linux/drivers/serial
Linus Torvalds d973664992 Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm: (26 commits)
  [ARM] pxa: fix 1c104e0e4f
  [ARM] serial: s3c2410: platform_get_irq() may return signed unnoticed
  [ARM] am79c961a: platform_get_irq() may return signed unnoticed
  [ARM] Feroceon: Feroceon-specific WA-cache compatible {copy,clear}_user_page()
  [ARM] Feroceon: fix function alignment in proc-feroceon.S
  [ARM] Orion: catch a couple more alternative spellings of PCIe
  [ARM] Orion: fix orion-ehci platform resource end addresses
  [ARM] Orion: fix ->map_irq() PCIe bus number check
  [ARM] Orion: fix ioremap() optimization
  [ARM] feroceon: remove CONFIG_CPU_CACHE_ROUND_ROBIN check
  [ARM] feroceon: remove CONFIG_CPU_DCACHE_WRITETHROUGH check
  kprobes/arm: fix decoding of arithmetic immediate instructions
  kprobes/arm: fix cache flush address for instruction stub
  [ARM] 5022/1: Race in ARM MMCI PL18x driver, V2
  [ARM] 5021/1: at91: buildfix for sam9263 + PM
  [ARM] 5018/1: RealView: Fix the ARM11MPCore Oprofile compilation
  [ARM] 5016/1: AT91: typo in mci configuration for at91cap at91sam9263
  [ARM] 5017/1: pxa3xx: Report unsupported wakeup sources in pxa3xx_set_wake()
  [ARM] 5020/1: magician: remove __devinit marker from pasic3_leds_info
  [ARM] 5014/1: Cleanup reset state before entering suspend or resetting.
  ...
2008-04-29 15:18:06 -07:00
..
cpm_uart [POWERPC] cpm_uart: Allocate DPRAM memory for SMC ports on CPM2-based platforms. 2008-04-17 01:01:36 -05:00
jsm
8250_accent.c
8250_acorn.c
8250_boca.c
8250_early.c 8250_early: coding style 2008-02-08 09:22:25 -08:00
8250_exar_st16c554.c
8250_fourport.c
8250_gsc.c 8250_gsc: coding style 2008-02-08 09:22:25 -08:00
8250_hp300.c 8250_hp300: coding style 2008-02-08 09:22:25 -08:00
8250_hub6.c 8250_hub6: codding style 2008-02-08 09:22:25 -08:00
8250_mca.c
8250_pci.c serial: silence section mismatch warnings in 8250_pci 2008-04-28 08:58:29 -07:00
8250_pnp.c serial: add PNP ID GVC0303 for Archtek 3334BRV ISA modem 2008-03-04 16:35:09 -08:00
8250.c serial 8250: tighten test for using backup timer 2008-04-28 08:58:30 -07:00
8250.h
21285.c
68328serial.c Char: char/serial, remove SERIAL_TYPE_NORMAL redefines 2008-02-07 08:42:33 -08:00
68328serial.h
68360serial.c serial: use time_before, time_before_eq, etc 2008-04-28 08:58:30 -07:00
amba-pl010.c
amba-pl011.c kgdb: kgdboc pl011 I/O module 2008-04-17 20:05:39 +02:00
atmel_serial.c atmel_serial: remove duplicated macro definition 2008-04-28 08:58:30 -07:00
bfin_5xx.c Blackfin Serial Driver: fix bug - use mod_timer to replace only add_timer. 2008-04-25 04:36:47 +08:00
clps711x.c
crisv10.c crisv10: prepare for BKL push down 2008-04-28 08:58:28 -07:00
crisv10.h
dz.c dz: test after postfix decrement fails in dz_console_putchar() 2008-04-28 08:58:16 -07:00
dz.h dz: clean up and improve the setup of termios settings 2008-02-07 08:42:24 -08:00
icom.c
icom.h
imx.c Merge branch 'merge-fixes' into devel 2008-04-19 17:17:34 +01:00
ioc3_serial.c
ioc4_serial.c
ip22zilog.c
ip22zilog.h
Kconfig [MIPS] Alchemy: move UART platform code to its proper place 2008-04-28 17:14:28 +01:00
kgdboc.c kgdb: fix kgdboc dynamic module configuration 2008-04-17 20:05:38 +02:00
m32r_sio_reg.h
m32r_sio.c drivers/serial/m32r_sio.c: correct use of ! and & 2008-03-04 16:35:16 -08:00
m32r_sio.h
Makefile [MIPS] Alchemy: move UART platform code to its proper place 2008-04-28 17:14:28 +01:00
mcf.c serial: fix platform driver hotplug/coldplug 2008-04-15 19:35:40 -07:00
mcfserial.c drivers: Remove unnecessary inclusions of asm/semaphore.h 2008-04-18 22:16:32 -04:00
mcfserial.h
mpc52xx_uart.c serial: fix platform driver hotplug/coldplug 2008-04-15 19:35:40 -07:00
mpsc.c serial: fix platform driver hotplug/coldplug 2008-04-15 19:35:40 -07:00
mux.c
netx-serial.c serial: fix platform driver hotplug/coldplug 2008-04-15 19:35:40 -07:00
of_serial.c [POWERPC] Xilinx: of_serial support for Xilinx uart 16550. 2008-04-24 13:32:46 -05:00
pmac_zilog.c
pmac_zilog.h
pnx8xxx_uart.c serial: fix platform driver hotplug/coldplug 2008-04-15 19:35:40 -07:00
pxa.c serial: fix platform driver hotplug/coldplug 2008-04-15 19:35:40 -07:00
s3c2410.c [ARM] serial: s3c2410: platform_get_irq() may return signed unnoticed 2008-04-28 21:24:45 +01:00
sa1100.c serial: fix platform driver hotplug/coldplug 2008-04-15 19:35:40 -07:00
sb1250-duart.c
sc26xx.c serial: fix platform driver hotplug/coldplug 2008-04-15 19:35:40 -07:00
serial_core.c uart_get_baud_rate: stop mangling termios 2008-04-28 08:58:30 -07:00
serial_cs.c
serial_ks8695.c
serial_lh7a40x.c
serial_txx9.c
sh-sci.c sh: Add support for SH7723 CPU subtype. 2008-04-18 09:50:07 -07:00
sh-sci.h sh: Add support for SH7723 CPU subtype. 2008-04-18 09:50:07 -07:00
sn_console.c
suncore.c
suncore.h
sunhv.c
sunsab.c
sunsab.h
sunsu.c
sunzilog.c sparc: sunzilog.c remove unused argument 2008-04-26 23:10:19 -07:00
sunzilog.h
uartlite.c serial: fix platform driver hotplug/coldplug 2008-04-15 19:35:40 -07:00
ucc_uart.c [POWERPC] QE: UCC nodes cleanup 2008-04-17 01:01:38 -05:00
v850e_uart.c
vr41xx_siu.c serial: add vr41xx_siu_early_setup() for serial console 2008-04-28 08:58:30 -07:00
zs.c
zs.h