mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-15 13:22:55 +00:00
b9f2c0440d
These have been superceded by the new ->get_sset_count() hook. Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
1620 lines
40 KiB
C
1620 lines
40 KiB
C
/* Silan SC92031 PCI Fast Ethernet Adapter driver
|
|
*
|
|
* Based on vendor drivers:
|
|
* Silan Fast Ethernet Netcard Driver:
|
|
* MODULE_AUTHOR ("gaoyonghong");
|
|
* MODULE_DESCRIPTION ("SILAN Fast Ethernet driver");
|
|
* MODULE_LICENSE("GPL");
|
|
* 8139D Fast Ethernet driver:
|
|
* (C) 2002 by gaoyonghong
|
|
* MODULE_AUTHOR ("gaoyonghong");
|
|
* MODULE_DESCRIPTION ("Rsltek 8139D PCI Fast Ethernet Adapter driver");
|
|
* MODULE_LICENSE("GPL");
|
|
* Both are almost identical and seem to be based on pci-skeleton.c
|
|
*
|
|
* Rewritten for 2.6 by Cesar Eduardo Barros
|
|
*/
|
|
|
|
/* Note about set_mac_address: I don't know how to change the hardware
|
|
* matching, so you need to enable IFF_PROMISC when using it.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/crc32.h>
|
|
|
|
#include <asm/irq.h>
|
|
|
|
#define PCI_VENDOR_ID_SILAN 0x1904
|
|
#define PCI_DEVICE_ID_SILAN_SC92031 0x2031
|
|
#define PCI_DEVICE_ID_SILAN_8139D 0x8139
|
|
|
|
#define SC92031_NAME "sc92031"
|
|
#define SC92031_DESCRIPTION "Silan SC92031 PCI Fast Ethernet Adapter driver"
|
|
#define SC92031_VERSION "2.0c"
|
|
|
|
/* BAR 0 is MMIO, BAR 1 is PIO */
|
|
#ifndef SC92031_USE_BAR
|
|
#define SC92031_USE_BAR 0
|
|
#endif
|
|
|
|
/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast). */
|
|
static int multicast_filter_limit = 64;
|
|
module_param(multicast_filter_limit, int, 0);
|
|
MODULE_PARM_DESC(multicast_filter_limit,
|
|
"Maximum number of filtered multicast addresses");
|
|
|
|
static int media;
|
|
module_param(media, int, 0);
|
|
MODULE_PARM_DESC(media, "Media type (0x00 = autodetect,"
|
|
" 0x01 = 10M half, 0x02 = 10M full,"
|
|
" 0x04 = 100M half, 0x08 = 100M full)");
|
|
|
|
/* Size of the in-memory receive ring. */
|
|
#define RX_BUF_LEN_IDX 3 /* 0==8K, 1==16K, 2==32K, 3==64K ,4==128K*/
|
|
#define RX_BUF_LEN (8192 << RX_BUF_LEN_IDX)
|
|
|
|
/* Number of Tx descriptor registers. */
|
|
#define NUM_TX_DESC 4
|
|
|
|
/* max supported ethernet frame size -- must be at least (dev->mtu+14+4).*/
|
|
#define MAX_ETH_FRAME_SIZE 1536
|
|
|
|
/* Size of the Tx bounce buffers -- must be at least (dev->mtu+14+4). */
|
|
#define TX_BUF_SIZE MAX_ETH_FRAME_SIZE
|
|
#define TX_BUF_TOT_LEN (TX_BUF_SIZE * NUM_TX_DESC)
|
|
|
|
/* The following settings are log_2(bytes)-4: 0 == 16 bytes .. 6==1024, 7==end of packet. */
|
|
#define RX_FIFO_THRESH 7 /* Rx buffer level before first PCI xfer. */
|
|
|
|
/* Time in jiffies before concluding the transmitter is hung. */
|
|
#define TX_TIMEOUT (4*HZ)
|
|
|
|
#define SILAN_STATS_NUM 2 /* number of ETHTOOL_GSTATS */
|
|
|
|
/* media options */
|
|
#define AUTOSELECT 0x00
|
|
#define M10_HALF 0x01
|
|
#define M10_FULL 0x02
|
|
#define M100_HALF 0x04
|
|
#define M100_FULL 0x08
|
|
|
|
/* Symbolic offsets to registers. */
|
|
enum silan_registers {
|
|
Config0 = 0x00, // Config0
|
|
Config1 = 0x04, // Config1
|
|
RxBufWPtr = 0x08, // Rx buffer writer poiter
|
|
IntrStatus = 0x0C, // Interrupt status
|
|
IntrMask = 0x10, // Interrupt mask
|
|
RxbufAddr = 0x14, // Rx buffer start address
|
|
RxBufRPtr = 0x18, // Rx buffer read pointer
|
|
Txstatusall = 0x1C, // Transmit status of all descriptors
|
|
TxStatus0 = 0x20, // Transmit status (Four 32bit registers).
|
|
TxAddr0 = 0x30, // Tx descriptors (also four 32bit).
|
|
RxConfig = 0x40, // Rx configuration
|
|
MAC0 = 0x44, // Ethernet hardware address.
|
|
MAR0 = 0x4C, // Multicast filter.
|
|
RxStatus0 = 0x54, // Rx status
|
|
TxConfig = 0x5C, // Tx configuration
|
|
PhyCtrl = 0x60, // physical control
|
|
FlowCtrlConfig = 0x64, // flow control
|
|
Miicmd0 = 0x68, // Mii command0 register
|
|
Miicmd1 = 0x6C, // Mii command1 register
|
|
Miistatus = 0x70, // Mii status register
|
|
Timercnt = 0x74, // Timer counter register
|
|
TimerIntr = 0x78, // Timer interrupt register
|
|
PMConfig = 0x7C, // Power Manager configuration
|
|
CRC0 = 0x80, // Power Manager CRC ( Two 32bit regisers)
|
|
Wakeup0 = 0x88, // power Manager wakeup( Eight 64bit regiser)
|
|
LSBCRC0 = 0xC8, // power Manager LSBCRC(Two 32bit regiser)
|
|
TestD0 = 0xD0,
|
|
TestD4 = 0xD4,
|
|
TestD8 = 0xD8,
|
|
};
|
|
|
|
#define MII_BMCR 0 // Basic mode control register
|
|
#define MII_BMSR 1 // Basic mode status register
|
|
#define MII_JAB 16
|
|
#define MII_OutputStatus 24
|
|
|
|
#define BMCR_FULLDPLX 0x0100 // Full duplex
|
|
#define BMCR_ANRESTART 0x0200 // Auto negotiation restart
|
|
#define BMCR_ANENABLE 0x1000 // Enable auto negotiation
|
|
#define BMCR_SPEED100 0x2000 // Select 100Mbps
|
|
#define BMSR_LSTATUS 0x0004 // Link status
|
|
#define PHY_16_JAB_ENB 0x1000
|
|
#define PHY_16_PORT_ENB 0x1
|
|
|
|
enum IntrStatusBits {
|
|
LinkFail = 0x80000000,
|
|
LinkOK = 0x40000000,
|
|
TimeOut = 0x20000000,
|
|
RxOverflow = 0x0040,
|
|
RxOK = 0x0020,
|
|
TxOK = 0x0001,
|
|
IntrBits = LinkFail|LinkOK|TimeOut|RxOverflow|RxOK|TxOK,
|
|
};
|
|
|
|
enum TxStatusBits {
|
|
TxCarrierLost = 0x20000000,
|
|
TxAborted = 0x10000000,
|
|
TxOutOfWindow = 0x08000000,
|
|
TxNccShift = 22,
|
|
EarlyTxThresShift = 16,
|
|
TxStatOK = 0x8000,
|
|
TxUnderrun = 0x4000,
|
|
TxOwn = 0x2000,
|
|
};
|
|
|
|
enum RxStatusBits {
|
|
RxStatesOK = 0x80000,
|
|
RxBadAlign = 0x40000,
|
|
RxHugeFrame = 0x20000,
|
|
RxSmallFrame = 0x10000,
|
|
RxCRCOK = 0x8000,
|
|
RxCrlFrame = 0x4000,
|
|
Rx_Broadcast = 0x2000,
|
|
Rx_Multicast = 0x1000,
|
|
RxAddrMatch = 0x0800,
|
|
MiiErr = 0x0400,
|
|
};
|
|
|
|
enum RxConfigBits {
|
|
RxFullDx = 0x80000000,
|
|
RxEnb = 0x40000000,
|
|
RxSmall = 0x20000000,
|
|
RxHuge = 0x10000000,
|
|
RxErr = 0x08000000,
|
|
RxAllphys = 0x04000000,
|
|
RxMulticast = 0x02000000,
|
|
RxBroadcast = 0x01000000,
|
|
RxLoopBack = (1 << 23) | (1 << 22),
|
|
LowThresholdShift = 12,
|
|
HighThresholdShift = 2,
|
|
};
|
|
|
|
enum TxConfigBits {
|
|
TxFullDx = 0x80000000,
|
|
TxEnb = 0x40000000,
|
|
TxEnbPad = 0x20000000,
|
|
TxEnbHuge = 0x10000000,
|
|
TxEnbFCS = 0x08000000,
|
|
TxNoBackOff = 0x04000000,
|
|
TxEnbPrem = 0x02000000,
|
|
TxCareLostCrs = 0x1000000,
|
|
TxExdCollNum = 0xf00000,
|
|
TxDataRate = 0x80000,
|
|
};
|
|
|
|
enum PhyCtrlconfigbits {
|
|
PhyCtrlAne = 0x80000000,
|
|
PhyCtrlSpd100 = 0x40000000,
|
|
PhyCtrlSpd10 = 0x20000000,
|
|
PhyCtrlPhyBaseAddr = 0x1f000000,
|
|
PhyCtrlDux = 0x800000,
|
|
PhyCtrlReset = 0x400000,
|
|
};
|
|
|
|
enum FlowCtrlConfigBits {
|
|
FlowCtrlFullDX = 0x80000000,
|
|
FlowCtrlEnb = 0x40000000,
|
|
};
|
|
|
|
enum Config0Bits {
|
|
Cfg0_Reset = 0x80000000,
|
|
Cfg0_Anaoff = 0x40000000,
|
|
Cfg0_LDPS = 0x20000000,
|
|
};
|
|
|
|
enum Config1Bits {
|
|
Cfg1_EarlyRx = 1 << 31,
|
|
Cfg1_EarlyTx = 1 << 30,
|
|
|
|
//rx buffer size
|
|
Cfg1_Rcv8K = 0x0,
|
|
Cfg1_Rcv16K = 0x1,
|
|
Cfg1_Rcv32K = 0x3,
|
|
Cfg1_Rcv64K = 0x7,
|
|
Cfg1_Rcv128K = 0xf,
|
|
};
|
|
|
|
enum MiiCmd0Bits {
|
|
Mii_Divider = 0x20000000,
|
|
Mii_WRITE = 0x400000,
|
|
Mii_READ = 0x200000,
|
|
Mii_SCAN = 0x100000,
|
|
Mii_Tamod = 0x80000,
|
|
Mii_Drvmod = 0x40000,
|
|
Mii_mdc = 0x20000,
|
|
Mii_mdoen = 0x10000,
|
|
Mii_mdo = 0x8000,
|
|
Mii_mdi = 0x4000,
|
|
};
|
|
|
|
enum MiiStatusBits {
|
|
Mii_StatusBusy = 0x80000000,
|
|
};
|
|
|
|
enum PMConfigBits {
|
|
PM_Enable = 1 << 31,
|
|
PM_LongWF = 1 << 30,
|
|
PM_Magic = 1 << 29,
|
|
PM_LANWake = 1 << 28,
|
|
PM_LWPTN = (1 << 27 | 1<< 26),
|
|
PM_LinkUp = 1 << 25,
|
|
PM_WakeUp = 1 << 24,
|
|
};
|
|
|
|
/* Locking rules:
|
|
* priv->lock protects most of the fields of priv and most of the
|
|
* hardware registers. It does not have to protect against softirqs
|
|
* between sc92031_disable_interrupts and sc92031_enable_interrupts;
|
|
* it also does not need to be used in ->open and ->stop while the
|
|
* device interrupts are off.
|
|
* Not having to protect against softirqs is very useful due to heavy
|
|
* use of mdelay() at _sc92031_reset.
|
|
* Functions prefixed with _sc92031_ must be called with the lock held;
|
|
* functions prefixed with sc92031_ must be called without the lock held.
|
|
* Use mmiowb() before unlocking if the hardware was written to.
|
|
*/
|
|
|
|
/* Locking rules for the interrupt:
|
|
* - the interrupt and the tasklet never run at the same time
|
|
* - neither run between sc92031_disable_interrupts and
|
|
* sc92031_enable_interrupt
|
|
*/
|
|
|
|
struct sc92031_priv {
|
|
spinlock_t lock;
|
|
/* iomap.h cookie */
|
|
void __iomem *port_base;
|
|
/* pci device structure */
|
|
struct pci_dev *pdev;
|
|
/* tasklet */
|
|
struct tasklet_struct tasklet;
|
|
|
|
/* CPU address of rx ring */
|
|
void *rx_ring;
|
|
/* PCI address of rx ring */
|
|
dma_addr_t rx_ring_dma_addr;
|
|
/* PCI address of rx ring read pointer */
|
|
dma_addr_t rx_ring_tail;
|
|
|
|
/* tx ring write index */
|
|
unsigned tx_head;
|
|
/* tx ring read index */
|
|
unsigned tx_tail;
|
|
/* CPU address of tx bounce buffer */
|
|
void *tx_bufs;
|
|
/* PCI address of tx bounce buffer */
|
|
dma_addr_t tx_bufs_dma_addr;
|
|
|
|
/* copies of some hardware registers */
|
|
u32 intr_status;
|
|
atomic_t intr_mask;
|
|
u32 rx_config;
|
|
u32 tx_config;
|
|
u32 pm_config;
|
|
|
|
/* copy of some flags from dev->flags */
|
|
unsigned int mc_flags;
|
|
|
|
/* for ETHTOOL_GSTATS */
|
|
u64 tx_timeouts;
|
|
u64 rx_loss;
|
|
|
|
/* for dev->get_stats */
|
|
long rx_value;
|
|
struct net_device_stats stats;
|
|
};
|
|
|
|
/* I don't know which registers can be safely read; however, I can guess
|
|
* MAC0 is one of them. */
|
|
static inline void _sc92031_dummy_read(void __iomem *port_base)
|
|
{
|
|
ioread32(port_base + MAC0);
|
|
}
|
|
|
|
static u32 _sc92031_mii_wait(void __iomem *port_base)
|
|
{
|
|
u32 mii_status;
|
|
|
|
do {
|
|
udelay(10);
|
|
mii_status = ioread32(port_base + Miistatus);
|
|
} while (mii_status & Mii_StatusBusy);
|
|
|
|
return mii_status;
|
|
}
|
|
|
|
static u32 _sc92031_mii_cmd(void __iomem *port_base, u32 cmd0, u32 cmd1)
|
|
{
|
|
iowrite32(Mii_Divider, port_base + Miicmd0);
|
|
|
|
_sc92031_mii_wait(port_base);
|
|
|
|
iowrite32(cmd1, port_base + Miicmd1);
|
|
iowrite32(Mii_Divider | cmd0, port_base + Miicmd0);
|
|
|
|
return _sc92031_mii_wait(port_base);
|
|
}
|
|
|
|
static void _sc92031_mii_scan(void __iomem *port_base)
|
|
{
|
|
_sc92031_mii_cmd(port_base, Mii_SCAN, 0x1 << 6);
|
|
}
|
|
|
|
static u16 _sc92031_mii_read(void __iomem *port_base, unsigned reg)
|
|
{
|
|
return _sc92031_mii_cmd(port_base, Mii_READ, reg << 6) >> 13;
|
|
}
|
|
|
|
static void _sc92031_mii_write(void __iomem *port_base, unsigned reg, u16 val)
|
|
{
|
|
_sc92031_mii_cmd(port_base, Mii_WRITE, (reg << 6) | ((u32)val << 11));
|
|
}
|
|
|
|
static void sc92031_disable_interrupts(struct net_device *dev)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
|
|
/* tell the tasklet/interrupt not to enable interrupts */
|
|
atomic_set(&priv->intr_mask, 0);
|
|
wmb();
|
|
|
|
/* stop interrupts */
|
|
iowrite32(0, port_base + IntrMask);
|
|
_sc92031_dummy_read(port_base);
|
|
mmiowb();
|
|
|
|
/* wait for any concurrent interrupt/tasklet to finish */
|
|
synchronize_irq(dev->irq);
|
|
tasklet_disable(&priv->tasklet);
|
|
}
|
|
|
|
static void sc92031_enable_interrupts(struct net_device *dev)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
|
|
tasklet_enable(&priv->tasklet);
|
|
|
|
atomic_set(&priv->intr_mask, IntrBits);
|
|
wmb();
|
|
|
|
iowrite32(IntrBits, port_base + IntrMask);
|
|
mmiowb();
|
|
}
|
|
|
|
static void _sc92031_disable_tx_rx(struct net_device *dev)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
|
|
priv->rx_config &= ~RxEnb;
|
|
priv->tx_config &= ~TxEnb;
|
|
iowrite32(priv->rx_config, port_base + RxConfig);
|
|
iowrite32(priv->tx_config, port_base + TxConfig);
|
|
}
|
|
|
|
static void _sc92031_enable_tx_rx(struct net_device *dev)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
|
|
priv->rx_config |= RxEnb;
|
|
priv->tx_config |= TxEnb;
|
|
iowrite32(priv->rx_config, port_base + RxConfig);
|
|
iowrite32(priv->tx_config, port_base + TxConfig);
|
|
}
|
|
|
|
static void _sc92031_tx_clear(struct net_device *dev)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
|
|
while (priv->tx_head - priv->tx_tail > 0) {
|
|
priv->tx_tail++;
|
|
priv->stats.tx_dropped++;
|
|
}
|
|
priv->tx_head = priv->tx_tail = 0;
|
|
}
|
|
|
|
static void _sc92031_set_mar(struct net_device *dev)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
u32 mar0 = 0, mar1 = 0;
|
|
|
|
if ((dev->flags & IFF_PROMISC)
|
|
|| dev->mc_count > multicast_filter_limit
|
|
|| (dev->flags & IFF_ALLMULTI))
|
|
mar0 = mar1 = 0xffffffff;
|
|
else if (dev->flags & IFF_MULTICAST) {
|
|
struct dev_mc_list *mc_list;
|
|
|
|
for (mc_list = dev->mc_list; mc_list; mc_list = mc_list->next) {
|
|
u32 crc;
|
|
unsigned bit = 0;
|
|
|
|
crc = ~ether_crc(ETH_ALEN, mc_list->dmi_addr);
|
|
crc >>= 24;
|
|
|
|
if (crc & 0x01) bit |= 0x02;
|
|
if (crc & 0x02) bit |= 0x01;
|
|
if (crc & 0x10) bit |= 0x20;
|
|
if (crc & 0x20) bit |= 0x10;
|
|
if (crc & 0x40) bit |= 0x08;
|
|
if (crc & 0x80) bit |= 0x04;
|
|
|
|
if (bit > 31)
|
|
mar0 |= 0x1 << (bit - 32);
|
|
else
|
|
mar1 |= 0x1 << bit;
|
|
}
|
|
}
|
|
|
|
iowrite32(mar0, port_base + MAR0);
|
|
iowrite32(mar1, port_base + MAR0 + 4);
|
|
}
|
|
|
|
static void _sc92031_set_rx_config(struct net_device *dev)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
unsigned int old_mc_flags;
|
|
u32 rx_config_bits = 0;
|
|
|
|
old_mc_flags = priv->mc_flags;
|
|
|
|
if (dev->flags & IFF_PROMISC)
|
|
rx_config_bits |= RxSmall | RxHuge | RxErr | RxBroadcast
|
|
| RxMulticast | RxAllphys;
|
|
|
|
if (dev->flags & (IFF_ALLMULTI | IFF_MULTICAST))
|
|
rx_config_bits |= RxMulticast;
|
|
|
|
if (dev->flags & IFF_BROADCAST)
|
|
rx_config_bits |= RxBroadcast;
|
|
|
|
priv->rx_config &= ~(RxSmall | RxHuge | RxErr | RxBroadcast
|
|
| RxMulticast | RxAllphys);
|
|
priv->rx_config |= rx_config_bits;
|
|
|
|
priv->mc_flags = dev->flags & (IFF_PROMISC | IFF_ALLMULTI
|
|
| IFF_MULTICAST | IFF_BROADCAST);
|
|
|
|
if (netif_carrier_ok(dev) && priv->mc_flags != old_mc_flags)
|
|
iowrite32(priv->rx_config, port_base + RxConfig);
|
|
}
|
|
|
|
static bool _sc92031_check_media(struct net_device *dev)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
u16 bmsr;
|
|
|
|
bmsr = _sc92031_mii_read(port_base, MII_BMSR);
|
|
rmb();
|
|
if (bmsr & BMSR_LSTATUS) {
|
|
bool speed_100, duplex_full;
|
|
u32 flow_ctrl_config = 0;
|
|
u16 output_status = _sc92031_mii_read(port_base,
|
|
MII_OutputStatus);
|
|
_sc92031_mii_scan(port_base);
|
|
|
|
speed_100 = output_status & 0x2;
|
|
duplex_full = output_status & 0x4;
|
|
|
|
/* Initial Tx/Rx configuration */
|
|
priv->rx_config = (0x40 << LowThresholdShift) | (0x1c0 << HighThresholdShift);
|
|
priv->tx_config = 0x48800000;
|
|
|
|
/* NOTE: vendor driver had dead code here to enable tx padding */
|
|
|
|
if (!speed_100)
|
|
priv->tx_config |= 0x80000;
|
|
|
|
// configure rx mode
|
|
_sc92031_set_rx_config(dev);
|
|
|
|
if (duplex_full) {
|
|
priv->rx_config |= RxFullDx;
|
|
priv->tx_config |= TxFullDx;
|
|
flow_ctrl_config = FlowCtrlFullDX | FlowCtrlEnb;
|
|
} else {
|
|
priv->rx_config &= ~RxFullDx;
|
|
priv->tx_config &= ~TxFullDx;
|
|
}
|
|
|
|
_sc92031_set_mar(dev);
|
|
_sc92031_set_rx_config(dev);
|
|
_sc92031_enable_tx_rx(dev);
|
|
iowrite32(flow_ctrl_config, port_base + FlowCtrlConfig);
|
|
|
|
netif_carrier_on(dev);
|
|
|
|
if (printk_ratelimit())
|
|
printk(KERN_INFO "%s: link up, %sMbps, %s-duplex\n",
|
|
dev->name,
|
|
speed_100 ? "100" : "10",
|
|
duplex_full ? "full" : "half");
|
|
return true;
|
|
} else {
|
|
_sc92031_mii_scan(port_base);
|
|
|
|
netif_carrier_off(dev);
|
|
|
|
_sc92031_disable_tx_rx(dev);
|
|
|
|
if (printk_ratelimit())
|
|
printk(KERN_INFO "%s: link down\n", dev->name);
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static void _sc92031_phy_reset(struct net_device *dev)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
u32 phy_ctrl;
|
|
|
|
phy_ctrl = ioread32(port_base + PhyCtrl);
|
|
phy_ctrl &= ~(PhyCtrlDux | PhyCtrlSpd100 | PhyCtrlSpd10);
|
|
phy_ctrl |= PhyCtrlAne | PhyCtrlReset;
|
|
|
|
switch (media) {
|
|
default:
|
|
case AUTOSELECT:
|
|
phy_ctrl |= PhyCtrlDux | PhyCtrlSpd100 | PhyCtrlSpd10;
|
|
break;
|
|
case M10_HALF:
|
|
phy_ctrl |= PhyCtrlSpd10;
|
|
break;
|
|
case M10_FULL:
|
|
phy_ctrl |= PhyCtrlDux | PhyCtrlSpd10;
|
|
break;
|
|
case M100_HALF:
|
|
phy_ctrl |= PhyCtrlSpd100;
|
|
break;
|
|
case M100_FULL:
|
|
phy_ctrl |= PhyCtrlDux | PhyCtrlSpd100;
|
|
break;
|
|
}
|
|
|
|
iowrite32(phy_ctrl, port_base + PhyCtrl);
|
|
mdelay(10);
|
|
|
|
phy_ctrl &= ~PhyCtrlReset;
|
|
iowrite32(phy_ctrl, port_base + PhyCtrl);
|
|
mdelay(1);
|
|
|
|
_sc92031_mii_write(port_base, MII_JAB,
|
|
PHY_16_JAB_ENB | PHY_16_PORT_ENB);
|
|
_sc92031_mii_scan(port_base);
|
|
|
|
netif_carrier_off(dev);
|
|
netif_stop_queue(dev);
|
|
}
|
|
|
|
static void _sc92031_reset(struct net_device *dev)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
|
|
/* disable PM */
|
|
iowrite32(0, port_base + PMConfig);
|
|
|
|
/* soft reset the chip */
|
|
iowrite32(Cfg0_Reset, port_base + Config0);
|
|
mdelay(200);
|
|
|
|
iowrite32(0, port_base + Config0);
|
|
mdelay(10);
|
|
|
|
/* disable interrupts */
|
|
iowrite32(0, port_base + IntrMask);
|
|
|
|
/* clear multicast address */
|
|
iowrite32(0, port_base + MAR0);
|
|
iowrite32(0, port_base + MAR0 + 4);
|
|
|
|
/* init rx ring */
|
|
iowrite32(priv->rx_ring_dma_addr, port_base + RxbufAddr);
|
|
priv->rx_ring_tail = priv->rx_ring_dma_addr;
|
|
|
|
/* init tx ring */
|
|
_sc92031_tx_clear(dev);
|
|
|
|
/* clear old register values */
|
|
priv->intr_status = 0;
|
|
atomic_set(&priv->intr_mask, 0);
|
|
priv->rx_config = 0;
|
|
priv->tx_config = 0;
|
|
priv->mc_flags = 0;
|
|
|
|
/* configure rx buffer size */
|
|
/* NOTE: vendor driver had dead code here to enable early tx/rx */
|
|
iowrite32(Cfg1_Rcv64K, port_base + Config1);
|
|
|
|
_sc92031_phy_reset(dev);
|
|
_sc92031_check_media(dev);
|
|
|
|
/* calculate rx fifo overflow */
|
|
priv->rx_value = 0;
|
|
|
|
/* enable PM */
|
|
iowrite32(priv->pm_config, port_base + PMConfig);
|
|
|
|
/* clear intr register */
|
|
ioread32(port_base + IntrStatus);
|
|
}
|
|
|
|
static void _sc92031_tx_tasklet(struct net_device *dev)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
|
|
unsigned old_tx_tail;
|
|
unsigned entry;
|
|
u32 tx_status;
|
|
|
|
old_tx_tail = priv->tx_tail;
|
|
while (priv->tx_head - priv->tx_tail > 0) {
|
|
entry = priv->tx_tail % NUM_TX_DESC;
|
|
tx_status = ioread32(port_base + TxStatus0 + entry * 4);
|
|
|
|
if (!(tx_status & (TxStatOK | TxUnderrun | TxAborted)))
|
|
break;
|
|
|
|
priv->tx_tail++;
|
|
|
|
if (tx_status & TxStatOK) {
|
|
priv->stats.tx_bytes += tx_status & 0x1fff;
|
|
priv->stats.tx_packets++;
|
|
/* Note: TxCarrierLost is always asserted at 100mbps. */
|
|
priv->stats.collisions += (tx_status >> 22) & 0xf;
|
|
}
|
|
|
|
if (tx_status & (TxOutOfWindow | TxAborted)) {
|
|
priv->stats.tx_errors++;
|
|
|
|
if (tx_status & TxAborted)
|
|
priv->stats.tx_aborted_errors++;
|
|
|
|
if (tx_status & TxCarrierLost)
|
|
priv->stats.tx_carrier_errors++;
|
|
|
|
if (tx_status & TxOutOfWindow)
|
|
priv->stats.tx_window_errors++;
|
|
}
|
|
|
|
if (tx_status & TxUnderrun)
|
|
priv->stats.tx_fifo_errors++;
|
|
}
|
|
|
|
if (priv->tx_tail != old_tx_tail)
|
|
if (netif_queue_stopped(dev))
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
static void _sc92031_rx_tasklet_error(u32 rx_status,
|
|
struct sc92031_priv *priv, unsigned rx_size)
|
|
{
|
|
if(rx_size > (MAX_ETH_FRAME_SIZE + 4) || rx_size < 16) {
|
|
priv->stats.rx_errors++;
|
|
priv->stats.rx_length_errors++;
|
|
}
|
|
|
|
if (!(rx_status & RxStatesOK)) {
|
|
priv->stats.rx_errors++;
|
|
|
|
if (rx_status & (RxHugeFrame | RxSmallFrame))
|
|
priv->stats.rx_length_errors++;
|
|
|
|
if (rx_status & RxBadAlign)
|
|
priv->stats.rx_frame_errors++;
|
|
|
|
if (!(rx_status & RxCRCOK))
|
|
priv->stats.rx_crc_errors++;
|
|
} else
|
|
priv->rx_loss++;
|
|
}
|
|
|
|
static void _sc92031_rx_tasklet(struct net_device *dev)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
|
|
dma_addr_t rx_ring_head;
|
|
unsigned rx_len;
|
|
unsigned rx_ring_offset;
|
|
void *rx_ring = priv->rx_ring;
|
|
|
|
rx_ring_head = ioread32(port_base + RxBufWPtr);
|
|
rmb();
|
|
|
|
/* rx_ring_head is only 17 bits in the RxBufWPtr register.
|
|
* we need to change it to 32 bits physical address
|
|
*/
|
|
rx_ring_head &= (dma_addr_t)(RX_BUF_LEN - 1);
|
|
rx_ring_head |= priv->rx_ring_dma_addr & ~(dma_addr_t)(RX_BUF_LEN - 1);
|
|
if (rx_ring_head < priv->rx_ring_dma_addr)
|
|
rx_ring_head += RX_BUF_LEN;
|
|
|
|
if (rx_ring_head >= priv->rx_ring_tail)
|
|
rx_len = rx_ring_head - priv->rx_ring_tail;
|
|
else
|
|
rx_len = RX_BUF_LEN - (priv->rx_ring_tail - rx_ring_head);
|
|
|
|
if (!rx_len)
|
|
return;
|
|
|
|
if (unlikely(rx_len > RX_BUF_LEN)) {
|
|
if (printk_ratelimit())
|
|
printk(KERN_ERR "%s: rx packets length > rx buffer\n",
|
|
dev->name);
|
|
return;
|
|
}
|
|
|
|
rx_ring_offset = (priv->rx_ring_tail - priv->rx_ring_dma_addr) % RX_BUF_LEN;
|
|
|
|
while (rx_len) {
|
|
u32 rx_status;
|
|
unsigned rx_size, rx_size_align, pkt_size;
|
|
struct sk_buff *skb;
|
|
|
|
rx_status = le32_to_cpup((__le32 *)(rx_ring + rx_ring_offset));
|
|
rmb();
|
|
|
|
rx_size = rx_status >> 20;
|
|
rx_size_align = (rx_size + 3) & ~3; // for 4 bytes aligned
|
|
pkt_size = rx_size - 4; // Omit the four octet CRC from the length.
|
|
|
|
rx_ring_offset = (rx_ring_offset + 4) % RX_BUF_LEN;
|
|
|
|
if (unlikely(rx_status == 0
|
|
|| rx_size > (MAX_ETH_FRAME_SIZE + 4)
|
|
|| rx_size < 16
|
|
|| !(rx_status & RxStatesOK))) {
|
|
_sc92031_rx_tasklet_error(rx_status, priv, rx_size);
|
|
break;
|
|
}
|
|
|
|
if (unlikely(rx_size_align + 4 > rx_len)) {
|
|
if (printk_ratelimit())
|
|
printk(KERN_ERR "%s: rx_len is too small\n", dev->name);
|
|
break;
|
|
}
|
|
|
|
rx_len -= rx_size_align + 4;
|
|
|
|
skb = dev_alloc_skb(pkt_size + NET_IP_ALIGN);
|
|
if (unlikely(!skb)) {
|
|
if (printk_ratelimit())
|
|
printk(KERN_ERR "%s: Couldn't allocate a skb_buff for a packet of size %u\n",
|
|
dev->name, pkt_size);
|
|
goto next;
|
|
}
|
|
|
|
skb_reserve(skb, NET_IP_ALIGN);
|
|
|
|
if ((rx_ring_offset + pkt_size) > RX_BUF_LEN) {
|
|
memcpy(skb_put(skb, RX_BUF_LEN - rx_ring_offset),
|
|
rx_ring + rx_ring_offset, RX_BUF_LEN - rx_ring_offset);
|
|
memcpy(skb_put(skb, pkt_size - (RX_BUF_LEN - rx_ring_offset)),
|
|
rx_ring, pkt_size - (RX_BUF_LEN - rx_ring_offset));
|
|
} else {
|
|
memcpy(skb_put(skb, pkt_size), rx_ring + rx_ring_offset, pkt_size);
|
|
}
|
|
|
|
skb->protocol = eth_type_trans(skb, dev);
|
|
dev->last_rx = jiffies;
|
|
netif_rx(skb);
|
|
|
|
priv->stats.rx_bytes += pkt_size;
|
|
priv->stats.rx_packets++;
|
|
|
|
if (rx_status & Rx_Multicast)
|
|
priv->stats.multicast++;
|
|
|
|
next:
|
|
rx_ring_offset = (rx_ring_offset + rx_size_align) % RX_BUF_LEN;
|
|
}
|
|
mb();
|
|
|
|
priv->rx_ring_tail = rx_ring_head;
|
|
iowrite32(priv->rx_ring_tail, port_base + RxBufRPtr);
|
|
}
|
|
|
|
static void _sc92031_link_tasklet(struct net_device *dev)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
|
|
if (_sc92031_check_media(dev))
|
|
netif_wake_queue(dev);
|
|
else {
|
|
netif_stop_queue(dev);
|
|
priv->stats.tx_carrier_errors++;
|
|
}
|
|
}
|
|
|
|
static void sc92031_tasklet(unsigned long data)
|
|
{
|
|
struct net_device *dev = (struct net_device *)data;
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
u32 intr_status, intr_mask;
|
|
|
|
intr_status = priv->intr_status;
|
|
|
|
spin_lock(&priv->lock);
|
|
|
|
if (unlikely(!netif_running(dev)))
|
|
goto out;
|
|
|
|
if (intr_status & TxOK)
|
|
_sc92031_tx_tasklet(dev);
|
|
|
|
if (intr_status & RxOK)
|
|
_sc92031_rx_tasklet(dev);
|
|
|
|
if (intr_status & RxOverflow)
|
|
priv->stats.rx_errors++;
|
|
|
|
if (intr_status & TimeOut) {
|
|
priv->stats.rx_errors++;
|
|
priv->stats.rx_length_errors++;
|
|
}
|
|
|
|
if (intr_status & (LinkFail | LinkOK))
|
|
_sc92031_link_tasklet(dev);
|
|
|
|
out:
|
|
intr_mask = atomic_read(&priv->intr_mask);
|
|
rmb();
|
|
|
|
iowrite32(intr_mask, port_base + IntrMask);
|
|
mmiowb();
|
|
|
|
spin_unlock(&priv->lock);
|
|
}
|
|
|
|
static irqreturn_t sc92031_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct net_device *dev = dev_id;
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
u32 intr_status, intr_mask;
|
|
|
|
/* mask interrupts before clearing IntrStatus */
|
|
iowrite32(0, port_base + IntrMask);
|
|
_sc92031_dummy_read(port_base);
|
|
|
|
intr_status = ioread32(port_base + IntrStatus);
|
|
if (unlikely(intr_status == 0xffffffff))
|
|
return IRQ_NONE; // hardware has gone missing
|
|
|
|
intr_status &= IntrBits;
|
|
if (!intr_status)
|
|
goto out_none;
|
|
|
|
priv->intr_status = intr_status;
|
|
tasklet_schedule(&priv->tasklet);
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
out_none:
|
|
intr_mask = atomic_read(&priv->intr_mask);
|
|
rmb();
|
|
|
|
iowrite32(intr_mask, port_base + IntrMask);
|
|
mmiowb();
|
|
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
static struct net_device_stats *sc92031_get_stats(struct net_device *dev)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
|
|
// FIXME I do not understand what is this trying to do.
|
|
if (netif_running(dev)) {
|
|
int temp;
|
|
|
|
spin_lock_bh(&priv->lock);
|
|
|
|
/* Update the error count. */
|
|
temp = (ioread32(port_base + RxStatus0) >> 16) & 0xffff;
|
|
|
|
if (temp == 0xffff) {
|
|
priv->rx_value += temp;
|
|
priv->stats.rx_fifo_errors = priv->rx_value;
|
|
} else {
|
|
priv->stats.rx_fifo_errors = temp + priv->rx_value;
|
|
}
|
|
|
|
spin_unlock_bh(&priv->lock);
|
|
}
|
|
|
|
return &priv->stats;
|
|
}
|
|
|
|
static int sc92031_start_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
int err = 0;
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
|
|
unsigned len;
|
|
unsigned entry;
|
|
u32 tx_status;
|
|
|
|
if (unlikely(skb->len > TX_BUF_SIZE)) {
|
|
err = -EMSGSIZE;
|
|
priv->stats.tx_dropped++;
|
|
goto out;
|
|
}
|
|
|
|
spin_lock(&priv->lock);
|
|
|
|
if (unlikely(!netif_carrier_ok(dev))) {
|
|
err = -ENOLINK;
|
|
priv->stats.tx_dropped++;
|
|
goto out_unlock;
|
|
}
|
|
|
|
BUG_ON(priv->tx_head - priv->tx_tail >= NUM_TX_DESC);
|
|
|
|
entry = priv->tx_head++ % NUM_TX_DESC;
|
|
|
|
skb_copy_and_csum_dev(skb, priv->tx_bufs + entry * TX_BUF_SIZE);
|
|
|
|
len = skb->len;
|
|
if (unlikely(len < ETH_ZLEN)) {
|
|
memset(priv->tx_bufs + entry * TX_BUF_SIZE + len,
|
|
0, ETH_ZLEN - len);
|
|
len = ETH_ZLEN;
|
|
}
|
|
|
|
wmb();
|
|
|
|
if (len < 100)
|
|
tx_status = len;
|
|
else if (len < 300)
|
|
tx_status = 0x30000 | len;
|
|
else
|
|
tx_status = 0x50000 | len;
|
|
|
|
iowrite32(priv->tx_bufs_dma_addr + entry * TX_BUF_SIZE,
|
|
port_base + TxAddr0 + entry * 4);
|
|
iowrite32(tx_status, port_base + TxStatus0 + entry * 4);
|
|
mmiowb();
|
|
|
|
dev->trans_start = jiffies;
|
|
|
|
if (priv->tx_head - priv->tx_tail >= NUM_TX_DESC)
|
|
netif_stop_queue(dev);
|
|
|
|
out_unlock:
|
|
spin_unlock(&priv->lock);
|
|
|
|
out:
|
|
dev_kfree_skb(skb);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int sc92031_open(struct net_device *dev)
|
|
{
|
|
int err;
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
struct pci_dev *pdev = priv->pdev;
|
|
|
|
priv->rx_ring = pci_alloc_consistent(pdev, RX_BUF_LEN,
|
|
&priv->rx_ring_dma_addr);
|
|
if (unlikely(!priv->rx_ring)) {
|
|
err = -ENOMEM;
|
|
goto out_alloc_rx_ring;
|
|
}
|
|
|
|
priv->tx_bufs = pci_alloc_consistent(pdev, TX_BUF_TOT_LEN,
|
|
&priv->tx_bufs_dma_addr);
|
|
if (unlikely(!priv->tx_bufs)) {
|
|
err = -ENOMEM;
|
|
goto out_alloc_tx_bufs;
|
|
}
|
|
priv->tx_head = priv->tx_tail = 0;
|
|
|
|
err = request_irq(pdev->irq, sc92031_interrupt,
|
|
IRQF_SHARED, dev->name, dev);
|
|
if (unlikely(err < 0))
|
|
goto out_request_irq;
|
|
|
|
priv->pm_config = 0;
|
|
|
|
/* Interrupts already disabled by sc92031_stop or sc92031_probe */
|
|
spin_lock_bh(&priv->lock);
|
|
|
|
_sc92031_reset(dev);
|
|
mmiowb();
|
|
|
|
spin_unlock_bh(&priv->lock);
|
|
sc92031_enable_interrupts(dev);
|
|
|
|
if (netif_carrier_ok(dev))
|
|
netif_start_queue(dev);
|
|
else
|
|
netif_tx_disable(dev);
|
|
|
|
return 0;
|
|
|
|
out_request_irq:
|
|
pci_free_consistent(pdev, TX_BUF_TOT_LEN, priv->tx_bufs,
|
|
priv->tx_bufs_dma_addr);
|
|
out_alloc_tx_bufs:
|
|
pci_free_consistent(pdev, RX_BUF_LEN, priv->rx_ring,
|
|
priv->rx_ring_dma_addr);
|
|
out_alloc_rx_ring:
|
|
return err;
|
|
}
|
|
|
|
static int sc92031_stop(struct net_device *dev)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
struct pci_dev *pdev = priv->pdev;
|
|
|
|
netif_tx_disable(dev);
|
|
|
|
/* Disable interrupts, stop Tx and Rx. */
|
|
sc92031_disable_interrupts(dev);
|
|
|
|
spin_lock_bh(&priv->lock);
|
|
|
|
_sc92031_disable_tx_rx(dev);
|
|
_sc92031_tx_clear(dev);
|
|
mmiowb();
|
|
|
|
spin_unlock_bh(&priv->lock);
|
|
|
|
free_irq(pdev->irq, dev);
|
|
pci_free_consistent(pdev, TX_BUF_TOT_LEN, priv->tx_bufs,
|
|
priv->tx_bufs_dma_addr);
|
|
pci_free_consistent(pdev, RX_BUF_LEN, priv->rx_ring,
|
|
priv->rx_ring_dma_addr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sc92031_set_multicast_list(struct net_device *dev)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
|
|
spin_lock_bh(&priv->lock);
|
|
|
|
_sc92031_set_mar(dev);
|
|
_sc92031_set_rx_config(dev);
|
|
mmiowb();
|
|
|
|
spin_unlock_bh(&priv->lock);
|
|
}
|
|
|
|
static void sc92031_tx_timeout(struct net_device *dev)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
|
|
/* Disable interrupts by clearing the interrupt mask.*/
|
|
sc92031_disable_interrupts(dev);
|
|
|
|
spin_lock(&priv->lock);
|
|
|
|
priv->tx_timeouts++;
|
|
|
|
_sc92031_reset(dev);
|
|
mmiowb();
|
|
|
|
spin_unlock(&priv->lock);
|
|
|
|
/* enable interrupts */
|
|
sc92031_enable_interrupts(dev);
|
|
|
|
if (netif_carrier_ok(dev))
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
static void sc92031_poll_controller(struct net_device *dev)
|
|
{
|
|
disable_irq(dev->irq);
|
|
if (sc92031_interrupt(dev->irq, dev) != IRQ_NONE)
|
|
sc92031_tasklet((unsigned long)dev);
|
|
enable_irq(dev->irq);
|
|
}
|
|
#endif
|
|
|
|
static int sc92031_ethtool_get_settings(struct net_device *dev,
|
|
struct ethtool_cmd *cmd)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
u8 phy_address;
|
|
u32 phy_ctrl;
|
|
u16 output_status;
|
|
|
|
spin_lock_bh(&priv->lock);
|
|
|
|
phy_address = ioread32(port_base + Miicmd1) >> 27;
|
|
phy_ctrl = ioread32(port_base + PhyCtrl);
|
|
|
|
output_status = _sc92031_mii_read(port_base, MII_OutputStatus);
|
|
_sc92031_mii_scan(port_base);
|
|
mmiowb();
|
|
|
|
spin_unlock_bh(&priv->lock);
|
|
|
|
cmd->supported = SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full
|
|
| SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full
|
|
| SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII;
|
|
|
|
cmd->advertising = ADVERTISED_TP | ADVERTISED_MII;
|
|
|
|
if ((phy_ctrl & (PhyCtrlDux | PhyCtrlSpd100 | PhyCtrlSpd10))
|
|
== (PhyCtrlDux | PhyCtrlSpd100 | PhyCtrlSpd10))
|
|
cmd->advertising |= ADVERTISED_Autoneg;
|
|
|
|
if ((phy_ctrl & PhyCtrlSpd10) == PhyCtrlSpd10)
|
|
cmd->advertising |= ADVERTISED_10baseT_Half;
|
|
|
|
if ((phy_ctrl & (PhyCtrlSpd10 | PhyCtrlDux))
|
|
== (PhyCtrlSpd10 | PhyCtrlDux))
|
|
cmd->advertising |= ADVERTISED_10baseT_Full;
|
|
|
|
if ((phy_ctrl & PhyCtrlSpd100) == PhyCtrlSpd100)
|
|
cmd->advertising |= ADVERTISED_100baseT_Half;
|
|
|
|
if ((phy_ctrl & (PhyCtrlSpd100 | PhyCtrlDux))
|
|
== (PhyCtrlSpd100 | PhyCtrlDux))
|
|
cmd->advertising |= ADVERTISED_100baseT_Full;
|
|
|
|
if (phy_ctrl & PhyCtrlAne)
|
|
cmd->advertising |= ADVERTISED_Autoneg;
|
|
|
|
cmd->speed = (output_status & 0x2) ? SPEED_100 : SPEED_10;
|
|
cmd->duplex = (output_status & 0x4) ? DUPLEX_FULL : DUPLEX_HALF;
|
|
cmd->port = PORT_MII;
|
|
cmd->phy_address = phy_address;
|
|
cmd->transceiver = XCVR_INTERNAL;
|
|
cmd->autoneg = (phy_ctrl & PhyCtrlAne) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sc92031_ethtool_set_settings(struct net_device *dev,
|
|
struct ethtool_cmd *cmd)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
u32 phy_ctrl;
|
|
u32 old_phy_ctrl;
|
|
|
|
if (!(cmd->speed == SPEED_10 || cmd->speed == SPEED_100))
|
|
return -EINVAL;
|
|
if (!(cmd->duplex == DUPLEX_HALF || cmd->duplex == DUPLEX_FULL))
|
|
return -EINVAL;
|
|
if (!(cmd->port == PORT_MII))
|
|
return -EINVAL;
|
|
if (!(cmd->phy_address == 0x1f))
|
|
return -EINVAL;
|
|
if (!(cmd->transceiver == XCVR_INTERNAL))
|
|
return -EINVAL;
|
|
if (!(cmd->autoneg == AUTONEG_DISABLE || cmd->autoneg == AUTONEG_ENABLE))
|
|
return -EINVAL;
|
|
|
|
if (cmd->autoneg == AUTONEG_ENABLE) {
|
|
if (!(cmd->advertising & (ADVERTISED_Autoneg
|
|
| ADVERTISED_100baseT_Full
|
|
| ADVERTISED_100baseT_Half
|
|
| ADVERTISED_10baseT_Full
|
|
| ADVERTISED_10baseT_Half)))
|
|
return -EINVAL;
|
|
|
|
phy_ctrl = PhyCtrlAne;
|
|
|
|
// FIXME: I'm not sure what the original code was trying to do
|
|
if (cmd->advertising & ADVERTISED_Autoneg)
|
|
phy_ctrl |= PhyCtrlDux | PhyCtrlSpd100 | PhyCtrlSpd10;
|
|
if (cmd->advertising & ADVERTISED_100baseT_Full)
|
|
phy_ctrl |= PhyCtrlDux | PhyCtrlSpd100;
|
|
if (cmd->advertising & ADVERTISED_100baseT_Half)
|
|
phy_ctrl |= PhyCtrlSpd100;
|
|
if (cmd->advertising & ADVERTISED_10baseT_Full)
|
|
phy_ctrl |= PhyCtrlSpd10 | PhyCtrlDux;
|
|
if (cmd->advertising & ADVERTISED_10baseT_Half)
|
|
phy_ctrl |= PhyCtrlSpd10;
|
|
} else {
|
|
// FIXME: Whole branch guessed
|
|
phy_ctrl = 0;
|
|
|
|
if (cmd->speed == SPEED_10)
|
|
phy_ctrl |= PhyCtrlSpd10;
|
|
else /* cmd->speed == SPEED_100 */
|
|
phy_ctrl |= PhyCtrlSpd100;
|
|
|
|
if (cmd->duplex == DUPLEX_FULL)
|
|
phy_ctrl |= PhyCtrlDux;
|
|
}
|
|
|
|
spin_lock_bh(&priv->lock);
|
|
|
|
old_phy_ctrl = ioread32(port_base + PhyCtrl);
|
|
phy_ctrl |= old_phy_ctrl & ~(PhyCtrlAne | PhyCtrlDux
|
|
| PhyCtrlSpd100 | PhyCtrlSpd10);
|
|
if (phy_ctrl != old_phy_ctrl)
|
|
iowrite32(phy_ctrl, port_base + PhyCtrl);
|
|
|
|
spin_unlock_bh(&priv->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sc92031_ethtool_get_drvinfo(struct net_device *dev,
|
|
struct ethtool_drvinfo *drvinfo)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
struct pci_dev *pdev = priv->pdev;
|
|
|
|
strcpy(drvinfo->driver, SC92031_NAME);
|
|
strcpy(drvinfo->version, SC92031_VERSION);
|
|
strcpy(drvinfo->bus_info, pci_name(pdev));
|
|
}
|
|
|
|
static void sc92031_ethtool_get_wol(struct net_device *dev,
|
|
struct ethtool_wolinfo *wolinfo)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
u32 pm_config;
|
|
|
|
spin_lock_bh(&priv->lock);
|
|
pm_config = ioread32(port_base + PMConfig);
|
|
spin_unlock_bh(&priv->lock);
|
|
|
|
// FIXME: Guessed
|
|
wolinfo->supported = WAKE_PHY | WAKE_MAGIC
|
|
| WAKE_UCAST | WAKE_MCAST | WAKE_BCAST;
|
|
wolinfo->wolopts = 0;
|
|
|
|
if (pm_config & PM_LinkUp)
|
|
wolinfo->wolopts |= WAKE_PHY;
|
|
|
|
if (pm_config & PM_Magic)
|
|
wolinfo->wolopts |= WAKE_MAGIC;
|
|
|
|
if (pm_config & PM_WakeUp)
|
|
// FIXME: Guessed
|
|
wolinfo->wolopts |= WAKE_UCAST | WAKE_MCAST | WAKE_BCAST;
|
|
}
|
|
|
|
static int sc92031_ethtool_set_wol(struct net_device *dev,
|
|
struct ethtool_wolinfo *wolinfo)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
u32 pm_config;
|
|
|
|
spin_lock_bh(&priv->lock);
|
|
|
|
pm_config = ioread32(port_base + PMConfig)
|
|
& ~(PM_LinkUp | PM_Magic | PM_WakeUp);
|
|
|
|
if (wolinfo->wolopts & WAKE_PHY)
|
|
pm_config |= PM_LinkUp;
|
|
|
|
if (wolinfo->wolopts & WAKE_MAGIC)
|
|
pm_config |= PM_Magic;
|
|
|
|
// FIXME: Guessed
|
|
if (wolinfo->wolopts & (WAKE_UCAST | WAKE_MCAST | WAKE_BCAST))
|
|
pm_config |= PM_WakeUp;
|
|
|
|
priv->pm_config = pm_config;
|
|
iowrite32(pm_config, port_base + PMConfig);
|
|
mmiowb();
|
|
|
|
spin_unlock_bh(&priv->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sc92031_ethtool_nway_reset(struct net_device *dev)
|
|
{
|
|
int err = 0;
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem *port_base = priv->port_base;
|
|
u16 bmcr;
|
|
|
|
spin_lock_bh(&priv->lock);
|
|
|
|
bmcr = _sc92031_mii_read(port_base, MII_BMCR);
|
|
if (!(bmcr & BMCR_ANENABLE)) {
|
|
err = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
_sc92031_mii_write(port_base, MII_BMCR, bmcr | BMCR_ANRESTART);
|
|
|
|
out:
|
|
_sc92031_mii_scan(port_base);
|
|
mmiowb();
|
|
|
|
spin_unlock_bh(&priv->lock);
|
|
|
|
return err;
|
|
}
|
|
|
|
static const char sc92031_ethtool_stats_strings[SILAN_STATS_NUM][ETH_GSTRING_LEN] = {
|
|
"tx_timeout",
|
|
"rx_loss",
|
|
};
|
|
|
|
static void sc92031_ethtool_get_strings(struct net_device *dev,
|
|
u32 stringset, u8 *data)
|
|
{
|
|
if (stringset == ETH_SS_STATS)
|
|
memcpy(data, sc92031_ethtool_stats_strings,
|
|
SILAN_STATS_NUM * ETH_GSTRING_LEN);
|
|
}
|
|
|
|
static int sc92031_ethtool_get_sset_count(struct net_device *dev, int sset)
|
|
{
|
|
switch (sset) {
|
|
case ETH_SS_STATS:
|
|
return SILAN_STATS_NUM;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static void sc92031_ethtool_get_ethtool_stats(struct net_device *dev,
|
|
struct ethtool_stats *stats, u64 *data)
|
|
{
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
|
|
spin_lock_bh(&priv->lock);
|
|
data[0] = priv->tx_timeouts;
|
|
data[1] = priv->rx_loss;
|
|
spin_unlock_bh(&priv->lock);
|
|
}
|
|
|
|
static struct ethtool_ops sc92031_ethtool_ops = {
|
|
.get_settings = sc92031_ethtool_get_settings,
|
|
.set_settings = sc92031_ethtool_set_settings,
|
|
.get_drvinfo = sc92031_ethtool_get_drvinfo,
|
|
.get_wol = sc92031_ethtool_get_wol,
|
|
.set_wol = sc92031_ethtool_set_wol,
|
|
.nway_reset = sc92031_ethtool_nway_reset,
|
|
.get_link = ethtool_op_get_link,
|
|
.get_strings = sc92031_ethtool_get_strings,
|
|
.get_sset_count = sc92031_ethtool_get_sset_count,
|
|
.get_ethtool_stats = sc92031_ethtool_get_ethtool_stats,
|
|
};
|
|
|
|
static int __devinit sc92031_probe(struct pci_dev *pdev,
|
|
const struct pci_device_id *id)
|
|
{
|
|
int err;
|
|
void __iomem* port_base;
|
|
struct net_device *dev;
|
|
struct sc92031_priv *priv;
|
|
u32 mac0, mac1;
|
|
|
|
err = pci_enable_device(pdev);
|
|
if (unlikely(err < 0))
|
|
goto out_enable_device;
|
|
|
|
pci_set_master(pdev);
|
|
|
|
err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
|
|
if (unlikely(err < 0))
|
|
goto out_set_dma_mask;
|
|
|
|
err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
|
|
if (unlikely(err < 0))
|
|
goto out_set_dma_mask;
|
|
|
|
err = pci_request_regions(pdev, SC92031_NAME);
|
|
if (unlikely(err < 0))
|
|
goto out_request_regions;
|
|
|
|
port_base = pci_iomap(pdev, SC92031_USE_BAR, 0);
|
|
if (unlikely(!port_base)) {
|
|
err = -EIO;
|
|
goto out_iomap;
|
|
}
|
|
|
|
dev = alloc_etherdev(sizeof(struct sc92031_priv));
|
|
if (unlikely(!dev)) {
|
|
err = -ENOMEM;
|
|
goto out_alloc_etherdev;
|
|
}
|
|
|
|
pci_set_drvdata(pdev, dev);
|
|
|
|
#if SC92031_USE_BAR == 0
|
|
dev->mem_start = pci_resource_start(pdev, SC92031_USE_BAR);
|
|
dev->mem_end = pci_resource_end(pdev, SC92031_USE_BAR);
|
|
#elif SC92031_USE_BAR == 1
|
|
dev->base_addr = pci_resource_start(pdev, SC92031_USE_BAR);
|
|
#endif
|
|
dev->irq = pdev->irq;
|
|
|
|
/* faked with skb_copy_and_csum_dev */
|
|
dev->features = NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA;
|
|
|
|
dev->get_stats = sc92031_get_stats;
|
|
dev->ethtool_ops = &sc92031_ethtool_ops;
|
|
dev->hard_start_xmit = sc92031_start_xmit;
|
|
dev->watchdog_timeo = TX_TIMEOUT;
|
|
dev->open = sc92031_open;
|
|
dev->stop = sc92031_stop;
|
|
dev->set_multicast_list = sc92031_set_multicast_list;
|
|
dev->tx_timeout = sc92031_tx_timeout;
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
dev->poll_controller = sc92031_poll_controller;
|
|
#endif
|
|
|
|
priv = netdev_priv(dev);
|
|
spin_lock_init(&priv->lock);
|
|
priv->port_base = port_base;
|
|
priv->pdev = pdev;
|
|
tasklet_init(&priv->tasklet, sc92031_tasklet, (unsigned long)dev);
|
|
/* Fudge tasklet count so the call to sc92031_enable_interrupts at
|
|
* sc92031_open will work correctly */
|
|
tasklet_disable_nosync(&priv->tasklet);
|
|
|
|
/* PCI PM Wakeup */
|
|
iowrite32((~PM_LongWF & ~PM_LWPTN) | PM_Enable, port_base + PMConfig);
|
|
|
|
mac0 = ioread32(port_base + MAC0);
|
|
mac1 = ioread32(port_base + MAC0 + 4);
|
|
dev->dev_addr[0] = dev->perm_addr[0] = mac0 >> 24;
|
|
dev->dev_addr[1] = dev->perm_addr[1] = mac0 >> 16;
|
|
dev->dev_addr[2] = dev->perm_addr[2] = mac0 >> 8;
|
|
dev->dev_addr[3] = dev->perm_addr[3] = mac0;
|
|
dev->dev_addr[4] = dev->perm_addr[4] = mac1 >> 8;
|
|
dev->dev_addr[5] = dev->perm_addr[5] = mac1;
|
|
|
|
err = register_netdev(dev);
|
|
if (err < 0)
|
|
goto out_register_netdev;
|
|
|
|
return 0;
|
|
|
|
out_register_netdev:
|
|
free_netdev(dev);
|
|
out_alloc_etherdev:
|
|
pci_iounmap(pdev, port_base);
|
|
out_iomap:
|
|
pci_release_regions(pdev);
|
|
out_request_regions:
|
|
out_set_dma_mask:
|
|
pci_disable_device(pdev);
|
|
out_enable_device:
|
|
return err;
|
|
}
|
|
|
|
static void __devexit sc92031_remove(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
void __iomem* port_base = priv->port_base;
|
|
|
|
unregister_netdev(dev);
|
|
free_netdev(dev);
|
|
pci_iounmap(pdev, port_base);
|
|
pci_release_regions(pdev);
|
|
pci_disable_device(pdev);
|
|
}
|
|
|
|
static int sc92031_suspend(struct pci_dev *pdev, pm_message_t state)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
|
|
pci_save_state(pdev);
|
|
|
|
if (!netif_running(dev))
|
|
goto out;
|
|
|
|
netif_device_detach(dev);
|
|
|
|
/* Disable interrupts, stop Tx and Rx. */
|
|
sc92031_disable_interrupts(dev);
|
|
|
|
spin_lock_bh(&priv->lock);
|
|
|
|
_sc92031_disable_tx_rx(dev);
|
|
_sc92031_tx_clear(dev);
|
|
mmiowb();
|
|
|
|
spin_unlock_bh(&priv->lock);
|
|
|
|
out:
|
|
pci_set_power_state(pdev, pci_choose_state(pdev, state));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sc92031_resume(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
struct sc92031_priv *priv = netdev_priv(dev);
|
|
|
|
pci_restore_state(pdev);
|
|
pci_set_power_state(pdev, PCI_D0);
|
|
|
|
if (!netif_running(dev))
|
|
goto out;
|
|
|
|
/* Interrupts already disabled by sc92031_suspend */
|
|
spin_lock_bh(&priv->lock);
|
|
|
|
_sc92031_reset(dev);
|
|
mmiowb();
|
|
|
|
spin_unlock_bh(&priv->lock);
|
|
sc92031_enable_interrupts(dev);
|
|
|
|
netif_device_attach(dev);
|
|
|
|
if (netif_carrier_ok(dev))
|
|
netif_wake_queue(dev);
|
|
else
|
|
netif_tx_disable(dev);
|
|
|
|
out:
|
|
return 0;
|
|
}
|
|
|
|
static struct pci_device_id sc92031_pci_device_id_table[] __devinitdata = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_SILAN, PCI_DEVICE_ID_SILAN_SC92031) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_SILAN, PCI_DEVICE_ID_SILAN_8139D) },
|
|
{ 0, }
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, sc92031_pci_device_id_table);
|
|
|
|
static struct pci_driver sc92031_pci_driver = {
|
|
.name = SC92031_NAME,
|
|
.id_table = sc92031_pci_device_id_table,
|
|
.probe = sc92031_probe,
|
|
.remove = __devexit_p(sc92031_remove),
|
|
.suspend = sc92031_suspend,
|
|
.resume = sc92031_resume,
|
|
};
|
|
|
|
static int __init sc92031_init(void)
|
|
{
|
|
printk(KERN_INFO SC92031_DESCRIPTION " " SC92031_VERSION "\n");
|
|
return pci_register_driver(&sc92031_pci_driver);
|
|
}
|
|
|
|
static void __exit sc92031_exit(void)
|
|
{
|
|
pci_unregister_driver(&sc92031_pci_driver);
|
|
}
|
|
|
|
module_init(sc92031_init);
|
|
module_exit(sc92031_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Cesar Eduardo Barros <cesarb@cesarb.net>");
|
|
MODULE_DESCRIPTION(SC92031_DESCRIPTION);
|
|
MODULE_VERSION(SC92031_VERSION);
|