Alan Stern c73cee717e USB: EHCI: remove ehci_port_power() routine ... This patch (as1623) removes the ehci_port_power() routine and all the places that call it. There's no reason for ehci-hcd to change the port power settings; the hub driver takes care of all that stuff. There is one exception: When the controller is resumed from hibernation or following a loss of power, the ports that are supposed to be handed over to a companion controller must be powered on first. Otherwise the handover won't work. This process is not visible to the hub driver, so it has to be handled in ehci-hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>		2012-10-31 12:48:07 -07:00
..
clock.c	MIPS: ath79: Fix CPU/DDR frequency calculation for SRIF PLLs	2012-10-01 11:37:15 +02:00
common.c
common.h
dev-common.c
dev-common.h
dev-gpio-buttons.c
dev-gpio-buttons.h
dev-leds-gpio.c
dev-leds-gpio.h
dev-spi.c
dev-spi.h
dev-usb.c	USB: EHCI: remove ehci_port_power() routine	2012-10-31 12:48:07 -07:00
dev-usb.h
dev-wmac.c
dev-wmac.h
early_printk.c
gpio.c	MIPS: ath79: Fix number of GPIO lines for AR724[12]	2012-08-17 10:57:26 +02:00
irq.c
Kconfig	MIPS: ath79: add initial support for the Atheros DB120 board	2012-05-15 17:49:11 +02:00
mach-ap81.c
mach-ap121.c
mach-db120.c	MIPS: ath79: register USB host controller on the DB120 board	2012-08-28 12:29:57 +02:00
mach-pb44.c
mach-ubnt-xm.c
machtypes.h	MIPS: ath79: add initial support for the Atheros DB120 board	2012-05-15 17:49:11 +02:00
Makefile	MIPS: ath79: add initial support for the Atheros DB120 board	2012-05-15 17:49:11 +02:00
pci.c
pci.h
Platform
prom.c
setup.c