linux/drivers/clk/nxp/clk-lpc18xx-cgu.c
Joachim Eastwood c23a584769 clk: lpc18xx-cgu: fix potential system hang when disabling unused clocks
The clock consumer (CCU) of the CGU must be able to check if a CGU
base clock is really running since access to the CCU registers
requires a running base clock. Access with a disabled base clock will
cause the system to hang. Fix this issue by adding code that check if
the parent clock is running in the is_enabled clk_ops callback. Since
certain clocks can be cascaded this must be added to all clock gates.

The hang would occur if the boot ROM or boot loader didn't setup and
enable the USB0 clock. Then when the clk framework tried to access
the CCU register it would hang the system.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-26 12:36:58 -07:00

671 lines
19 KiB
C

/*
* Clk driver for NXP LPC18xx/LPC43xx Clock Generation Unit (CGU)
*
* Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <dt-bindings/clock/lpc18xx-cgu.h>
/* Clock Generation Unit (CGU) registers */
#define LPC18XX_CGU_XTAL_OSC_CTRL 0x018
#define LPC18XX_CGU_PLL0USB_STAT 0x01c
#define LPC18XX_CGU_PLL0USB_CTRL 0x020
#define LPC18XX_CGU_PLL0USB_MDIV 0x024
#define LPC18XX_CGU_PLL0USB_NP_DIV 0x028
#define LPC18XX_CGU_PLL0AUDIO_STAT 0x02c
#define LPC18XX_CGU_PLL0AUDIO_CTRL 0x030
#define LPC18XX_CGU_PLL0AUDIO_MDIV 0x034
#define LPC18XX_CGU_PLL0AUDIO_NP_DIV 0x038
#define LPC18XX_CGU_PLL0AUDIO_FRAC 0x03c
#define LPC18XX_CGU_PLL1_STAT 0x040
#define LPC18XX_CGU_PLL1_CTRL 0x044
#define LPC18XX_PLL1_CTRL_FBSEL BIT(6)
#define LPC18XX_PLL1_CTRL_DIRECT BIT(7)
#define LPC18XX_CGU_IDIV_CTRL(n) (0x048 + (n) * sizeof(u32))
#define LPC18XX_CGU_BASE_CLK(id) (0x05c + (id) * sizeof(u32))
#define LPC18XX_CGU_PLL_CTRL_OFFSET 0x4
/* PLL0 bits common to both audio and USB PLL */
#define LPC18XX_PLL0_STAT_LOCK BIT(0)
#define LPC18XX_PLL0_CTRL_PD BIT(0)
#define LPC18XX_PLL0_CTRL_BYPASS BIT(1)
#define LPC18XX_PLL0_CTRL_DIRECTI BIT(2)
#define LPC18XX_PLL0_CTRL_DIRECTO BIT(3)
#define LPC18XX_PLL0_CTRL_CLKEN BIT(4)
#define LPC18XX_PLL0_MDIV_MDEC_MASK 0x1ffff
#define LPC18XX_PLL0_MDIV_SELP_SHIFT 17
#define LPC18XX_PLL0_MDIV_SELI_SHIFT 22
#define LPC18XX_PLL0_MSEL_MAX BIT(15)
/* Register value that gives PLL0 post/pre dividers equal to 1 */
#define LPC18XX_PLL0_NP_DIVS_1 0x00302062
enum {
CLK_SRC_OSC32,
CLK_SRC_IRC,
CLK_SRC_ENET_RX_CLK,
CLK_SRC_ENET_TX_CLK,
CLK_SRC_GP_CLKIN,
CLK_SRC_RESERVED1,
CLK_SRC_OSC,
CLK_SRC_PLL0USB,
CLK_SRC_PLL0AUDIO,
CLK_SRC_PLL1,
CLK_SRC_RESERVED2,
CLK_SRC_RESERVED3,
CLK_SRC_IDIVA,
CLK_SRC_IDIVB,
CLK_SRC_IDIVC,
CLK_SRC_IDIVD,
CLK_SRC_IDIVE,
CLK_SRC_MAX
};
static const char *clk_src_names[CLK_SRC_MAX] = {
[CLK_SRC_OSC32] = "osc32",
[CLK_SRC_IRC] = "irc",
[CLK_SRC_ENET_RX_CLK] = "enet_rx_clk",
[CLK_SRC_ENET_TX_CLK] = "enet_tx_clk",
[CLK_SRC_GP_CLKIN] = "gp_clkin",
[CLK_SRC_OSC] = "osc",
[CLK_SRC_PLL0USB] = "pll0usb",
[CLK_SRC_PLL0AUDIO] = "pll0audio",
[CLK_SRC_PLL1] = "pll1",
[CLK_SRC_IDIVA] = "idiva",
[CLK_SRC_IDIVB] = "idivb",
[CLK_SRC_IDIVC] = "idivc",
[CLK_SRC_IDIVD] = "idivd",
[CLK_SRC_IDIVE] = "idive",
};
static const char *clk_base_names[BASE_CLK_MAX] = {
[BASE_SAFE_CLK] = "base_safe_clk",
[BASE_USB0_CLK] = "base_usb0_clk",
[BASE_PERIPH_CLK] = "base_periph_clk",
[BASE_USB1_CLK] = "base_usb1_clk",
[BASE_CPU_CLK] = "base_cpu_clk",
[BASE_SPIFI_CLK] = "base_spifi_clk",
[BASE_SPI_CLK] = "base_spi_clk",
[BASE_PHY_RX_CLK] = "base_phy_rx_clk",
[BASE_PHY_TX_CLK] = "base_phy_tx_clk",
[BASE_APB1_CLK] = "base_apb1_clk",
[BASE_APB3_CLK] = "base_apb3_clk",
[BASE_LCD_CLK] = "base_lcd_clk",
[BASE_ADCHS_CLK] = "base_adchs_clk",
[BASE_SDIO_CLK] = "base_sdio_clk",
[BASE_SSP0_CLK] = "base_ssp0_clk",
[BASE_SSP1_CLK] = "base_ssp1_clk",
[BASE_UART0_CLK] = "base_uart0_clk",
[BASE_UART1_CLK] = "base_uart1_clk",
[BASE_UART2_CLK] = "base_uart2_clk",
[BASE_UART3_CLK] = "base_uart3_clk",
[BASE_OUT_CLK] = "base_out_clk",
[BASE_AUDIO_CLK] = "base_audio_clk",
[BASE_CGU_OUT0_CLK] = "base_cgu_out0_clk",
[BASE_CGU_OUT1_CLK] = "base_cgu_out1_clk",
};
static u32 lpc18xx_cgu_pll0_src_ids[] = {
CLK_SRC_OSC32, CLK_SRC_IRC, CLK_SRC_ENET_RX_CLK,
CLK_SRC_ENET_TX_CLK, CLK_SRC_GP_CLKIN, CLK_SRC_OSC,
CLK_SRC_PLL1, CLK_SRC_IDIVA, CLK_SRC_IDIVB, CLK_SRC_IDIVC,
CLK_SRC_IDIVD, CLK_SRC_IDIVE,
};
static u32 lpc18xx_cgu_pll1_src_ids[] = {
CLK_SRC_OSC32, CLK_SRC_IRC, CLK_SRC_ENET_RX_CLK,
CLK_SRC_ENET_TX_CLK, CLK_SRC_GP_CLKIN, CLK_SRC_OSC,
CLK_SRC_PLL0USB, CLK_SRC_PLL0AUDIO, CLK_SRC_IDIVA,
CLK_SRC_IDIVB, CLK_SRC_IDIVC, CLK_SRC_IDIVD, CLK_SRC_IDIVE,
};
static u32 lpc18xx_cgu_idiva_src_ids[] = {
CLK_SRC_OSC32, CLK_SRC_IRC, CLK_SRC_ENET_RX_CLK,
CLK_SRC_ENET_TX_CLK, CLK_SRC_GP_CLKIN, CLK_SRC_OSC,
CLK_SRC_PLL0USB, CLK_SRC_PLL0AUDIO, CLK_SRC_PLL1
};
static u32 lpc18xx_cgu_idivbcde_src_ids[] = {
CLK_SRC_OSC32, CLK_SRC_IRC, CLK_SRC_ENET_RX_CLK,
CLK_SRC_ENET_TX_CLK, CLK_SRC_GP_CLKIN, CLK_SRC_OSC,
CLK_SRC_PLL0AUDIO, CLK_SRC_PLL1, CLK_SRC_IDIVA,
};
static u32 lpc18xx_cgu_base_irc_src_ids[] = {CLK_SRC_IRC};
static u32 lpc18xx_cgu_base_usb0_src_ids[] = {CLK_SRC_PLL0USB};
static u32 lpc18xx_cgu_base_common_src_ids[] = {
CLK_SRC_OSC32, CLK_SRC_IRC, CLK_SRC_ENET_RX_CLK,
CLK_SRC_ENET_TX_CLK, CLK_SRC_GP_CLKIN, CLK_SRC_OSC,
CLK_SRC_PLL0AUDIO, CLK_SRC_PLL1, CLK_SRC_IDIVA,
CLK_SRC_IDIVB, CLK_SRC_IDIVC, CLK_SRC_IDIVD, CLK_SRC_IDIVE,
};
static u32 lpc18xx_cgu_base_all_src_ids[] = {
CLK_SRC_OSC32, CLK_SRC_IRC, CLK_SRC_ENET_RX_CLK,
CLK_SRC_ENET_TX_CLK, CLK_SRC_GP_CLKIN, CLK_SRC_OSC,
CLK_SRC_PLL0USB, CLK_SRC_PLL0AUDIO, CLK_SRC_PLL1,
CLK_SRC_IDIVA, CLK_SRC_IDIVB, CLK_SRC_IDIVC,
CLK_SRC_IDIVD, CLK_SRC_IDIVE,
};
struct lpc18xx_cgu_src_clk_div {
u8 clk_id;
u8 n_parents;
struct clk_divider div;
struct clk_mux mux;
struct clk_gate gate;
};
#define LPC1XX_CGU_SRC_CLK_DIV(_id, _width, _table) \
{ \
.clk_id = CLK_SRC_ ##_id, \
.n_parents = ARRAY_SIZE(lpc18xx_cgu_ ##_table), \
.div = { \
.shift = 2, \
.width = _width, \
}, \
.mux = { \
.mask = 0x1f, \
.shift = 24, \
.table = lpc18xx_cgu_ ##_table, \
}, \
.gate = { \
.bit_idx = 0, \
.flags = CLK_GATE_SET_TO_DISABLE, \
}, \
}
static struct lpc18xx_cgu_src_clk_div lpc18xx_cgu_src_clk_divs[] = {
LPC1XX_CGU_SRC_CLK_DIV(IDIVA, 2, idiva_src_ids),
LPC1XX_CGU_SRC_CLK_DIV(IDIVB, 4, idivbcde_src_ids),
LPC1XX_CGU_SRC_CLK_DIV(IDIVC, 4, idivbcde_src_ids),
LPC1XX_CGU_SRC_CLK_DIV(IDIVD, 4, idivbcde_src_ids),
LPC1XX_CGU_SRC_CLK_DIV(IDIVE, 8, idivbcde_src_ids),
};
struct lpc18xx_cgu_base_clk {
u8 clk_id;
u8 n_parents;
struct clk_mux mux;
struct clk_gate gate;
};
#define LPC1XX_CGU_BASE_CLK(_id, _table, _flags) \
{ \
.clk_id = BASE_ ##_id ##_CLK, \
.n_parents = ARRAY_SIZE(lpc18xx_cgu_ ##_table), \
.mux = { \
.mask = 0x1f, \
.shift = 24, \
.table = lpc18xx_cgu_ ##_table, \
.flags = _flags, \
}, \
.gate = { \
.bit_idx = 0, \
.flags = CLK_GATE_SET_TO_DISABLE, \
}, \
}
static struct lpc18xx_cgu_base_clk lpc18xx_cgu_base_clks[] = {
LPC1XX_CGU_BASE_CLK(SAFE, base_irc_src_ids, CLK_MUX_READ_ONLY),
LPC1XX_CGU_BASE_CLK(USB0, base_usb0_src_ids, 0),
LPC1XX_CGU_BASE_CLK(PERIPH, base_common_src_ids, 0),
LPC1XX_CGU_BASE_CLK(USB1, base_all_src_ids, 0),
LPC1XX_CGU_BASE_CLK(CPU, base_common_src_ids, 0),
LPC1XX_CGU_BASE_CLK(SPIFI, base_common_src_ids, 0),
LPC1XX_CGU_BASE_CLK(SPI, base_common_src_ids, 0),
LPC1XX_CGU_BASE_CLK(PHY_RX, base_common_src_ids, 0),
LPC1XX_CGU_BASE_CLK(PHY_TX, base_common_src_ids, 0),
LPC1XX_CGU_BASE_CLK(APB1, base_common_src_ids, 0),
LPC1XX_CGU_BASE_CLK(APB3, base_common_src_ids, 0),
LPC1XX_CGU_BASE_CLK(LCD, base_common_src_ids, 0),
LPC1XX_CGU_BASE_CLK(ADCHS, base_common_src_ids, 0),
LPC1XX_CGU_BASE_CLK(SDIO, base_common_src_ids, 0),
LPC1XX_CGU_BASE_CLK(SSP0, base_common_src_ids, 0),
LPC1XX_CGU_BASE_CLK(SSP1, base_common_src_ids, 0),
LPC1XX_CGU_BASE_CLK(UART0, base_common_src_ids, 0),
LPC1XX_CGU_BASE_CLK(UART1, base_common_src_ids, 0),
LPC1XX_CGU_BASE_CLK(UART2, base_common_src_ids, 0),
LPC1XX_CGU_BASE_CLK(UART3, base_common_src_ids, 0),
LPC1XX_CGU_BASE_CLK(OUT, base_all_src_ids, 0),
{ /* 21 reserved */ },
{ /* 22 reserved */ },
{ /* 23 reserved */ },
{ /* 24 reserved */ },
LPC1XX_CGU_BASE_CLK(AUDIO, base_common_src_ids, 0),
LPC1XX_CGU_BASE_CLK(CGU_OUT0, base_all_src_ids, 0),
LPC1XX_CGU_BASE_CLK(CGU_OUT1, base_all_src_ids, 0),
};
struct lpc18xx_pll {
struct clk_hw hw;
void __iomem *reg;
spinlock_t *lock;
u8 flags;
};
#define to_lpc_pll(hw) container_of(hw, struct lpc18xx_pll, hw)
struct lpc18xx_cgu_pll_clk {
u8 clk_id;
u8 n_parents;
u8 reg_offset;
struct clk_mux mux;
struct clk_gate gate;
struct lpc18xx_pll pll;
const struct clk_ops *pll_ops;
};
#define LPC1XX_CGU_CLK_PLL(_id, _table, _pll_ops) \
{ \
.clk_id = CLK_SRC_ ##_id, \
.n_parents = ARRAY_SIZE(lpc18xx_cgu_ ##_table), \
.reg_offset = LPC18XX_CGU_ ##_id ##_STAT, \
.mux = { \
.mask = 0x1f, \
.shift = 24, \
.table = lpc18xx_cgu_ ##_table, \
}, \
.gate = { \
.bit_idx = 0, \
.flags = CLK_GATE_SET_TO_DISABLE, \
}, \
.pll_ops = &lpc18xx_ ##_pll_ops, \
}
/*
* PLL0 uses a special register value encoding. The compute functions below
* are taken or derived from the LPC1850 user manual (section 12.6.3.3).
*/
/* Compute PLL0 multiplier from decoded version */
static u32 lpc18xx_pll0_mdec2msel(u32 x)
{
int i;
switch (x) {
case 0x18003: return 1;
case 0x10003: return 2;
default:
for (i = LPC18XX_PLL0_MSEL_MAX + 1; x != 0x4000 && i > 0; i--)
x = ((x ^ x >> 14) & 1) | (x << 1 & 0x7fff);
return i;
}
}
/* Compute PLL0 decoded multiplier from binary version */
static u32 lpc18xx_pll0_msel2mdec(u32 msel)
{
u32 i, x = 0x4000;
switch (msel) {
case 0: return 0;
case 1: return 0x18003;
case 2: return 0x10003;
default:
for (i = msel; i <= LPC18XX_PLL0_MSEL_MAX; i++)
x = ((x ^ x >> 1) & 1) << 14 | (x >> 1 & 0xffff);
return x;
}
}
/* Compute PLL0 bandwidth SELI reg from multiplier */
static u32 lpc18xx_pll0_msel2seli(u32 msel)
{
u32 tmp;
if (msel > 16384) return 1;
if (msel > 8192) return 2;
if (msel > 2048) return 4;
if (msel >= 501) return 8;
if (msel >= 60) {
tmp = 1024 / (msel + 9);
return ((1024 == (tmp * (msel + 9))) == 0) ? tmp * 4 : (tmp + 1) * 4;
}
return (msel & 0x3c) + 4;
}
/* Compute PLL0 bandwidth SELP reg from multiplier */
static u32 lpc18xx_pll0_msel2selp(u32 msel)
{
if (msel < 60)
return (msel >> 1) + 1;
return 31;
}
static unsigned long lpc18xx_pll0_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct lpc18xx_pll *pll = to_lpc_pll(hw);
u32 ctrl, mdiv, msel, npdiv;
ctrl = clk_readl(pll->reg + LPC18XX_CGU_PLL0USB_CTRL);
mdiv = clk_readl(pll->reg + LPC18XX_CGU_PLL0USB_MDIV);
npdiv = clk_readl(pll->reg + LPC18XX_CGU_PLL0USB_NP_DIV);
if (ctrl & LPC18XX_PLL0_CTRL_BYPASS)
return parent_rate;
if (npdiv != LPC18XX_PLL0_NP_DIVS_1) {
pr_warn("%s: pre/post dividers not supported\n", __func__);
return 0;
}
msel = lpc18xx_pll0_mdec2msel(mdiv & LPC18XX_PLL0_MDIV_MDEC_MASK);
if (msel)
return 2 * msel * parent_rate;
pr_warn("%s: unable to calculate rate\n", __func__);
return 0;
}
static long lpc18xx_pll0_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *prate)
{
unsigned long m;
if (*prate < rate) {
pr_warn("%s: pll dividers not supported\n", __func__);
return -EINVAL;
}
m = DIV_ROUND_UP_ULL(*prate, rate * 2);
if (m <= 0 && m > LPC18XX_PLL0_MSEL_MAX) {
pr_warn("%s: unable to support rate %lu\n", __func__, rate);
return -EINVAL;
}
return 2 * *prate * m;
}
static int lpc18xx_pll0_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct lpc18xx_pll *pll = to_lpc_pll(hw);
u32 ctrl, stat, m;
int retry = 3;
if (parent_rate < rate) {
pr_warn("%s: pll dividers not supported\n", __func__);
return -EINVAL;
}
m = DIV_ROUND_UP_ULL(parent_rate, rate * 2);
if (m <= 0 && m > LPC18XX_PLL0_MSEL_MAX) {
pr_warn("%s: unable to support rate %lu\n", __func__, rate);
return -EINVAL;
}
m = lpc18xx_pll0_msel2mdec(m);
m |= lpc18xx_pll0_msel2selp(m) << LPC18XX_PLL0_MDIV_SELP_SHIFT;
m |= lpc18xx_pll0_msel2seli(m) << LPC18XX_PLL0_MDIV_SELI_SHIFT;
/* Power down PLL, disable clk output and dividers */
ctrl = clk_readl(pll->reg + LPC18XX_CGU_PLL0USB_CTRL);
ctrl |= LPC18XX_PLL0_CTRL_PD;
ctrl &= ~(LPC18XX_PLL0_CTRL_BYPASS | LPC18XX_PLL0_CTRL_DIRECTI |
LPC18XX_PLL0_CTRL_DIRECTO | LPC18XX_PLL0_CTRL_CLKEN);
clk_writel(ctrl, pll->reg + LPC18XX_CGU_PLL0USB_CTRL);
/* Configure new PLL settings */
clk_writel(m, pll->reg + LPC18XX_CGU_PLL0USB_MDIV);
clk_writel(LPC18XX_PLL0_NP_DIVS_1, pll->reg + LPC18XX_CGU_PLL0USB_NP_DIV);
/* Power up PLL and wait for lock */
ctrl &= ~LPC18XX_PLL0_CTRL_PD;
clk_writel(ctrl, pll->reg + LPC18XX_CGU_PLL0USB_CTRL);
do {
udelay(10);
stat = clk_readl(pll->reg + LPC18XX_CGU_PLL0USB_STAT);
if (stat & LPC18XX_PLL0_STAT_LOCK) {
ctrl |= LPC18XX_PLL0_CTRL_CLKEN;
clk_writel(ctrl, pll->reg + LPC18XX_CGU_PLL0USB_CTRL);
return 0;
}
} while (retry--);
pr_warn("%s: unable to lock pll\n", __func__);
return -EINVAL;
}
static const struct clk_ops lpc18xx_pll0_ops = {
.recalc_rate = lpc18xx_pll0_recalc_rate,
.round_rate = lpc18xx_pll0_round_rate,
.set_rate = lpc18xx_pll0_set_rate,
};
static unsigned long lpc18xx_pll1_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct lpc18xx_pll *pll = to_lpc_pll(hw);
u16 msel, nsel, psel;
bool direct, fbsel;
u32 stat, ctrl;
stat = clk_readl(pll->reg + LPC18XX_CGU_PLL1_STAT);
ctrl = clk_readl(pll->reg + LPC18XX_CGU_PLL1_CTRL);
direct = (ctrl & LPC18XX_PLL1_CTRL_DIRECT) ? true : false;
fbsel = (ctrl & LPC18XX_PLL1_CTRL_FBSEL) ? true : false;
msel = ((ctrl >> 16) & 0xff) + 1;
nsel = ((ctrl >> 12) & 0x3) + 1;
if (direct || fbsel)
return msel * (parent_rate / nsel);
psel = (ctrl >> 8) & 0x3;
psel = 1 << psel;
return (msel / (2 * psel)) * (parent_rate / nsel);
}
static const struct clk_ops lpc18xx_pll1_ops = {
.recalc_rate = lpc18xx_pll1_recalc_rate,
};
static int lpc18xx_cgu_gate_enable(struct clk_hw *hw)
{
return clk_gate_ops.enable(hw);
}
static void lpc18xx_cgu_gate_disable(struct clk_hw *hw)
{
clk_gate_ops.disable(hw);
}
static int lpc18xx_cgu_gate_is_enabled(struct clk_hw *hw)
{
const struct clk_hw *parent;
/*
* The consumer of base clocks needs know if the
* base clock is really enabled before it can be
* accessed. It is therefore necessary to verify
* this all the way up.
*/
parent = clk_hw_get_parent(hw);
if (!parent)
return 0;
if (!clk_hw_is_enabled(parent))
return 0;
return clk_gate_ops.is_enabled(hw);
}
static const struct clk_ops lpc18xx_gate_ops = {
.enable = lpc18xx_cgu_gate_enable,
.disable = lpc18xx_cgu_gate_disable,
.is_enabled = lpc18xx_cgu_gate_is_enabled,
};
static struct lpc18xx_cgu_pll_clk lpc18xx_cgu_src_clk_plls[] = {
LPC1XX_CGU_CLK_PLL(PLL0USB, pll0_src_ids, pll0_ops),
LPC1XX_CGU_CLK_PLL(PLL0AUDIO, pll0_src_ids, pll0_ops),
LPC1XX_CGU_CLK_PLL(PLL1, pll1_src_ids, pll1_ops),
};
static void lpc18xx_fill_parent_names(const char **parent, u32 *id, int size)
{
int i;
for (i = 0; i < size; i++)
parent[i] = clk_src_names[id[i]];
}
static struct clk *lpc18xx_cgu_register_div(struct lpc18xx_cgu_src_clk_div *clk,
void __iomem *base, int n)
{
void __iomem *reg = base + LPC18XX_CGU_IDIV_CTRL(n);
const char *name = clk_src_names[clk->clk_id];
const char *parents[CLK_SRC_MAX];
clk->div.reg = reg;
clk->mux.reg = reg;
clk->gate.reg = reg;
lpc18xx_fill_parent_names(parents, clk->mux.table, clk->n_parents);
return clk_register_composite(NULL, name, parents, clk->n_parents,
&clk->mux.hw, &clk_mux_ops,
&clk->div.hw, &clk_divider_ops,
&clk->gate.hw, &lpc18xx_gate_ops, 0);
}
static struct clk *lpc18xx_register_base_clk(struct lpc18xx_cgu_base_clk *clk,
void __iomem *reg_base, int n)
{
void __iomem *reg = reg_base + LPC18XX_CGU_BASE_CLK(n);
const char *name = clk_base_names[clk->clk_id];
const char *parents[CLK_SRC_MAX];
if (clk->n_parents == 0)
return ERR_PTR(-ENOENT);
clk->mux.reg = reg;
clk->gate.reg = reg;
lpc18xx_fill_parent_names(parents, clk->mux.table, clk->n_parents);
/* SAFE_CLK can not be turned off */
if (n == BASE_SAFE_CLK)
return clk_register_composite(NULL, name, parents, clk->n_parents,
&clk->mux.hw, &clk_mux_ops,
NULL, NULL, NULL, NULL, 0);
return clk_register_composite(NULL, name, parents, clk->n_parents,
&clk->mux.hw, &clk_mux_ops,
NULL, NULL,
&clk->gate.hw, &lpc18xx_gate_ops, 0);
}
static struct clk *lpc18xx_cgu_register_pll(struct lpc18xx_cgu_pll_clk *clk,
void __iomem *base)
{
const char *name = clk_src_names[clk->clk_id];
const char *parents[CLK_SRC_MAX];
clk->pll.reg = base;
clk->mux.reg = base + clk->reg_offset + LPC18XX_CGU_PLL_CTRL_OFFSET;
clk->gate.reg = base + clk->reg_offset + LPC18XX_CGU_PLL_CTRL_OFFSET;
lpc18xx_fill_parent_names(parents, clk->mux.table, clk->n_parents);
return clk_register_composite(NULL, name, parents, clk->n_parents,
&clk->mux.hw, &clk_mux_ops,
&clk->pll.hw, clk->pll_ops,
&clk->gate.hw, &lpc18xx_gate_ops, 0);
}
static void __init lpc18xx_cgu_register_source_clks(struct device_node *np,
void __iomem *base)
{
const char *parents[CLK_SRC_MAX];
struct clk *clk;
int i;
/* Register the internal 12 MHz RC oscillator (IRC) */
clk = clk_register_fixed_rate(NULL, clk_src_names[CLK_SRC_IRC],
NULL, CLK_IS_ROOT, 12000000);
if (IS_ERR(clk))
pr_warn("%s: failed to register irc clk\n", __func__);
/* Register crystal oscillator controlller */
parents[0] = of_clk_get_parent_name(np, 0);
clk = clk_register_gate(NULL, clk_src_names[CLK_SRC_OSC], parents[0],
0, base + LPC18XX_CGU_XTAL_OSC_CTRL,
0, CLK_GATE_SET_TO_DISABLE, NULL);
if (IS_ERR(clk))
pr_warn("%s: failed to register osc clk\n", __func__);
/* Register all PLLs */
for (i = 0; i < ARRAY_SIZE(lpc18xx_cgu_src_clk_plls); i++) {
clk = lpc18xx_cgu_register_pll(&lpc18xx_cgu_src_clk_plls[i],
base);
if (IS_ERR(clk))
pr_warn("%s: failed to register pll (%d)\n", __func__, i);
}
/* Register all clock dividers A-E */
for (i = 0; i < ARRAY_SIZE(lpc18xx_cgu_src_clk_divs); i++) {
clk = lpc18xx_cgu_register_div(&lpc18xx_cgu_src_clk_divs[i],
base, i);
if (IS_ERR(clk))
pr_warn("%s: failed to register div %d\n", __func__, i);
}
}
static struct clk *clk_base[BASE_CLK_MAX];
static struct clk_onecell_data clk_base_data = {
.clks = clk_base,
.clk_num = BASE_CLK_MAX,
};
static void __init lpc18xx_cgu_register_base_clks(void __iomem *reg_base)
{
int i;
for (i = BASE_SAFE_CLK; i < BASE_CLK_MAX; i++) {
clk_base[i] = lpc18xx_register_base_clk(&lpc18xx_cgu_base_clks[i],
reg_base, i);
if (IS_ERR(clk_base[i]) && PTR_ERR(clk_base[i]) != -ENOENT)
pr_warn("%s: register base clk %d failed\n", __func__, i);
}
}
static void __init lpc18xx_cgu_init(struct device_node *np)
{
void __iomem *reg_base;
reg_base = of_iomap(np, 0);
if (!reg_base) {
pr_warn("%s: failed to map address range\n", __func__);
return;
}
lpc18xx_cgu_register_source_clks(np, reg_base);
lpc18xx_cgu_register_base_clks(reg_base);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_base_data);
}
CLK_OF_DECLARE(lpc18xx_cgu, "nxp,lpc1850-cgu", lpc18xx_cgu_init);