mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-22 17:33:01 +00:00
2caeac8104
I2C adapter drivers are supposed to handle retries on nack by themselves if they do, so there's no point in setting .retries if they don't. As this retry mechanism is going away (at least in its current form), clean this up now so that we don't get build failures later. Signed-off-by: Jean Delvare <khali@linux-fr.org>
586 lines
15 KiB
C
586 lines
15 KiB
C
/*
|
|
* TI DAVINCI I2C adapter driver.
|
|
*
|
|
* Copyright (C) 2006 Texas Instruments.
|
|
* Copyright (C) 2007 MontaVista Software Inc.
|
|
*
|
|
* Updated by Vinod & Sudhakar Feb 2005
|
|
*
|
|
* ----------------------------------------------------------------------------
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
* ----------------------------------------------------------------------------
|
|
*
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/err.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <asm/hardware.h>
|
|
#include <asm/mach-types.h>
|
|
|
|
#include <asm/arch/i2c.h>
|
|
|
|
/* ----- global defines ----------------------------------------------- */
|
|
|
|
#define DAVINCI_I2C_TIMEOUT (1*HZ)
|
|
#define I2C_DAVINCI_INTR_ALL (DAVINCI_I2C_IMR_AAS | \
|
|
DAVINCI_I2C_IMR_SCD | \
|
|
DAVINCI_I2C_IMR_ARDY | \
|
|
DAVINCI_I2C_IMR_NACK | \
|
|
DAVINCI_I2C_IMR_AL)
|
|
|
|
#define DAVINCI_I2C_OAR_REG 0x00
|
|
#define DAVINCI_I2C_IMR_REG 0x04
|
|
#define DAVINCI_I2C_STR_REG 0x08
|
|
#define DAVINCI_I2C_CLKL_REG 0x0c
|
|
#define DAVINCI_I2C_CLKH_REG 0x10
|
|
#define DAVINCI_I2C_CNT_REG 0x14
|
|
#define DAVINCI_I2C_DRR_REG 0x18
|
|
#define DAVINCI_I2C_SAR_REG 0x1c
|
|
#define DAVINCI_I2C_DXR_REG 0x20
|
|
#define DAVINCI_I2C_MDR_REG 0x24
|
|
#define DAVINCI_I2C_IVR_REG 0x28
|
|
#define DAVINCI_I2C_EMDR_REG 0x2c
|
|
#define DAVINCI_I2C_PSC_REG 0x30
|
|
|
|
#define DAVINCI_I2C_IVR_AAS 0x07
|
|
#define DAVINCI_I2C_IVR_SCD 0x06
|
|
#define DAVINCI_I2C_IVR_XRDY 0x05
|
|
#define DAVINCI_I2C_IVR_RDR 0x04
|
|
#define DAVINCI_I2C_IVR_ARDY 0x03
|
|
#define DAVINCI_I2C_IVR_NACK 0x02
|
|
#define DAVINCI_I2C_IVR_AL 0x01
|
|
|
|
#define DAVINCI_I2C_STR_BB (1 << 12)
|
|
#define DAVINCI_I2C_STR_RSFULL (1 << 11)
|
|
#define DAVINCI_I2C_STR_SCD (1 << 5)
|
|
#define DAVINCI_I2C_STR_ARDY (1 << 2)
|
|
#define DAVINCI_I2C_STR_NACK (1 << 1)
|
|
#define DAVINCI_I2C_STR_AL (1 << 0)
|
|
|
|
#define DAVINCI_I2C_MDR_NACK (1 << 15)
|
|
#define DAVINCI_I2C_MDR_STT (1 << 13)
|
|
#define DAVINCI_I2C_MDR_STP (1 << 11)
|
|
#define DAVINCI_I2C_MDR_MST (1 << 10)
|
|
#define DAVINCI_I2C_MDR_TRX (1 << 9)
|
|
#define DAVINCI_I2C_MDR_XA (1 << 8)
|
|
#define DAVINCI_I2C_MDR_IRS (1 << 5)
|
|
|
|
#define DAVINCI_I2C_IMR_AAS (1 << 6)
|
|
#define DAVINCI_I2C_IMR_SCD (1 << 5)
|
|
#define DAVINCI_I2C_IMR_XRDY (1 << 4)
|
|
#define DAVINCI_I2C_IMR_RRDY (1 << 3)
|
|
#define DAVINCI_I2C_IMR_ARDY (1 << 2)
|
|
#define DAVINCI_I2C_IMR_NACK (1 << 1)
|
|
#define DAVINCI_I2C_IMR_AL (1 << 0)
|
|
|
|
#define MOD_REG_BIT(val, mask, set) do { \
|
|
if (set) { \
|
|
val |= mask; \
|
|
} else { \
|
|
val &= ~mask; \
|
|
} \
|
|
} while (0)
|
|
|
|
struct davinci_i2c_dev {
|
|
struct device *dev;
|
|
void __iomem *base;
|
|
struct completion cmd_complete;
|
|
struct clk *clk;
|
|
int cmd_err;
|
|
u8 *buf;
|
|
size_t buf_len;
|
|
int irq;
|
|
struct i2c_adapter adapter;
|
|
};
|
|
|
|
/* default platform data to use if not supplied in the platform_device */
|
|
static struct davinci_i2c_platform_data davinci_i2c_platform_data_default = {
|
|
.bus_freq = 100,
|
|
.bus_delay = 0,
|
|
};
|
|
|
|
static inline void davinci_i2c_write_reg(struct davinci_i2c_dev *i2c_dev,
|
|
int reg, u16 val)
|
|
{
|
|
__raw_writew(val, i2c_dev->base + reg);
|
|
}
|
|
|
|
static inline u16 davinci_i2c_read_reg(struct davinci_i2c_dev *i2c_dev, int reg)
|
|
{
|
|
return __raw_readw(i2c_dev->base + reg);
|
|
}
|
|
|
|
/*
|
|
* This functions configures I2C and brings I2C out of reset.
|
|
* This function is called during I2C init function. This function
|
|
* also gets called if I2C encounters any errors.
|
|
*/
|
|
static int i2c_davinci_init(struct davinci_i2c_dev *dev)
|
|
{
|
|
struct davinci_i2c_platform_data *pdata = dev->dev->platform_data;
|
|
u16 psc;
|
|
u32 clk;
|
|
u32 clkh;
|
|
u32 clkl;
|
|
u32 input_clock = clk_get_rate(dev->clk);
|
|
u16 w;
|
|
|
|
if (!pdata)
|
|
pdata = &davinci_i2c_platform_data_default;
|
|
|
|
/* put I2C into reset */
|
|
w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
|
|
MOD_REG_BIT(w, DAVINCI_I2C_MDR_IRS, 0);
|
|
davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
|
|
|
|
/* NOTE: I2C Clock divider programming info
|
|
* As per I2C specs the following formulas provide prescaler
|
|
* and low/high divider values
|
|
* input clk --> PSC Div -----------> ICCL/H Div --> output clock
|
|
* module clk
|
|
*
|
|
* output clk = module clk / (PSC + 1) [ (ICCL + d) + (ICCH + d) ]
|
|
*
|
|
* Thus,
|
|
* (ICCL + ICCH) = clk = (input clk / ((psc +1) * output clk)) - 2d;
|
|
*
|
|
* where if PSC == 0, d = 7,
|
|
* if PSC == 1, d = 6
|
|
* if PSC > 1 , d = 5
|
|
*/
|
|
|
|
psc = 26; /* To get 1MHz clock */
|
|
|
|
clk = ((input_clock / (psc + 1)) / (pdata->bus_freq * 1000)) - 10;
|
|
clkh = (50 * clk) / 100;
|
|
clkl = clk - clkh;
|
|
|
|
davinci_i2c_write_reg(dev, DAVINCI_I2C_PSC_REG, psc);
|
|
davinci_i2c_write_reg(dev, DAVINCI_I2C_CLKH_REG, clkh);
|
|
davinci_i2c_write_reg(dev, DAVINCI_I2C_CLKL_REG, clkl);
|
|
|
|
dev_dbg(dev->dev, "CLK = %d\n", clk);
|
|
dev_dbg(dev->dev, "PSC = %d\n",
|
|
davinci_i2c_read_reg(dev, DAVINCI_I2C_PSC_REG));
|
|
dev_dbg(dev->dev, "CLKL = %d\n",
|
|
davinci_i2c_read_reg(dev, DAVINCI_I2C_CLKL_REG));
|
|
dev_dbg(dev->dev, "CLKH = %d\n",
|
|
davinci_i2c_read_reg(dev, DAVINCI_I2C_CLKH_REG));
|
|
|
|
/* Take the I2C module out of reset: */
|
|
w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
|
|
MOD_REG_BIT(w, DAVINCI_I2C_MDR_IRS, 1);
|
|
davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
|
|
|
|
/* Enable interrupts */
|
|
davinci_i2c_write_reg(dev, DAVINCI_I2C_IMR_REG, I2C_DAVINCI_INTR_ALL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Waiting for bus not busy
|
|
*/
|
|
static int i2c_davinci_wait_bus_not_busy(struct davinci_i2c_dev *dev,
|
|
char allow_sleep)
|
|
{
|
|
unsigned long timeout;
|
|
|
|
timeout = jiffies + DAVINCI_I2C_TIMEOUT;
|
|
while (davinci_i2c_read_reg(dev, DAVINCI_I2C_STR_REG)
|
|
& DAVINCI_I2C_STR_BB) {
|
|
if (time_after(jiffies, timeout)) {
|
|
dev_warn(dev->dev,
|
|
"timeout waiting for bus ready\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
if (allow_sleep)
|
|
schedule_timeout(1);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Low level master read/write transaction. This function is called
|
|
* from i2c_davinci_xfer.
|
|
*/
|
|
static int
|
|
i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
|
|
{
|
|
struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
|
|
struct davinci_i2c_platform_data *pdata = dev->dev->platform_data;
|
|
u32 flag;
|
|
u32 stat;
|
|
u16 w;
|
|
int r;
|
|
|
|
if (msg->len == 0)
|
|
return -EINVAL;
|
|
|
|
if (!pdata)
|
|
pdata = &davinci_i2c_platform_data_default;
|
|
/* Introduce a delay, required for some boards (e.g Davinci EVM) */
|
|
if (pdata->bus_delay)
|
|
udelay(pdata->bus_delay);
|
|
|
|
/* set the slave address */
|
|
davinci_i2c_write_reg(dev, DAVINCI_I2C_SAR_REG, msg->addr);
|
|
|
|
dev->buf = msg->buf;
|
|
dev->buf_len = msg->len;
|
|
|
|
davinci_i2c_write_reg(dev, DAVINCI_I2C_CNT_REG, dev->buf_len);
|
|
|
|
init_completion(&dev->cmd_complete);
|
|
dev->cmd_err = 0;
|
|
|
|
/* Clear any pending interrupts by reading the IVR */
|
|
stat = davinci_i2c_read_reg(dev, DAVINCI_I2C_IVR_REG);
|
|
|
|
/* Take I2C out of reset, configure it as master and set the
|
|
* start bit */
|
|
flag = DAVINCI_I2C_MDR_IRS | DAVINCI_I2C_MDR_MST | DAVINCI_I2C_MDR_STT;
|
|
|
|
/* if the slave address is ten bit address, enable XA bit */
|
|
if (msg->flags & I2C_M_TEN)
|
|
flag |= DAVINCI_I2C_MDR_XA;
|
|
if (!(msg->flags & I2C_M_RD))
|
|
flag |= DAVINCI_I2C_MDR_TRX;
|
|
if (stop)
|
|
flag |= DAVINCI_I2C_MDR_STP;
|
|
|
|
/* Enable receive or transmit interrupts */
|
|
w = davinci_i2c_read_reg(dev, DAVINCI_I2C_IMR_REG);
|
|
if (msg->flags & I2C_M_RD)
|
|
MOD_REG_BIT(w, DAVINCI_I2C_IMR_RRDY, 1);
|
|
else
|
|
MOD_REG_BIT(w, DAVINCI_I2C_IMR_XRDY, 1);
|
|
davinci_i2c_write_reg(dev, DAVINCI_I2C_IMR_REG, w);
|
|
|
|
/* write the data into mode register */
|
|
davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
|
|
|
|
r = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
|
|
DAVINCI_I2C_TIMEOUT);
|
|
dev->buf_len = 0;
|
|
if (r < 0)
|
|
return r;
|
|
|
|
if (r == 0) {
|
|
dev_err(dev->dev, "controller timed out\n");
|
|
i2c_davinci_init(dev);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/* no error */
|
|
if (likely(!dev->cmd_err))
|
|
return msg->len;
|
|
|
|
/* We have an error */
|
|
if (dev->cmd_err & DAVINCI_I2C_STR_AL) {
|
|
i2c_davinci_init(dev);
|
|
return -EIO;
|
|
}
|
|
|
|
if (dev->cmd_err & DAVINCI_I2C_STR_NACK) {
|
|
if (msg->flags & I2C_M_IGNORE_NAK)
|
|
return msg->len;
|
|
if (stop) {
|
|
w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
|
|
MOD_REG_BIT(w, DAVINCI_I2C_MDR_STP, 1);
|
|
davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
|
|
}
|
|
return -EREMOTEIO;
|
|
}
|
|
return -EIO;
|
|
}
|
|
|
|
/*
|
|
* Prepare controller for a transaction and call i2c_davinci_xfer_msg
|
|
*/
|
|
static int
|
|
i2c_davinci_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
|
|
{
|
|
struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
|
|
int i;
|
|
int ret;
|
|
|
|
dev_dbg(dev->dev, "%s: msgs: %d\n", __FUNCTION__, num);
|
|
|
|
ret = i2c_davinci_wait_bus_not_busy(dev, 1);
|
|
if (ret < 0) {
|
|
dev_warn(dev->dev, "timeout waiting for bus ready\n");
|
|
return ret;
|
|
}
|
|
|
|
for (i = 0; i < num; i++) {
|
|
ret = i2c_davinci_xfer_msg(adap, &msgs[i], (i == (num - 1)));
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
dev_dbg(dev->dev, "%s:%d ret: %d\n", __FUNCTION__, __LINE__, ret);
|
|
|
|
return num;
|
|
}
|
|
|
|
static u32 i2c_davinci_func(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
|
|
}
|
|
|
|
/*
|
|
* Interrupt service routine. This gets called whenever an I2C interrupt
|
|
* occurs.
|
|
*/
|
|
static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id)
|
|
{
|
|
struct davinci_i2c_dev *dev = dev_id;
|
|
u32 stat;
|
|
int count = 0;
|
|
u16 w;
|
|
|
|
while ((stat = davinci_i2c_read_reg(dev, DAVINCI_I2C_IVR_REG))) {
|
|
dev_dbg(dev->dev, "%s: stat=0x%x\n", __FUNCTION__, stat);
|
|
if (count++ == 100) {
|
|
dev_warn(dev->dev, "Too much work in one IRQ\n");
|
|
break;
|
|
}
|
|
|
|
switch (stat) {
|
|
case DAVINCI_I2C_IVR_AL:
|
|
dev->cmd_err |= DAVINCI_I2C_STR_AL;
|
|
complete(&dev->cmd_complete);
|
|
break;
|
|
|
|
case DAVINCI_I2C_IVR_NACK:
|
|
dev->cmd_err |= DAVINCI_I2C_STR_NACK;
|
|
complete(&dev->cmd_complete);
|
|
break;
|
|
|
|
case DAVINCI_I2C_IVR_ARDY:
|
|
w = davinci_i2c_read_reg(dev, DAVINCI_I2C_STR_REG);
|
|
MOD_REG_BIT(w, DAVINCI_I2C_STR_ARDY, 1);
|
|
davinci_i2c_write_reg(dev, DAVINCI_I2C_STR_REG, w);
|
|
complete(&dev->cmd_complete);
|
|
break;
|
|
|
|
case DAVINCI_I2C_IVR_RDR:
|
|
if (dev->buf_len) {
|
|
*dev->buf++ =
|
|
davinci_i2c_read_reg(dev,
|
|
DAVINCI_I2C_DRR_REG);
|
|
dev->buf_len--;
|
|
if (dev->buf_len)
|
|
continue;
|
|
|
|
w = davinci_i2c_read_reg(dev,
|
|
DAVINCI_I2C_STR_REG);
|
|
MOD_REG_BIT(w, DAVINCI_I2C_IMR_RRDY, 0);
|
|
davinci_i2c_write_reg(dev,
|
|
DAVINCI_I2C_STR_REG,
|
|
w);
|
|
} else
|
|
dev_err(dev->dev, "RDR IRQ while no "
|
|
"data requested\n");
|
|
break;
|
|
|
|
case DAVINCI_I2C_IVR_XRDY:
|
|
if (dev->buf_len) {
|
|
davinci_i2c_write_reg(dev, DAVINCI_I2C_DXR_REG,
|
|
*dev->buf++);
|
|
dev->buf_len--;
|
|
if (dev->buf_len)
|
|
continue;
|
|
|
|
w = davinci_i2c_read_reg(dev,
|
|
DAVINCI_I2C_IMR_REG);
|
|
MOD_REG_BIT(w, DAVINCI_I2C_IMR_XRDY, 0);
|
|
davinci_i2c_write_reg(dev,
|
|
DAVINCI_I2C_IMR_REG,
|
|
w);
|
|
} else
|
|
dev_err(dev->dev, "TDR IRQ while no data to "
|
|
"send\n");
|
|
break;
|
|
|
|
case DAVINCI_I2C_IVR_SCD:
|
|
w = davinci_i2c_read_reg(dev, DAVINCI_I2C_STR_REG);
|
|
MOD_REG_BIT(w, DAVINCI_I2C_STR_SCD, 1);
|
|
davinci_i2c_write_reg(dev, DAVINCI_I2C_STR_REG, w);
|
|
complete(&dev->cmd_complete);
|
|
break;
|
|
|
|
case DAVINCI_I2C_IVR_AAS:
|
|
dev_warn(dev->dev, "Address as slave interrupt\n");
|
|
}/* switch */
|
|
}/* while */
|
|
|
|
return count ? IRQ_HANDLED : IRQ_NONE;
|
|
}
|
|
|
|
static struct i2c_algorithm i2c_davinci_algo = {
|
|
.master_xfer = i2c_davinci_xfer,
|
|
.functionality = i2c_davinci_func,
|
|
};
|
|
|
|
static int davinci_i2c_probe(struct platform_device *pdev)
|
|
{
|
|
struct davinci_i2c_dev *dev;
|
|
struct i2c_adapter *adap;
|
|
struct resource *mem, *irq, *ioarea;
|
|
int r;
|
|
|
|
/* NOTE: driver uses the static register mapping */
|
|
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!mem) {
|
|
dev_err(&pdev->dev, "no mem resource?\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
|
|
if (!irq) {
|
|
dev_err(&pdev->dev, "no irq resource?\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
ioarea = request_mem_region(mem->start, (mem->end - mem->start) + 1,
|
|
pdev->name);
|
|
if (!ioarea) {
|
|
dev_err(&pdev->dev, "I2C region already claimed\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
dev = kzalloc(sizeof(struct davinci_i2c_dev), GFP_KERNEL);
|
|
if (!dev) {
|
|
r = -ENOMEM;
|
|
goto err_release_region;
|
|
}
|
|
|
|
dev->dev = get_device(&pdev->dev);
|
|
dev->irq = irq->start;
|
|
platform_set_drvdata(pdev, dev);
|
|
|
|
dev->clk = clk_get(&pdev->dev, "I2CCLK");
|
|
if (IS_ERR(dev->clk)) {
|
|
r = -ENODEV;
|
|
goto err_free_mem;
|
|
}
|
|
clk_enable(dev->clk);
|
|
|
|
dev->base = (void __iomem *)IO_ADDRESS(mem->start);
|
|
i2c_davinci_init(dev);
|
|
|
|
r = request_irq(dev->irq, i2c_davinci_isr, 0, pdev->name, dev);
|
|
if (r) {
|
|
dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq);
|
|
goto err_unuse_clocks;
|
|
}
|
|
|
|
adap = &dev->adapter;
|
|
i2c_set_adapdata(adap, dev);
|
|
adap->owner = THIS_MODULE;
|
|
adap->class = I2C_CLASS_HWMON;
|
|
strlcpy(adap->name, "DaVinci I2C adapter", sizeof(adap->name));
|
|
adap->algo = &i2c_davinci_algo;
|
|
adap->dev.parent = &pdev->dev;
|
|
|
|
/* FIXME */
|
|
adap->timeout = 1;
|
|
|
|
adap->nr = pdev->id;
|
|
r = i2c_add_numbered_adapter(adap);
|
|
if (r) {
|
|
dev_err(&pdev->dev, "failure adding adapter\n");
|
|
goto err_free_irq;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_free_irq:
|
|
free_irq(dev->irq, dev);
|
|
err_unuse_clocks:
|
|
clk_disable(dev->clk);
|
|
clk_put(dev->clk);
|
|
dev->clk = NULL;
|
|
err_free_mem:
|
|
platform_set_drvdata(pdev, NULL);
|
|
put_device(&pdev->dev);
|
|
kfree(dev);
|
|
err_release_region:
|
|
release_mem_region(mem->start, (mem->end - mem->start) + 1);
|
|
|
|
return r;
|
|
}
|
|
|
|
static int davinci_i2c_remove(struct platform_device *pdev)
|
|
{
|
|
struct davinci_i2c_dev *dev = platform_get_drvdata(pdev);
|
|
struct resource *mem;
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
i2c_del_adapter(&dev->adapter);
|
|
put_device(&pdev->dev);
|
|
|
|
clk_disable(dev->clk);
|
|
clk_put(dev->clk);
|
|
dev->clk = NULL;
|
|
|
|
davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, 0);
|
|
free_irq(IRQ_I2C, dev);
|
|
kfree(dev);
|
|
|
|
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
release_mem_region(mem->start, (mem->end - mem->start) + 1);
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver davinci_i2c_driver = {
|
|
.probe = davinci_i2c_probe,
|
|
.remove = davinci_i2c_remove,
|
|
.driver = {
|
|
.name = "i2c_davinci",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
/* I2C may be needed to bring up other drivers */
|
|
static int __init davinci_i2c_init_driver(void)
|
|
{
|
|
return platform_driver_register(&davinci_i2c_driver);
|
|
}
|
|
subsys_initcall(davinci_i2c_init_driver);
|
|
|
|
static void __exit davinci_i2c_exit_driver(void)
|
|
{
|
|
platform_driver_unregister(&davinci_i2c_driver);
|
|
}
|
|
module_exit(davinci_i2c_exit_driver);
|
|
|
|
MODULE_AUTHOR("Texas Instruments India");
|
|
MODULE_DESCRIPTION("TI DaVinci I2C bus adapter");
|
|
MODULE_LICENSE("GPL");
|