mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-22 17:33:01 +00:00
03e9bd8dbc
PMBus client driver supporting National Semiconductor LM25066, LM5064, and LM5066. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
91 lines
2.4 KiB
Plaintext
91 lines
2.4 KiB
Plaintext
Kernel driver max8688
|
|
=====================
|
|
|
|
Supported chips:
|
|
* National Semiconductor LM25066
|
|
Prefix: 'lm25066'
|
|
Addresses scanned: -
|
|
Datasheets:
|
|
http://www.national.com/pf/LM/LM25066.html
|
|
http://www.national.com/pf/LM/LM25066A.html
|
|
* National Semiconductor LM5064
|
|
Prefix: 'lm5064'
|
|
Addresses scanned: -
|
|
Datasheet:
|
|
http://www.national.com/pf/LM/LM5064.html
|
|
* National Semiconductor LM5066
|
|
Prefix: 'lm5066'
|
|
Addresses scanned: -
|
|
Datasheet:
|
|
http://www.national.com/pf/LM/LM5066.html
|
|
|
|
Author: Guenter Roeck <guenter.roeck@ericsson.com>
|
|
|
|
|
|
Description
|
|
-----------
|
|
|
|
This driver supports hardware montoring for National Semiconductor LM25066,
|
|
LM5064, and LM5064 Power Management, Monitoring, Control, and Protection ICs.
|
|
|
|
The driver is a client driver to the core PMBus driver. Please see
|
|
Documentation/hwmon/pmbus for details on PMBus client drivers.
|
|
|
|
|
|
Usage Notes
|
|
-----------
|
|
|
|
This driver does not auto-detect devices. You will have to instantiate the
|
|
devices explicitly. Please see Documentation/i2c/instantiating-devices for
|
|
details.
|
|
|
|
|
|
Platform data support
|
|
---------------------
|
|
|
|
The driver supports standard PMBus driver platform data.
|
|
|
|
|
|
Sysfs entries
|
|
-------------
|
|
|
|
The following attributes are supported. Limits are read-write; all other
|
|
attributes are read-only.
|
|
|
|
in1_label "vin"
|
|
in1_input Measured input voltage.
|
|
in1_average Average measured input voltage.
|
|
in1_min Minimum input voltage.
|
|
in1_max Maximum input voltage.
|
|
in1_min_alarm Input voltage low alarm.
|
|
in1_max_alarm Input voltage high alarm.
|
|
|
|
in2_label "vout1"
|
|
in2_input Measured output voltage.
|
|
in2_average Average measured output voltage.
|
|
in2_min Minimum output voltage.
|
|
in2_min_alarm Output voltage low alarm.
|
|
|
|
in3_label "vout2"
|
|
in3_input Measured voltage on vaux pin
|
|
|
|
curr1_label "iin"
|
|
curr1_input Measured input current.
|
|
curr1_average Average measured input current.
|
|
curr1_max Maximum input current.
|
|
curr1_max_alarm Input current high alarm.
|
|
|
|
power1_label "pin"
|
|
power1_input Measured input power.
|
|
power1_average Average measured input power.
|
|
power1_max Maximum input power limit.
|
|
power1_alarm Input power alarm
|
|
power1_input_highest Historical maximum power.
|
|
power1_reset_history Write any value to reset maximum power history.
|
|
|
|
temp1_input Measured temperature.
|
|
temp1_max Maximum temperature.
|
|
temp1_crit Critical high temperature.
|
|
temp1_max_alarm Chip temperature high alarm.
|
|
temp1_crit_alarm Chip temperature critical high alarm.
|