +09:00
sh-sci.h sh: remove support for sh7300 and solution engine 7300 2007-07-26 15:37:57 +09:00
sn_console.c sn_console section mismatch warning 2007-07-16 09:05:53 -07:00
suncore.c [SPARC]: Fix serial console device detection. 2007-07-20 16:59:26 -07:00
suncore.h [SPARC]: Fix serial console device detection. 2007-07-20 16:59:26 -07:00
sunhv.c [SPARC]: Fix serial console device detection. 2007-07-20 16:59:26 -07:00
sunsab.c [SUNSAB]: Fix broken SYSRQ. 2007-09-25 22:49:37 -07:00
sunsab.h
sunsu.c [SERIAL]: Fix 32-bit warnings in sunzilog.c and sunsu.c 2007-08-26 18:49:11 -07:00
sunzilog.c [SERIAL]: Fix 32-bit warnings in sunzilog.c and sunsu.c 2007-08-26 18:49:11 -07:00
sunzilog.h
uartlite.c [POWERPC] Uartlite: Revert register io access changes 2007-10-03 07:37:41 -05:00
v850e_uart.c
vr41xx_siu.c serial: fix vr41xx_siu serial console support 2007-07-31 15:39:41 -07:00
zs.c zs: move to the serial subsystem 2007-07-18 08:38:22 -07:00
zs.h zs: move to the serial subsystem 2007-07-18 08:38:22 -07:00