FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2024-12-26 03:17:48 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
e46834cd2d
linux/drivers/scsi/sata_sil24.c
Tejun Heo 8645984c35 [PATCH] sata_sil24: lengthen softreset timeout 
sil24 softreset timeout was > 100ms (100 loops with msleep(1)), which
turned out to be too short for some devices (ASI ARAID99 2000).  This
patch converts sil24 softreset waiting loop to use proper timeout
condition and lengthen the timeout to ATA_TMOUT_BOOT secs and check
interval to 100ms.  Chisato Yamauchi discovered the problem and
supplied initial patch.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Chisato Yamauchi <cyamauch@plamo.linet.gr.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-11 19:29:42 -05:00

1043 lines
28 KiB
C
Raw Blame History

/*
* sata_sil24.c - Driver for Silicon Image 3124/3132 SATA-2 controllers
*
* Copyright 2005 Tejun Heo
*
* Based on preview driver from Silicon Image.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any
* later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_cmnd.h>
#include <linux/libata.h>
#include <asm/io.h>
#define DRV_NAME "sata_sil24"
#define DRV_VERSION "0.23"
/*
* Port request block (PRB) 32 bytes
*/
struct sil24_prb {
u16 ctrl;
u16 prot;
u32 rx_cnt;
u8 fis[6 * 4];
};
/*
* Scatter gather entry (SGE) 16 bytes
*/
struct sil24_sge {
u64 addr;
u32 cnt;
u32 flags;
};
/*
* Port multiplier
*/
struct sil24_port_multiplier {
u32 diag;
u32 sactive;
};
enum {
/*
* Global controller registers (128 bytes @ BAR0)
*/
/* 32 bit regs */
HOST_SLOT_STAT = 0x00, /* 32 bit slot stat * 4 */
HOST_CTRL = 0x40,
HOST_IRQ_STAT = 0x44,
HOST_PHY_CFG = 0x48,
HOST_BIST_CTRL = 0x50,
HOST_BIST_PTRN = 0x54,
HOST_BIST_STAT = 0x58,
HOST_MEM_BIST_STAT = 0x5c,
HOST_FLASH_CMD = 0x70,
/* 8 bit regs */
HOST_FLASH_DATA = 0x74,
HOST_TRANSITION_DETECT = 0x75,
HOST_GPIO_CTRL = 0x76,
HOST_I2C_ADDR = 0x78, /* 32 bit */
HOST_I2C_DATA = 0x7c,
HOST_I2C_XFER_CNT = 0x7e,
HOST_I2C_CTRL = 0x7f,
/* HOST_SLOT_STAT bits */
HOST_SSTAT_ATTN = (1 << 31),
/*
* Port registers
* (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2)
*/
PORT_REGS_SIZE = 0x2000,
PORT_PRB = 0x0000, /* (32 bytes PRB + 16 bytes SGEs * 6) * 31 (3968 bytes) */
PORT_PM = 0x0f80, /* 8 bytes PM * 16 (128 bytes) */
/* 32 bit regs */
PORT_CTRL_STAT = 0x1000, /* write: ctrl-set, read: stat */
PORT_CTRL_CLR = 0x1004, /* write: ctrl-clear */
PORT_IRQ_STAT = 0x1008, /* high: status, low: interrupt */
PORT_IRQ_ENABLE_SET = 0x1010, /* write: enable-set */
PORT_IRQ_ENABLE_CLR = 0x1014, /* write: enable-clear */
PORT_ACTIVATE_UPPER_ADDR= 0x101c,
PORT_EXEC_FIFO = 0x1020, /* command execution fifo */
PORT_CMD_ERR = 0x1024, /* command error number */
PORT_FIS_CFG = 0x1028,
PORT_FIFO_THRES = 0x102c,
/* 16 bit regs */
PORT_DECODE_ERR_CNT = 0x1040,
PORT_DECODE_ERR_THRESH = 0x1042,
PORT_CRC_ERR_CNT = 0x1044,
PORT_CRC_ERR_THRESH = 0x1046,
PORT_HSHK_ERR_CNT = 0x1048,
PORT_HSHK_ERR_THRESH = 0x104a,
/* 32 bit regs */
PORT_PHY_CFG = 0x1050,
PORT_SLOT_STAT = 0x1800,
PORT_CMD_ACTIVATE = 0x1c00, /* 64 bit cmd activate * 31 (248 bytes) */
PORT_EXEC_DIAG = 0x1e00, /* 32bit exec diag * 16 (64 bytes, 0-10 used on 3124) */
PORT_PSD_DIAG = 0x1e40, /* 32bit psd diag * 16 (64 bytes, 0-8 used on 3124) */
PORT_SCONTROL = 0x1f00,
PORT_SSTATUS = 0x1f04,
PORT_SERROR = 0x1f08,
PORT_SACTIVE = 0x1f0c,
/* PORT_CTRL_STAT bits */
PORT_CS_PORT_RST = (1 << 0), /* port reset */
PORT_CS_DEV_RST = (1 << 1), /* device reset */
PORT_CS_INIT = (1 << 2), /* port initialize */
PORT_CS_IRQ_WOC = (1 << 3), /* interrupt write one to clear */
PORT_CS_CDB16 = (1 << 5), /* 0=12b cdb, 1=16b cdb */
PORT_CS_RESUME = (1 << 6), /* port resume */
PORT_CS_32BIT_ACTV = (1 << 10), /* 32-bit activation */
PORT_CS_PM_EN = (1 << 13), /* port multiplier enable */
PORT_CS_RDY = (1 << 31), /* port ready to accept commands */
/* PORT_IRQ_STAT/ENABLE_SET/CLR */
/* bits[11:0] are masked */
PORT_IRQ_COMPLETE = (1 << 0), /* command(s) completed */
PORT_IRQ_ERROR = (1 << 1), /* command execution error */
PORT_IRQ_PORTRDY_CHG = (1 << 2), /* port ready change */
PORT_IRQ_PWR_CHG = (1 << 3), /* power management change */
PORT_IRQ_PHYRDY_CHG = (1 << 4), /* PHY ready change */
PORT_IRQ_COMWAKE = (1 << 5), /* COMWAKE received */
PORT_IRQ_UNK_FIS = (1 << 6), /* Unknown FIS received */
PORT_IRQ_SDB_FIS = (1 << 11), /* SDB FIS received */
/* bits[27:16] are unmasked (raw) */
PORT_IRQ_RAW_SHIFT = 16,
PORT_IRQ_MASKED_MASK = 0x7ff,
PORT_IRQ_RAW_MASK = (0x7ff << PORT_IRQ_RAW_SHIFT),
/* ENABLE_SET/CLR specific, intr steering - 2 bit field */
PORT_IRQ_STEER_SHIFT = 30,
PORT_IRQ_STEER_MASK = (3 << PORT_IRQ_STEER_SHIFT),
/* PORT_CMD_ERR constants */
PORT_CERR_DEV = 1, /* Error bit in D2H Register FIS */
PORT_CERR_SDB = 2, /* Error bit in SDB FIS */
PORT_CERR_DATA = 3, /* Error in data FIS not detected by dev */
PORT_CERR_SEND = 4, /* Initial cmd FIS transmission failure */
PORT_CERR_INCONSISTENT = 5, /* Protocol mismatch */
PORT_CERR_DIRECTION = 6, /* Data direction mismatch */
PORT_CERR_UNDERRUN = 7, /* Ran out of SGEs while writing */
PORT_CERR_OVERRUN = 8, /* Ran out of SGEs while reading */
PORT_CERR_PKT_PROT = 11, /* DIR invalid in 1st PIO setup of ATAPI */
PORT_CERR_SGT_BOUNDARY = 16, /* PLD ecode 00 - SGT not on qword boundary */
PORT_CERR_SGT_TGTABRT = 17, /* PLD ecode 01 - target abort */
PORT_CERR_SGT_MSTABRT = 18, /* PLD ecode 10 - master abort */
PORT_CERR_SGT_PCIPERR = 19, /* PLD ecode 11 - PCI parity err while fetching SGT */
PORT_CERR_CMD_BOUNDARY = 24, /* ctrl[15:13] 001 - PRB not on qword boundary */
PORT_CERR_CMD_TGTABRT = 25, /* ctrl[15:13] 010 - target abort */
PORT_CERR_CMD_MSTABRT = 26, /* ctrl[15:13] 100 - master abort */
PORT_CERR_CMD_PCIPERR = 27, /* ctrl[15:13] 110 - PCI parity err while fetching PRB */
PORT_CERR_XFR_UNDEF = 32, /* PSD ecode 00 - undefined */
PORT_CERR_XFR_TGTABRT = 33, /* PSD ecode 01 - target abort */
PORT_CERR_XFR_MSGABRT = 34, /* PSD ecode 10 - master abort */
PORT_CERR_XFR_PCIPERR = 35, /* PSD ecode 11 - PCI prity err during transfer */
PORT_CERR_SENDSERVICE = 36, /* FIS received while sending service */
/* bits of PRB control field */
PRB_CTRL_PROTOCOL = (1 << 0), /* override def. ATA protocol */
PRB_CTRL_PACKET_READ = (1 << 4), /* PACKET cmd read */
PRB_CTRL_PACKET_WRITE = (1 << 5), /* PACKET cmd write */
PRB_CTRL_NIEN = (1 << 6), /* Mask completion irq */
PRB_CTRL_SRST = (1 << 7), /* Soft reset request (ign BSY?) */
/* PRB protocol field */
PRB_PROT_PACKET = (1 << 0),
PRB_PROT_TCQ = (1 << 1),
PRB_PROT_NCQ = (1 << 2),
PRB_PROT_READ = (1 << 3),
PRB_PROT_WRITE = (1 << 4),
PRB_PROT_TRANSPARENT = (1 << 5),
/*
* Other constants
*/
SGE_TRM = (1 << 31), /* Last SGE in chain */
SGE_LNK = (1 << 30), /* linked list
Points to SGT, not SGE */
SGE_DRD = (1 << 29), /* discard data read (/dev/null)
data address ignored */
/* board id */
BID_SIL3124 = 0,
BID_SIL3132 = 1,
BID_SIL3131 = 2,
IRQ_STAT_4PORTS = 0xf,
};
struct sil24_ata_block {
struct sil24_prb prb;
struct sil24_sge sge[LIBATA_MAX_PRD];
};
struct sil24_atapi_block {
struct sil24_prb prb;
u8 cdb[16];
struct sil24_sge sge[LIBATA_MAX_PRD - 1];
};
union sil24_cmd_block {
struct sil24_ata_block ata;
struct sil24_atapi_block atapi;
};
/*
* ap->private_data
*
* The preview driver always returned 0 for status. We emulate it
* here from the previous interrupt.
*/
struct sil24_port_priv {
union sil24_cmd_block *cmd_block; /* 32 cmd blocks */
dma_addr_t cmd_block_dma; /* DMA base addr for them */
struct ata_taskfile tf; /* Cached taskfile registers */
};
/* ap->host_set->private_data */
struct sil24_host_priv {
void __iomem *host_base; /* global controller control (128 bytes @BAR0) */
void __iomem *port_base; /* port registers (4 * 8192 bytes @BAR2) */
};
static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev);
static u8 sil24_check_status(struct ata_port *ap);
static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg);
static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val);
static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
static int sil24_probe_reset(struct ata_port *ap, unsigned int *classes);
static void sil24_qc_prep(struct ata_queued_cmd *qc);
static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc);
static void sil24_irq_clear(struct ata_port *ap);
static void sil24_eng_timeout(struct ata_port *ap);
static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
static int sil24_port_start(struct ata_port *ap);
static void sil24_port_stop(struct ata_port *ap);
static void sil24_host_stop(struct ata_host_set *host_set);
static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
static const struct pci_device_id sil24_pci_tbl[] = {
{ 0x1095, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 },
{ 0x8086, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 },
{ 0x1095, 0x3132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3132 },
{ 0x1095, 0x3131, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3131 },
{ 0x1095, 0x3531, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3131 },
{ } /* terminate list */
};
static struct pci_driver sil24_pci_driver = {
.name = DRV_NAME,
.id_table = sil24_pci_tbl,
.probe = sil24_init_one,
.remove = ata_pci_remove_one, /* safe? */
};
static struct scsi_host_template sil24_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.eh_timed_out = ata_scsi_timed_out,
.eh_strategy_handler = ata_scsi_error,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
};
static const struct ata_port_operations sil24_ops = {
.port_disable = ata_port_disable,
.dev_config = sil24_dev_config,
.check_status = sil24_check_status,
.check_altstatus = sil24_check_status,
.dev_select = ata_noop_dev_select,
.tf_read = sil24_tf_read,
.probe_reset = sil24_probe_reset,
.qc_prep = sil24_qc_prep,
.qc_issue = sil24_qc_issue,
.eng_timeout = sil24_eng_timeout,
.irq_handler = sil24_interrupt,
.irq_clear = sil24_irq_clear,
.scr_read = sil24_scr_read,
.scr_write = sil24_scr_write,
.port_start = sil24_port_start,
.port_stop = sil24_port_stop,
.host_stop = sil24_host_stop,
};
/*
* Use bits 30-31 of host_flags to encode available port numbers.
* Current maxium is 4.
*/
#define SIL24_NPORTS2FLAG(nports) ((((unsigned)(nports) - 1) & 0x3) << 30)
#define SIL24_FLAG2NPORTS(flag) ((((flag) >> 30) & 0x3) + 1)
static struct ata_port_info sil24_port_info[] = {
/* sil_3124 */
{
.sht = &sil24_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
SIL24_NPORTS2FLAG(4),
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
.port_ops = &sil24_ops,
},
/* sil_3132 */
{
.sht = &sil24_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
SIL24_NPORTS2FLAG(2),
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
.port_ops = &sil24_ops,
},
/* sil_3131/sil_3531 */
{
.sht = &sil24_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
SIL24_NPORTS2FLAG(1),
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
.port_ops = &sil24_ops,
},
};
static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev)
{
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
if (dev->cdb_len == 16)
writel(PORT_CS_CDB16, port + PORT_CTRL_STAT);
else
writel(PORT_CS_CDB16, port + PORT_CTRL_CLR);
}
static inline void sil24_update_tf(struct ata_port *ap)
{
struct sil24_port_priv *pp = ap->private_data;
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
struct sil24_prb __iomem *prb = port;
u8 fis[6 * 4];
memcpy_fromio(fis, prb->fis, 6 * 4);
ata_tf_from_fis(fis, &pp->tf);
}
static u8 sil24_check_status(struct ata_port *ap)
{
struct sil24_port_priv *pp = ap->private_data;
return pp->tf.command;
}
static int sil24_scr_map[] = {
[SCR_CONTROL] = 0,
[SCR_STATUS] = 1,
[SCR_ERROR] = 2,
[SCR_ACTIVE] = 3,
};
static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg)
{
void __iomem *scr_addr = (void __iomem *)ap->ioaddr.scr_addr;
if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
void __iomem *addr;
addr = scr_addr + sil24_scr_map[sc_reg] * 4;
return readl(scr_addr + sil24_scr_map[sc_reg] * 4);
}
return 0xffffffffU;
}
static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val)
{
void __iomem *scr_addr = (void __iomem *)ap->ioaddr.scr_addr;
if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
void __iomem *addr;
addr = scr_addr + sil24_scr_map[sc_reg] * 4;
writel(val, scr_addr + sil24_scr_map[sc_reg] * 4);
}
}
static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
struct sil24_port_priv *pp = ap->private_data;
*tf = pp->tf;
}
static int sil24_softreset(struct ata_port *ap, int verbose,
unsigned int *class)
{
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
struct sil24_port_priv *pp = ap->private_data;
struct sil24_prb *prb = &pp->cmd_block[0].ata.prb;
dma_addr_t paddr = pp->cmd_block_dma;
unsigned long timeout = jiffies + ATA_TMOUT_BOOT * HZ;
u32 irq_enable, irq_stat;
DPRINTK("ENTER\n");
if (!sata_dev_present(ap)) {
DPRINTK("PHY reports no device\n");
*class = ATA_DEV_NONE;
goto out;
}
/* temporarily turn off IRQs during SRST */
irq_enable = readl(port + PORT_IRQ_ENABLE_SET);
writel(irq_enable, port + PORT_IRQ_ENABLE_CLR);
/*
* XXX: Not sure whether the following sleep is needed or not.
* The original driver had it. So....
*/
msleep(10);
prb->ctrl = PRB_CTRL_SRST;
prb->fis[1] = 0; /* no PM yet */
writel((u32)paddr, port + PORT_CMD_ACTIVATE);
do {
irq_stat = readl(port + PORT_IRQ_STAT);
writel(irq_stat, port + PORT_IRQ_STAT); /* clear irq */
irq_stat >>= PORT_IRQ_RAW_SHIFT;
if (irq_stat & (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR))
break;
msleep(100);
} while (time_before(jiffies, timeout));
/* restore IRQs */
writel(irq_enable, port + PORT_IRQ_ENABLE_SET);
if (!(irq_stat & PORT_IRQ_COMPLETE)) {
DPRINTK("EXIT, srst failed\n");
return -EIO;
}
sil24_update_tf(ap);
*class = ata_dev_classify(&pp->tf);
if (*class == ATA_DEV_UNKNOWN)
*class = ATA_DEV_NONE;
out:
DPRINTK("EXIT, class=%u\n", *class);
return 0;
}
static int sil24_hardreset(struct ata_port *ap, int verbose,
unsigned int *class)
{
unsigned int dummy_class;
/* sil24 doesn't report device signature after hard reset */
return sata_std_hardreset(ap, verbose, &dummy_class);
}
static int sil24_probe_reset(struct ata_port *ap, unsigned int *classes)
{
return ata_drive_probe_reset(ap, ata_std_probeinit,
sil24_softreset, sil24_hardreset,
ata_std_postreset, classes);
}
static inline void sil24_fill_sg(struct ata_queued_cmd *qc,
struct sil24_sge *sge)
{
struct scatterlist *sg;
unsigned int idx = 0;
ata_for_each_sg(sg, qc) {
sge->addr = cpu_to_le64(sg_dma_address(sg));
sge->cnt = cpu_to_le32(sg_dma_len(sg));
if (ata_sg_is_last(sg, qc))
sge->flags = cpu_to_le32(SGE_TRM);
else
sge->flags = 0;
sge++;
idx++;
}
}
static void sil24_qc_prep(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct sil24_port_priv *pp = ap->private_data;
union sil24_cmd_block *cb = pp->cmd_block + qc->tag;
struct sil24_prb *prb;
struct sil24_sge *sge;
switch (qc->tf.protocol) {
case ATA_PROT_PIO:
case ATA_PROT_DMA:
case ATA_PROT_NODATA:
prb = &cb->ata.prb;
sge = cb->ata.sge;
prb->ctrl = 0;
break;
case ATA_PROT_ATAPI:
case ATA_PROT_ATAPI_DMA:
case ATA_PROT_ATAPI_NODATA:
prb = &cb->atapi.prb;
sge = cb->atapi.sge;
memset(cb->atapi.cdb, 0, 32);
memcpy(cb->atapi.cdb, qc->cdb, qc->dev->cdb_len);
if (qc->tf.protocol != ATA_PROT_ATAPI_NODATA) {
if (qc->tf.flags & ATA_TFLAG_WRITE)
prb->ctrl = PRB_CTRL_PACKET_WRITE;
else
prb->ctrl = PRB_CTRL_PACKET_READ;
} else
prb->ctrl = 0;
break;
default:
prb = NULL; /* shut up, gcc */
sge = NULL;
BUG();
}
ata_tf_to_fis(&qc->tf, prb->fis, 0);
if (qc->flags & ATA_QCFLAG_DMAMAP)
sil24_fill_sg(qc, sge);
}
static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
struct sil24_port_priv *pp = ap->private_data;
dma_addr_t paddr = pp->cmd_block_dma + qc->tag * sizeof(*pp->cmd_block);
writel((u32)paddr, port + PORT_CMD_ACTIVATE);
return 0;
}
static void sil24_irq_clear(struct ata_port *ap)
{
/* unused */
}
static int __sil24_restart_controller(void __iomem *port)
{
u32 tmp;
int cnt;
writel(PORT_CS_INIT, port + PORT_CTRL_STAT);
/* Max ~10ms */
for (cnt = 0; cnt < 10000; cnt++) {
tmp = readl(port + PORT_CTRL_STAT);
if (tmp & PORT_CS_RDY)
return 0;
udelay(1);
}
return -1;
}
static void sil24_restart_controller(struct ata_port *ap)
{
if (__sil24_restart_controller((void __iomem *)ap->ioaddr.cmd_addr))
printk(KERN_ERR DRV_NAME
" ata%u: failed to restart controller\n", ap->id);
}
static int __sil24_reset_controller(void __iomem *port)
{
int cnt;
u32 tmp;
/* Reset controller state. Is this correct? */
writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT);
readl(port + PORT_CTRL_STAT); /* sync */
/* Max ~100ms */
for (cnt = 0; cnt < 1000; cnt++) {
udelay(100);
tmp = readl(port + PORT_CTRL_STAT);
if (!(tmp & PORT_CS_DEV_RST))
break;
}
if (tmp & PORT_CS_DEV_RST)
return -1;
if (tmp & PORT_CS_RDY)
return 0;
return __sil24_restart_controller(port);
}
static void sil24_reset_controller(struct ata_port *ap)
{
printk(KERN_NOTICE DRV_NAME
" ata%u: resetting controller...\n", ap->id);
if (__sil24_reset_controller((void __iomem *)ap->ioaddr.cmd_addr))
printk(KERN_ERR DRV_NAME
" ata%u: failed to reset controller\n", ap->id);
}
static void sil24_eng_timeout(struct ata_port *ap)
{
struct ata_queued_cmd *qc;
qc = ata_qc_from_tag(ap, ap->active_tag);
printk(KERN_ERR "ata%u: command timeout\n", ap->id);
qc->err_mask |= AC_ERR_TIMEOUT;
ata_eh_qc_complete(qc);
sil24_reset_controller(ap);
}
static void sil24_error_intr(struct ata_port *ap, u32 slot_stat)
{
struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
struct sil24_port_priv *pp = ap->private_data;
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
u32 irq_stat, cmd_err, sstatus, serror;
unsigned int err_mask;
irq_stat = readl(port + PORT_IRQ_STAT);
writel(irq_stat, port + PORT_IRQ_STAT); /* clear irq */
if (!(irq_stat & PORT_IRQ_ERROR)) {
/* ignore non-completion, non-error irqs for now */
printk(KERN_WARNING DRV_NAME
"ata%u: non-error exception irq (irq_stat %x)\n",
ap->id, irq_stat);
return;
}
cmd_err = readl(port + PORT_CMD_ERR);
sstatus = readl(port + PORT_SSTATUS);
serror = readl(port + PORT_SERROR);
if (serror)
writel(serror, port + PORT_SERROR);
/*
* Don't log ATAPI device errors. They're supposed to happen
* and any serious errors will be logged using sense data by
* the SCSI layer.
*/
if (ap->device[0].class != ATA_DEV_ATAPI || cmd_err > PORT_CERR_SDB)
printk("ata%u: error interrupt on port%d\n"
" stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n",
ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror);
if (cmd_err == PORT_CERR_DEV || cmd_err == PORT_CERR_SDB) {
/*
* Device is reporting error, tf registers are valid.
*/
sil24_update_tf(ap);
err_mask = ac_err_mask(pp->tf.command);
sil24_restart_controller(ap);
} else {
/*
* Other errors. libata currently doesn't have any
* mechanism to report these errors. Just turn on
* ATA_ERR.
*/
err_mask = AC_ERR_OTHER;
sil24_reset_controller(ap);
}
if (qc) {
qc->err_mask |= err_mask;
ata_qc_complete(qc);
}
}
static inline void sil24_host_intr(struct ata_port *ap)
{
struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
u32 slot_stat;
slot_stat = readl(port + PORT_SLOT_STAT);
if (!(slot_stat & HOST_SSTAT_ATTN)) {
struct sil24_port_priv *pp = ap->private_data;
/*
* !HOST_SSAT_ATTN guarantees successful completion,
* so reading back tf registers is unnecessary for
* most commands. TODO: read tf registers for
* commands which require these values on successful
* completion (EXECUTE DEVICE DIAGNOSTIC, CHECK POWER,
* DEVICE RESET and READ PORT MULTIPLIER (any more?).
*/
sil24_update_tf(ap);
if (qc) {
qc->err_mask |= ac_err_mask(pp->tf.command);
ata_qc_complete(qc);
}
} else
sil24_error_intr(ap, slot_stat);
}
static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
{
struct ata_host_set *host_set = dev_instance;
struct sil24_host_priv *hpriv = host_set->private_data;
unsigned handled = 0;
u32 status;
int i;
status = readl(hpriv->host_base + HOST_IRQ_STAT);
if (status == 0xffffffff) {
printk(KERN_ERR DRV_NAME ": IRQ status == 0xffffffff, "
"PCI fault or device removal?\n");
goto out;
}
if (!(status & IRQ_STAT_4PORTS))
goto out;
spin_lock(&host_set->lock);
for (i = 0; i < host_set->n_ports; i++)
if (status & (1 << i)) {
struct ata_port *ap = host_set->ports[i];
if (ap && !(ap->flags & ATA_FLAG_PORT_DISABLED)) {
sil24_host_intr(host_set->ports[i]);
handled++;
} else
printk(KERN_ERR DRV_NAME
": interrupt from disabled port %d\n", i);
}
spin_unlock(&host_set->lock);
out:
return IRQ_RETVAL(handled);
}
static inline void sil24_cblk_free(struct sil24_port_priv *pp, struct device *dev)
{
const size_t cb_size = sizeof(*pp->cmd_block);
dma_free_coherent(dev, cb_size, pp->cmd_block, pp->cmd_block_dma);
}
static int sil24_port_start(struct ata_port *ap)
{
struct device *dev = ap->host_set->dev;
struct sil24_port_priv *pp;
union sil24_cmd_block *cb;
size_t cb_size = sizeof(*cb);
dma_addr_t cb_dma;
int rc = -ENOMEM;
pp = kzalloc(sizeof(*pp), GFP_KERNEL);
if (!pp)
goto err_out;
pp->tf.command = ATA_DRDY;
cb = dma_alloc_coherent(dev, cb_size, &cb_dma, GFP_KERNEL);
if (!cb)
goto err_out_pp;
memset(cb, 0, cb_size);
rc = ata_pad_alloc(ap, dev);
if (rc)
goto err_out_pad;
pp->cmd_block = cb;
pp->cmd_block_dma = cb_dma;
ap->private_data = pp;
return 0;
err_out_pad:
sil24_cblk_free(pp, dev);
err_out_pp:
kfree(pp);
err_out:
return rc;
}
static void sil24_port_stop(struct ata_port *ap)
{
struct device *dev = ap->host_set->dev;
struct sil24_port_priv *pp = ap->private_data;
sil24_cblk_free(pp, dev);
ata_pad_free(ap, dev);
kfree(pp);
}
static void sil24_host_stop(struct ata_host_set *host_set)
{
struct sil24_host_priv *hpriv = host_set->private_data;
iounmap(hpriv->host_base);
iounmap(hpriv->port_base);
kfree(hpriv);
}
static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version = 0;
unsigned int board_id = (unsigned int)ent->driver_data;
struct ata_port_info *pinfo = &sil24_port_info[board_id];
struct ata_probe_ent *probe_ent = NULL;
struct sil24_host_priv *hpriv = NULL;
void __iomem *host_base = NULL;
void __iomem *port_base = NULL;
int i, rc;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
rc = pci_enable_device(pdev);
if (rc)
return rc;
rc = pci_request_regions(pdev, DRV_NAME);
if (rc)
goto out_disable;
rc = -ENOMEM;
/* ioremap mmio registers */
host_base = ioremap(pci_resource_start(pdev, 0),
pci_resource_len(pdev, 0));
if (!host_base)
goto out_free;
port_base = ioremap(pci_resource_start(pdev, 2),
pci_resource_len(pdev, 2));
if (!port_base)
goto out_free;
/* allocate & init probe_ent and hpriv */
probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
if (!probe_ent)
goto out_free;
hpriv = kmalloc(sizeof(*hpriv), GFP_KERNEL);
if (!hpriv)
goto out_free;
memset(probe_ent, 0, sizeof(*probe_ent));
probe_ent->dev = pci_dev_to_dev(pdev);
INIT_LIST_HEAD(&probe_ent->node);
probe_ent->sht = pinfo->sht;
probe_ent->host_flags = pinfo->host_flags;
probe_ent->pio_mask = pinfo->pio_mask;
probe_ent->mwdma_mask = pinfo->mwdma_mask;
probe_ent->udma_mask = pinfo->udma_mask;
probe_ent->port_ops = pinfo->port_ops;
probe_ent->n_ports = SIL24_FLAG2NPORTS(pinfo->host_flags);
probe_ent->irq = pdev->irq;
probe_ent->irq_flags = SA_SHIRQ;
probe_ent->mmio_base = port_base;
probe_ent->private_data = hpriv;
memset(hpriv, 0, sizeof(*hpriv));
hpriv->host_base = host_base;
hpriv->port_base = port_base;
/*
* Configure the device
*/
/*
* FIXME: This device is certainly 64-bit capable. We just
* don't know how to use it. After fixing 32bit activation in
* this function, enable 64bit masks here.
*/
rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"32-bit DMA enable failed\n");
goto out_free;
}
rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"32-bit consistent DMA enable failed\n");
goto out_free;
}
/* GPIO off */
writel(0, host_base + HOST_FLASH_CMD);
/* Mask interrupts during initialization */
writel(0, host_base + HOST_CTRL);
for (i = 0; i < probe_ent->n_ports; i++) {
void __iomem *port = port_base + i * PORT_REGS_SIZE;
unsigned long portu = (unsigned long)port;
u32 tmp;
int cnt;
probe_ent->port[i].cmd_addr = portu + PORT_PRB;
probe_ent->port[i].scr_addr = portu + PORT_SCONTROL;
ata_std_ports(&probe_ent->port[i]);
/* Initial PHY setting */
writel(0x20c, port + PORT_PHY_CFG);
/* Clear port RST */
tmp = readl(port + PORT_CTRL_STAT);
if (tmp & PORT_CS_PORT_RST) {
writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR);
readl(port + PORT_CTRL_STAT); /* sync */
for (cnt = 0; cnt < 10; cnt++) {
msleep(10);
tmp = readl(port + PORT_CTRL_STAT);
if (!(tmp & PORT_CS_PORT_RST))
break;
}
if (tmp & PORT_CS_PORT_RST)
dev_printk(KERN_ERR, &pdev->dev,
"failed to clear port RST\n");
}
/* Zero error counters. */
writel(0x8000, port + PORT_DECODE_ERR_THRESH);
writel(0x8000, port + PORT_CRC_ERR_THRESH);
writel(0x8000, port + PORT_HSHK_ERR_THRESH);
writel(0x0000, port + PORT_DECODE_ERR_CNT);
writel(0x0000, port + PORT_CRC_ERR_CNT);
writel(0x0000, port + PORT_HSHK_ERR_CNT);
/* FIXME: 32bit activation? */
writel(0, port + PORT_ACTIVATE_UPPER_ADDR);
writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_STAT);
/* Configure interrupts */
writel(0xffff, port + PORT_IRQ_ENABLE_CLR);
writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR | PORT_IRQ_SDB_FIS,
port + PORT_IRQ_ENABLE_SET);
/* Clear interrupts */
writel(0x0fff0fff, port + PORT_IRQ_STAT);
writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
/* Clear port multiplier enable and resume bits */
writel(PORT_CS_PM_EN | PORT_CS_RESUME, port + PORT_CTRL_CLR);
/* Reset itself */
if (__sil24_reset_controller(port))
dev_printk(KERN_ERR, &pdev->dev,
"failed to reset controller\n");
}
/* Turn on interrupts */
writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL);
pci_set_master(pdev);
/* FIXME: check ata_device_add return value */
ata_device_add(probe_ent);
kfree(probe_ent);
return 0;
out_free:
if (host_base)
iounmap(host_base);
if (port_base)
iounmap(port_base);
kfree(probe_ent);
kfree(hpriv);
pci_release_regions(pdev);
out_disable:
pci_disable_device(pdev);
return rc;
}
static int __init sil24_init(void)
{
return pci_module_init(&sil24_pci_driver);
}
static void __exit sil24_exit(void)
{
pci_unregister_driver(&sil24_pci_driver);
}
MODULE_AUTHOR("Tejun Heo");
MODULE_DESCRIPTION("Silicon Image 3124/3132 SATA low-level driver");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, sil24_pci_tbl);
module_init(sil24_init);
module_exit(sil24_exit);
Reference in New Issue View Git Blame Copy Permalink