linux/drivers/thunderbolt
Mika Westerberg 3cdb9446a1 thunderbolt: Add support for Intel Ice Lake
The Thunderbolt controller is integrated into the Ice Lake CPU itself
and requires special flows to power it on and off using force power bit
in NHI VSEC registers. Runtime PM (RTD3) and Sx flows also differ from
the discrete solutions. Now the firmware notifies the driver whether
RTD3 entry or exit are possible. The driver is responsible of sending
Go2Sx command through link controller mailbox when system enters Sx
states (suspend-to-mem/disk). Rest of the ICM firwmare flows follow
Titan Ridge.

Signed-off-by: Raanan Avargil <raanan.avargil@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Tested-by: Mario Limonciello <mario.limonciello@dell.com>
2019-08-26 12:15:06 +03:00
..
cap.c
ctl.c thunderbolt: Do not fail adding switch if some port is not implemented 2019-08-26 12:14:51 +03:00
ctl.h
dma_port.c
dma_port.h
domain.c
eeprom.c thunderbolt: Do not fail adding switch if some port is not implemented 2019-08-26 12:14:51 +03:00
icm.c thunderbolt: Add support for Intel Ice Lake 2019-08-26 12:15:06 +03:00
Kconfig
lc.c
Makefile thunderbolt: Add support for Intel Ice Lake 2019-08-26 12:15:06 +03:00
nhi_ops.c thunderbolt: Add support for Intel Ice Lake 2019-08-26 12:15:06 +03:00
nhi_regs.h thunderbolt: Add support for Intel Ice Lake 2019-08-26 12:15:06 +03:00
nhi.c thunderbolt: Add support for Intel Ice Lake 2019-08-26 12:15:06 +03:00
nhi.h thunderbolt: Add support for Intel Ice Lake 2019-08-26 12:15:06 +03:00
path.c
property.c
switch.c thunderbolt: Add support for Intel Ice Lake 2019-08-26 12:15:06 +03:00
tb_msgs.h thunderbolt: Add support for Intel Ice Lake 2019-08-26 12:15:06 +03:00
tb_regs.h
tb.c
tb.h
tunnel.c thunderbolt: Correct path indices for PCIe tunnel 2019-08-26 12:08:57 +03:00
tunnel.h
xdomain.c thunderbolt: Show key using %*pE not %*pEp 2019-08-06 15:35:43 +03:00