FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2024-12-26 03:17:48 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
ed3c138eb3
linux/drivers/regulator/ab8500.c
Lee Jones ed3c138eb3 regulator: ab8500: Correct TVOUT regulator enable time 
Update TVOUT regulator to match specification.

Was 10ms - changed to 500us.

Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Bengt JONSSON <bengt.g.jonsson@stericsson.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-01 13:23:37 +01:00

1606 lines
39 KiB
C
Raw Blame History

/*
* Copyright (C) ST-Ericsson SA 2010
*
* License Terms: GNU General Public License v2
*
* Authors: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
* Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
*
* AB8500 peripheral regulators
*
* AB8500 supports the following regulators:
* VAUX1/2/3, VINTCORE, VTVOUT, VUSB, VAUDIO, VAMIC1/2, VDMIC, VANA
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/mfd/abx500.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/of.h>
#include <linux/regulator/of_regulator.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/ab8500.h>
#include <linux/slab.h>
/**
* struct ab8500_regulator_info - ab8500 regulator information
* @dev: device pointer
* @desc: regulator description
* @regulator_dev: regulator device
* @is_enabled: status of regulator (on/off)
* @load_lp_uA: maximum load in idle (low power) mode
* @update_bank: bank to control on/off
* @update_reg: register to control on/off
* @update_mask: mask to enable/disable and set mode of regulator
* @update_val: bits holding the regulator current mode
* @update_val_idle: bits to enable the regulator in idle (low power) mode
* @update_val_normal: bits to enable the regulator in normal (high power) mode
* @voltage_bank: bank to control regulator voltage
* @voltage_reg: register to control regulator voltage
* @voltage_mask: mask to control regulator voltage
* @voltage_shift: shift to control regulator voltage
*/
struct ab8500_regulator_info {
struct device *dev;
struct regulator_desc desc;
struct regulator_dev *regulator;
bool is_enabled;
int load_lp_uA;
u8 update_bank;
u8 update_reg;
u8 update_mask;
u8 update_val;
u8 update_val_idle;
u8 update_val_normal;
u8 voltage_bank;
u8 voltage_reg;
u8 voltage_mask;
u8 voltage_shift;
};
/* voltage tables for the vauxn/vintcore supplies */
static const unsigned int ldo_vauxn_voltages[] = {
1100000,
1200000,
1300000,
1400000,
1500000,
1800000,
1850000,
1900000,
2500000,
2650000,
2700000,
2750000,
2800000,
2900000,
3000000,
3300000,
};
static const unsigned int ldo_vaux3_voltages[] = {
1200000,
1500000,
1800000,
2100000,
2500000,
2750000,
2790000,
2910000,
};
static const unsigned int ldo_vintcore_voltages[] = {
1200000,
1225000,
1250000,
1275000,
1300000,
1325000,
1350000,
};
static int ab8500_regulator_enable(struct regulator_dev *rdev)
{
int ret;
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
if (info == NULL) {
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
return -EINVAL;
}
ret = abx500_mask_and_set_register_interruptible(info->dev,
info->update_bank, info->update_reg,
info->update_mask, info->update_val);
if (ret < 0) {
dev_err(rdev_get_dev(rdev),
"couldn't set enable bits for regulator\n");
return ret;
}
info->is_enabled = true;
dev_vdbg(rdev_get_dev(rdev),
"%s-enable (bank, reg, mask, value): 0x%x, 0x%x, 0x%x, 0x%x\n",
info->desc.name, info->update_bank, info->update_reg,
info->update_mask, info->update_val);
return ret;
}
static int ab8500_regulator_disable(struct regulator_dev *rdev)
{
int ret;
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
if (info == NULL) {
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
return -EINVAL;
}
ret = abx500_mask_and_set_register_interruptible(info->dev,
info->update_bank, info->update_reg,
info->update_mask, 0x0);
if (ret < 0) {
dev_err(rdev_get_dev(rdev),
"couldn't set disable bits for regulator\n");
return ret;
}
info->is_enabled = false;
dev_vdbg(rdev_get_dev(rdev),
"%s-disable (bank, reg, mask, value): 0x%x, 0x%x, 0x%x, 0x%x\n",
info->desc.name, info->update_bank, info->update_reg,
info->update_mask, 0x0);
return ret;
}
static unsigned int ab8500_regulator_get_optimum_mode(
struct regulator_dev *rdev, int input_uV,
int output_uV, int load_uA)
{
unsigned int mode;
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
if (info == NULL) {
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
return -EINVAL;
}
if (load_uA <= info->load_lp_uA)
mode = REGULATOR_MODE_IDLE;
else
mode = REGULATOR_MODE_NORMAL;
return mode;
}
static int ab8500_regulator_set_mode(struct regulator_dev *rdev,
unsigned int mode)
{
int ret;
u8 update_val;
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
if (info == NULL) {
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
return -EINVAL;
}
switch (mode) {
case REGULATOR_MODE_NORMAL:
update_val = info->update_val_normal;
break;
case REGULATOR_MODE_IDLE:
update_val = info->update_val_idle;
break;
default:
return -EINVAL;
}
/* ab8500 regulators share mode and enable in the same register bits.
off = 0b00
low power mode= 0b11
full powermode = 0b01
(HW control mode = 0b10)
Thus we don't write to the register when regulator is disabled.
*/
if (info->is_enabled) {
ret = abx500_mask_and_set_register_interruptible(info->dev,
info->update_bank, info->update_reg,
info->update_mask, update_val);
if (ret < 0) {
dev_err(rdev_get_dev(rdev),
"couldn't set regulator mode\n");
return ret;
}
dev_vdbg(rdev_get_dev(rdev),
"%s-set_mode (bank, reg, mask, value): "
"0x%x, 0x%x, 0x%x, 0x%x\n",
info->desc.name, info->update_bank, info->update_reg,
info->update_mask, update_val);
}
info->update_val = update_val;
return 0;
}
static unsigned int ab8500_regulator_get_mode(struct regulator_dev *rdev)
{
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
int ret;
if (info == NULL) {
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
return -EINVAL;
}
if (info->update_val == info->update_val_normal)
ret = REGULATOR_MODE_NORMAL;
else if (info->update_val == info->update_val_idle)
ret = REGULATOR_MODE_IDLE;
else
ret = -EINVAL;
return ret;
}
static int ab8500_regulator_is_enabled(struct regulator_dev *rdev)
{
int ret;
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
u8 regval;
if (info == NULL) {
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
return -EINVAL;
}
ret = abx500_get_register_interruptible(info->dev,
info->update_bank, info->update_reg, &regval);
if (ret < 0) {
dev_err(rdev_get_dev(rdev),
"couldn't read 0x%x register\n", info->update_reg);
return ret;
}
dev_vdbg(rdev_get_dev(rdev),
"%s-is_enabled (bank, reg, mask, value): 0x%x, 0x%x, 0x%x,"
" 0x%x\n",
info->desc.name, info->update_bank, info->update_reg,
info->update_mask, regval);
if (regval & info->update_mask)
info->is_enabled = true;
else
info->is_enabled = false;
return info->is_enabled;
}
static int ab8500_regulator_get_voltage_sel(struct regulator_dev *rdev)
{
int ret, val;
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
u8 regval;
if (info == NULL) {
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
return -EINVAL;
}
ret = abx500_get_register_interruptible(info->dev,
info->voltage_bank, info->voltage_reg, &regval);
if (ret < 0) {
dev_err(rdev_get_dev(rdev),
"couldn't read voltage reg for regulator\n");
return ret;
}
dev_vdbg(rdev_get_dev(rdev),
"%s-get_voltage (bank, reg, mask, shift, value): "
"0x%x, 0x%x, 0x%x, 0x%x, 0x%x\n",
info->desc.name, info->voltage_bank,
info->voltage_reg, info->voltage_mask,
info->voltage_shift, regval);
val = regval & info->voltage_mask;
return val >> info->voltage_shift;
}
static int ab8500_regulator_set_voltage_sel(struct regulator_dev *rdev,
unsigned selector)
{
int ret;
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
u8 regval;
if (info == NULL) {
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
return -EINVAL;
}
/* set the registers for the request */
regval = (u8)selector << info->voltage_shift;
ret = abx500_mask_and_set_register_interruptible(info->dev,
info->voltage_bank, info->voltage_reg,
info->voltage_mask, regval);
if (ret < 0)
dev_err(rdev_get_dev(rdev),
"couldn't set voltage reg for regulator\n");
dev_vdbg(rdev_get_dev(rdev),
"%s-set_voltage (bank, reg, mask, value): 0x%x, 0x%x, 0x%x,"
" 0x%x\n",
info->desc.name, info->voltage_bank, info->voltage_reg,
info->voltage_mask, regval);
return ret;
}
static struct regulator_ops ab8500_regulator_volt_mode_ops = {
.enable = ab8500_regulator_enable,
.disable = ab8500_regulator_disable,
.is_enabled = ab8500_regulator_is_enabled,
.get_optimum_mode = ab8500_regulator_get_optimum_mode,
.set_mode = ab8500_regulator_set_mode,
.get_mode = ab8500_regulator_get_mode,
.get_voltage_sel = ab8500_regulator_get_voltage_sel,
.set_voltage_sel = ab8500_regulator_set_voltage_sel,
.list_voltage = regulator_list_voltage_table,
};
static struct regulator_ops ab8500_regulator_mode_ops = {
.enable = ab8500_regulator_enable,
.disable = ab8500_regulator_disable,
.is_enabled = ab8500_regulator_is_enabled,
.get_optimum_mode = ab8500_regulator_get_optimum_mode,
.set_mode = ab8500_regulator_set_mode,
.get_mode = ab8500_regulator_get_mode,
.get_voltage_sel = ab8500_regulator_get_voltage_sel,
.list_voltage = regulator_list_voltage_linear,
};
static struct regulator_ops ab8500_regulator_ops = {
.enable = ab8500_regulator_enable,
.disable = ab8500_regulator_disable,
.is_enabled = ab8500_regulator_is_enabled,
.get_voltage_sel = ab8500_regulator_get_voltage_sel,
.list_voltage = regulator_list_voltage_linear,
};
/* AB8500 regulator information */
static struct ab8500_regulator_info
ab8500_regulator_info[AB8500_NUM_REGULATORS] = {
/*
* Variable Voltage Regulators
* name, min mV, max mV,
* update bank, reg, mask, enable val
* volt bank, reg, mask
*/
[AB8500_LDO_AUX1] = {
.desc = {
.name = "LDO-AUX1",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8500_LDO_AUX1,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
.volt_table = ldo_vauxn_voltages,
.enable_time = 200,
},
.load_lp_uA = 5000,
.update_bank = 0x04,
.update_reg = 0x09,
.update_mask = 0x03,
.update_val = 0x01,
.update_val_idle = 0x03,
.update_val_normal = 0x01,
.voltage_bank = 0x04,
.voltage_reg = 0x1f,
.voltage_mask = 0x0f,
},
[AB8500_LDO_AUX2] = {
.desc = {
.name = "LDO-AUX2",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8500_LDO_AUX2,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
.volt_table = ldo_vauxn_voltages,
.enable_time = 200,
},
.load_lp_uA = 5000,
.update_bank = 0x04,
.update_reg = 0x09,
.update_mask = 0x0c,
.update_val = 0x04,
.update_val_idle = 0x0c,
.update_val_normal = 0x04,
.voltage_bank = 0x04,
.voltage_reg = 0x20,
.voltage_mask = 0x0f,
},
[AB8500_LDO_AUX3] = {
.desc = {
.name = "LDO-AUX3",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8500_LDO_AUX3,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vaux3_voltages),
.volt_table = ldo_vaux3_voltages,
.enable_time = 450,
},
.load_lp_uA = 5000,
.update_bank = 0x04,
.update_reg = 0x0a,
.update_mask = 0x03,
.update_val = 0x01,
.update_val_idle = 0x03,
.update_val_normal = 0x01,
.voltage_bank = 0x04,
.voltage_reg = 0x21,
.voltage_mask = 0x07,
},
[AB8500_LDO_INTCORE] = {
.desc = {
.name = "LDO-INTCORE",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8500_LDO_INTCORE,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vintcore_voltages),
.volt_table = ldo_vintcore_voltages,
.enable_time = 750,
},
.load_lp_uA = 5000,
.update_bank = 0x03,
.update_reg = 0x80,
.update_mask = 0x44,
.update_val = 0x44,
.update_val_idle = 0x44,
.update_val_normal = 0x04,
.voltage_bank = 0x03,
.voltage_reg = 0x80,
.voltage_mask = 0x38,
.voltage_shift = 3,
},
/*
* Fixed Voltage Regulators
* name, fixed mV,
* update bank, reg, mask, enable val
*/
[AB8500_LDO_TVOUT] = {
.desc = {
.name = "LDO-TVOUT",
.ops = &ab8500_regulator_mode_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8500_LDO_TVOUT,
.owner = THIS_MODULE,
.n_voltages = 1,
.min_uV = 2000000,
.enable_time = 500,
},
.load_lp_uA = 1000,
.update_bank = 0x03,
.update_reg = 0x80,
.update_mask = 0x82,
.update_val = 0x02,
.update_val_idle = 0x82,
.update_val_normal = 0x02,
},
[AB8500_LDO_AUDIO] = {
.desc = {
.name = "LDO-AUDIO",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8500_LDO_AUDIO,
.owner = THIS_MODULE,
.n_voltages = 1,
.min_uV = 2000000,
.enable_time = 140,
},
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x02,
.update_val = 0x02,
},
[AB8500_LDO_ANAMIC1] = {
.desc = {
.name = "LDO-ANAMIC1",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8500_LDO_ANAMIC1,
.owner = THIS_MODULE,
.n_voltages = 1,
.min_uV = 2050000,
.enable_time = 500,
},
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x08,
.update_val = 0x08,
},
[AB8500_LDO_ANAMIC2] = {
.desc = {
.name = "LDO-ANAMIC2",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8500_LDO_ANAMIC2,
.owner = THIS_MODULE,
.n_voltages = 1,
.min_uV = 2050000,
.enable_time = 500,
},
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x10,
.update_val = 0x10,
},
[AB8500_LDO_DMIC] = {
.desc = {
.name = "LDO-DMIC",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8500_LDO_DMIC,
.owner = THIS_MODULE,
.n_voltages = 1,
.min_uV = 1800000,
.enable_time = 420,
},
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x04,
.update_val = 0x04,
},
/*
* Regulators with fixed voltage and normal/idle modes
*/
[AB8500_LDO_ANA] = {
.desc = {
.name = "LDO-ANA",
.ops = &ab8500_regulator_mode_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8500_LDO_ANA,
.owner = THIS_MODULE,
.n_voltages = 1,
.min_uV = 1200000,
.enable_time = 140,
},
.load_lp_uA = 1000,
.update_bank = 0x04,
.update_reg = 0x06,
.update_mask = 0x0c,
.update_val = 0x04,
.update_val_idle = 0x0c,
.update_val_normal = 0x04,
},
};
/* AB9540 regulator information */
static struct ab8500_regulator_info
ab9540_regulator_info[AB9540_NUM_REGULATORS] = {
/*
* Variable Voltage Regulators
* name, min mV, max mV,
* update bank, reg, mask, enable val
* volt bank, reg, mask, table, table length
*/
[AB9540_LDO_AUX1] = {
.desc = {
.name = "LDO-AUX1",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8500_LDO_AUX1,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
},
.min_uV = 1100000,
.max_uV = 3300000,
.load_lp_uA = 5000,
.update_bank = 0x04,
.update_reg = 0x09,
.update_mask = 0x03,
.update_val = 0x01,
.update_val_idle = 0x03,
.update_val_normal = 0x01,
.voltage_bank = 0x04,
.voltage_reg = 0x1f,
.voltage_mask = 0x0f,
.voltages = ldo_vauxn_voltages,
.voltages_len = ARRAY_SIZE(ldo_vauxn_voltages),
},
[AB9540_LDO_AUX2] = {
.desc = {
.name = "LDO-AUX2",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8500_LDO_AUX2,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
},
.min_uV = 1100000,
.max_uV = 3300000,
.load_lp_uA = 5000,
.update_bank = 0x04,
.update_reg = 0x09,
.update_mask = 0x0c,
.update_val = 0x04,
.update_val_idle = 0x0c,
.update_val_normal = 0x04,
.voltage_bank = 0x04,
.voltage_reg = 0x20,
.voltage_mask = 0x0f,
.voltages = ldo_vauxn_voltages,
.voltages_len = ARRAY_SIZE(ldo_vauxn_voltages),
},
[AB9540_LDO_AUX3] = {
.desc = {
.name = "LDO-AUX3",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8500_LDO_AUX3,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vaux3_voltages),
},
.min_uV = 1100000,
.max_uV = 3300000,
.load_lp_uA = 5000,
.update_bank = 0x04,
.update_reg = 0x0a,
.update_mask = 0x03,
.update_val = 0x01,
.update_val_idle = 0x03,
.update_val_normal = 0x01,
.voltage_bank = 0x04,
.voltage_reg = 0x21,
.voltage_mask = 0x07,
.voltages = ldo_vaux3_voltages,
.voltages_len = ARRAY_SIZE(ldo_vaux3_voltages),
},
[AB9540_LDO_AUX4] = {
.desc = {
.name = "LDO-AUX4",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
.id = AB9540_LDO_AUX4,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
},
.min_uV = 1100000,
.max_uV = 3300000,
.load_lp_uA = 5000,
/* values for Vaux4Regu register */
.update_bank = 0x04,
.update_reg = 0x2e,
.update_mask = 0x03,
.update_val = 0x01,
.update_val_idle = 0x03,
.update_val_normal = 0x01,
/* values for Vaux4SEL register */
.voltage_bank = 0x04,
.voltage_reg = 0x2f,
.voltage_mask = 0x0f,
.voltages = ldo_vauxn_voltages,
.voltages_len = ARRAY_SIZE(ldo_vauxn_voltages),
},
[AB9540_LDO_INTCORE] = {
.desc = {
.name = "LDO-INTCORE",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8500_LDO_INTCORE,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vintcore_voltages),
},
.min_uV = 1100000,
.max_uV = 3300000,
.load_lp_uA = 5000,
.update_bank = 0x03,
.update_reg = 0x80,
.update_mask = 0x44,
.update_val = 0x44,
.update_val_idle = 0x44,
.update_val_normal = 0x04,
.voltage_bank = 0x03,
.voltage_reg = 0x80,
.voltage_mask = 0x38,
.voltages = ldo_vintcore_voltages,
.voltages_len = ARRAY_SIZE(ldo_vintcore_voltages),
.voltage_shift = 3,
},
/*
* Fixed Voltage Regulators
* name, fixed mV,
* update bank, reg, mask, enable val
*/
[AB9540_LDO_TVOUT] = {
.desc = {
.name = "LDO-TVOUT",
.ops = &ab8500_regulator_mode_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8500_LDO_TVOUT,
.owner = THIS_MODULE,
.n_voltages = 1,
},
.delay = 10000,
.fixed_uV = 2000000,
.load_lp_uA = 1000,
.update_bank = 0x03,
.update_reg = 0x80,
.update_mask = 0x82,
.update_val = 0x02,
.update_val_idle = 0x82,
.update_val_normal = 0x02,
},
[AB9540_LDO_USB] = {
.desc = {
.name = "LDO-USB",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
.id = AB9540_LDO_USB,
.owner = THIS_MODULE,
.n_voltages = 1,
},
.fixed_uV = 3300000,
.update_bank = 0x03,
.update_reg = 0x82,
.update_mask = 0x03,
.update_val = 0x01,
.update_val_idle = 0x03,
.update_val_normal = 0x01,
},
[AB9540_LDO_AUDIO] = {
.desc = {
.name = "LDO-AUDIO",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8500_LDO_AUDIO,
.owner = THIS_MODULE,
.n_voltages = 1,
},
.fixed_uV = 2000000,
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x02,
.update_val = 0x02,
},
[AB9540_LDO_ANAMIC1] = {
.desc = {
.name = "LDO-ANAMIC1",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8500_LDO_ANAMIC1,
.owner = THIS_MODULE,
.n_voltages = 1,
},
.fixed_uV = 2050000,
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x08,
.update_val = 0x08,
},
[AB9540_LDO_ANAMIC2] = {
.desc = {
.name = "LDO-ANAMIC2",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8500_LDO_ANAMIC2,
.owner = THIS_MODULE,
.n_voltages = 1,
},
.fixed_uV = 2050000,
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x10,
.update_val = 0x10,
},
[AB9540_LDO_DMIC] = {
.desc = {
.name = "LDO-DMIC",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8500_LDO_DMIC,
.owner = THIS_MODULE,
.n_voltages = 1,
},
.fixed_uV = 1800000,
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x04,
.update_val = 0x04,
},
/*
* Regulators with fixed voltage and normal/idle modes
*/
[AB9540_LDO_ANA] = {
.desc = {
.name = "LDO-ANA",
.ops = &ab8500_regulator_mode_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8500_LDO_ANA,
.owner = THIS_MODULE,
.n_voltages = 1,
},
.fixed_uV = 1200000,
.load_lp_uA = 1000,
.update_bank = 0x04,
.update_reg = 0x06,
.update_mask = 0x0c,
.update_val = 0x08,
.update_val_idle = 0x0c,
.update_val_normal = 0x08,
},
};
struct ab8500_reg_init {
u8 bank;
u8 addr;
u8 mask;
};
#define REG_INIT(_id, _bank, _addr, _mask) \
[_id] = { \
.bank = _bank, \
.addr = _addr, \
.mask = _mask, \
}
/* AB8500 register init */
static struct ab8500_reg_init ab8500_reg_init[] = {
/*
* 0x30, VanaRequestCtrl
* 0xc0, VextSupply1RequestCtrl
*/
REG_INIT(AB8500_REGUREQUESTCTRL2, 0x03, 0x04, 0xf0),
/*
* 0x03, VextSupply2RequestCtrl
* 0x0c, VextSupply3RequestCtrl
* 0x30, Vaux1RequestCtrl
* 0xc0, Vaux2RequestCtrl
*/
REG_INIT(AB8500_REGUREQUESTCTRL3, 0x03, 0x05, 0xff),
/*
* 0x03, Vaux3RequestCtrl
* 0x04, SwHPReq
*/
REG_INIT(AB8500_REGUREQUESTCTRL4, 0x03, 0x06, 0x07),
/*
* 0x08, VanaSysClkReq1HPValid
* 0x20, Vaux1SysClkReq1HPValid
* 0x40, Vaux2SysClkReq1HPValid
* 0x80, Vaux3SysClkReq1HPValid
*/
REG_INIT(AB8500_REGUSYSCLKREQ1HPVALID1, 0x03, 0x07, 0xe8),
/*
* 0x10, VextSupply1SysClkReq1HPValid
* 0x20, VextSupply2SysClkReq1HPValid
* 0x40, VextSupply3SysClkReq1HPValid
*/
REG_INIT(AB8500_REGUSYSCLKREQ1HPVALID2, 0x03, 0x08, 0x70),
/*
* 0x08, VanaHwHPReq1Valid
* 0x20, Vaux1HwHPReq1Valid
* 0x40, Vaux2HwHPReq1Valid
* 0x80, Vaux3HwHPReq1Valid
*/
REG_INIT(AB8500_REGUHWHPREQ1VALID1, 0x03, 0x09, 0xe8),
/*
* 0x01, VextSupply1HwHPReq1Valid
* 0x02, VextSupply2HwHPReq1Valid
* 0x04, VextSupply3HwHPReq1Valid
*/
REG_INIT(AB8500_REGUHWHPREQ1VALID2, 0x03, 0x0a, 0x07),
/*
* 0x08, VanaHwHPReq2Valid
* 0x20, Vaux1HwHPReq2Valid
* 0x40, Vaux2HwHPReq2Valid
* 0x80, Vaux3HwHPReq2Valid
*/
REG_INIT(AB8500_REGUHWHPREQ2VALID1, 0x03, 0x0b, 0xe8),
/*
* 0x01, VextSupply1HwHPReq2Valid
* 0x02, VextSupply2HwHPReq2Valid
* 0x04, VextSupply3HwHPReq2Valid
*/
REG_INIT(AB8500_REGUHWHPREQ2VALID2, 0x03, 0x0c, 0x07),
/*
* 0x20, VanaSwHPReqValid
* 0x80, Vaux1SwHPReqValid
*/
REG_INIT(AB8500_REGUSWHPREQVALID1, 0x03, 0x0d, 0xa0),
/*
* 0x01, Vaux2SwHPReqValid
* 0x02, Vaux3SwHPReqValid
* 0x04, VextSupply1SwHPReqValid
* 0x08, VextSupply2SwHPReqValid
* 0x10, VextSupply3SwHPReqValid
*/
REG_INIT(AB8500_REGUSWHPREQVALID2, 0x03, 0x0e, 0x1f),
/*
* 0x02, SysClkReq2Valid1
* 0x04, SysClkReq3Valid1
* 0x08, SysClkReq4Valid1
* 0x10, SysClkReq5Valid1
* 0x20, SysClkReq6Valid1
* 0x40, SysClkReq7Valid1
* 0x80, SysClkReq8Valid1
*/
REG_INIT(AB8500_REGUSYSCLKREQVALID1, 0x03, 0x0f, 0xfe),
/*
* 0x02, SysClkReq2Valid2
* 0x04, SysClkReq3Valid2
* 0x08, SysClkReq4Valid2
* 0x10, SysClkReq5Valid2
* 0x20, SysClkReq6Valid2
* 0x40, SysClkReq7Valid2
* 0x80, SysClkReq8Valid2
*/
REG_INIT(AB8500_REGUSYSCLKREQVALID2, 0x03, 0x10, 0xfe),
/*
* 0x02, VTVoutEna
* 0x04, Vintcore12Ena
* 0x38, Vintcore12Sel
* 0x40, Vintcore12LP
* 0x80, VTVoutLP
*/
REG_INIT(AB8500_REGUMISC1, 0x03, 0x80, 0xfe),
/*
* 0x02, VaudioEna
* 0x04, VdmicEna
* 0x08, Vamic1Ena
* 0x10, Vamic2Ena
*/
REG_INIT(AB8500_VAUDIOSUPPLY, 0x03, 0x83, 0x1e),
/*
* 0x01, Vamic1_dzout
* 0x02, Vamic2_dzout
*/
REG_INIT(AB8500_REGUCTRL1VAMIC, 0x03, 0x84, 0x03),
/*
* 0x03, VpllRegu (NOTE! PRCMU register bits)
* 0x0c, VanaRegu
*/
REG_INIT(AB8500_VPLLVANAREGU, 0x04, 0x06, 0x0f),
/*
* 0x01, VrefDDREna
* 0x02, VrefDDRSleepMode
*/
REG_INIT(AB8500_VREFDDR, 0x04, 0x07, 0x03),
/*
* 0x03, VextSupply1Regu
* 0x0c, VextSupply2Regu
* 0x30, VextSupply3Regu
* 0x40, ExtSupply2Bypass
* 0x80, ExtSupply3Bypass
*/
REG_INIT(AB8500_EXTSUPPLYREGU, 0x04, 0x08, 0xff),
/*
* 0x03, Vaux1Regu
* 0x0c, Vaux2Regu
*/
REG_INIT(AB8500_VAUX12REGU, 0x04, 0x09, 0x0f),
/*
* 0x03, Vaux3Regu
*/
REG_INIT(AB8500_VRF1VAUX3REGU, 0x04, 0x0a, 0x03),
/*
* 0x0f, Vaux1Sel
*/
REG_INIT(AB8500_VAUX1SEL, 0x04, 0x1f, 0x0f),
/*
* 0x0f, Vaux2Sel
*/
REG_INIT(AB8500_VAUX2SEL, 0x04, 0x20, 0x0f),
/*
* 0x07, Vaux3Sel
*/
REG_INIT(AB8500_VRF1VAUX3SEL, 0x04, 0x21, 0x07),
/*
* 0x01, VextSupply12LP
*/
REG_INIT(AB8500_REGUCTRL2SPARE, 0x04, 0x22, 0x01),
/*
* 0x04, Vaux1Disch
* 0x08, Vaux2Disch
* 0x10, Vaux3Disch
* 0x20, Vintcore12Disch
* 0x40, VTVoutDisch
* 0x80, VaudioDisch
*/
REG_INIT(AB8500_REGUCTRLDISCH, 0x04, 0x43, 0xfc),
/*
* 0x02, VanaDisch
* 0x04, VdmicPullDownEna
* 0x10, VdmicDisch
*/
REG_INIT(AB8500_REGUCTRLDISCH2, 0x04, 0x44, 0x16),
};
/* AB9540 register init */
static struct ab8500_reg_init ab9540_reg_init[] = {
/*
* 0x03, VarmRequestCtrl
* 0x0c, VapeRequestCtrl
* 0x30, Vsmps1RequestCtrl
* 0xc0, Vsmps2RequestCtrl
*/
REG_INIT(AB9540_REGUREQUESTCTRL1, 0x03, 0x03, 0xff),
/*
* 0x03, Vsmps3RequestCtrl
* 0x0c, VpllRequestCtrl
* 0x30, VanaRequestCtrl
* 0xc0, VextSupply1RequestCtrl
*/
REG_INIT(AB9540_REGUREQUESTCTRL2, 0x03, 0x04, 0xff),
/*
* 0x03, VextSupply2RequestCtrl
* 0x0c, VextSupply3RequestCtrl
* 0x30, Vaux1RequestCtrl
* 0xc0, Vaux2RequestCtrl
*/
REG_INIT(AB9540_REGUREQUESTCTRL3, 0x03, 0x05, 0xff),
/*
* 0x03, Vaux3RequestCtrl
* 0x04, SwHPReq
*/
REG_INIT(AB9540_REGUREQUESTCTRL4, 0x03, 0x06, 0x07),
/*
* 0x01, Vsmps1SysClkReq1HPValid
* 0x02, Vsmps2SysClkReq1HPValid
* 0x04, Vsmps3SysClkReq1HPValid
* 0x08, VanaSysClkReq1HPValid
* 0x10, VpllSysClkReq1HPValid
* 0x20, Vaux1SysClkReq1HPValid
* 0x40, Vaux2SysClkReq1HPValid
* 0x80, Vaux3SysClkReq1HPValid
*/
REG_INIT(AB9540_REGUSYSCLKREQ1HPVALID1, 0x03, 0x07, 0xff),
/*
* 0x01, VapeSysClkReq1HPValid
* 0x02, VarmSysClkReq1HPValid
* 0x04, VbbSysClkReq1HPValid
* 0x08, VmodSysClkReq1HPValid
* 0x10, VextSupply1SysClkReq1HPValid
* 0x20, VextSupply2SysClkReq1HPValid
* 0x40, VextSupply3SysClkReq1HPValid
*/
REG_INIT(AB9540_REGUSYSCLKREQ1HPVALID2, 0x03, 0x08, 0x7f),
/*
* 0x01, Vsmps1HwHPReq1Valid
* 0x02, Vsmps2HwHPReq1Valid
* 0x04, Vsmps3HwHPReq1Valid
* 0x08, VanaHwHPReq1Valid
* 0x10, VpllHwHPReq1Valid
* 0x20, Vaux1HwHPReq1Valid
* 0x40, Vaux2HwHPReq1Valid
* 0x80, Vaux3HwHPReq1Valid
*/
REG_INIT(AB9540_REGUHWHPREQ1VALID1, 0x03, 0x09, 0xff),
/*
* 0x01, VextSupply1HwHPReq1Valid
* 0x02, VextSupply2HwHPReq1Valid
* 0x04, VextSupply3HwHPReq1Valid
* 0x08, VmodHwHPReq1Valid
*/
REG_INIT(AB9540_REGUHWHPREQ1VALID2, 0x03, 0x0a, 0x0f),
/*
* 0x01, Vsmps1HwHPReq2Valid
* 0x02, Vsmps2HwHPReq2Valid
* 0x03, Vsmps3HwHPReq2Valid
* 0x08, VanaHwHPReq2Valid
* 0x10, VpllHwHPReq2Valid
* 0x20, Vaux1HwHPReq2Valid
* 0x40, Vaux2HwHPReq2Valid
* 0x80, Vaux3HwHPReq2Valid
*/
REG_INIT(AB9540_REGUHWHPREQ2VALID1, 0x03, 0x0b, 0xff),
/*
* 0x01, VextSupply1HwHPReq2Valid
* 0x02, VextSupply2HwHPReq2Valid
* 0x04, VextSupply3HwHPReq2Valid
* 0x08, VmodHwHPReq2Valid
*/
REG_INIT(AB9540_REGUHWHPREQ2VALID2, 0x03, 0x0c, 0x0f),
/*
* 0x01, VapeSwHPReqValid
* 0x02, VarmSwHPReqValid
* 0x04, Vsmps1SwHPReqValid
* 0x08, Vsmps2SwHPReqValid
* 0x10, Vsmps3SwHPReqValid
* 0x20, VanaSwHPReqValid
* 0x40, VpllSwHPReqValid
* 0x80, Vaux1SwHPReqValid
*/
REG_INIT(AB9540_REGUSWHPREQVALID1, 0x03, 0x0d, 0xff),
/*
* 0x01, Vaux2SwHPReqValid
* 0x02, Vaux3SwHPReqValid
* 0x04, VextSupply1SwHPReqValid
* 0x08, VextSupply2SwHPReqValid
* 0x10, VextSupply3SwHPReqValid
* 0x20, VmodSwHPReqValid
*/
REG_INIT(AB9540_REGUSWHPREQVALID2, 0x03, 0x0e, 0x3f),
/*
* 0x02, SysClkReq2Valid1
* ...
* 0x80, SysClkReq8Valid1
*/
REG_INIT(AB9540_REGUSYSCLKREQVALID1, 0x03, 0x0f, 0xfe),
/*
* 0x02, SysClkReq2Valid2
* ...
* 0x80, SysClkReq8Valid2
*/
REG_INIT(AB9540_REGUSYSCLKREQVALID2, 0x03, 0x10, 0xfe),
/*
* 0x01, Vaux4SwHPReqValid
* 0x02, Vaux4HwHPReq2Valid
* 0x04, Vaux4HwHPReq1Valid
* 0x08, Vaux4SysClkReq1HPValid
*/
REG_INIT(AB9540_REGUVAUX4REQVALID, 0x03, 0x11, 0x0f),
/*
* 0x02, VTVoutEna
* 0x04, Vintcore12Ena
* 0x38, Vintcore12Sel
* 0x40, Vintcore12LP
* 0x80, VTVoutLP
*/
REG_INIT(AB9540_REGUMISC1, 0x03, 0x80, 0xfe),
/*
* 0x02, VaudioEna
* 0x04, VdmicEna
* 0x08, Vamic1Ena
* 0x10, Vamic2Ena
*/
REG_INIT(AB9540_VAUDIOSUPPLY, 0x03, 0x83, 0x1e),
/*
* 0x01, Vamic1_dzout
* 0x02, Vamic2_dzout
*/
REG_INIT(AB9540_REGUCTRL1VAMIC, 0x03, 0x84, 0x03),
/*
* 0x03, Vsmps1Regu
* 0x0c, Vsmps1SelCtrl
* 0x10, Vsmps1AutoMode
* 0x20, Vsmps1PWMMode
*/
REG_INIT(AB9540_VSMPS1REGU, 0x04, 0x03, 0x3f),
/*
* 0x03, Vsmps2Regu
* 0x0c, Vsmps2SelCtrl
* 0x10, Vsmps2AutoMode
* 0x20, Vsmps2PWMMode
*/
REG_INIT(AB9540_VSMPS2REGU, 0x04, 0x04, 0x3f),
/*
* 0x03, Vsmps3Regu
* 0x0c, Vsmps3SelCtrl
* NOTE! PRCMU register
*/
REG_INIT(AB9540_VSMPS3REGU, 0x04, 0x05, 0x0f),
/*
* 0x03, VpllRegu
* 0x0c, VanaRegu
*/
REG_INIT(AB9540_VPLLVANAREGU, 0x04, 0x06, 0x0f),
/*
* 0x03, VextSupply1Regu
* 0x0c, VextSupply2Regu
* 0x30, VextSupply3Regu
* 0x40, ExtSupply2Bypass
* 0x80, ExtSupply3Bypass
*/
REG_INIT(AB9540_EXTSUPPLYREGU, 0x04, 0x08, 0xff),
/*
* 0x03, Vaux1Regu
* 0x0c, Vaux2Regu
*/
REG_INIT(AB9540_VAUX12REGU, 0x04, 0x09, 0x0f),
/*
* 0x0c, Vrf1Regu
* 0x03, Vaux3Regu
*/
REG_INIT(AB9540_VRF1VAUX3REGU, 0x04, 0x0a, 0x0f),
/*
* 0x3f, Vsmps1Sel1
*/
REG_INIT(AB9540_VSMPS1SEL1, 0x04, 0x13, 0x3f),
/*
* 0x3f, Vsmps1Sel2
*/
REG_INIT(AB9540_VSMPS1SEL2, 0x04, 0x14, 0x3f),
/*
* 0x3f, Vsmps1Sel3
*/
REG_INIT(AB9540_VSMPS1SEL3, 0x04, 0x15, 0x3f),
/*
* 0x3f, Vsmps2Sel1
*/
REG_INIT(AB9540_VSMPS2SEL1, 0x04, 0x17, 0x3f),
/*
* 0x3f, Vsmps2Sel2
*/
REG_INIT(AB9540_VSMPS2SEL2, 0x04, 0x18, 0x3f),
/*
* 0x3f, Vsmps2Sel3
*/
REG_INIT(AB9540_VSMPS2SEL3, 0x04, 0x19, 0x3f),
/*
* 0x7f, Vsmps3Sel1
* NOTE! PRCMU register
*/
REG_INIT(AB9540_VSMPS3SEL1, 0x04, 0x1b, 0x7f),
/*
* 0x7f, Vsmps3Sel2
* NOTE! PRCMU register
*/
REG_INIT(AB9540_VSMPS3SEL2, 0x04, 0x1c, 0x7f),
/*
* 0x0f, Vaux1Sel
*/
REG_INIT(AB9540_VAUX1SEL, 0x04, 0x1f, 0x0f),
/*
* 0x0f, Vaux2Sel
*/
REG_INIT(AB9540_VAUX2SEL, 0x04, 0x20, 0x0f),
/*
* 0x07, Vaux3Sel
* 0x30, Vrf1Sel
*/
REG_INIT(AB9540_VRF1VAUX3SEL, 0x04, 0x21, 0x37),
/*
* 0x01, VextSupply12LP
*/
REG_INIT(AB9540_REGUCTRL2SPARE, 0x04, 0x22, 0x01),
/*
* 0x03, Vaux4RequestCtrl
*/
REG_INIT(AB9540_VAUX4REQCTRL, 0x04, 0x2d, 0x03),
/*
* 0x03, Vaux4Regu
*/
REG_INIT(AB9540_VAUX4REGU, 0x04, 0x2e, 0x03),
/*
* 0x08, Vaux4Sel
*/
REG_INIT(AB9540_VAUX4SEL, 0x04, 0x2f, 0x0f),
/*
* 0x01, VpllDisch
* 0x02, Vrf1Disch
* 0x04, Vaux1Disch
* 0x08, Vaux2Disch
* 0x10, Vaux3Disch
* 0x20, Vintcore12Disch
* 0x40, VTVoutDisch
* 0x80, VaudioDisch
*/
REG_INIT(AB9540_REGUCTRLDISCH, 0x04, 0x43, 0xff),
/*
* 0x01, VsimDisch
* 0x02, VanaDisch
* 0x04, VdmicPullDownEna
* 0x08, VpllPullDownEna
* 0x10, VdmicDisch
*/
REG_INIT(AB9540_REGUCTRLDISCH2, 0x04, 0x44, 0x1f),
/*
* 0x01, Vaux4Disch
*/
REG_INIT(AB9540_REGUCTRLDISCH3, 0x04, 0x48, 0x01),
};
static int ab8500_regulator_init_registers(struct platform_device *pdev,
struct ab8500_reg_init *reg_init,
int id, int mask, int value)
{
int err;
BUG_ON(value & ~mask);
BUG_ON(mask & ~reg_init[id].mask);
/* initialize register */
err = abx500_mask_and_set_register_interruptible(
&pdev->dev,
reg_init[id].bank,
reg_init[id].addr,
mask, value);
if (err < 0) {
dev_err(&pdev->dev,
"Failed to initialize 0x%02x, 0x%02x.\n",
reg_init[id].bank,
reg_init[id].addr);
return err;
}
dev_vdbg(&pdev->dev,
" init: 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
reg_init[id].bank,
reg_init[id].addr,
mask, value);
return 0;
}
static int ab8500_regulator_register(struct platform_device *pdev,
struct regulator_init_data *init_data,
struct ab8500_regulator_info *regulator_info,
int id, struct device_node *np)
{
struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
struct ab8500_regulator_info *info = NULL;
struct regulator_config config = { };
int err;
/* assign per-regulator data */
info = &regulator_info[id];
info->dev = &pdev->dev;
config.dev = &pdev->dev;
config.init_data = init_data;
config.driver_data = info;
config.of_node = np;
/* fix for hardware before ab8500v2.0 */
if (is_ab8500_1p1_or_earlier(ab8500)) {
if (info->desc.id == AB8500_LDO_AUX3) {
info->desc.n_voltages =
ARRAY_SIZE(ldo_vauxn_voltages);
info->desc.volt_table = ldo_vauxn_voltages;
info->voltage_mask = 0xf;
}
}
/* register regulator with framework */
info->regulator = regulator_register(&info->desc, &config);
if (IS_ERR(info->regulator)) {
err = PTR_ERR(info->regulator);
dev_err(&pdev->dev, "failed to register regulator %s\n",
info->desc.name);
/* when we fail, un-register all earlier regulators */
while (--id >= 0) {
info = &regulator_info[id];
regulator_unregister(info->regulator);
}
return err;
}
return 0;
}
static struct of_regulator_match ab8500_regulator_match[] = {
{ .name = "ab8500_ldo_aux1", .driver_data = (void *) AB8500_LDO_AUX1, },
{ .name = "ab8500_ldo_aux2", .driver_data = (void *) AB8500_LDO_AUX2, },
{ .name = "ab8500_ldo_aux3", .driver_data = (void *) AB8500_LDO_AUX3, },
{ .name = "ab8500_ldo_intcore", .driver_data = (void *) AB8500_LDO_INTCORE, },
{ .name = "ab8500_ldo_tvout", .driver_data = (void *) AB8500_LDO_TVOUT, },
{ .name = "ab8500_ldo_audio", .driver_data = (void *) AB8500_LDO_AUDIO, },
{ .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB8500_LDO_ANAMIC1, },
{ .name = "ab8500_ldo_amamic2", .driver_data = (void *) AB8500_LDO_ANAMIC2, },
{ .name = "ab8500_ldo_dmic", .driver_data = (void *) AB8500_LDO_DMIC, },
{ .name = "ab8500_ldo_ana", .driver_data = (void *) AB8500_LDO_ANA, },
};
static struct of_regulator_match ab9540_regulator_match[] = {
{ .name = "ab8500_ldo_aux1", .driver_data = (void *) AB9540_LDO_AUX1, },
{ .name = "ab8500_ldo_aux2", .driver_data = (void *) AB9540_LDO_AUX2, },
{ .name = "ab8500_ldo_aux3", .driver_data = (void *) AB9540_LDO_AUX3, },
{ .name = "ab8500_ldo_aux4", .driver_data = (void *) AB9540_LDO_AUX4, },
{ .name = "ab8500_ldo_intcore", .driver_data = (void *) AB9540_LDO_INTCORE, },
{ .name = "ab8500_ldo_tvout", .driver_data = (void *) AB9540_LDO_TVOUT, },
{ .name = "ab8500_ldo_audio", .driver_data = (void *) AB9540_LDO_AUDIO, },
{ .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB9540_LDO_ANAMIC1, },
{ .name = "ab8500_ldo_amamic2", .driver_data = (void *) AB9540_LDO_ANAMIC2, },
{ .name = "ab8500_ldo_dmic", .driver_data = (void *) AB9540_LDO_DMIC, },
{ .name = "ab8500_ldo_ana", .driver_data = (void *) AB9540_LDO_ANA, },
};
static int
ab8500_regulator_of_probe(struct platform_device *pdev,
struct ab8500_regulator_info *regulator_info,
int regulator_info_size,
struct of_regulator_match *match,
struct device_node *np)
{
int err, i;
for (i = 0; i < regulator_info_size; i++) {
err = ab8500_regulator_register(
pdev, match[i].init_data, regulator_info,
i, match[i].of_node);
if (err)
return err;
}
return 0;
}
static int ab8500_regulator_probe(struct platform_device *pdev)
{
struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
struct device_node *np = pdev->dev.of_node;
struct of_regulator_match *match;
struct ab8500_platform_data *ppdata;
struct ab8500_regulator_platform_data *pdata;
int i, err;
struct ab8500_regulator_info *regulator_info;
int regulator_info_size;
struct ab8500_reg_init *reg_init;
int reg_init_size;
if (is_ab9540(ab8500)) {
regulator_info = ab9540_regulator_info;
regulator_info_size = ARRAY_SIZE(ab9540_regulator_info);
reg_init = ab9540_reg_init;
reg_init_size = AB9540_NUM_REGULATOR_REGISTERS;
match = ab9540_regulator_match;
match_size = ARRAY_SIZE(ab9540_regulator_match)
} else {
regulator_info = ab8500_regulator_info;
regulator_info_size = ARRAY_SIZE(ab8500_regulator_info);
reg_init = ab8500_reg_init;
reg_init_size = AB8500_NUM_REGULATOR_REGISTERS;
match = ab8500_regulator_match;
match_size = ARRAY_SIZE(ab8500_regulator_match)
}
if (np) {
err = of_regulator_match(&pdev->dev, np, match, match_size);
if (err < 0) {
dev_err(&pdev->dev,
"Error parsing regulator init data: %d\n", err);
return err;
}
err = ab8500_regulator_of_probe(pdev, regulator_info,
regulator_info_size, match, np);
return err;
}
if (!ab8500) {
dev_err(&pdev->dev, "null mfd parent\n");
return -EINVAL;
}
ppdata = dev_get_platdata(ab8500->dev);
if (!ppdata) {
dev_err(&pdev->dev, "null parent pdata\n");
return -EINVAL;
}
pdata = ppdata->regulator;
if (!pdata) {
dev_err(&pdev->dev, "null pdata\n");
return -EINVAL;
}
/* make sure the platform data has the correct size */
if (pdata->num_regulator != regulator_info_size) {
dev_err(&pdev->dev, "Configuration error: size mismatch.\n");
return -EINVAL;
}
/* initialize debug (initial state is recorded with this call) */
err = ab8500_regulator_debug_init(pdev);
if (err)
return err;
/* initialize registers */
for (i = 0; i < pdata->num_reg_init; i++) {
int id, mask, value;
id = pdata->reg_init[i].id;
mask = pdata->reg_init[i].mask;
value = pdata->reg_init[i].value;
/* check for configuration errors */
BUG_ON(id >= AB8500_NUM_REGULATOR_REGISTERS);
err = ab8500_regulator_init_registers(pdev, reg_init, id, mask, value);
if (err < 0)
return err;
}
/* register external regulators (before Vaux1, 2 and 3) */
err = ab8500_ext_regulator_init(pdev);
if (err)
return err;
/* register all regulators */
for (i = 0; i < regulator_info_size; i++) {
err = ab8500_regulator_register(pdev, &pdata->regulator[i],
regulator_info, i, NULL);
if (err < 0)
return err;
}
return 0;
}
static int ab8500_regulator_remove(struct platform_device *pdev)
{
int i, err;
struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
struct ab8500_regulator_info *regulator_info;
int regulator_info_size;
if (is_ab9540(ab8500)) {
regulator_info = ab9540_regulator_info;
regulator_info_size = ARRAY_SIZE(ab9540_regulator_info);
} else {
regulator_info = ab8500_regulator_info;
regulator_info_size = ARRAY_SIZE(ab8500_regulator_info);
}
for (i = 0; i < regulator_info_size; i++) {
struct ab8500_regulator_info *info = NULL;
info = &regulator_info[i];
dev_vdbg(rdev_get_dev(info->regulator),
"%s-remove\n", info->desc.name);
regulator_unregister(info->regulator);
}
/* remove external regulators (after Vaux1, 2 and 3) */
err = ab8500_ext_regulator_exit(pdev);
if (err)
return err;
/* remove regulator debug */
err = ab8500_regulator_debug_exit(pdev);
if (err)
return err;
return 0;
}
static struct platform_driver ab8500_regulator_driver = {
.probe = ab8500_regulator_probe,
.remove = ab8500_regulator_remove,
.driver = {
.name = "ab8500-regulator",
.owner = THIS_MODULE,
},
};
static int __init ab8500_regulator_init(void)
{
int ret;
ret = platform_driver_register(&ab8500_regulator_driver);
if (ret != 0)
pr_err("Failed to register ab8500 regulator: %d\n", ret);
return ret;
}
subsys_initcall(ab8500_regulator_init);
static void __exit ab8500_regulator_exit(void)
{
platform_driver_unregister(&ab8500_regulator_driver);
}
module_exit(ab8500_regulator_exit);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Sundar Iyer <sundar.iyer@stericsson.com>");
MODULE_AUTHOR("Bengt Jonsson <bengt.g.jonsson@stericsson.com>");
MODULE_DESCRIPTION("Regulator Driver for ST-Ericsson AB8500 Mixed-Sig PMIC");
MODULE_ALIAS("platform:ab8500-regulator");
Reference in New Issue View Git Blame Copy Permalink