linux/arch/arm
Krzysztof Kozlowski faf9a3eaa1 ARM: dts: Switch max77686 regulators to GPIO control for exynos4412-trats2
Remove fixed regulators (duplicating what max77686 provides) and
add GPIO enable control to max77686 regulators.

This gives the system full control over those regulators. Previously
the state of such regulators was a mixture of what max77686 driver set
over I2C and what regulator-fixed set through GPIO.

Removal of 'regulator-always-on' from CAM_ISP_CORE_1.2V (buck9) allows
disabling it when it is not used. Previously this regulator was always
enabled because its enable state is a OR of:
 - ENB9 GPIO (turned always on by regulator-fixed),
 - BUCK9EN field in BUCK9CTRL register (off by max77686 through I2C).

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-04 07:43:54 +09:00
..
boot ARM: dts: Switch max77686 regulators to GPIO control for exynos4412-trats2 2015-02-04 07:43:54 +09:00
common Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
configs PM: Eliminate CONFIG_PM_RUNTIME 2014-12-19 22:55:06 +01:00
crypto
firmware
include kernel: Provide READ_ONCE and ASSIGN_ONCE 2014-12-20 16:48:59 -08:00
kernel More ACPI and power management updates for 3.19-rc1 2014-12-18 20:28:33 -08:00
kvm 3.19 changes for KVM: 2014-12-18 16:05:28 -08:00
lib
mach-asm9260
mach-at91 ARM: SoC cleanups for 3.19 2014-12-09 14:18:35 -08:00
mach-axxia
mach-bcm Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2014-12-10 08:38:57 -08:00
mach-berlin
mach-clps711x
mach-cns3xxx
mach-davinci More ACPI and power management updates for 3.19-rc1 2014-12-18 20:28:33 -08:00
mach-dove
mach-ebsa110
mach-efm32
mach-ep93xx
mach-exynos More ACPI and power management updates for 3.19-rc1 2014-12-18 20:28:33 -08:00
mach-footbridge
mach-gemini
mach-highbank
mach-hisi
mach-imx Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
mach-integrator
mach-iop13xx
mach-iop32x
mach-iop33x
mach-ixp4xx
mach-keystone ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM 2014-12-13 00:42:49 +01:00
mach-ks8695
mach-lpc32xx
mach-mediatek ARM: SoC DT updates for 3.19 2014-12-09 14:57:37 -08:00
mach-meson
mach-mmp Please consider pulling the clk framework changes toward 3.19. It is 2014-12-20 16:42:36 -08:00
mach-moxart
mach-msm
mach-mv78xx0
mach-mvebu ARM: mvebu: use the cpufreq-dt platform_data for independent clocks 2014-12-04 17:31:32 +01:00
mach-mxs
mach-netx
mach-nomadik
mach-nspire
mach-omap1 ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM 2014-12-13 00:42:49 +01:00
mach-omap2 Please consider pulling the clk framework changes toward 3.19. It is 2014-12-20 16:42:36 -08:00
mach-orion5x
mach-picoxcell
mach-prima2
mach-pxa Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
mach-qcom
mach-realview
mach-rockchip
mach-rpc
mach-s3c24xx Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
mach-s3c64xx
mach-s5pv210
mach-sa1100 Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
mach-shmobile Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux 2014-12-15 15:52:01 -08:00
mach-socfpga
mach-spear
mach-sti
mach-sunxi
mach-tegra ACPI and power management updates for 3.19-rc1 2014-12-10 21:17:00 -08:00
mach-u300 Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
mach-ux500
mach-versatile
mach-vexpress
mach-vt8500
mach-w90x900
mach-zynq
mm ARM: SoC/iommu configuration for 3.19 2014-12-16 14:53:01 -08:00
net
nwfpe
oprofile
plat-iop
plat-omap
plat-orion ACPI and power management updates for 3.19-rc1 2014-12-10 21:17:00 -08:00
plat-pxa
plat-samsung Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
plat-versatile
tools
vfp
xen xen/arm: introduce GNTTABOP_cache_flush 2014-12-04 12:41:54 +00:00
Kconfig Merge branch 'akpm' (second patch-bomb from Andrew) 2014-12-13 13:00:36 -08:00
Kconfig-nommu
Kconfig.debug Char/Misc driver patches for 3.19-rc1 2014-12-14 16:43:47 -08:00
Makefile