Preliminary patch to removing the return value of Place, as it is always
NS_OK. The logic associated with it being false has also been removed,
along with DidReflowChildren, which was only called in these paths.
Differential Revision: https://phabricator.services.mozilla.com/D265801
`MutationEvent_Bindings::MODIFICATION`,
`MutationEvent_Bindings::ADDITION` and `MutationEvent_Bindings::REMOVAL`
will be removed. Therefore, we need alternative `enum class` for that.
This patch makes `nsIFrame` and subclasses use the new one.
Differential Revision: https://phabricator.services.mozilla.com/D263053
This patch implements support for the width/height properties on
MathML elements [1]. The general algorithm from the spec is as
follows:
(1) The outcome of the math layout is a "math content box".
(2) The content box sets its size from computed width/height values. If
auto, it's the one of the "math content box". This patch ignores
percentage values for now [2] [3].
(3) math content box is shifted so that its inline-start and top edges
aligns with the ones of the content box. There are exceptions
elements like mfrac and munder/mover/munderover which instead
horizontally center the math content box within the content box.
For baseline adjustment, we follow what Chromium does, see [4].
(4) Padding+border are added around the content box. Note that we
ignore the box-sizing property for now [5].
The patch essentially tweaks the various MathML layout algorithms to
perform steps (3) and (4) before the calls to
GetBorderPaddingForPlace and InflateReflowAndBoundingMetrics.
[1] https://w3c.github.io/mathml-core/#layout-algorithms
[2] https://github.com/w3c/mathml-core/issues/76
[3] https://github.com/w3c/mathml-core/issues/77
[4] https://github.com/w3c/mathml-core/issues/259
[5] https://github.com/w3c/mathml-core/issues/257
Below is more information about test coverage:
- width-height-001: Verify that width, height, inline-size and block-size
properties sets the size of the content box. This test used to verify
they are ignored, this patch fixes the `<meta name="assert">` tag.
It also adds a test for the case the specified size is smaller than the
content (we force non empty descendants to make sure this content is
large enough) and to verify the width is used for the preferred width.
- width-height-002, width-height-003: These are reftests visually checking
offsets of the math content box within a larger content box (specified
by width/height) for the mtext, mrow, mpadded, mfrac, msqrt, mroot,
in LTR/RTL modes. In particular they allow to verify some painted
elements like fraction bar and radical symbols.
- width-height-004: This test more directly checks that the math content
box is horizontally centered within a larger content box for munder,
mover, munderover and mfrac. This patch extends the test to cover the
case when the math content box is wider (i.e. overflowing outside the
content box) and removes unnecessary specified height.
- width-height-005: New test for other layout algorithm that don't
center the math content box, checking inline-start edges of children
when a width is specified. We check both LTR/RTL modes and
wider/narrower content boxes.
- width-height-006: Same but checking the top edges for larger/smaller
height and verifying that baseline is perserved.
Differential Revision: https://phabricator.services.mozilla.com/D221436
Currently, nsMathMLContainerFrame::AttributeChanged always force a
reflow. This patch removes that behavior tweaks the following derived
classes:
- menclose: Don't mark intrinsic size of descendants dirty, since the
notation is added around the children, only affecting the element's
metrics.
- mfrac: Don't mark intrinsic size dirty for the linethickness
attribute, since it only affects vertical metrics.
- mo: Rebuild 'automatic' data and relayout the entire embellished
operator hierarchy for all operator properties. I haven't checked the
details of the MathML 'automatic' data, so it may be a bit too
aggressive. But at least a reflow is necessary.
- mspace/mpadded: Only mark intrinsic size dirty for the element and
ancestors, and only for attributes affecting vertical metrics. Also
remove `InvalidateFrame()` call since we don't have any display item.
- mtable: Don't force reflow or data rebuild when displaystyle changes.
This was probably needed before displaystyle was re-implemented as
an attribute mapped to the math-style CSS property.
There is at least one dynamic test for each of the MathML
attributes affecting layout and they don't regress after this patch:
https://bugzilla.mozilla.org/show_bug.cgi?id=1918308#c0
Differential Revision: https://phabricator.services.mozilla.com/D221925
The only reasons why we override MeasureForWidth and Reflow in
nsMathMLmpaddedFrame is to make sure attribute parsing is performed.
This patch just uses the implementation of nsMathMLContainerFrame
instead, by lazily parsing the attributes in nsMathMLmpaddedFrame::Place
and adding proper caching & invalidation to make it optimal.
Differential Revision: https://phabricator.services.mozilla.com/D221613
nsMathMLmpaddedFrame parses each of its width, height, depth, lspace and
voffset attribute into three members: a nsCSSValue and int32_t values
representing enumerated values for optional signs and pseudo-units. This
commit rewrites them as a struct containing a nsCSSValue and two uint8_t
enum classes. One value for the sign that was used to indicate that
the attribute is absent or invalid is moved into a separate mIsValid
boolean. There are no behavior changes.
Differential Revision: https://phabricator.services.mozilla.com/D221612
The only reasons why we override MeasureForWidth and Reflow in
nsMathMLmpaddedFrame is to make sure attribute parsing is performed.
This patch just uses the implementation of nsMathMLContainerFrame
instead, by lazily parsing the attributes in nsMathMLmpaddedFrame::Place
and adding proper caching & invalidation to make it optimal.
Differential Revision: https://phabricator.services.mozilla.com/D221613
nsMathMLmpaddedFrame parses each of its width, height, depth, lspace and
voffset attribute into three members: a nsCSSValue and int32_t values
representing enumerated values for optional signs and pseudo-units. This
commit rewrites them as a struct containing a nsCSSValue and two uint8_t
enum classes. One value for the sign that was used to indicate that
the attribute is absent or invalid is moved into a separate mIsValid
boolean. There are no behavior changes.
Differential Revision: https://phabricator.services.mozilla.com/D221612
MathML classes has a few Place*() methods used for layout and intrinsic
size calculation. These methods have a parameter "aPlaceOrigin"
indicating whether the children and other painted objects should have
their final positions set, or if the method is only called for measuring.
This parameter is typically set to false when doing intrinsic size
calculation or when performing some non-final measurement for operator
stretching.
For intrinsic size calculation, it is generally enough to perform
placement with aPlaceOrigin=false and ignoring the vertical metrics.
Some Place*() methods also have a parameter "aWidthOnly" for special
handling. For example, msqrt stretches a radical symbol vertically to
match the height of the content but when doing intrinsic size
calculation this is approximated to nsMathMLChar::GetMaxWidth() instead.
When we implement border/padding/margin we should also be able to
choose between using IntrinsicISizeOffsets() or GetUsed*() methods.
Finally, some Place*() methods initially call a place routing of a
parent class before further tweaking the layout. For example, msqrt
uses mrow layout on children and adds some radical symbol on top of
them. When we implement border/padding, we should make sure we don't
add the border/padding before the final result.
In order to handle all these placement behaviors, a new EnumSet is
introduced. This commit does not change behavior. Handling of padding,
border and margin will be handled in follow-up patches.
Differential Revision: https://phabricator.services.mozilla.com/D216669
MathML classes has a few Place*() methods used for layout and intrinsic
size calculation. These methods have a parameter "aPlaceOrigin"
indicating whether the children and other painted objects should have
their final positions set, or if the method is only called for measuring.
This parameter is typically set to false when doing intrinsic size
calculation or when performing some non-final measurement for operator
stretching.
For intrinsic size calculation, it is generally enough to perform
placement with aPlaceOrigin=false and ignoring the vertical metrics.
Some Place*() methods also have a parameter "aWidthOnly" for special
handling. For example, msqrt stretches a radical symbol vertically to
match the height of the content but when doing intrinsic size
calculation this is approximated to nsMathMLChar::GetMaxWidth() instead.
When we implement border/padding/margin we should also be able to
choose between using IntrinsicISizeOffsets() or GetUsed*() methods.
Finally, some Place*() methods initially call a place routing of a
parent class before further tweaking the layout. For example, msqrt
uses mrow layout on children and adds some radical symbol on top of
them. When we implement border/padding, we should make sure we don't
add the border/padding before the final result.
In order to handle all these placement behaviors, a new EnumSet is
introduced. This commit does not change behavior. Handling of padding,
border and margin will be handled in follow-up patches.
Differential Revision: https://phabricator.services.mozilla.com/D216669
MathML classes has a few Place*() methods used for layout and intrinsic
size calculation. These methods have a parameter "aPlaceOrigin"
indicating whether the children and other painted objects should have
their final positions set, or if the method is only called for measuring.
This parameter is typically set to false when doing intrinsic size
calculation or when performing some non-final measurement for operator
stretching.
For intrinsic size calculation, it is generally enough to perform
placement with aPlaceOrigin=false and ignoring the vertical metrics.
Some Place*() methods also have a parameter "aWidthOnly" for special
handling. For example, msqrt stretches a radical symbol vertically to
match the height of the content but when doing intrinsic size
calculation this is approximated to nsMathMLChar::GetMaxWidth() instead.
When we implement border/padding/margin we should also be able to
choose between using IntrinsicISizeOffsets() or GetUsed*() methods.
Finally, some Place*() methods initially call a place routing of a
parent class before further tweaking the layout. For example, msqrt
uses mrow layout on children and adds some radical symbol on top of
them. When we implement border/padding, we should make sure we don't
add the border/padding before the final result.
In order to handle all these placement behaviors, a new EnumSet is
introduced. This commit does not change behavior. Handling of padding,
border and margin will be handled in follow-up patches.
Differential Revision: https://phabricator.services.mozilla.com/D216669
We have more readable and faster versions (that just omit the namespace
arg).
Mostly done via sed, with a couple helpers to use the faster lookups
where possible.
Differential Revision: https://phabricator.services.mozilla.com/D181795
Build errors fixed here:
layout/mathml/nsMathMLmpaddedFrame.h:68:14: error: field has incomplete type 'nsCSSValue'
* Fixed by including this type's header.
[various files]: error: use of undeclared identifier 'nsLayoutUtils'
* Fixed by including the nsLayoutUtils header.
[various files]: error: member access into incomplete type 'mozilla::dom::Element'
* These are for calls to [something]->AsElement()->HasAttr() and SetAttr(). Fixed by including Element.h in all affected .cpp files.
[various files]: error: member access into incomplete type 'nsINode::Document' (aka 'mozilla::dom::Document')
* These are for calls to mContent->OwnerDoc()->WarnOnceAbout(). Fixed by including Document.h in all affected files.
Depends on D138202
Differential Revision: https://phabricator.services.mozilla.com/D138203
This commit renames nsMathMLElement/nsMathMLElementFactory classes into
MathMLElement/MathMLElementFactory and moves the former into the mozilla::dom
namespace. This is a preliminary step to introduce MathML DOM (bug 1579602).
Code behavior is not changed.
Differential Revision: https://phabricator.services.mozilla.com/D45128
This commit introduces new counters and deprecation warnings for the following
MathML features:
* mathspace names (bug 1575542)
* mathsize names (bug 1548527)
* linethickness names (bug 1548529)
Note: helper parsing functions for mfrac and mpadded are changed to non-static
in order to pass the document parameter needed to log warnings to the console.
Change manually tested with
<math>
<mspace width="thinmathspace"></mspace>
<mpadded width="2thickmathspace"></mpadded>
<mfrac linethickness="thin"><mn>1</mn><mn>2</mn></mfrac>
<mtext mathsize="big">3</mtext>
</math>
Differential Revision: https://phabricator.services.mozilla.com/D42890
Additionally, this patch makes `nsFrame.h` stop including `nsIPresShell.h`
and makes each users include `mozilla/PresShell.h` instead. So, this improves
rebuild performance of `nsIPresShell.h` (and `mozilla/PresShell.h` in the
future).
Note that due to `nsIFrame::PresShell()`, `mozilla::` prefix is necessary for
`PresShell` in a lot of classes which are derived from `nsIFrame` even in
`.cpp` files.
Differential Revision: https://phabricator.services.mozilla.com/D27476
Frédéric Wang Nélar