linux/arch/powerpc/perf/power4-pmu.c
Michael Ellerman f2699491e0 powerpc/perf: Move perf core & PMU code into a subdirectory
The perf code has grown a lot since it started, and is big enough to
warrant its own subdirectory. For reference it's ~60% bigger than the
oprofile code. It declutters the kernel directory, makes it simpler to
grep for "just perf stuff", and allows us to shorten some filenames.

While we're at it, make it more obvious that we have two implementations
of the core perf logic. One for (roughly) Book3S CPUs, which was the
original implementation, and the other for Freescale embedded CPUs.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-23 10:50:04 +11:00

622 lines
17 KiB
C

/*
* Performance counter support for POWER4 (GP) and POWER4+ (GQ) processors.
*
* Copyright 2009 Paul Mackerras, IBM Corporation.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/perf_event.h>
#include <linux/string.h>
#include <asm/reg.h>
#include <asm/cputable.h>
/*
* Bits in event code for POWER4
*/
#define PM_PMC_SH 12 /* PMC number (1-based) for direct events */
#define PM_PMC_MSK 0xf
#define PM_UNIT_SH 8 /* TTMMUX number and setting - unit select */
#define PM_UNIT_MSK 0xf
#define PM_LOWER_SH 6
#define PM_LOWER_MSK 1
#define PM_LOWER_MSKS 0x40
#define PM_BYTE_SH 4 /* Byte number of event bus to use */
#define PM_BYTE_MSK 3
#define PM_PMCSEL_MSK 7
/*
* Unit code values
*/
#define PM_FPU 1
#define PM_ISU1 2
#define PM_IFU 3
#define PM_IDU0 4
#define PM_ISU1_ALT 6
#define PM_ISU2 7
#define PM_IFU_ALT 8
#define PM_LSU0 9
#define PM_LSU1 0xc
#define PM_GPS 0xf
/*
* Bits in MMCR0 for POWER4
*/
#define MMCR0_PMC1SEL_SH 8
#define MMCR0_PMC2SEL_SH 1
#define MMCR_PMCSEL_MSK 0x1f
/*
* Bits in MMCR1 for POWER4
*/
#define MMCR1_TTM0SEL_SH 62
#define MMCR1_TTC0SEL_SH 61
#define MMCR1_TTM1SEL_SH 59
#define MMCR1_TTC1SEL_SH 58
#define MMCR1_TTM2SEL_SH 56
#define MMCR1_TTC2SEL_SH 55
#define MMCR1_TTM3SEL_SH 53
#define MMCR1_TTC3SEL_SH 52
#define MMCR1_TTMSEL_MSK 3
#define MMCR1_TD_CP_DBG0SEL_SH 50
#define MMCR1_TD_CP_DBG1SEL_SH 48
#define MMCR1_TD_CP_DBG2SEL_SH 46
#define MMCR1_TD_CP_DBG3SEL_SH 44
#define MMCR1_DEBUG0SEL_SH 43
#define MMCR1_DEBUG1SEL_SH 42
#define MMCR1_DEBUG2SEL_SH 41
#define MMCR1_DEBUG3SEL_SH 40
#define MMCR1_PMC1_ADDER_SEL_SH 39
#define MMCR1_PMC2_ADDER_SEL_SH 38
#define MMCR1_PMC6_ADDER_SEL_SH 37
#define MMCR1_PMC5_ADDER_SEL_SH 36
#define MMCR1_PMC8_ADDER_SEL_SH 35
#define MMCR1_PMC7_ADDER_SEL_SH 34
#define MMCR1_PMC3_ADDER_SEL_SH 33
#define MMCR1_PMC4_ADDER_SEL_SH 32
#define MMCR1_PMC3SEL_SH 27
#define MMCR1_PMC4SEL_SH 22
#define MMCR1_PMC5SEL_SH 17
#define MMCR1_PMC6SEL_SH 12
#define MMCR1_PMC7SEL_SH 7
#define MMCR1_PMC8SEL_SH 2 /* note bit 0 is in MMCRA for GP */
static short mmcr1_adder_bits[8] = {
MMCR1_PMC1_ADDER_SEL_SH,
MMCR1_PMC2_ADDER_SEL_SH,
MMCR1_PMC3_ADDER_SEL_SH,
MMCR1_PMC4_ADDER_SEL_SH,
MMCR1_PMC5_ADDER_SEL_SH,
MMCR1_PMC6_ADDER_SEL_SH,
MMCR1_PMC7_ADDER_SEL_SH,
MMCR1_PMC8_ADDER_SEL_SH
};
/*
* Bits in MMCRA
*/
#define MMCRA_PMC8SEL0_SH 17 /* PMC8SEL bit 0 for GP */
/*
* Layout of constraint bits:
* 6666555555555544444444443333333333222222222211111111110000000000
* 3210987654321098765432109876543210987654321098765432109876543210
* |[ >[ >[ >|||[ >[ >< >< >< >< ><><><><><><><><>
* | UC1 UC2 UC3 ||| PS1 PS2 B0 B1 B2 B3 P1P2P3P4P5P6P7P8
* \SMPL ||\TTC3SEL
* |\TTC_IFU_SEL
* \TTM2SEL0
*
* SMPL - SAMPLE_ENABLE constraint
* 56: SAMPLE_ENABLE value 0x0100_0000_0000_0000
*
* UC1 - unit constraint 1: can't have all three of FPU/ISU1/IDU0|ISU2
* 55: UC1 error 0x0080_0000_0000_0000
* 54: FPU events needed 0x0040_0000_0000_0000
* 53: ISU1 events needed 0x0020_0000_0000_0000
* 52: IDU0|ISU2 events needed 0x0010_0000_0000_0000
*
* UC2 - unit constraint 2: can't have all three of FPU/IFU/LSU0
* 51: UC2 error 0x0008_0000_0000_0000
* 50: FPU events needed 0x0004_0000_0000_0000
* 49: IFU events needed 0x0002_0000_0000_0000
* 48: LSU0 events needed 0x0001_0000_0000_0000
*
* UC3 - unit constraint 3: can't have all four of LSU0/IFU/IDU0|ISU2/ISU1
* 47: UC3 error 0x8000_0000_0000
* 46: LSU0 events needed 0x4000_0000_0000
* 45: IFU events needed 0x2000_0000_0000
* 44: IDU0|ISU2 events needed 0x1000_0000_0000
* 43: ISU1 events needed 0x0800_0000_0000
*
* TTM2SEL0
* 42: 0 = IDU0 events needed
* 1 = ISU2 events needed 0x0400_0000_0000
*
* TTC_IFU_SEL
* 41: 0 = IFU.U events needed
* 1 = IFU.L events needed 0x0200_0000_0000
*
* TTC3SEL
* 40: 0 = LSU1.U events needed
* 1 = LSU1.L events needed 0x0100_0000_0000
*
* PS1
* 39: PS1 error 0x0080_0000_0000
* 36-38: count of events needing PMC1/2/5/6 0x0070_0000_0000
*
* PS2
* 35: PS2 error 0x0008_0000_0000
* 32-34: count of events needing PMC3/4/7/8 0x0007_0000_0000
*
* B0
* 28-31: Byte 0 event source 0xf000_0000
* 1 = FPU
* 2 = ISU1
* 3 = IFU
* 4 = IDU0
* 7 = ISU2
* 9 = LSU0
* c = LSU1
* f = GPS
*
* B1, B2, B3
* 24-27, 20-23, 16-19: Byte 1, 2, 3 event sources
*
* P8
* 15: P8 error 0x8000
* 14-15: Count of events needing PMC8
*
* P1..P7
* 0-13: Count of events needing PMC1..PMC7
*
* Note: this doesn't allow events using IFU.U to be combined with events
* using IFU.L, though that is feasible (using TTM0 and TTM2). However
* there are no listed events for IFU.L (they are debug events not
* verified for performance monitoring) so this shouldn't cause a
* problem.
*/
static struct unitinfo {
unsigned long value, mask;
int unit;
int lowerbit;
} p4_unitinfo[16] = {
[PM_FPU] = { 0x44000000000000ul, 0x88000000000000ul, PM_FPU, 0 },
[PM_ISU1] = { 0x20080000000000ul, 0x88000000000000ul, PM_ISU1, 0 },
[PM_ISU1_ALT] =
{ 0x20080000000000ul, 0x88000000000000ul, PM_ISU1, 0 },
[PM_IFU] = { 0x02200000000000ul, 0x08820000000000ul, PM_IFU, 41 },
[PM_IFU_ALT] =
{ 0x02200000000000ul, 0x08820000000000ul, PM_IFU, 41 },
[PM_IDU0] = { 0x10100000000000ul, 0x80840000000000ul, PM_IDU0, 1 },
[PM_ISU2] = { 0x10140000000000ul, 0x80840000000000ul, PM_ISU2, 0 },
[PM_LSU0] = { 0x01400000000000ul, 0x08800000000000ul, PM_LSU0, 0 },
[PM_LSU1] = { 0x00000000000000ul, 0x00010000000000ul, PM_LSU1, 40 },
[PM_GPS] = { 0x00000000000000ul, 0x00000000000000ul, PM_GPS, 0 }
};
static unsigned char direct_marked_event[8] = {
(1<<2) | (1<<3), /* PMC1: PM_MRK_GRP_DISP, PM_MRK_ST_CMPL */
(1<<3) | (1<<5), /* PMC2: PM_THRESH_TIMEO, PM_MRK_BRU_FIN */
(1<<3), /* PMC3: PM_MRK_ST_CMPL_INT */
(1<<4) | (1<<5), /* PMC4: PM_MRK_GRP_CMPL, PM_MRK_CRU_FIN */
(1<<4) | (1<<5), /* PMC5: PM_MRK_GRP_TIMEO */
(1<<3) | (1<<4) | (1<<5),
/* PMC6: PM_MRK_ST_GPS, PM_MRK_FXU_FIN, PM_MRK_GRP_ISSUED */
(1<<4) | (1<<5), /* PMC7: PM_MRK_FPU_FIN, PM_MRK_INST_FIN */
(1<<4), /* PMC8: PM_MRK_LSU_FIN */
};
/*
* Returns 1 if event counts things relating to marked instructions
* and thus needs the MMCRA_SAMPLE_ENABLE bit set, or 0 if not.
*/
static int p4_marked_instr_event(u64 event)
{
int pmc, psel, unit, byte, bit;
unsigned int mask;
pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
psel = event & PM_PMCSEL_MSK;
if (pmc) {
if (direct_marked_event[pmc - 1] & (1 << psel))
return 1;
if (psel == 0) /* add events */
bit = (pmc <= 4)? pmc - 1: 8 - pmc;
else if (psel == 6) /* decode events */
bit = 4;
else
return 0;
} else
bit = psel;
byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK;
unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK;
mask = 0;
switch (unit) {
case PM_LSU1:
if (event & PM_LOWER_MSKS)
mask = 1 << 28; /* byte 7 bit 4 */
else
mask = 6 << 24; /* byte 3 bits 1 and 2 */
break;
case PM_LSU0:
/* byte 3, bit 3; byte 2 bits 0,2,3,4,5; byte 1 */
mask = 0x083dff00;
}
return (mask >> (byte * 8 + bit)) & 1;
}
static int p4_get_constraint(u64 event, unsigned long *maskp,
unsigned long *valp)
{
int pmc, byte, unit, lower, sh;
unsigned long mask = 0, value = 0;
int grp = -1;
pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
if (pmc) {
if (pmc > 8)
return -1;
sh = (pmc - 1) * 2;
mask |= 2 << sh;
value |= 1 << sh;
grp = ((pmc - 1) >> 1) & 1;
}
unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK;
byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK;
if (unit) {
lower = (event >> PM_LOWER_SH) & PM_LOWER_MSK;
/*
* Bus events on bytes 0 and 2 can be counted
* on PMC1/2/5/6; bytes 1 and 3 on PMC3/4/7/8.
*/
if (!pmc)
grp = byte & 1;
if (!p4_unitinfo[unit].unit)
return -1;
mask |= p4_unitinfo[unit].mask;
value |= p4_unitinfo[unit].value;
sh = p4_unitinfo[unit].lowerbit;
if (sh > 1)
value |= (unsigned long)lower << sh;
else if (lower != sh)
return -1;
unit = p4_unitinfo[unit].unit;
/* Set byte lane select field */
mask |= 0xfULL << (28 - 4 * byte);
value |= (unsigned long)unit << (28 - 4 * byte);
}
if (grp == 0) {
/* increment PMC1/2/5/6 field */
mask |= 0x8000000000ull;
value |= 0x1000000000ull;
} else {
/* increment PMC3/4/7/8 field */
mask |= 0x800000000ull;
value |= 0x100000000ull;
}
/* Marked instruction events need sample_enable set */
if (p4_marked_instr_event(event)) {
mask |= 1ull << 56;
value |= 1ull << 56;
}
/* PMCSEL=6 decode events on byte 2 need sample_enable clear */
if (pmc && (event & PM_PMCSEL_MSK) == 6 && byte == 2)
mask |= 1ull << 56;
*maskp = mask;
*valp = value;
return 0;
}
static unsigned int ppc_inst_cmpl[] = {
0x1001, 0x4001, 0x6001, 0x7001, 0x8001
};
static int p4_get_alternatives(u64 event, unsigned int flags, u64 alt[])
{
int i, j, na;
alt[0] = event;
na = 1;
/* 2 possibilities for PM_GRP_DISP_REJECT */
if (event == 0x8003 || event == 0x0224) {
alt[1] = event ^ (0x8003 ^ 0x0224);
return 2;
}
/* 2 possibilities for PM_ST_MISS_L1 */
if (event == 0x0c13 || event == 0x0c23) {
alt[1] = event ^ (0x0c13 ^ 0x0c23);
return 2;
}
/* several possibilities for PM_INST_CMPL */
for (i = 0; i < ARRAY_SIZE(ppc_inst_cmpl); ++i) {
if (event == ppc_inst_cmpl[i]) {
for (j = 0; j < ARRAY_SIZE(ppc_inst_cmpl); ++j)
if (j != i)
alt[na++] = ppc_inst_cmpl[j];
break;
}
}
return na;
}
static int p4_compute_mmcr(u64 event[], int n_ev,
unsigned int hwc[], unsigned long mmcr[])
{
unsigned long mmcr0 = 0, mmcr1 = 0, mmcra = 0;
unsigned int pmc, unit, byte, psel, lower;
unsigned int ttm, grp;
unsigned int pmc_inuse = 0;
unsigned int pmc_grp_use[2];
unsigned char busbyte[4];
unsigned char unituse[16];
unsigned int unitlower = 0;
int i;
if (n_ev > 8)
return -1;
/* First pass to count resource use */
pmc_grp_use[0] = pmc_grp_use[1] = 0;
memset(busbyte, 0, sizeof(busbyte));
memset(unituse, 0, sizeof(unituse));
for (i = 0; i < n_ev; ++i) {
pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK;
if (pmc) {
if (pmc_inuse & (1 << (pmc - 1)))
return -1;
pmc_inuse |= 1 << (pmc - 1);
/* count 1/2/5/6 vs 3/4/7/8 use */
++pmc_grp_use[((pmc - 1) >> 1) & 1];
}
unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK;
byte = (event[i] >> PM_BYTE_SH) & PM_BYTE_MSK;
lower = (event[i] >> PM_LOWER_SH) & PM_LOWER_MSK;
if (unit) {
if (!pmc)
++pmc_grp_use[byte & 1];
if (unit == 6 || unit == 8)
/* map alt ISU1/IFU codes: 6->2, 8->3 */
unit = (unit >> 1) - 1;
if (busbyte[byte] && busbyte[byte] != unit)
return -1;
busbyte[byte] = unit;
lower <<= unit;
if (unituse[unit] && lower != (unitlower & lower))
return -1;
unituse[unit] = 1;
unitlower |= lower;
}
}
if (pmc_grp_use[0] > 4 || pmc_grp_use[1] > 4)
return -1;
/*
* Assign resources and set multiplexer selects.
*
* Units 1,2,3 are on TTM0, 4,6,7 on TTM1, 8,10 on TTM2.
* Each TTMx can only select one unit, but since
* units 2 and 6 are both ISU1, and 3 and 8 are both IFU,
* we have some choices.
*/
if (unituse[2] & (unituse[1] | (unituse[3] & unituse[9]))) {
unituse[6] = 1; /* Move 2 to 6 */
unituse[2] = 0;
}
if (unituse[3] & (unituse[1] | unituse[2])) {
unituse[8] = 1; /* Move 3 to 8 */
unituse[3] = 0;
unitlower = (unitlower & ~8) | ((unitlower & 8) << 5);
}
/* Check only one unit per TTMx */
if (unituse[1] + unituse[2] + unituse[3] > 1 ||
unituse[4] + unituse[6] + unituse[7] > 1 ||
unituse[8] + unituse[9] > 1 ||
(unituse[5] | unituse[10] | unituse[11] |
unituse[13] | unituse[14]))
return -1;
/* Set TTMxSEL fields. Note, units 1-3 => TTM0SEL codes 0-2 */
mmcr1 |= (unsigned long)(unituse[3] * 2 + unituse[2])
<< MMCR1_TTM0SEL_SH;
mmcr1 |= (unsigned long)(unituse[7] * 3 + unituse[6] * 2)
<< MMCR1_TTM1SEL_SH;
mmcr1 |= (unsigned long)unituse[9] << MMCR1_TTM2SEL_SH;
/* Set TTCxSEL fields. */
if (unitlower & 0xe)
mmcr1 |= 1ull << MMCR1_TTC0SEL_SH;
if (unitlower & 0xf0)
mmcr1 |= 1ull << MMCR1_TTC1SEL_SH;
if (unitlower & 0xf00)
mmcr1 |= 1ull << MMCR1_TTC2SEL_SH;
if (unitlower & 0x7000)
mmcr1 |= 1ull << MMCR1_TTC3SEL_SH;
/* Set byte lane select fields. */
for (byte = 0; byte < 4; ++byte) {
unit = busbyte[byte];
if (!unit)
continue;
if (unit == 0xf) {
/* special case for GPS */
mmcr1 |= 1ull << (MMCR1_DEBUG0SEL_SH - byte);
} else {
if (!unituse[unit])
ttm = unit - 1; /* 2->1, 3->2 */
else
ttm = unit >> 2;
mmcr1 |= (unsigned long)ttm
<< (MMCR1_TD_CP_DBG0SEL_SH - 2 * byte);
}
}
/* Second pass: assign PMCs, set PMCxSEL and PMCx_ADDER_SEL fields */
for (i = 0; i < n_ev; ++i) {
pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK;
unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK;
byte = (event[i] >> PM_BYTE_SH) & PM_BYTE_MSK;
psel = event[i] & PM_PMCSEL_MSK;
if (!pmc) {
/* Bus event or 00xxx direct event (off or cycles) */
if (unit)
psel |= 0x10 | ((byte & 2) << 2);
for (pmc = 0; pmc < 8; ++pmc) {
if (pmc_inuse & (1 << pmc))
continue;
grp = (pmc >> 1) & 1;
if (unit) {
if (grp == (byte & 1))
break;
} else if (pmc_grp_use[grp] < 4) {
++pmc_grp_use[grp];
break;
}
}
pmc_inuse |= 1 << pmc;
} else {
/* Direct event */
--pmc;
if (psel == 0 && (byte & 2))
/* add events on higher-numbered bus */
mmcr1 |= 1ull << mmcr1_adder_bits[pmc];
else if (psel == 6 && byte == 3)
/* seem to need to set sample_enable here */
mmcra |= MMCRA_SAMPLE_ENABLE;
psel |= 8;
}
if (pmc <= 1)
mmcr0 |= psel << (MMCR0_PMC1SEL_SH - 7 * pmc);
else
mmcr1 |= psel << (MMCR1_PMC3SEL_SH - 5 * (pmc - 2));
if (pmc == 7) /* PMC8 */
mmcra |= (psel & 1) << MMCRA_PMC8SEL0_SH;
hwc[i] = pmc;
if (p4_marked_instr_event(event[i]))
mmcra |= MMCRA_SAMPLE_ENABLE;
}
if (pmc_inuse & 1)
mmcr0 |= MMCR0_PMC1CE;
if (pmc_inuse & 0xfe)
mmcr0 |= MMCR0_PMCjCE;
mmcra |= 0x2000; /* mark only one IOP per PPC instruction */
/* Return MMCRx values */
mmcr[0] = mmcr0;
mmcr[1] = mmcr1;
mmcr[2] = mmcra;
return 0;
}
static void p4_disable_pmc(unsigned int pmc, unsigned long mmcr[])
{
/*
* Setting the PMCxSEL field to 0 disables PMC x.
* (Note that pmc is 0-based here, not 1-based.)
*/
if (pmc <= 1) {
mmcr[0] &= ~(0x1fUL << (MMCR0_PMC1SEL_SH - 7 * pmc));
} else {
mmcr[1] &= ~(0x1fUL << (MMCR1_PMC3SEL_SH - 5 * (pmc - 2)));
if (pmc == 7)
mmcr[2] &= ~(1UL << MMCRA_PMC8SEL0_SH);
}
}
static int p4_generic_events[] = {
[PERF_COUNT_HW_CPU_CYCLES] = 7,
[PERF_COUNT_HW_INSTRUCTIONS] = 0x1001,
[PERF_COUNT_HW_CACHE_REFERENCES] = 0x8c10, /* PM_LD_REF_L1 */
[PERF_COUNT_HW_CACHE_MISSES] = 0x3c10, /* PM_LD_MISS_L1 */
[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x330, /* PM_BR_ISSUED */
[PERF_COUNT_HW_BRANCH_MISSES] = 0x331, /* PM_BR_MPRED_CR */
};
#define C(x) PERF_COUNT_HW_CACHE_##x
/*
* Table of generalized cache-related events.
* 0 means not supported, -1 means nonsensical, other values
* are event codes.
*/
static int power4_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
[C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 0x8c10, 0x3c10 },
[C(OP_WRITE)] = { 0x7c10, 0xc13 },
[C(OP_PREFETCH)] = { 0xc35, 0 },
},
[C(L1I)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 0, 0 },
[C(OP_WRITE)] = { -1, -1 },
[C(OP_PREFETCH)] = { 0, 0 },
},
[C(LL)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 0, 0 },
[C(OP_WRITE)] = { 0, 0 },
[C(OP_PREFETCH)] = { 0xc34, 0 },
},
[C(DTLB)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 0, 0x904 },
[C(OP_WRITE)] = { -1, -1 },
[C(OP_PREFETCH)] = { -1, -1 },
},
[C(ITLB)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 0, 0x900 },
[C(OP_WRITE)] = { -1, -1 },
[C(OP_PREFETCH)] = { -1, -1 },
},
[C(BPU)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 0x330, 0x331 },
[C(OP_WRITE)] = { -1, -1 },
[C(OP_PREFETCH)] = { -1, -1 },
},
[C(NODE)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { -1, -1 },
[C(OP_WRITE)] = { -1, -1 },
[C(OP_PREFETCH)] = { -1, -1 },
},
};
static struct power_pmu power4_pmu = {
.name = "POWER4/4+",
.n_counter = 8,
.max_alternatives = 5,
.add_fields = 0x0000001100005555ul,
.test_adder = 0x0011083300000000ul,
.compute_mmcr = p4_compute_mmcr,
.get_constraint = p4_get_constraint,
.get_alternatives = p4_get_alternatives,
.disable_pmc = p4_disable_pmc,
.n_generic = ARRAY_SIZE(p4_generic_events),
.generic_events = p4_generic_events,
.cache_events = &power4_cache_events,
};
static int __init init_power4_pmu(void)
{
if (!cur_cpu_spec->oprofile_cpu_type ||
strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power4"))
return -ENODEV;
return register_power_pmu(&power4_pmu);
}
early_initcall(init_power4_pmu);