mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-27 03:47:43 +00:00
0d95b75e2d
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
390 lines
10 KiB
C
390 lines
10 KiB
C
/*
|
|
* Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/types.h>
|
|
#include <linux/init.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mfd/mc13783.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/usb/otg.h>
|
|
#include <linux/usb/ulpi.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/time.h>
|
|
#include <asm/memory.h>
|
|
#include <asm/mach/map.h>
|
|
#include <mach/common.h>
|
|
#include <mach/iomux-mx3.h>
|
|
#include <mach/3ds_debugboard.h>
|
|
#include <mach/ulpi.h>
|
|
|
|
#include "devices-imx31.h"
|
|
#include "devices.h"
|
|
|
|
/* CPLD IRQ line for external uart, external ethernet etc */
|
|
#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
|
|
|
|
/*
|
|
* This file contains the board-specific initialization routines.
|
|
*/
|
|
|
|
static int mx31_3ds_pins[] = {
|
|
/* UART1 */
|
|
MX31_PIN_CTS1__CTS1,
|
|
MX31_PIN_RTS1__RTS1,
|
|
MX31_PIN_TXD1__TXD1,
|
|
MX31_PIN_RXD1__RXD1,
|
|
IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
|
|
/* SPI 1 */
|
|
MX31_PIN_CSPI2_SCLK__SCLK,
|
|
MX31_PIN_CSPI2_MOSI__MOSI,
|
|
MX31_PIN_CSPI2_MISO__MISO,
|
|
MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
|
|
MX31_PIN_CSPI2_SS0__SS0,
|
|
MX31_PIN_CSPI2_SS2__SS2, /*CS for MC13783 */
|
|
/* MC13783 IRQ */
|
|
IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO),
|
|
/* USB OTG reset */
|
|
IOMUX_MODE(MX31_PIN_USB_PWR, IOMUX_CONFIG_GPIO),
|
|
/* USB OTG */
|
|
MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
|
|
MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
|
|
MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
|
|
MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
|
|
MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
|
|
MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
|
|
MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
|
|
MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
|
|
MX31_PIN_USBOTG_CLK__USBOTG_CLK,
|
|
MX31_PIN_USBOTG_DIR__USBOTG_DIR,
|
|
MX31_PIN_USBOTG_NXT__USBOTG_NXT,
|
|
MX31_PIN_USBOTG_STP__USBOTG_STP,
|
|
/*Keyboard*/
|
|
MX31_PIN_KEY_ROW0_KEY_ROW0,
|
|
MX31_PIN_KEY_ROW1_KEY_ROW1,
|
|
MX31_PIN_KEY_ROW2_KEY_ROW2,
|
|
MX31_PIN_KEY_COL0_KEY_COL0,
|
|
MX31_PIN_KEY_COL1_KEY_COL1,
|
|
MX31_PIN_KEY_COL2_KEY_COL2,
|
|
MX31_PIN_KEY_COL3_KEY_COL3,
|
|
/* USB Host 2 */
|
|
IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
|
|
IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
|
|
IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
|
|
IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
|
|
IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
|
|
IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
|
|
IOMUX_MODE(MX31_PIN_PC_VS2, IOMUX_CONFIG_ALT1),
|
|
IOMUX_MODE(MX31_PIN_PC_BVD1, IOMUX_CONFIG_ALT1),
|
|
IOMUX_MODE(MX31_PIN_PC_BVD2, IOMUX_CONFIG_ALT1),
|
|
IOMUX_MODE(MX31_PIN_PC_RST, IOMUX_CONFIG_ALT1),
|
|
IOMUX_MODE(MX31_PIN_IOIS16, IOMUX_CONFIG_ALT1),
|
|
IOMUX_MODE(MX31_PIN_PC_RW_B, IOMUX_CONFIG_ALT1),
|
|
/* USB Host2 reset */
|
|
IOMUX_MODE(MX31_PIN_USB_BYP, IOMUX_CONFIG_GPIO),
|
|
};
|
|
|
|
/*
|
|
* Matrix keyboard
|
|
*/
|
|
|
|
static const uint32_t mx31_3ds_keymap[] = {
|
|
KEY(0, 0, KEY_UP),
|
|
KEY(0, 1, KEY_DOWN),
|
|
KEY(1, 0, KEY_RIGHT),
|
|
KEY(1, 1, KEY_LEFT),
|
|
KEY(1, 2, KEY_ENTER),
|
|
KEY(2, 0, KEY_F6),
|
|
KEY(2, 1, KEY_F8),
|
|
KEY(2, 2, KEY_F9),
|
|
KEY(2, 3, KEY_F10),
|
|
};
|
|
|
|
static const struct matrix_keymap_data mx31_3ds_keymap_data __initconst = {
|
|
.keymap = mx31_3ds_keymap,
|
|
.keymap_size = ARRAY_SIZE(mx31_3ds_keymap),
|
|
};
|
|
|
|
/* Regulators */
|
|
static struct regulator_init_data pwgtx_init = {
|
|
.constraints = {
|
|
.boot_on = 1,
|
|
.always_on = 1,
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data gpo_init = {
|
|
.constraints = {
|
|
.boot_on = 1,
|
|
.always_on = 1,
|
|
}
|
|
};
|
|
|
|
static struct mc13783_regulator_init_data mx31_3ds_regulators[] = {
|
|
{
|
|
.id = MC13783_REGU_PWGT1SPI, /* Power Gate for ARM core. */
|
|
.init_data = &pwgtx_init,
|
|
}, {
|
|
.id = MC13783_REGU_PWGT2SPI, /* Power Gate for L2 Cache. */
|
|
.init_data = &pwgtx_init,
|
|
}, {
|
|
|
|
.id = MC13783_REGU_GPO1, /* Turn on 1.8V */
|
|
.init_data = &gpo_init,
|
|
}, {
|
|
.id = MC13783_REGU_GPO3, /* Turn on 3.3V */
|
|
.init_data = &gpo_init,
|
|
},
|
|
};
|
|
|
|
/* MC13783 */
|
|
static struct mc13783_platform_data mc13783_pdata __initdata = {
|
|
.regulators = mx31_3ds_regulators,
|
|
.num_regulators = ARRAY_SIZE(mx31_3ds_regulators),
|
|
.flags = MC13783_USE_REGULATOR | MC13783_USE_TOUCHSCREEN,
|
|
};
|
|
|
|
/* SPI */
|
|
static int spi1_internal_chipselect[] = {
|
|
MXC_SPI_CS(0),
|
|
MXC_SPI_CS(2),
|
|
};
|
|
|
|
static const struct spi_imx_master spi1_pdata __initconst = {
|
|
.chipselect = spi1_internal_chipselect,
|
|
.num_chipselect = ARRAY_SIZE(spi1_internal_chipselect),
|
|
};
|
|
|
|
static struct spi_board_info mx31_3ds_spi_devs[] __initdata = {
|
|
{
|
|
.modalias = "mc13783",
|
|
.max_speed_hz = 1000000,
|
|
.bus_num = 1,
|
|
.chip_select = 1, /* SS2 */
|
|
.platform_data = &mc13783_pdata,
|
|
.irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
|
|
.mode = SPI_CS_HIGH,
|
|
},
|
|
};
|
|
|
|
/*
|
|
* NAND Flash
|
|
*/
|
|
static const struct mxc_nand_platform_data
|
|
mx31_3ds_nand_board_info __initconst = {
|
|
.width = 1,
|
|
.hw_ecc = 1,
|
|
#ifdef MACH_MX31_3DS_MXC_NAND_USE_BBT
|
|
.flash_bbt = 1,
|
|
#endif
|
|
};
|
|
|
|
/*
|
|
* USB OTG
|
|
*/
|
|
|
|
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
|
|
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
|
|
|
|
#define USBOTG_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_PWR)
|
|
#define USBH2_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_BYP)
|
|
|
|
static int mx31_3ds_usbotg_init(void)
|
|
{
|
|
int err;
|
|
|
|
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
|
|
|
|
err = gpio_request(USBOTG_RST_B, "otgusb-reset");
|
|
if (err) {
|
|
pr_err("Failed to request the USB OTG reset gpio\n");
|
|
return err;
|
|
}
|
|
|
|
err = gpio_direction_output(USBOTG_RST_B, 0);
|
|
if (err) {
|
|
pr_err("Failed to drive the USB OTG reset gpio\n");
|
|
goto usbotg_free_reset;
|
|
}
|
|
|
|
mdelay(1);
|
|
gpio_set_value(USBOTG_RST_B, 1);
|
|
return 0;
|
|
|
|
usbotg_free_reset:
|
|
gpio_free(USBOTG_RST_B);
|
|
return err;
|
|
}
|
|
|
|
static int mx31_3ds_host2_init(struct platform_device *pdev)
|
|
{
|
|
int err;
|
|
|
|
mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_PC_VS2, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_PC_BVD1, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_PC_BVD2, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_PC_RST, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_IOIS16, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_PC_RW_B, USB_PAD_CFG);
|
|
|
|
err = gpio_request(USBH2_RST_B, "usbh2-reset");
|
|
if (err) {
|
|
pr_err("Failed to request the USB Host 2 reset gpio\n");
|
|
return err;
|
|
}
|
|
|
|
err = gpio_direction_output(USBH2_RST_B, 0);
|
|
if (err) {
|
|
pr_err("Failed to drive the USB Host 2 reset gpio\n");
|
|
goto usbotg_free_reset;
|
|
}
|
|
|
|
mdelay(1);
|
|
gpio_set_value(USBH2_RST_B, 1);
|
|
return 0;
|
|
|
|
usbotg_free_reset:
|
|
gpio_free(USBH2_RST_B);
|
|
return err;
|
|
}
|
|
|
|
#if defined(CONFIG_USB_ULPI)
|
|
static struct mxc_usbh_platform_data otg_pdata __initdata = {
|
|
.portsc = MXC_EHCI_MODE_ULPI,
|
|
.flags = MXC_EHCI_POWER_PINS_ENABLED,
|
|
};
|
|
|
|
static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
|
|
.init = mx31_3ds_host2_init,
|
|
.portsc = MXC_EHCI_MODE_ULPI,
|
|
.flags = MXC_EHCI_POWER_PINS_ENABLED,
|
|
};
|
|
#endif
|
|
|
|
static const struct fsl_usb2_platform_data usbotg_pdata __initconst = {
|
|
.operating_mode = FSL_USB2_DR_DEVICE,
|
|
.phy_mode = FSL_USB2_PHY_ULPI,
|
|
};
|
|
|
|
static int otg_mode_host;
|
|
|
|
static int __init mx31_3ds_otg_mode(char *options)
|
|
{
|
|
if (!strcmp(options, "host"))
|
|
otg_mode_host = 1;
|
|
else if (!strcmp(options, "device"))
|
|
otg_mode_host = 0;
|
|
else
|
|
pr_info("otg_mode neither \"host\" nor \"device\". "
|
|
"Defaulting to device\n");
|
|
return 0;
|
|
}
|
|
__setup("otg_mode=", mx31_3ds_otg_mode);
|
|
|
|
static const struct imxuart_platform_data uart_pdata __initconst = {
|
|
.flags = IMXUART_HAVE_RTSCTS,
|
|
};
|
|
|
|
/*
|
|
* Set up static virtual mappings.
|
|
*/
|
|
static void __init mx31_3ds_map_io(void)
|
|
{
|
|
mx31_map_io();
|
|
}
|
|
|
|
/*!
|
|
* Board specific initialization.
|
|
*/
|
|
static void __init mxc_board_init(void)
|
|
{
|
|
mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
|
|
"mx31_3ds");
|
|
|
|
imx31_add_imx_uart0(&uart_pdata);
|
|
imx31_add_mxc_nand(&mx31_3ds_nand_board_info);
|
|
|
|
imx31_add_spi_imx1(&spi1_pdata);
|
|
spi_register_board_info(mx31_3ds_spi_devs,
|
|
ARRAY_SIZE(mx31_3ds_spi_devs));
|
|
|
|
imx31_add_imx_keypad(&mx31_3ds_keymap_data);
|
|
|
|
mx31_3ds_usbotg_init();
|
|
#if defined(CONFIG_USB_ULPI)
|
|
if (otg_mode_host) {
|
|
otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
|
|
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
|
|
|
|
imx31_add_mxc_ehci_otg(&otg_pdata);
|
|
}
|
|
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
|
|
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
|
|
imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
|
|
#endif
|
|
if (!otg_mode_host)
|
|
imx31_add_fsl_usb2_udc(&usbotg_pdata);
|
|
|
|
if (mxc_expio_init(MX31_CS5_BASE_ADDR, EXPIO_PARENT_INT))
|
|
printk(KERN_WARNING "Init of the debug board failed, all "
|
|
"devices on the debug board are unusable.\n");
|
|
imx31_add_imx2_wdt(NULL);
|
|
}
|
|
|
|
static void __init mx31_3ds_timer_init(void)
|
|
{
|
|
mx31_clocks_init(26000000);
|
|
}
|
|
|
|
static struct sys_timer mx31_3ds_timer = {
|
|
.init = mx31_3ds_timer_init,
|
|
};
|
|
|
|
/*
|
|
* The following uses standard kernel macros defined in arch.h in order to
|
|
* initialize __mach_desc_MX31_3DS data structure.
|
|
*/
|
|
MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
|
|
/* Maintainer: Freescale Semiconductor, Inc. */
|
|
.boot_params = MX3x_PHYS_OFFSET + 0x100,
|
|
.map_io = mx31_3ds_map_io,
|
|
.init_irq = mx31_init_irq,
|
|
.init_machine = mxc_board_init,
|
|
.timer = &mx31_3ds_timer,
|
|
MACHINE_END
|