FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2024-12-21 00:42:16 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
e52e6080ca
linux/Documentation/watchdog/watchdog-api.txt
Matt LaPlante 84eb8d0608 Fix "can not" in Documentation and Kconfig 
Randy brought it to my attention that in proper english "can not" should always
be written "cannot". I donot see any reason to argue, even if I mightnot
understand why this rule exists.  This patch fixes "can not" in several
Documentation files as well as three Kconfigs.

Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03 22:53:09 +02:00

445 lines
14 KiB
Plaintext
Raw Blame History

The Linux Watchdog driver API.
Copyright 2002 Christer Weingel <wingel@nano-system.com>
Some parts of this document are copied verbatim from the sbc60xxwdt
driver which is (c) Copyright 2000 Jakob Oestergaard <jakob@ostenfeld.dk>
This document describes the state of the Linux 2.4.18 kernel.
Introduction:
A Watchdog Timer (WDT) is a hardware circuit that can reset the
computer system in case of a software fault. You probably knew that
already.
Usually a userspace daemon will notify the kernel watchdog driver via the
/dev/watchdog special device file that userspace is still alive, at
regular intervals. When such a notification occurs, the driver will
usually tell the hardware watchdog that everything is in order, and
that the watchdog should wait for yet another little while to reset
the system. If userspace fails (RAM error, kernel bug, whatever), the
notifications cease to occur, and the hardware watchdog will reset the
system (causing a reboot) after the timeout occurs.
The Linux watchdog API is a rather AD hoc construction and different
drivers implement different, and sometimes incompatible, parts of it.
This file is an attempt to document the existing usage and allow
future driver writers to use it as a reference.
The simplest API:
All drivers support the basic mode of operation, where the watchdog
activates as soon as /dev/watchdog is opened and will reboot unless
the watchdog is pinged within a certain time, this time is called the
timeout or margin. The simplest way to ping the watchdog is to write
some data to the device. So a very simple watchdog daemon would look
like this source file: see Documentation/watchdog/src/watchdog-simple.c
A more advanced driver could for example check that a HTTP server is
still responding before doing the write call to ping the watchdog.
When the device is closed, the watchdog is disabled. This is not
always such a good idea, since if there is a bug in the watchdog
daemon and it crashes the system will not reboot. Because of this,
some of the drivers support the configuration option "Disable watchdog
shutdown on close", CONFIG_WATCHDOG_NOWAYOUT. If it is set to Y when
compiling the kernel, there is no way of disabling the watchdog once
it has been started. So, if the watchdog daemon crashes, the system
will reboot after the timeout has passed.
Some other drivers will not disable the watchdog, unless a specific
magic character 'V' has been sent /dev/watchdog just before closing
the file. If the userspace daemon closes the file without sending
this special character, the driver will assume that the daemon (and
userspace in general) died, and will stop pinging the watchdog without
disabling it first. This will then cause a reboot.
The ioctl API:
All conforming drivers also support an ioctl API.
Pinging the watchdog using an ioctl:
All drivers that have an ioctl interface support at least one ioctl,
KEEPALIVE. This ioctl does exactly the same thing as a write to the
watchdog device, so the main loop in the above program could be
replaced with:
while (1) {
ioctl(fd, WDIOC_KEEPALIVE, 0);
sleep(10);
}
the argument to the ioctl is ignored.
Setting and getting the timeout:
For some drivers it is possible to modify the watchdog timeout on the
fly with the SETTIMEOUT ioctl, those drivers have the WDIOF_SETTIMEOUT
flag set in their option field. The argument is an integer
representing the timeout in seconds. The driver returns the real
timeout used in the same variable, and this timeout might differ from
the requested one due to limitation of the hardware.
int timeout = 45;
ioctl(fd, WDIOC_SETTIMEOUT, &timeout);
printf("The timeout was set to %d seconds\n", timeout);
This example might actually print "The timeout was set to 60 seconds"
if the device has a granularity of minutes for its timeout.
Starting with the Linux 2.4.18 kernel, it is possible to query the
current timeout using the GETTIMEOUT ioctl.
ioctl(fd, WDIOC_GETTIMEOUT, &timeout);
printf("The timeout was is %d seconds\n", timeout);
Pretimeouts:
Some watchdog timers can be set to have a trigger go off before the
actual time they will reset the system. This can be done with an NMI,
interrupt, or other mechanism. This allows Linux to record useful
information (like panic information and kernel coredumps) before it
resets.
pretimeout = 10;
ioctl(fd, WDIOC_SETPRETIMEOUT, &pretimeout);
Note that the pretimeout is the number of seconds before the time
when the timeout will go off. It is not the number of seconds until
the pretimeout. So, for instance, if you set the timeout to 60 seconds
and the pretimeout to 10 seconds, the pretimout will go of in 50
seconds. Setting a pretimeout to zero disables it.
There is also a get function for getting the pretimeout:
ioctl(fd, WDIOC_GETPRETIMEOUT, &timeout);
printf("The pretimeout was is %d seconds\n", timeout);
Not all watchdog drivers will support a pretimeout.
Get the number of seconds before reboot:
Some watchdog drivers have the ability to report the remaining time
before the system will reboot. The WDIOC_GETTIMELEFT is the ioctl
that returns the number of seconds before reboot.
ioctl(fd, WDIOC_GETTIMELEFT, &timeleft);
printf("The timeout was is %d seconds\n", timeleft);
Environmental monitoring:
All watchdog drivers are required return more information about the system,
some do temperature, fan and power level monitoring, some can tell you
the reason for the last reboot of the system. The GETSUPPORT ioctl is
available to ask what the device can do:
struct watchdog_info ident;
ioctl(fd, WDIOC_GETSUPPORT, &ident);
the fields returned in the ident struct are:
identity a string identifying the watchdog driver
firmware_version the firmware version of the card if available
options a flags describing what the device supports
the options field can have the following bits set, and describes what
kind of information that the GET_STATUS and GET_BOOT_STATUS ioctls can
return. [FIXME -- Is this correct?]
WDIOF_OVERHEAT Reset due to CPU overheat
The machine was last rebooted by the watchdog because the thermal limit was
exceeded
WDIOF_FANFAULT Fan failed
A system fan monitored by the watchdog card has failed
WDIOF_EXTERN1 External relay 1
External monitoring relay/source 1 was triggered. Controllers intended for
real world applications include external monitoring pins that will trigger
a reset.
WDIOF_EXTERN2 External relay 2
External monitoring relay/source 2 was triggered
WDIOF_POWERUNDER Power bad/power fault
The machine is showing an undervoltage status
WDIOF_CARDRESET Card previously reset the CPU
The last reboot was caused by the watchdog card
WDIOF_POWEROVER Power over voltage
The machine is showing an overvoltage status. Note that if one level is
under and one over both bits will be set - this may seem odd but makes
sense.
WDIOF_KEEPALIVEPING Keep alive ping reply
The watchdog saw a keepalive ping since it was last queried.
WDIOF_SETTIMEOUT Can set/get the timeout
The watchdog can do pretimeouts.
WDIOF_PRETIMEOUT Pretimeout (in seconds), get/set
For those drivers that return any bits set in the option field, the
GETSTATUS and GETBOOTSTATUS ioctls can be used to ask for the current
status, and the status at the last reboot, respectively.
int flags;
ioctl(fd, WDIOC_GETSTATUS, &flags);
or
ioctl(fd, WDIOC_GETBOOTSTATUS, &flags);
Note that not all devices support these two calls, and some only
support the GETBOOTSTATUS call.
Some drivers can measure the temperature using the GETTEMP ioctl. The
returned value is the temperature in degrees fahrenheit.
int temperature;
ioctl(fd, WDIOC_GETTEMP, &temperature);
Finally the SETOPTIONS ioctl can be used to control some aspects of
the cards operation; right now the pcwd driver is the only one
supporting thiss ioctl.
int options = 0;
ioctl(fd, WDIOC_SETOPTIONS, options);
The following options are available:
WDIOS_DISABLECARD Turn off the watchdog timer
WDIOS_ENABLECARD Turn on the watchdog timer
WDIOS_TEMPPANIC Kernel panic on temperature trip
[FIXME -- better explanations]
Implementations in the current drivers in the kernel tree:
Here I have tried to summarize what the different drivers support and
where they do strange things compared to the other drivers.
acquirewdt.c -- Acquire Single Board Computer
This driver has a hardcoded timeout of 1 minute
Supports CONFIG_WATCHDOG_NOWAYOUT
GETSUPPORT returns KEEPALIVEPING. GETSTATUS will return 1 if
the device is open, 0 if not. [FIXME -- isn't this rather
silly? To be able to use the ioctl, the device must be open
and so GETSTATUS will always return 1].
advantechwdt.c -- Advantech Single Board Computer
Timeout that defaults to 60 seconds, supports SETTIMEOUT.
Supports CONFIG_WATCHDOG_NOWAYOUT
GETSUPPORT returns WDIOF_KEEPALIVEPING and WDIOF_SETTIMEOUT.
The GETSTATUS call returns if the device is open or not.
[FIXME -- silliness again?]
booke_wdt.c -- PowerPC BookE Watchdog Timer
Timeout default varies according to frequency, supports
SETTIMEOUT
Watchdog cannot be turned off, CONFIG_WATCHDOG_NOWAYOUT
does not make sense
GETSUPPORT returns the watchdog_info struct, and
GETSTATUS returns the supported options. GETBOOTSTATUS
returns a 1 if the last reset was caused by the
watchdog and a 0 otherwise. This watchdog cannot be
disabled once it has been started. The wdt_period kernel
parameter selects which bit of the time base changing
from 0->1 will trigger the watchdog exception. Changing
the timeout from the ioctl calls will change the
wdt_period as defined above. Finally if you would like to
replace the default Watchdog Handler you can implement the
WatchdogHandler() function in your own code.
eurotechwdt.c -- Eurotech CPU-1220/1410
The timeout can be set using the SETTIMEOUT ioctl and defaults
to 60 seconds.
Also has a module parameter "ev", event type which controls
what should happen on a timeout, the string "int" or anything
else that causes a reboot. [FIXME -- better description]
Supports CONFIG_WATCHDOG_NOWAYOUT
GETSUPPORT returns CARDRESET and WDIOF_SETTIMEOUT but
GETSTATUS is not supported and GETBOOTSTATUS just returns 0.
i810-tco.c -- Intel 810 chipset
Also has support for a lot of other i8x0 stuff, but the
watchdog is one of the things.
The timeout is set using the module parameter "i810_margin",
which is in steps of 0.6 seconds where 2<i810_margin<64. The
driver supports the SETTIMEOUT ioctl.
Supports CONFIG_WATCHDOG_NOWAYOUT.
GETSUPPORT returns WDIOF_SETTIMEOUT. The GETSTATUS call
returns some kind of timer value which ist not compatible with
the other drivers. GETBOOT status returns some kind of
hardware specific boot status. [FIXME -- describe this]
ib700wdt.c -- IB700 Single Board Computer
Default timeout of 30 seconds and the timeout is settable
using the SETTIMEOUT ioctl. Note that only a few timeout
values are supported.
Supports CONFIG_WATCHDOG_NOWAYOUT
GETSUPPORT returns WDIOF_KEEPALIVEPING and WDIOF_SETTIMEOUT.
The GETSTATUS call returns if the device is open or not.
[FIXME -- silliness again?]
machzwd.c -- MachZ ZF-Logic
Hardcoded timeout of 10 seconds
Has a module parameter "action" that controls what happens
when the timeout runs out which can be 0 = RESET (default),
1 = SMI, 2 = NMI, 3 = SCI.
Supports CONFIG_WATCHDOG_NOWAYOUT and the magic character
'V' close handling.
GETSUPPORT returns WDIOF_KEEPALIVEPING, and the GETSTATUS call
returns if the device is open or not. [FIXME -- silliness
again?]
mixcomwd.c -- MixCom Watchdog
[FIXME -- I'm unable to tell what the timeout is]
Supports CONFIG_WATCHDOG_NOWAYOUT
GETSUPPORT returns WDIOF_KEEPALIVEPING, GETSTATUS returns if
the device is opened or not [FIXME -- I'm not really sure how
this works, there seems to be some magic connected to
CONFIG_WATCHDOG_NOWAYOUT]
pcwd.c -- Berkshire PC Watchdog
Hardcoded timeout of 1.5 seconds
Supports CONFIG_WATCHDOG_NOWAYOUT
GETSUPPORT returns WDIOF_OVERHEAT|WDIOF_CARDRESET and both
GETSTATUS and GETBOOTSTATUS return something useful.
The SETOPTIONS call can be used to enable and disable the card
and to ask the driver to call panic if the system overheats.
sbc60xxwdt.c -- 60xx Single Board Computer
Hardcoded timeout of 10 seconds
Does not support CONFIG_WATCHDOG_NOWAYOUT, but has the magic
character 'V' close handling.
No bits set in GETSUPPORT
scx200.c -- National SCx200 CPUs
Not in the kernel yet.
The timeout is set using a module parameter "margin" which
defaults to 60 seconds. The timeout can also be set using
SETTIMEOUT and read using GETTIMEOUT.
Supports a module parameter "nowayout" that is initialized
with the value of CONFIG_WATCHDOG_NOWAYOUT. Also supports the
magic character 'V' handling.
shwdt.c -- SuperH 3/4 processors
[FIXME -- I'm unable to tell what the timeout is]
Supports CONFIG_WATCHDOG_NOWAYOUT
GETSUPPORT returns WDIOF_KEEPALIVEPING, and the GETSTATUS call
returns if the device is open or not. [FIXME -- silliness
again?]
softdog.c -- Software watchdog
The timeout is set with the module parameter "soft_margin"
which defaults to 60 seconds, the timeout is also settable
using the SETTIMEOUT ioctl.
Supports CONFIG_WATCHDOG_NOWAYOUT
WDIOF_SETTIMEOUT bit set in GETSUPPORT
w83877f_wdt.c -- W83877F Computer
Hardcoded timeout of 30 seconds
Does not support CONFIG_WATCHDOG_NOWAYOUT, but has the magic
character 'V' close handling.
No bits set in GETSUPPORT
w83627hf_wdt.c -- w83627hf watchdog
Timeout that defaults to 60 seconds, supports SETTIMEOUT.
Supports CONFIG_WATCHDOG_NOWAYOUT
GETSUPPORT returns WDIOF_KEEPALIVEPING and WDIOF_SETTIMEOUT.
The GETSTATUS call returns if the device is open or not.
wdt.c -- ICS WDT500/501 ISA and
wdt_pci.c -- ICS WDT500/501 PCI
Default timeout of 60 seconds. The timeout is also settable
using the SETTIMEOUT ioctl.
Supports CONFIG_WATCHDOG_NOWAYOUT
GETSUPPORT returns with bits set depending on the actual
card. The WDT501 supports a lot of external monitoring, the
WDT500 much less.
wdt285.c -- Footbridge watchdog
The timeout is set with the module parameter "soft_margin"
which defaults to 60 seconds. The timeout is also settable
using the SETTIMEOUT ioctl.
Does not support CONFIG_WATCHDOG_NOWAYOUT
WDIOF_SETTIMEOUT bit set in GETSUPPORT
wdt977.c -- Netwinder W83977AF chip
Hardcoded timeout of 3 minutes
Supports CONFIG_WATCHDOG_NOWAYOUT
Does not support any ioctls at all.
Reference in New Issue View Git Blame Copy Permalink