mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-25 02:48:21 +00:00
5ce17b18e1
Fix 44x early serial debugging for big RAM configurations (more than 512M). We cannot use default OpenBIOS virtual mapping, because it interferes with pinned TLB entry. While we are at it, move early UART mapping to TLB slot 0, so it can survive longer during boot process (slot 1 is used by the first ioremap call, effectively killing UART mapping if it occupies this slot). Also, change UART TLB entry size to 4K (256M is too much for a bunch of registers :). Squash some warnings on the way. Tested on Ebony and Ocotea with 1G of RAM. Thanks to Scott Coulter <scott.coulter@cyclone.com> for diagnosing this problem. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
98 lines
2.7 KiB
C
98 lines
2.7 KiB
C
/*
|
|
* arch/ppc/platforms/ocotea.h
|
|
*
|
|
* Ocotea board definitions
|
|
*
|
|
* Matt Porter <mporter@kernel.crashing.org>
|
|
*
|
|
* Copyright 2003-2005 MontaVista Software Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
|
|
#ifdef __KERNEL__
|
|
#ifndef __ASM_OCOTEA_H__
|
|
#define __ASM_OCOTEA_H__
|
|
|
|
#include <linux/config.h>
|
|
#include <platforms/4xx/ibm440gx.h>
|
|
|
|
/* F/W TLB mapping used in bootloader glue to reset EMAC */
|
|
#define PPC44x_EMAC0_MR0 0xe0000800
|
|
|
|
/* Location of MAC addresses in PIBS image */
|
|
#define PIBS_FLASH_BASE 0xfff00000
|
|
#define PIBS_MAC_BASE (PIBS_FLASH_BASE+0xb0500)
|
|
#define PIBS_MAC_SIZE 0x200
|
|
#define PIBS_MAC_OFFSET 0x100
|
|
|
|
/* External timer clock frequency */
|
|
#define OCOTEA_TMR_CLK 25000000
|
|
|
|
/* RTC/NVRAM location */
|
|
#define OCOTEA_RTC_ADDR 0x0000000148000000ULL
|
|
#define OCOTEA_RTC_SIZE 0x2000
|
|
|
|
/* Flash */
|
|
#define OCOTEA_FPGA_REG_0 0x0000000148300000ULL
|
|
#define OCOTEA_BOOT_LARGE_FLASH(x) (x & 0x40)
|
|
#define OCOTEA_SMALL_FLASH_LOW 0x00000001ff900000ULL
|
|
#define OCOTEA_SMALL_FLASH_HIGH 0x00000001fff00000ULL
|
|
#define OCOTEA_SMALL_FLASH_SIZE 0x100000
|
|
#define OCOTEA_LARGE_FLASH_LOW 0x00000001ff800000ULL
|
|
#define OCOTEA_LARGE_FLASH_HIGH 0x00000001ffc00000ULL
|
|
#define OCOTEA_LARGE_FLASH_SIZE 0x400000
|
|
|
|
/* FPGA_REG_3 (Ethernet Groups) */
|
|
#define OCOTEA_FPGA_REG_3 0x0000000148300003ULL
|
|
|
|
/*
|
|
* Serial port defines
|
|
*/
|
|
#define RS_TABLE_SIZE 2
|
|
|
|
#if defined(__BOOTER__)
|
|
/* OpenBIOS defined UART mappings, used by bootloader shim */
|
|
#define UART0_IO_BASE 0xE0000200
|
|
#define UART1_IO_BASE 0xE0000300
|
|
#else
|
|
/* head_44x.S created UART mapping, used before early_serial_setup.
|
|
* We cannot use default OpenBIOS UART mappings because they
|
|
* don't work for configurations with more than 512M RAM. --ebs
|
|
*/
|
|
#define UART0_IO_BASE 0xF0000200
|
|
#define UART1_IO_BASE 0xF0000300
|
|
#endif
|
|
|
|
#define BASE_BAUD 11059200/16
|
|
#define STD_UART_OP(num) \
|
|
{ 0, BASE_BAUD, 0, UART##num##_INT, \
|
|
(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
|
|
iomem_base: (void*)UART##num##_IO_BASE, \
|
|
io_type: SERIAL_IO_MEM},
|
|
|
|
#define SERIAL_PORT_DFNS \
|
|
STD_UART_OP(0) \
|
|
STD_UART_OP(1)
|
|
|
|
/* PCI support */
|
|
#define OCOTEA_PCI_LOWER_IO 0x00000000
|
|
#define OCOTEA_PCI_UPPER_IO 0x0000ffff
|
|
#define OCOTEA_PCI_LOWER_MEM 0x80000000
|
|
#define OCOTEA_PCI_UPPER_MEM 0xffffefff
|
|
|
|
#define OCOTEA_PCI_CFGREGS_BASE 0x000000020ec00000ULL
|
|
#define OCOTEA_PCI_CFGA_PLB32 0x0ec00000
|
|
#define OCOTEA_PCI_CFGD_PLB32 0x0ec00004
|
|
|
|
#define OCOTEA_PCI_IO_BASE 0x0000000208000000ULL
|
|
#define OCOTEA_PCI_IO_SIZE 0x00010000
|
|
#define OCOTEA_PCI_MEM_OFFSET 0x00000000
|
|
|
|
#endif /* __ASM_OCOTEA_H__ */
|
|
#endif /* __KERNEL__ */
|