mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-26 03:17:48 +00:00
fa7f316735
Added command line option and shost sysfs attribute called mpt2sas_fwfault_debug. When enduser writes a "1" to this parameter, this will enable support in the driver for debugging firmware timeout related issues. This handling was added in three areas (a) scsi error handling callback called task_abort, (b) IOCTL interface, and (c) other timeouts that result in diag resets, such as manufacturing config pages. When this support is enabled, the driver will provide dump_stack to console, halt controller firmware, and panic driver. The end user probably would want to setup serial console redirection so the dump stack can be seen. Here are the three methods for enable this support: (a) # insmod mpt2sas.ko mpt2sas_fwfault_debug=1 (b) # echo 1 > /sys/module/mpt2sas/parameters/mpt2sas_fwfault_debug (c) # echo 1 > /sys/class/scsi_host/host#/fwfault_debug (where # is the host number) Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de> |
||
|---|---|---|
| .. | ||
| mpi | ||
| Kconfig | ||
| Makefile | ||
| mpt2sas_base.c | ||
| mpt2sas_base.h | ||
| mpt2sas_config.c | ||
| mpt2sas_ctl.c | ||
| mpt2sas_ctl.h | ||
| mpt2sas_debug.h | ||
| mpt2sas_scsih.c | ||
| mpt2sas_transport.c | ||