mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-23 18:07:03 +00:00
ff2e6d7e27
This fixes a mistake I made when editing these functions - when I took out the interrupt disabling code (because interrupts are now disabled by the caller) I left the register that is used for the MSR value to be used during doze/nap uninitialized. This fixes it. Also updated some of the comments in idle_power4.S and removed some code that was copied over from idle_6xx.S but is no longer relevant (we don't ever clear the CPU_FTR_CAN_NAP bit at runtime for POWER4). Signed-off-by: Paul Mackerras <paulus@samba.org>
220 lines
5.1 KiB
ArmAsm
220 lines
5.1 KiB
ArmAsm
/*
|
|
* This file contains the power_save function for 6xx & 7xxx CPUs
|
|
* rewritten in assembler
|
|
*
|
|
* Warning ! This code assumes that if your machine has a 750fx
|
|
* it will have PLL 1 set to low speed mode (used during NAP/DOZE).
|
|
* if this is not the case some additional changes will have to
|
|
* be done to check a runtime var (a bit like powersave-nap)
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/threads.h>
|
|
#include <asm/reg.h>
|
|
#include <asm/page.h>
|
|
#include <asm/cputable.h>
|
|
#include <asm/thread_info.h>
|
|
#include <asm/ppc_asm.h>
|
|
#include <asm/asm-offsets.h>
|
|
|
|
#undef DEBUG
|
|
|
|
.text
|
|
|
|
/*
|
|
* Init idle, called at early CPU setup time from head.S for each CPU
|
|
* Make sure no rest of NAP mode remains in HID0, save default
|
|
* values for some CPU specific registers. Called with r24
|
|
* containing CPU number and r3 reloc offset
|
|
*/
|
|
_GLOBAL(init_idle_6xx)
|
|
BEGIN_FTR_SECTION
|
|
mfspr r4,SPRN_HID0
|
|
rlwinm r4,r4,0,10,8 /* Clear NAP */
|
|
mtspr SPRN_HID0, r4
|
|
b 1f
|
|
END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
|
|
blr
|
|
1:
|
|
slwi r5,r24,2
|
|
add r5,r5,r3
|
|
BEGIN_FTR_SECTION
|
|
mfspr r4,SPRN_MSSCR0
|
|
addis r6,r5, nap_save_msscr0@ha
|
|
stw r4,nap_save_msscr0@l(r6)
|
|
END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
|
|
BEGIN_FTR_SECTION
|
|
mfspr r4,SPRN_HID1
|
|
addis r6,r5,nap_save_hid1@ha
|
|
stw r4,nap_save_hid1@l(r6)
|
|
END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX)
|
|
blr
|
|
|
|
/*
|
|
* Here is the power_save_6xx function. This could eventually be
|
|
* split into several functions & changing the function pointer
|
|
* depending on the various features.
|
|
*/
|
|
_GLOBAL(ppc6xx_idle)
|
|
/* Check if we can nap or doze, put HID0 mask in r3
|
|
*/
|
|
lis r3, 0
|
|
BEGIN_FTR_SECTION
|
|
lis r3,HID0_DOZE@h
|
|
END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
|
|
BEGIN_FTR_SECTION
|
|
/* We must dynamically check for the NAP feature as it
|
|
* can be cleared by CPU init after the fixups are done
|
|
*/
|
|
lis r4,cur_cpu_spec@ha
|
|
lwz r4,cur_cpu_spec@l(r4)
|
|
lwz r4,CPU_SPEC_FEATURES(r4)
|
|
andi. r0,r4,CPU_FTR_CAN_NAP
|
|
beq 1f
|
|
/* Now check if user or arch enabled NAP mode */
|
|
lis r4,powersave_nap@ha
|
|
lwz r4,powersave_nap@l(r4)
|
|
cmpwi 0,r4,0
|
|
beq 1f
|
|
lis r3,HID0_NAP@h
|
|
1:
|
|
END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
|
|
cmpwi 0,r3,0
|
|
beqlr
|
|
|
|
/* Some pre-nap cleanups needed on some CPUs */
|
|
andis. r0,r3,HID0_NAP@h
|
|
beq 2f
|
|
BEGIN_FTR_SECTION
|
|
/* Disable L2 prefetch on some 745x and try to ensure
|
|
* L2 prefetch engines are idle. As explained by errata
|
|
* text, we can't be sure they are, we just hope very hard
|
|
* that well be enough (sic !). At least I noticed Apple
|
|
* doesn't even bother doing the dcbf's here...
|
|
*/
|
|
mfspr r4,SPRN_MSSCR0
|
|
rlwinm r4,r4,0,0,29
|
|
sync
|
|
mtspr SPRN_MSSCR0,r4
|
|
sync
|
|
isync
|
|
lis r4,KERNELBASE@h
|
|
dcbf 0,r4
|
|
dcbf 0,r4
|
|
dcbf 0,r4
|
|
dcbf 0,r4
|
|
END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
|
|
#ifdef DEBUG
|
|
lis r6,nap_enter_count@ha
|
|
lwz r4,nap_enter_count@l(r6)
|
|
addi r4,r4,1
|
|
stw r4,nap_enter_count@l(r6)
|
|
#endif
|
|
2:
|
|
BEGIN_FTR_SECTION
|
|
/* Go to low speed mode on some 750FX */
|
|
lis r4,powersave_lowspeed@ha
|
|
lwz r4,powersave_lowspeed@l(r4)
|
|
cmpwi 0,r4,0
|
|
beq 1f
|
|
mfspr r4,SPRN_HID1
|
|
oris r4,r4,0x0001
|
|
mtspr SPRN_HID1,r4
|
|
1:
|
|
END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX)
|
|
|
|
/* Go to NAP or DOZE now */
|
|
mfspr r4,SPRN_HID0
|
|
lis r5,(HID0_NAP|HID0_SLEEP)@h
|
|
BEGIN_FTR_SECTION
|
|
oris r5,r5,HID0_DOZE@h
|
|
END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
|
|
andc r4,r4,r5
|
|
or r4,r4,r3
|
|
BEGIN_FTR_SECTION
|
|
oris r4,r4,HID0_DPM@h /* that should be done once for all */
|
|
END_FTR_SECTION_IFCLR(CPU_FTR_NO_DPM)
|
|
mtspr SPRN_HID0,r4
|
|
BEGIN_FTR_SECTION
|
|
DSSALL
|
|
sync
|
|
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
|
|
mfmsr r7
|
|
ori r7,r7,MSR_EE
|
|
oris r7,r7,MSR_POW@h
|
|
sync
|
|
isync
|
|
mtmsr r7
|
|
isync
|
|
sync
|
|
blr
|
|
|
|
/*
|
|
* Return from NAP/DOZE mode, restore some CPU specific registers,
|
|
* we are called with DR/IR still off and r2 containing physical
|
|
* address of current.
|
|
*/
|
|
_GLOBAL(power_save_6xx_restore)
|
|
mfspr r11,SPRN_HID0
|
|
rlwinm. r11,r11,0,10,8 /* Clear NAP & copy NAP bit !state to cr1 EQ */
|
|
cror 4*cr1+eq,4*cr0+eq,4*cr0+eq
|
|
BEGIN_FTR_SECTION
|
|
rlwinm r11,r11,0,9,7 /* Clear DOZE */
|
|
END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
|
|
mtspr SPRN_HID0, r11
|
|
|
|
#ifdef DEBUG
|
|
beq cr1,1f
|
|
lis r11,(nap_return_count-KERNELBASE)@ha
|
|
lwz r9,nap_return_count@l(r11)
|
|
addi r9,r9,1
|
|
stw r9,nap_return_count@l(r11)
|
|
1:
|
|
#endif
|
|
|
|
rlwinm r9,r1,0,0,18
|
|
tophys(r9,r9)
|
|
lwz r11,TI_CPU(r9)
|
|
slwi r11,r11,2
|
|
/* Todo make sure all these are in the same page
|
|
* and load r22 (@ha part + CPU offset) only once
|
|
*/
|
|
BEGIN_FTR_SECTION
|
|
beq cr1,1f
|
|
addis r9,r11,(nap_save_msscr0-KERNELBASE)@ha
|
|
lwz r9,nap_save_msscr0@l(r9)
|
|
mtspr SPRN_MSSCR0, r9
|
|
sync
|
|
isync
|
|
1:
|
|
END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
|
|
BEGIN_FTR_SECTION
|
|
addis r9,r11,(nap_save_hid1-KERNELBASE)@ha
|
|
lwz r9,nap_save_hid1@l(r9)
|
|
mtspr SPRN_HID1, r9
|
|
END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX)
|
|
b transfer_to_handler_cont
|
|
|
|
.data
|
|
|
|
_GLOBAL(nap_save_msscr0)
|
|
.space 4*NR_CPUS
|
|
|
|
_GLOBAL(nap_save_hid1)
|
|
.space 4*NR_CPUS
|
|
|
|
_GLOBAL(powersave_lowspeed)
|
|
.long 0
|
|
|
|
#ifdef DEBUG
|
|
_GLOBAL(nap_enter_count)
|
|
.space 4
|
|
_GLOBAL(nap_return_count)
|
|
.space 4
|
|
#endif
|