linux/arch/arm/mach-ux500/usb.c
Linus Walleij 174e779662 ARM: ux500: get rid of <mach/[hardware|db8500-regs].h>
This removes <mach/hardware.h> and <mach/db8500-regs.h>
from the Ux500, merging them into the local include
"db8500-regs.h" in mach-ux500. There is some impact
outside the ux500 machine, but most of it is dealt with
in earlier patches.

Contains portions of a clean-up patch from Arnd Bergmann.

Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-08 13:59:28 +02:00

159 lines
3.9 KiB
C

/*
* Copyright (C) ST-Ericsson SA 2011
*
* Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
* License terms: GNU General Public License (GPL) version 2
*/
#include <linux/platform_device.h>
#include <linux/usb/musb.h>
#include <linux/dma-mapping.h>
#include <linux/platform_data/usb-musb-ux500.h>
#include <linux/platform_data/dma-ste-dma40.h>
#include "db8500-regs.h"
#define MUSB_DMA40_RX_CH { \
.mode = STEDMA40_MODE_LOGICAL, \
.dir = STEDMA40_PERIPH_TO_MEM, \
.dst_dev_type = STEDMA40_DEV_DST_MEMORY, \
.src_info.data_width = STEDMA40_WORD_WIDTH, \
.dst_info.data_width = STEDMA40_WORD_WIDTH, \
.src_info.psize = STEDMA40_PSIZE_LOG_16, \
.dst_info.psize = STEDMA40_PSIZE_LOG_16, \
}
#define MUSB_DMA40_TX_CH { \
.mode = STEDMA40_MODE_LOGICAL, \
.dir = STEDMA40_MEM_TO_PERIPH, \
.src_dev_type = STEDMA40_DEV_SRC_MEMORY, \
.src_info.data_width = STEDMA40_WORD_WIDTH, \
.dst_info.data_width = STEDMA40_WORD_WIDTH, \
.src_info.psize = STEDMA40_PSIZE_LOG_16, \
.dst_info.psize = STEDMA40_PSIZE_LOG_16, \
}
static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_CHANNELS]
= {
MUSB_DMA40_RX_CH,
MUSB_DMA40_RX_CH,
MUSB_DMA40_RX_CH,
MUSB_DMA40_RX_CH,
MUSB_DMA40_RX_CH,
MUSB_DMA40_RX_CH,
MUSB_DMA40_RX_CH,
MUSB_DMA40_RX_CH
};
static struct stedma40_chan_cfg musb_dma_tx_ch[UX500_MUSB_DMA_NUM_TX_CHANNELS]
= {
MUSB_DMA40_TX_CH,
MUSB_DMA40_TX_CH,
MUSB_DMA40_TX_CH,
MUSB_DMA40_TX_CH,
MUSB_DMA40_TX_CH,
MUSB_DMA40_TX_CH,
MUSB_DMA40_TX_CH,
MUSB_DMA40_TX_CH,
};
static void *ux500_dma_rx_param_array[UX500_MUSB_DMA_NUM_RX_CHANNELS] = {
&musb_dma_rx_ch[0],
&musb_dma_rx_ch[1],
&musb_dma_rx_ch[2],
&musb_dma_rx_ch[3],
&musb_dma_rx_ch[4],
&musb_dma_rx_ch[5],
&musb_dma_rx_ch[6],
&musb_dma_rx_ch[7]
};
static void *ux500_dma_tx_param_array[UX500_MUSB_DMA_NUM_TX_CHANNELS] = {
&musb_dma_tx_ch[0],
&musb_dma_tx_ch[1],
&musb_dma_tx_ch[2],
&musb_dma_tx_ch[3],
&musb_dma_tx_ch[4],
&musb_dma_tx_ch[5],
&musb_dma_tx_ch[6],
&musb_dma_tx_ch[7]
};
static struct ux500_musb_board_data musb_board_data = {
.dma_rx_param_array = ux500_dma_rx_param_array,
.dma_tx_param_array = ux500_dma_tx_param_array,
.num_rx_channels = UX500_MUSB_DMA_NUM_RX_CHANNELS,
.num_tx_channels = UX500_MUSB_DMA_NUM_TX_CHANNELS,
.dma_filter = stedma40_filter,
};
static u64 ux500_musb_dmamask = DMA_BIT_MASK(32);
static struct musb_hdrc_config musb_hdrc_config = {
.multipoint = true,
.dyn_fifo = true,
.num_eps = 16,
.ram_bits = 16,
};
static struct musb_hdrc_platform_data musb_platform_data = {
.mode = MUSB_OTG,
.config = &musb_hdrc_config,
.board_data = &musb_board_data,
};
static struct resource usb_resources[] = {
[0] = {
.name = "usb-mem",
.flags = IORESOURCE_MEM,
},
[1] = {
.name = "mc", /* hard-coded in musb */
.flags = IORESOURCE_IRQ,
},
};
struct platform_device ux500_musb_device = {
.name = "musb-ux500",
.id = 0,
.dev = {
.platform_data = &musb_platform_data,
.dma_mask = &ux500_musb_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.num_resources = ARRAY_SIZE(usb_resources),
.resource = usb_resources,
};
static inline void ux500_usb_dma_update_rx_ch_config(int *src_dev_type)
{
u32 idx;
for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_CHANNELS; idx++)
musb_dma_rx_ch[idx].src_dev_type = src_dev_type[idx];
}
static inline void ux500_usb_dma_update_tx_ch_config(int *dst_dev_type)
{
u32 idx;
for (idx = 0; idx < UX500_MUSB_DMA_NUM_TX_CHANNELS; idx++)
musb_dma_tx_ch[idx].dst_dev_type = dst_dev_type[idx];
}
void ux500_add_usb(struct device *parent, resource_size_t base, int irq,
int *dma_rx_cfg, int *dma_tx_cfg)
{
ux500_musb_device.resource[0].start = base;
ux500_musb_device.resource[0].end = base + SZ_64K - 1;
ux500_musb_device.resource[1].start = irq;
ux500_musb_device.resource[1].end = irq;
ux500_usb_dma_update_rx_ch_config(dma_rx_cfg);
ux500_usb_dma_update_tx_ch_config(dma_tx_cfg);
ux500_musb_device.dev.parent = parent;
platform_device_register(&ux500_musb_device);
}