This method always returned GetMainThreadSerialEventTarget(). This patch
switches all callers over to use that method instead.
We can't easily switch all calls to be calls to NS_GetMainThread(), as there is
no version of that method returning a bare nsIThread* instance.
I didn't introduce one, as we may want to add a lock around mMainThread in the
future, which would require removing nsThreadManager::GetMainThreadWeak. As
this method only returns nsISerialEventTarget, it method could remain
implemented, however, by returning a statically allocated fake event target
which forwards dispatches (and QIs to nsIThread) to the real main thread.
Differential Revision: https://phabricator.services.mozilla.com/D166608
This method always returned GetMainThreadSerialEventTarget(). This patch
switches all callers over to use that method instead.
We can't easily switch all calls to be calls to NS_GetMainThread(), as there is
no version of that method returning a bare nsIThread* instance.
I didn't introduce one, as we may want to add a lock around mMainThread in the
future, which would require removing nsThreadManager::GetMainThreadWeak. As
this method only returns nsISerialEventTarget, it method could remain
implemented, however, by returning a statically allocated fake event target
which forwards dispatches (and QIs to nsIThread) to the real main thread.
Differential Revision: https://phabricator.services.mozilla.com/D166608
This changeset is the result of adding modernize-use-default-member-init to
tools/clang-tidy/config.yaml then proceeding to run
`./mach static-analysis check netwerk/ --fix`
I then went through the resulting fix and manually updated all of the member
variables which were missed due to them having a non-trivial constructor.
Note that the tool was only run on Linux, so code that only runs on some
platforms may have been missed.
The member variables that are still initialized in the contructor definition
are:
- bitfields (not all currently supported compilers allow default-member-init
- variables that are initialized via a parameter
- variables that use code not visible in the header file
There are a few advantages to landing this change:
- fewer lines of code - now declaration is in the same place as initialization
this also makes it easier to see when looking at the header.
- it makes it harder to miss initializing a member when adding a new contructor
- variables that depend on an include guard look much nicer now
Additionally I removed some unnecessary reinitialization of NetAddr members
(it has a constructor that does that now), and changed nsWifiScannerDBus to
use the thread-safe strtok_r instead of strtok.
Differential Revision: https://phabricator.services.mozilla.com/D116980
This changeset is the result of adding modernize-use-default-member-init to
tools/clang-tidy/config.yaml then proceeding to run
`./mach static-analysis check netwerk/ --fix`
I then went through the resulting fix and manually updated all of the member
variables which were missed due to them having a non-trivial constructor.
Note that the tool was only run on Linux, so code that only runs on some
platforms may have been missed.
The member variables that are still initialized in the contructor definition
are:
- bitfields (not all currently supported compilers allow default-member-init
- variables that are initialized via a parameter
- variables that use code not visible in the header file
There are a few advantages to landing this change:
- fewer lines of code - now declaration is in the same place as initialization
this also makes it easier to see when looking at the header.
- it makes it harder to miss initializing a member when adding a new contructor
- variables that depend on an include guard look much nicer now
Additionally I removed some unnecessary reinitialization of NetAddr members
(it has a constructor that does that now), and changed nsWifiScannerDBus to
use the thread-safe strtok_r instead of strtok.
Differential Revision: https://phabricator.services.mozilla.com/D116980
Win32 errors ERROR_DEVICE_HARDWARE_ERROR, ERROR_DEVICE_NOT_CONNECTED, ERROR_DISK_FULL need a mapping.
NS_ERROR_FILE_DISK_FULL is duplicate to NS_ERROR_FILE_NO_DEVICE_SPACE
Drive by: RejectJSPromise lacked some NS_ERROR_* mappings
Differential Revision: https://phabricator.services.mozilla.com/D113974
This makes the naming more consistent with other functions called
Insert and/or Update. Also, it removes the ambiguity whether
Put expects that an entry already exists or not, in particular because
it differed from nsTHashtable::PutEntry in that regard.
Differential Revision: https://phabricator.services.mozilla.com/D105473
There is a possible race condition between CacheFile::OnFileOpened() called on the cache I/O thread as a result of calling CacheFileIOManager::OpenFile() and CacheFile::EntryWouldExceedLimit() and CacheFile::SetMemoryOnly(), both called on main thread from CacheEntry::OpenOutputStream(). Both methods now grab the CacheFile's lock to synchronize the access.
Differential Revision: https://phabricator.services.mozilla.com/D63826
Acquiring the lock is moved from CacheFile::RemoveInput() to CacheFileInputStream::Release(). This fixes the data race and is consistent with CacheFile::RemoveOutput() which is also called under the lock.
Differential Revision: https://phabricator.services.mozilla.com/D62504
This method is called on cache I/O thread while the members are modified usually on the main thread which results in data race.
Differential Revision: https://phabricator.services.mozilla.com/D60367
This was done by:
This was done by applying:
```
diff --git a/python/mozbuild/mozbuild/code-analysis/mach_commands.py b/python/mozbuild/mozbuild/code-analysis/mach_commands.py
index 789affde7bbf..fe33c4c7d4d1 100644
--- a/python/mozbuild/mozbuild/code-analysis/mach_commands.py
+++ b/python/mozbuild/mozbuild/code-analysis/mach_commands.py
@@ -2007,7 +2007,7 @@ class StaticAnalysis(MachCommandBase):
from subprocess import Popen, PIPE, check_output, CalledProcessError
diff_process = Popen(self._get_clang_format_diff_command(commit), stdout=PIPE)
- args = [sys.executable, clang_format_diff, "-p1", "-binary=%s" % clang_format]
+ args = [sys.executable, clang_format_diff, "-p1", "-binary=%s" % clang_format, '-sort-includes']
if not output_file:
args.append("-i")
```
Then running `./mach clang-format -c <commit-hash>`
Then undoing that patch.
Then running check_spidermonkey_style.py --fixup
Then running `./mach clang-format`
I had to fix four things:
* I needed to move <utility> back down in GuardObjects.h because I was hitting
obscure problems with our system include wrappers like this:
0:03.94 /usr/include/stdlib.h:550:14: error: exception specification in declaration does not match previous declaration
0:03.94 extern void *realloc (void *__ptr, size_t __size)
0:03.94 ^
0:03.94 /home/emilio/src/moz/gecko-2/obj-debug/dist/include/malloc_decls.h:53:1: note: previous declaration is here
0:03.94 MALLOC_DECL(realloc, void*, void*, size_t)
0:03.94 ^
0:03.94 /home/emilio/src/moz/gecko-2/obj-debug/dist/include/mozilla/mozalloc.h:22:32: note: expanded from macro 'MALLOC_DECL'
0:03.94 MOZ_MEMORY_API return_type name##_impl(__VA_ARGS__);
0:03.94 ^
0:03.94 <scratch space>:178:1: note: expanded from here
0:03.94 realloc_impl
0:03.94 ^
0:03.94 /home/emilio/src/moz/gecko-2/obj-debug/dist/include/mozmemory_wrap.h:142:41: note: expanded from macro 'realloc_impl'
0:03.94 #define realloc_impl mozmem_malloc_impl(realloc)
Which I really didn't feel like digging into.
* I had to restore the order of TrustOverrideUtils.h and related files in nss
because the .inc files depend on TrustOverrideUtils.h being included earlier.
* I had to add a missing include to RollingNumber.h
* Also had to partially restore include order in JsepSessionImpl.cpp to avoid
some -WError issues due to some static inline functions being defined in a
header but not used in the rest of the compilation unit.
Differential Revision: https://phabricator.services.mozilla.com/D60327
rg -l 'mozilla/Move.h' | xargs sed -i 's/#include "mozilla\/Move.h"/#include <utility>/g'
Further manual fixups and cleanups to the include order incoming.
Differential Revision: https://phabricator.services.mozilla.com/D60323
Whenever a cache entry is accessed during a document load, eTLD+1 of the top level document is added to the entry's metadata. Number of accessing sites is also stored in cache index. So we know how many copies of each entry would we have if we did a first party isolation without data deduplication. The telemetry is sent every time we write 2GB to the cache and then the data is reset. Telemetry report ID is an identifier of the telemetry cycle and it's used to invalidate eTLD+1 hashes in all cache entries.
Differential Revision: https://phabricator.services.mozilla.com/D26425