linux/arch/powerpc/boot
Linus Torvalds 173192958d MMC highlights for 3.10:
Core:
  - Introduce MMC_CAP2_NO_PRESCAN_POWERUP to allow skipping mmc_power_up()
    at boot/initialization time if it's already happened, for performance
    (faster boot time) reasons.
  - Fix a bit width test failure that resulted in old eMMC cards being put
    into 1-bit mode when 4-bit mode was available.
  - Expose fwrev/hwrev for MMCv4 parts.
  - Improve card removal logic in the case where the card's removed slowly;
    we were missing card removal events if the card retained contact with
    the slot pads for long enough to reply to a CMD13 while being removed.
 
 Drivers:
  - davinci_mmc: Support using PIO instead of DMA.
  - dw_mmc: Add support for Exynos4412.
  - mxcmmc: DT support, use slot-gpio API.
  - mxs-mmc: Add broken-cd/cd-inverted/non-removable DT property support.
  - sdhci-sirf: New sdhci-pltfm driver for CSR SiRF SoCs:
     SiRFprimaII: unicore ARM Cortex-A9
     SiRFatlas6: unicore ARM Cortex-A9
     SiRFmarco: dual core ARM Cortex-A9 SMP
  - sdhci-tegra: Add support for Tegra114 platforms, use mmc_of_parse().
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQIcBAABAgAGBQJRfr+qAAoJEHNBYZ7TNxYMG90QALW6ArdTxkfNKNybCx/s3ttm
 hyP2BB9eXF/FbZ9bGHGuv9NXV/4YZ4yr4c3yV4paOMW3s0z/+IhqajLfCgPFPCGK
 MOk5GAStN/+znBjLy+5V/17EJuVpE+WVwUqDg3RafB8NGQtaClymwPg6R+SMWwL9
 uiRcCVgmgzlk9l+4Z1p9wHUeQlhZQ/Okzj4CjkOpWfgsUpo0PcWQRosd+CHHirWz
 iWnhFBM1cP4Nj59ashYSedu797s29pKGd31JcuWWQE228iykGfcCJWzMr9YMiU6x
 LwESeuTST8b9HblI7WYnFvpVvD9qTuBkkKMIKMNb4E34xBf8+H2zUh1hK7iEnDXt
 W0F1xy3WsxpJ1yF0BY9SqqnNeLpJBOenHlTZfGlf5r+kHWYUUQvvqw/ZdmWStRgv
 mSoqXSmz/oM3rn1KjMritJ9oyr0EH8kHDMAsoiCF0EuGipmenFTdJJiwbh0JZJxK
 bjqPUROtSK8TdPvTw1BPRX5YtJLzsG4HdsI3C8W05BTbCL9iIE1NaWP27nikPVfq
 glt9EilzgR252Wc649OrB7JAHBZjlVFIndNzjziGdxNzH6m1AK05qxTL5hBvba99
 plccrsVMDGWLSmsGVwz7Eo+TLflRCdtrE+7O4NrlydZzp2t24HZrMc9rN8GDWQQE
 dP91YUdpDYrTsUBKiKGQ
 =Pr7P
 -----END PGP SIGNATURE-----

Merge tag 'mmc-updates-for-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

Pull MMC update from Chris Ball:
 "MMC highlights for 3.10:

  Core:
   - Introduce MMC_CAP2_NO_PRESCAN_POWERUP to allow skipping
     mmc_power_up() at boot/initialization time if it's already
     happened, for performance (faster boot time) reasons.
   - Fix a bit width test failure that resulted in old eMMC cards being
     put into 1-bit mode when 4-bit mode was available.
   - Expose fwrev/hwrev for MMCv4 parts.
   - Improve card removal logic in the case where the card's removed
     slowly; we were missing card removal events if the card retained
     contact with the slot pads for long enough to reply to a CMD13
     while being removed.

  Drivers:
   - davinci_mmc: Support using PIO instead of DMA.
   - dw_mmc: Add support for Exynos4412.
   - mxcmmc: DT support, use slot-gpio API.
   - mxs-mmc: Add broken-cd/cd-inverted/non-removable DT property
     support.
   - sdhci-sirf: New sdhci-pltfm driver for CSR SiRF SoCs:
       SiRFprimaII: unicore ARM Cortex-A9
       SiRFatlas6: unicore ARM Cortex-A9
       SiRFmarco: dual core ARM Cortex-A9 SMP
   - sdhci-tegra: Add support for Tegra114 platforms, use
     mmc_of_parse()"

* tag 'mmc-updates-for-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (66 commits)
  mmc: sdhci-tegra: fix MODULE_DEVICE_TABLE
  mmc: core: fix init controller performance regression, updated patch
  mmc: mxcmmc: enable DMA support on mpc512x
  mmc: mxcmmc: constify mxcmci_devtype
  mmc: mxcmmc: use slot-gpio API for write-protect detection
  mmc: mxcmmc: add mpc512x SDHC support
  mmc: mxcmmc: fix race conditions for host->req and host->data access
  mmc: mxcmmc: DT support
  mmc: dw_mmc: let device core setup the default pin configuration
  mmc: mxs-mmc: add broken-cd property
  mmc: mxs-mmc: add non-removable property
  mmc: mxs-mmc: add cd-inverted property
  mmc: core: call pm_runtime_put_noidle in pm_runtime_get_sync failed case
  mmc: mxcmmc: Fix bug when card is present during boot
  mmc: core: fix performance regression initializing MMC host controllers
  Revert "mmc: core: wait while adding MMC host to ensure root mounts successfully"
  mmc: atmel-mci: pio hang on block errors
  mmc: core: Fix bit width test failing on old eMMC cards
  mmc: dw_mmc: Use pr_info instead of printk
  mmc: dw_mmc: Check return value of regulator_enable
  ...
2013-05-04 13:45:17 -07:00
..
dts MMC highlights for 3.10: 2013-05-04 13:45:17 -07:00
.gitignore powerpc: remove four unused files from .gitignore 2012-09-01 08:31:56 -07:00
4xx.c powerpc/44x: Fix UART clocks on 440SPe 2010-05-12 07:48:49 -04:00
4xx.h powerpc/405ex: provide necessary fixup function to support cuImage 2009-08-31 09:20:55 -04:00
44x.h
addnote.c powerpc: Use static const char arrays 2010-10-13 16:19:03 +11:00
bamboo.c [POWERPC] Start removing linux,network-index in favour of aliases 2008-03-26 07:19:16 -05:00
cpm-serial.c [POWERPC] cpm-serial: Relocate CPM buffer descriptors and SMC parameter ram. 2008-04-17 01:01:37 -05:00
crt0.S powerpc/boot: Allow building the zImage wrapper as a relocatable ET_DYN 2011-04-20 16:59:20 +10:00
crtsavres.S [POWERPC] Fix bootwrapper builds with newer gcc versions 2008-06-16 15:00:52 +10:00
cuboot-8xx.c
cuboot-52xx.c powerpc/52xx: Make cuImage more robust in locating immr node. 2008-10-15 11:09:59 -06:00
cuboot-83xx.c
cuboot-85xx-cpm2.c
cuboot-85xx.c powerpc/85xx: cuboot - Fix up ethernet3 MAC address on MPC85xx 2009-06-15 21:45:32 -05:00
cuboot-824x.c
cuboot-acadia.c powerpc/40x: Add cuboot wrapper for Acadia board 2008-10-17 10:31:19 -04:00
cuboot-amigaone.c powerpc/amigaone: Bootwrapper and serial console support for AmigaOne 2009-02-11 16:00:09 +11:00
cuboot-bamboo.c [POWERPC] 4xx: Use correct board info structure in cuboot wrappers 2008-02-28 08:16:27 -06:00
cuboot-c2k.c powerpc: Boot code for the C2K 2008-06-09 13:42:25 +10:00
cuboot-ebony.c [POWERPC] 4xx: Use correct board info structure in cuboot wrappers 2008-02-28 08:16:27 -06:00
cuboot-hotfoot.c powerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBC 2009-08-31 09:15:51 -04:00
cuboot-katmai.c [POWERPC] 4xx: Use correct board info structure in cuboot wrappers 2008-02-28 08:16:27 -06:00
cuboot-kilauea.c powerpc/405ex: support cuImage via included dtb 2009-08-31 09:23:22 -04:00
cuboot-mpc7448hpc2.c
cuboot-pq2.c [POWERPC] cuboot-pq2: PCI fixes 2008-04-17 01:01:40 -05:00
cuboot-rainier.c [POWERPC] Start removing linux,network-index in favour of aliases 2008-03-26 07:19:16 -05:00
cuboot-sam440ep.c powerpc/4xx: Sam440ep support 2008-06-11 08:32:49 -04:00
cuboot-sequoia.c [POWERPC] Start removing linux,network-index in favour of aliases 2008-03-26 07:19:16 -05:00
cuboot-taishan.c [POWERPC] Start removing linux,network-index in favour of aliases 2008-03-26 07:19:16 -05:00
cuboot-warp.c powerpc/44x: Warp patches for the new NDFC driver 2009-01-20 08:17:21 -05:00
cuboot-yosemite.c [POWERPC] 4xx: Add bootwrapper for AMCC Yosemite board 2008-03-26 07:19:17 -05:00
cuboot.c
cuboot.h
dcr.h powerpc/boot: Add mfdcrx 2011-12-09 07:49:50 -05:00
devtree.c powerpc/bootwrapper: Use the child-bus #address-cells to decide which range entry to use 2008-12-21 14:21:17 +11:00
div64.S powerpc/boot: Add extended precision shifts to the boot wrapper. 2011-12-09 07:49:27 -05:00
dummy.c
ebony.c [POWERPC] Start removing linux,network-index in favour of aliases 2008-03-26 07:19:16 -05:00
elf_util.c powerpc: Make the 64-bit kernel as a position-independent executable 2008-09-15 11:08:38 -07:00
elf.h
ep88xc.c
ep405.c
ep8248e.c
epapr.c powerpc/boot: Add an ePAPR compliant boot wrapper 2011-04-20 16:59:21 +10:00
fixed-head.S
fsl-soc.c
fsl-soc.h
gamecube-head.S powerpc: gamecube: bootwrapper bits 2009-12-12 22:24:26 -07:00
gamecube.c powerpc: gamecube: bootwrapper bits 2009-12-12 22:24:26 -07:00
gunzip_util.c
gunzip_util.h
hack-coff.c
holly.c
install.sh kbuild: use INSTALLKERNEL to select customized installkernel script 2009-09-20 12:18:14 +02:00
io.h powerpc: Move include files to arch/powerpc/include/asm 2008-08-04 12:02:00 +10:00
libfdt_env.h powerpc: Update in-kernel dtc and libfdt to version 1.2.0 2008-08-20 16:34:58 +10:00
libfdt-wrapper.c powerpc/boot: Allocate more memory for dtb 2008-11-06 09:49:43 +11:00
main.c powerpc: Fix format string warning in arch/powerpc/boot/main.c 2008-10-31 20:14:19 +11:00
Makefile powerpc: Fix build dependencies for c files requiring libfdt.h 2012-09-07 11:44:27 +10:00
mktree.c powerpc: use consistent types in mktree 2009-08-20 10:29:30 +10:00
mpc8xx.c
mpc8xx.h
mpc52xx-psc.c [POWERPC] Add bootwrapper function to get virtual reg from the device tree. 2008-04-17 01:01:37 -05:00
mpsc.c [POWERPC] prpmc2800: Clean up dts properties 2008-04-15 21:21:24 +10:00
mv64x60_i2c.c [POWERPC] mv64x60: Remove device tree absolute path references 2008-04-15 21:21:24 +10:00
mv64x60.c [POWERPC] mv64x60: Remove device tree absolute path references 2008-04-15 21:21:24 +10:00
mv64x60.h
ns16550.c [POWERPC] Xilinx: boot support for Xilinx uart 16550. 2008-04-24 13:32:46 -05:00
of.c
of.h
ofconsole.c
oflib.c powerpc: Change the default link address for pSeries zImage kernels 2008-07-01 11:28:32 +10:00
ops.h powerpc: Add del_node() for early boot code to prune inapplicable devices. 2008-10-22 15:01:21 +11:00
page.h
planetcore.c
planetcore.h
ppc_asm.h
ppcboot-hotfoot.h powerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBC 2009-08-31 09:15:51 -04:00
ppcboot.h
pq2.c
pq2.h
prpmc2800.c [POWERPC] mv64x60: Remove device tree absolute path references 2008-04-15 21:21:24 +10:00
ps3-head.S [POWERPC] PS3: Bootwrapper improvements 2008-04-01 20:43:07 +11:00
ps3-hvcall.S
ps3.c [POWERPC] PS3: Bootwrapper improvements 2008-04-01 20:43:07 +11:00
README
redboot-8xx.c
redboot-83xx.c [POWERPC] 83xx: Add support for Analogue & Micro ASP837E board 2008-06-02 14:44:25 -05:00
redboot.h
reg.h
rs6000.h
serial.c powerpc/amigaone: Bootwrapper and serial console support for AmigaOne 2009-02-11 16:00:09 +11:00
simple_alloc.c
simpleboot.c Move dtc and libfdt sources from arch/powerpc/boot to scripts/dtc 2009-05-02 16:52:26 -07:00
stdio.c
stdio.h
stdlib.c
stdlib.h
string.h
string.S powerpc: Fix boot wrapper memcmp() called with zero length argument 2008-10-21 15:17:48 +11:00
treeboot-bamboo.c
treeboot-currituck.c powerpc/47x: Add support for the new IBM currituck platform 2011-12-09 07:51:40 -05:00
treeboot-ebony.c
treeboot-iss4xx.c powerpc/44x: boot wrapper: allow kernel to load into non-zero address 2011-07-12 09:34:41 -04:00
treeboot-walnut.c [POWERPC] Start removing linux,network-index in favour of aliases 2008-03-26 07:19:16 -05:00
types.h
uartlite.c
ugecon.c powerpc/gamecube/wii: Fix off-by-one error in ugecon/usbgecko_udbg 2009-12-18 15:13:57 +11:00
ugecon.h powerpc: gamecube/wii: usbgecko bootwrapper console support 2009-12-12 22:24:26 -07:00
util.S
virtex405-head.S [POWERPC] bootwrapper: Add a firmware-independent simpleboot target. 2008-04-02 20:36:11 -05:00
virtex.c powerpc/virtex: Fix booting of Xilinx FPGAs with 16550 for 405 and 440 2008-07-04 00:58:59 -06:00
wii-head.S powerpc: wii: bootwrapper bits 2009-12-12 22:24:29 -07:00
wii.c wii: bootwrapper: add fixup to calc useable mem2 2009-12-12 22:24:31 -07:00
wrapper powerpc/ps3: Do not adjust the wrapper load address 2012-03-21 11:16:13 +11:00
zImage.coff.lds.S powerpc/boot: Allow building the zImage wrapper as a relocatable ET_DYN 2011-04-20 16:59:20 +10:00
zImage.lds.S powerpc/boot: Allow building the zImage wrapper as a relocatable ET_DYN 2011-04-20 16:59:20 +10:00
zImage.ps3.lds.S

To extract the kernel vmlinux, System.map, .config or initrd from the zImage binary:

objcopy -j .kernel:vmlinux -O binary zImage vmlinux.gz
objcopy -j .kernel:System.map -O binary zImage System.map.gz
objcopy -j .kernel:.config -O binary zImage config.gz
objcopy -j .kernel:initrd -O binary zImage.initrd initrd.gz


	Peter