gecko-dev/cmd/winfe/mapihook.cpp

1612 lines
42 KiB
C++
Raw Normal View History

1998-03-28 02:44:41 +00:00
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
//
// MAPI Hooks for Communicator
// Note: THIS LIVES IN COMMUNICATOR THOUGH IT IS IN THE MAPIDLL FOR
// BUILD REASONS
// Written by: Rich Pizzarro (rhp@netscape.com)
// November 1997
#ifdef NSCPMAPIDLL // Is this part of the DLL or Communicator?
#include <windows.h>
#include <trace.h>
#else
#include "stdafx.h"
#endif
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <sys/stat.h>
#include "wfemsg.h" // for WFE_MSGGetMaster()
#include "msgmapi.h" // For enumerating messages...
#include "nsstrseq.h"
#include "mapihook.h"
#include "nscpmapi.h"
#include "mapismem.h"
#include "mapimail.h"
#include "hiddenfr.h"
#include "msgcom.h"
#define DELIMIT "-{|}-" // DON'T I18N THIS!
//
// Static defines for the MAPI support...
//
static CMAPIConnection *mapiConnections[MAX_CON] = {NULL, NULL, NULL, NULL};
//
// Forward declarations...
//
LONG ProcessMAPILogon(MAPILogonType *logonInfo);
LONG ProcessMAPILogoff(MAPILogoffType *logoffInfo);
LONG ProcessMAPISendMail(MAPISendMailType *sendMailPtr);
LONG ProcessMAPISaveMail(MAPISendMailType *sendMailPtr);
LONG ProcessMAPISendDocuments(MAPISendDocumentsType *sendDocPtr);
LONG ProcessMAPIFindNext(MAPIFindNextType *findInfo);
LONG ProcessMAPIDeleteMail(MAPIDeleteMailType *delInfo);
LONG ProcessMAPIResolveName(MAPIResolveNameType *nameInfo);
LONG ProcessMAPIDetails(MAPIDetailsType *detailInfo);
LONG ProcessMAPIReadMail(MAPIReadMailType *readInfo);
LONG ProcessMAPIAddress(MAPIAddressType *addrInfo);
1998-06-22 21:19:46 +00:00
LONG ProcessMAPI_NSCP_SynchronizeClient(MAPI_NSCP_SynchronizeClientType *syncInfo);
1998-03-28 02:44:41 +00:00
//
// This will store the CFrameWnd we startup for MAPI and if we do start
// an instance of the browser, we will close it out when we leave.
//
static CFrameWnd *pMAPIFrameWnd = NULL;
void
StoreMAPIFrameWnd(CFrameWnd *pFrameWnd)
{
pMAPIFrameWnd = pFrameWnd;
}
// This is the result of a WM_COPYDATA message. This will be used to send requests
// into Communicator for Simple MAPI commands.
//
// The description of the parameters coming into this call are:
//
// wParam = (WPARAM) (HWND) hwnd; // handle of sending window
// lParam = (LPARAM) (PCOPYDATASTRUCT) pcds; // pointer to structure with data
// context= needed for the context we will use in Communicator
//
// typedef struct tagCOPYDATASTRUCT { // cds
// DWORD dwData; // the ID of the request
// DWORD cbData; // the size of the argument
// PVOID lpData; // Chunk of information defined specifically for each of the
// // Simple MAPI Calls.
// } COPYDATASTRUCT;
//
// Returns: The MAPI Return code for the operation:
//
//
LONG ProcessNetscapeMAPIHook(WPARAM wParam, LPARAM lParam)
{
PCOPYDATASTRUCT pcds = (PCOPYDATASTRUCT) lParam;
MAPIIPCType *ipcInfo;
#ifdef WIN32
HANDLE hSharedMemory;
#endif
if (lParam == NULL)
{
return(MAPI_E_FAILURE);
}
//
// Get shared memory info structure pointer...
//
ipcInfo = (MAPIIPCType *)pcds->lpData;
if (ipcInfo == NULL)
{
return(MAPI_E_FAILURE);
}
//
// Now connect to shared memory...or just set the
// pointer for Win16
//
#ifdef WIN32
CSharedMem *sMem = NSOpenExistingSharedMemory((LPCTSTR) ipcInfo->smemName, &hSharedMemory);
if (!sMem)
{
return(MAPI_E_FAILURE);
}
#else
if (!ipcInfo->lpsmem)
{
return(MAPI_E_FAILURE);
}
#endif
TRACE("MAPI: MAPIHook Message ID = %d\n", pcds->dwData);
switch (pcds->dwData)
{
//////////////////////////////////////////////////////////////////////
// MAPILogon
//////////////////////////////////////////////////////////////////////
case NSCP_MAPILogon:
{
MAPILogonType *logonInfo;
#ifdef WIN32
logonInfo = (MAPILogonType *) &(sMem->m_buf[0]);
#else
logonInfo = (MAPILogonType *) ipcInfo->lpsmem;
#endif
if (!logonInfo)
{
return(MAPI_E_FAILURE);
}
logonInfo->ipcWorked = 1; // Set the worked flag
return(ProcessMAPILogon(logonInfo));
break;
}
//////////////////////////////////////////////////////////////////////
// MAPILogoff
//////////////////////////////////////////////////////////////////////
case NSCP_MAPILogoff:
{
MAPILogoffType *logoffInfo;
#ifdef WIN32
logoffInfo = (MAPILogoffType *) &(sMem->m_buf[0]);
#else
logoffInfo = (MAPILogoffType *) ipcInfo->lpsmem;
#endif
if (!logoffInfo)
{
return(MAPI_E_FAILURE);
}
logoffInfo->ipcWorked = 1; // Set the worked flag
return(ProcessMAPILogoff(logoffInfo));
break;
}
//////////////////////////////////////////////////////////////////////
// NSCP_MAPISendMail
//////////////////////////////////////////////////////////////////////
case NSCP_MAPISendMail:
{
MAPISendMailType *sendMailPtr;
#ifdef WIN32
sendMailPtr = (MAPISendMailType *) &(sMem->m_buf[0]);
#else
sendMailPtr = (MAPISendMailType *) ipcInfo->lpsmem;
#endif
if (!sendMailPtr)
{
return(MAPI_E_FAILURE);
}
sendMailPtr->ipcWorked = 1; // Set the worked flag
return(ProcessMAPISendMail(sendMailPtr));
break;
}
//////////////////////////////////////////////////////////////////////
// MAPISendDocuments
//////////////////////////////////////////////////////////////////////
case NSCP_MAPISendDocuments:
{
MAPISendDocumentsType *sendDocPtr;
#ifdef WIN32
sendDocPtr = (MAPISendDocumentsType *) &(sMem->m_buf[0]);
#else
sendDocPtr = (MAPISendDocumentsType *) ipcInfo->lpsmem;
#endif
if (!sendDocPtr)
{
return(MAPI_E_FAILURE);
}
sendDocPtr->ipcWorked = 1; // Set the worked flag
return(ProcessMAPISendDocuments(sendDocPtr));
break;
}
//////////////////////////////////////////////////////////////////////
// MAPIFindNext
//////////////////////////////////////////////////////////////////////
case NSCP_MAPIFindNext:
{
MAPIFindNextType *findInfo;
#ifdef WIN32
findInfo = (MAPIFindNextType *) &(sMem->m_buf[0]);
#else
findInfo = (MAPIFindNextType *) ipcInfo->lpsmem;
#endif
if (!findInfo)
{
return(MAPI_E_FAILURE);
}
findInfo->ipcWorked = 1; // Set the worked flag
return(ProcessMAPIFindNext(findInfo));
break;
}
//////////////////////////////////////////////////////////////////////
// MAPIDeleteMail
//////////////////////////////////////////////////////////////////////
case NSCP_MAPIDeleteMail:
{
MAPIDeleteMailType *delInfo;
#ifdef WIN32
delInfo = (MAPIDeleteMailType *) &(sMem->m_buf[0]);
#else
delInfo = (MAPIDeleteMailType *) ipcInfo->lpsmem;
#endif
if (!delInfo)
{
return(MAPI_E_FAILURE);
}
delInfo->ipcWorked = 1; // Set the worked flag
return(ProcessMAPIDeleteMail(delInfo));
break;
}
//////////////////////////////////////////////////////////////////////
// MAPIResolveName
//////////////////////////////////////////////////////////////////////
case NSCP_MAPIResolveName:
{
MAPIResolveNameType *nameInfo;
#ifdef WIN32
nameInfo = (MAPIResolveNameType *) &(sMem->m_buf[0]);
#else
nameInfo = (MAPIResolveNameType *) ipcInfo->lpsmem;
#endif
if (!nameInfo)
{
return(MAPI_E_FAILURE);
}
nameInfo->ipcWorked = 1; // Set the worked flag
return(ProcessMAPIResolveName(nameInfo));
break;
}
//////////////////////////////////////////////////////////////////////
// MAPIDetails
//////////////////////////////////////////////////////////////////////
case NSCP_MAPIDetails:
{
MAPIDetailsType *detailInfo;
#ifdef WIN32
detailInfo = (MAPIDetailsType *) &(sMem->m_buf[0]);
#else
detailInfo = (MAPIDetailsType *) ipcInfo->lpsmem;
#endif
if (!detailInfo)
{
return(MAPI_E_FAILURE);
}
detailInfo->ipcWorked = 1; // Set the worked flag
return(ProcessMAPIDetails(detailInfo));
break;
}
//////////////////////////////////////////////////////////////////////
// MAPIReadMail
//////////////////////////////////////////////////////////////////////
case NSCP_MAPIReadMail:
{
MAPIReadMailType *readInfo;
#ifdef WIN32
readInfo = (MAPIReadMailType *) &(sMem->m_buf[0]);
#else
readInfo = (MAPIReadMailType *) ipcInfo->lpsmem;
#endif
if (!readInfo)
{
return(MAPI_E_FAILURE);
}
readInfo->ipcWorked = 1; // Set the worked flag
return(ProcessMAPIReadMail(readInfo));
break;
}
//////////////////////////////////////////////////////////////////////
// NSCP_MAPISaveMail
//////////////////////////////////////////////////////////////////////
case NSCP_MAPISaveMail:
{
MAPISendMailType *sendMailPtr;
#ifdef WIN32
sendMailPtr = (MAPISendMailType *) &(sMem->m_buf[0]);
#else
sendMailPtr = (MAPISendMailType *) ipcInfo->lpsmem;
#endif
if (!sendMailPtr)
{
return(MAPI_E_FAILURE);
}
sendMailPtr->ipcWorked = 1; // Set the worked flag
return(ProcessMAPISaveMail(sendMailPtr));
break;
}
//////////////////////////////////////////////////////////////////////
// MAPIAddress
//////////////////////////////////////////////////////////////////////
case NSCP_MAPIAddress:
{
MAPIAddressType *addrInfo;
#ifdef WIN32
addrInfo = (MAPIAddressType *) &(sMem->m_buf[0]);
#else
addrInfo = (MAPIAddressType *) ipcInfo->lpsmem;
#endif
if (!addrInfo)
{
return(MAPI_E_FAILURE);
}
addrInfo->ipcWorked = 1; // Set the worked flag
return(ProcessMAPIAddress(addrInfo));
}
1998-06-22 21:19:46 +00:00
//////////////////////////////////////////////////////////////////////
// MAPI_NSCP_SynchronizeClient
//////////////////////////////////////////////////////////////////////
case NSCP_MAPI_NSCP_SynchronizeClient:
{
MAPI_NSCP_SynchronizeClientType *syncInfo;
#ifdef WIN32
syncInfo = (MAPI_NSCP_SynchronizeClientType *) &(sMem->m_buf[0]);
#else
syncInfo = (MAPI_NSCP_SynchronizeClientType *) ipcInfo->lpsmem;
#endif
if (!syncInfo)
{
return(MAPI_E_FAILURE);
}
syncInfo->ipcWorked = 1; // Set the worked flag
return(ProcessMAPI_NSCP_SynchronizeClient(syncInfo));
}
1998-03-28 02:44:41 +00:00
case NSCP_MAPIFree: // This should never hit Communicator, but if it does
#ifdef WIN16
return(SUCCESS_SUCCESS); // Just return
#else
return(S_OK); // Just return
#endif
default:
return(MAPI_E_NOT_SUPPORTED); // Should never hit here!
break;
}
return(SUCCESS_SUCCESS);
}
//
// Find the default session for Communicator...
//
CMAPIConnection
*GetDefaultSession(void)
{
int i;
for (i=0; i < MAX_CON; i++)
{
if (mapiConnections[i] != NULL)
{
if (mapiConnections[i]->IsDefault())
{
return mapiConnections[i];
}
}
}
return(NULL);
}
//
// Find an open session slot...
//
LONG
GetOpenSessionSlot( void )
{
int i;
for (i=0; i < MAX_CON; i++)
{
if (mapiConnections[i] == NULL)
{
return(i);
}
}
return(-1);
}
//
// Returns TRUE if it was reassigned and FALSE if not.
//
BOOL
TryDefaultReassignment(void)
{
int i;
int loc = -1;
// Find any sessions left?
for (i=0; i < MAX_CON; i++)
{
if (mapiConnections[i] != NULL)
{
loc = i;
break;
}
}
// Set default state on the object to true
if (loc >= 0)
{
mapiConnections[loc]->SetDefault(TRUE);
return(TRUE);
}
else
{
return(FALSE);
}
}
LONG
ProcessMAPILogon(MAPILogonType *logonInfo)
{
CMAPIConnection *defSession = GetDefaultSession();
NSstringSeq strSeq = (LPSTR) logonInfo + sizeof(MAPILogonType);
LPSTR lpszProfileName = NSStrSeqGet(strSeq, 0);
LPSTR lpszPassword = NSStrSeqGet(strSeq, 1);
TRACE("MAPI: ProcessMAPILogon() ProfileName = [%s] Password = [%s]\n",
lpszProfileName, lpszPassword);
//
// This is a query if lpszProfileName is NULL, lpszPassword is NULL and
// the MAPI_LOGON_UI is not set
//
if ((lpszProfileName[0] == '\0') && (lpszPassword[0] == '\0') &&
(!(logonInfo->flFlags & MAPI_LOGON_UI)) )
{
if (defSession == NULL)
{
return(MAPI_E_FAILURE);
}
else
{
defSession->IncrementSessionCount();
logonInfo->lhSession = defSession->GetID();
return(SUCCESS_SUCCESS);
}
}
//
// Only allow for sessions by a single profile name...
//
if ( ( defSession != NULL ) &&
(
(lstrcmp(lpszProfileName, defSession->GetProfileName() ) != 0) ||
(lstrcmp(lpszPassword, defSession->GetPassword() ) != 0)
)
)
{
return(MAPI_E_TOO_MANY_SESSIONS);
}
//
// Now create the new MAPI session if we have to...
//
BOOL createNew = FALSE;
if (
( defSession == NULL ) ||
// Indicates an attempt should be made to create a new session rather than acquire
// the environment's shared session. If the MAPI_NEW_SESSION flag is not set, MAPILogon
// uses an existing shared session.
(logonInfo->flFlags & MAPI_NEW_SESSION) ||
(defSession == NULL) // No default session exists!
)
{
createNew = TRUE;
}
//
// Make sure only 4 max are allowed...
//
LONG slot;
if ((createNew) && ((slot = GetOpenSessionSlot()) == -1))
{
return(MAPI_E_TOO_MANY_SESSIONS);
}
//
// If we don't have to create a new session, just return the ID and
// move on with life
//
if (!createNew)
{
if (defSession == NULL)
{
return(MAPI_E_FAILURE);
}
defSession->IncrementSessionCount();
logonInfo->lhSession = defSession->GetID();
return(SUCCESS_SUCCESS);
}
//
// Finally, create a new session!
//
mapiConnections[slot] = new CMAPIConnection(slot, lpszProfileName, lpszPassword);
if (defSession == NULL)
{
mapiConnections[slot]->SetDefault(TRUE);
}
logonInfo->lhSession = mapiConnections[slot]->GetID();
//
// Process Flags...
//
// Indicates an attempt should be made to download all of the user's messages before
// returning. If the MAPI_FORCE_DOWNLOAD flag is not set, messages can be downloaded
// in the background after the function call returns.
if (logonInfo->flFlags & MAPI_FORCE_DOWNLOAD)
{
MAPIGetNewMessagesInBackground();
}
// Indicates that a logon dialog box should be displayed to prompt the user for
// logon information. If the user needs to provide a password and profile name
// to enable a successful logon, MAPI_LOGON_UI must be set.
if (logonInfo->flFlags & MAPI_LOGON_UI)
{
TRACE("MAPI: ProcessMAPILogon() MAPI_LOGON_UI Unsupported.\n");
}
#ifdef WIN32
// Indicates that MAPILogon should only prompt for a password and not allow the user
// to change the profile name. Either MAPI_PASSWORD_UI or MAPI_LOGON_UI should not be
// set, since the intent is to select between two different dialog boxes for logon.
if (logonInfo->flFlags & MAPI_PASSWORD_UI)
{
TRACE("MAPI: ProcessMAPILogon() MAPI_PASSWORD_UI Unsupported.\n");
}
#endif
return(SUCCESS_SUCCESS);
}
LONG
ProcessMAPILogoff(MAPILogoffType *logoffInfo)
{
TRACE("MAPI: ProcessMAPILogoff() Session ID = [%d]\n", logoffInfo->lhSession);
//
// Verify the session handle...
//
if (( (logoffInfo->lhSession-1) >= MAX_CON) || ( (logoffInfo->lhSession-1) < 0))
{
return(MAPI_E_INVALID_SESSION);
}
CMAPIConnection *logoffSession = mapiConnections[(logoffInfo->lhSession - 1)];
if (logoffSession == NULL)
{
return(MAPI_E_INVALID_SESSION);
}
//
// Decrement the session count, then if this is the last one
// connected to this session, then kill it...
//
logoffSession->DecrementSessionCount();
if (logoffSession->GetSessionCount() <= 0)
{
//
// If this was the default session "holder", then we need to
// assign that task to a new one if it exists, if not, then
// it is all back to null.
//
BOOL needToReassign = logoffSession->IsDefault();
delete logoffSession;
mapiConnections[logoffInfo->lhSession - 1] = NULL;
if (needToReassign)
{
TRACE("MAPI: ProcessMAPILogoff() Need to reassign default\n");
if (!TryDefaultReassignment())
{
if (pMAPIFrameWnd != NULL)
{
pMAPIFrameWnd->PostMessage(WM_CLOSE);
pMAPIFrameWnd = NULL;
}
}
}
}
return(SUCCESS_SUCCESS);
}
//
// Actually process the send mail operation...
//
LONG
ProcessMAPISendMail(MAPISendMailType *sendMailPtr)
{
CMAPIConnection *mySession;
NSstringSeq mailInfoSeq;
TRACE("MAPI: ProcessMAPISendMail() Session ID = [%d]\n", sendMailPtr->lhSession);
//
// Verify the session handle...
//
if (((sendMailPtr->lhSession-1) >= MAX_CON) || ((sendMailPtr->lhSession-1) < 0))
{
return(MAPI_E_FAILURE);
}
mySession = mapiConnections[(sendMailPtr->lhSession - 1)];
if (mySession == NULL)
{
return(MAPI_E_FAILURE);
}
//
// Before we start, make sure things make sense...
//
if ( (!(sendMailPtr->flFlags & MAPI_DIALOG)) && (sendMailPtr->MSG_nRecipCount == 0) )
{
return(MAPI_E_UNKNOWN_RECIPIENT);
}
mailInfoSeq = (NSstringSeq) &(sendMailPtr->dataBuf[0]);
TRACE("MAPI: ProcessMAPISendMail() Session ID = [%d]\n", sendMailPtr->lhSession);
//
// Now set the show window flag...
//
BOOL showWindow = (( sendMailPtr->flFlags & MAPI_DIALOG ) != 0);
LONG rc = DoFullMAPIMailOperation(sendMailPtr,
NSStrSeqGet(mailInfoSeq, 1),
showWindow);
return(rc);
}
//
// Actually process the send mail operation...
//
LONG
ProcessMAPISaveMail(MAPISendMailType *sendMailPtr)
{
CMAPIConnection *mySession;
NSstringSeq mailInfoSeq;
TRACE("MAPI: ProcessMAPISaveMail() Session ID = [%d]\n", sendMailPtr->lhSession);
//
// Verify the session handle...
//
if (((sendMailPtr->lhSession-1) >= MAX_CON) || ((sendMailPtr->lhSession-1) < 0))
{
return(MAPI_E_FAILURE);
}
mySession = mapiConnections[(sendMailPtr->lhSession - 1)];
if (mySession == NULL)
{
return(MAPI_E_FAILURE);
}
mailInfoSeq = (NSstringSeq) &(sendMailPtr->dataBuf[0]);
TRACE("MAPI: ProcessMAPISaveMail() Session ID = [%d]\n", sendMailPtr->lhSession);
//
// Now process the save mail operation...
//
LONG rc = DoMAPISaveMailOperation(sendMailPtr,
NSStrSeqGet(mailInfoSeq, 1));
return(rc);
}
//
// Actually process the send documents operation...
//
LONG
ProcessMAPISendDocuments(MAPISendDocumentsType *sendDocPtr)
{
LONG rc = DoPartialMAPIMailOperation(sendDocPtr);
return(rc);
}
//
// This is an ENUM procedure for messages that are in the system
//
LONG
ProcessMAPIFindNext(MAPIFindNextType *findInfo)
{
CMAPIConnection *mySession;
//
// Verify the session handle...
//
if (((findInfo->lhSession-1) >= MAX_CON) || ((findInfo->lhSession-1) < 0))
{
return(MAPI_E_INVALID_SESSION);
}
mySession = mapiConnections[(findInfo->lhSession - 1)];
if (mySession == NULL)
{
return(MAPI_E_INVALID_SESSION);
}
//
// If this is true, then this is the first call to this FindNext function
// and we should start the enumeration operation.
//
MSG_FolderInfo *inboxFolder = NULL;
int32 folderRC = MSG_GetFoldersWithFlag(WFE_MSGGetMaster(),
MSG_FOLDER_FLAG_INBOX, &inboxFolder, 1);
if (folderRC <= 0)
{
return(MAPI_E_NO_MESSAGES);
}
// This is the first message
if (mySession->GetMessageIndex() < 0)
{
MSG_MapiListContext *cookie;
MessageKey keyFound = MSG_GetFirstKeyInFolder(inboxFolder, &cookie);
if (keyFound == MSG_MESSAGEKEYNONE)
{
mySession->SetMapiListContext(NULL);
mySession->SetMessageIndex(-1); // Reset to -1...
return(MAPI_E_NO_MESSAGES);
}
TRACE("MAPI: ProcessMAPIFindNext() Found message id = %d\n", keyFound);
wsprintf((LPSTR) findInfo->lpszMessageID, "%d", keyFound);
mySession->SetMapiListContext(cookie);
mySession->SetMessageIndex(keyFound); // Just set to 1 and then increment from there...
}
else
{
MSG_MapiListContext *cookie = (MSG_MapiListContext *)mySession->GetMapiListContext();
// Sanity check the cookie value...
if (cookie == NULL)
{
mySession->SetMapiListContext(NULL);
mySession->SetMessageIndex(-1); // Reset to -1...
return(MAPI_E_NO_MESSAGES);
}
MessageKey nextKey = MSG_GetNextKeyInFolder(cookie);
if (nextKey == MSG_MESSAGEKEYNONE)
{
mySession->SetMapiListContext(NULL);
mySession->SetMessageIndex(-1); // Reset to -1...
return(MAPI_E_NO_MESSAGES);
}
TRACE("MAPI: ProcessMAPIFindNext() Found message id = %d\n", nextKey);
wsprintf((LPSTR) findInfo->lpszMessageID, "%d", nextKey);
mySession->SetMessageIndex(nextKey); // Set the key to the found one and move on...
}
return(SUCCESS_SUCCESS);
}
//
// Actually process the delete mail operation!
//
LONG
ProcessMAPIDeleteMail(MAPIDeleteMailType *delInfo)
{
CMAPIConnection *mySession;
//
// Verify the session handle...
//
if (((delInfo->lhSession-1) >= MAX_CON) || ((delInfo->lhSession-1) < 0))
{
return(MAPI_E_INVALID_SESSION);
}
mySession = mapiConnections[(delInfo->lhSession - 1)];
if (mySession == NULL)
{
return(MAPI_E_INVALID_SESSION);
}
BOOL msgValid = TRUE;
TRACE("MAPI: RICHIE TODO: ProcessMAPIDeleteMail() TRY TO FIND THE MESSAGE FROM THE IDENTIFIER:\n");
TRACE("MAPI: RICHIE TODO: ProcessMAPIDeleteMail() [%s]\n", delInfo->lpszMessageID);
if (msgValid)
{
TRACE("MAPI: RICHIE TODO: ProcessMAPIDeleteMail() DELETE THE MESSAGE!!!\n");
return(SUCCESS_SUCCESS);
}
else
{
return(MAPI_E_INVALID_MESSAGE);
}
}
//
// Process the name resolution for the address passed in.
//
LONG
ProcessMAPIResolveName(MAPIResolveNameType *nameInfo)
{
CMAPIConnection *mySession;
//
// Verify the session handle...
//
if (((nameInfo->lhSession-1) >= MAX_CON) || ((nameInfo->lhSession-1) < 0))
{
return(MAPI_E_INVALID_SESSION);
}
mySession = mapiConnections[(nameInfo->lhSession - 1)];
if (mySession == NULL)
{
return(MAPI_E_INVALID_SESSION);
}
TRACE("MAPI: ProcessMAPIResolveName() TRY TO IDENTIFY THE ADDRESS INFO FOR THE NAME:\n");
TRACE("MAPI: ProcessMAPIResolveName() [%s]\n", nameInfo->lpszName);
DWORD numFound;
LPSTR retFullName = NULL;
LPSTR retAddr = NULL;
AB_ContainerInfo *ctr;
ABID id;
numFound = AB_MAPI_ResolveName (
(char *)nameInfo->lpszName, // i.e. a nickname or part of the person's name to look up. Assumes First Last
&ctr, // caller allocates the ctr ptr. BE fills Caller must close container when done with it
&id); // caller allocates the ABID, BE fills
if (numFound > 1)
{
return(MAPI_E_AMBIGUOUS_RECIPIENT);
}
else if (numFound <= 0)
{
return(MAPI_E_UNKNOWN_RECIPIENT);
}
else // Here we found a single entry!
{
// Get the full name and email address...
retFullName = AB_MAPI_GetFullName(ctr, id);
retAddr = AB_MAPI_GetEmailAddress(ctr, id);
// null out return values just in case...
nameInfo->lpszABookName[0] = '\0';
nameInfo->lpszABookAddress[0] = '\0';
// if valid, copy the strings over...
if (retFullName)
lstrcpy((LPSTR) nameInfo->lpszABookName, retFullName);
if (retAddr)
lstrcpy((LPSTR) nameInfo->lpszABookAddress, retAddr);
// Now get the string to use for an ID later on...
LPSTR abookIDString = AB_MAPI_ConvertToDescription(ctr);
// build that string ID to pass back through the MAPI API
wsprintf((LPSTR) nameInfo->lpszABookID, "%d%s", id, DELIMIT);
lstrcat((LPSTR) nameInfo->lpszABookID, abookIDString);
// Be nice and cleanup after ourselves...
if (retAddr)
XP_FREE(retAddr);
if (retFullName)
XP_FREE(retFullName);
if (abookIDString)
XP_FREE(abookIDString);
return(SUCCESS_SUCCESS);
}
}
//
// This deals with the MAPIDetails call
//
LONG
ProcessMAPIDetails(MAPIDetailsType *detailInfo)
{
CMAPIConnection *mySession;
//
// Verify the session handle...
//
if (((detailInfo->lhSession-1) >= MAX_CON) || ((detailInfo->lhSession-1) < 0))
{
return(MAPI_E_INVALID_SESSION);
}
mySession = mapiConnections[(detailInfo->lhSession - 1)];
if (mySession == NULL)
{
return(MAPI_E_INVALID_SESSION);
}
TRACE("MAPI: ProcessMAPIDetails() NEED TO LOCATE THE ENTRY FOR:\n");
TRACE("MAPI: ProcessMAPIDetails() [%s]\n", detailInfo->lpszABookID);
char workString[MAX_NAME_LEN];
char *idString;
char *containerString;
lstrcpy((LPSTR) workString, (LPSTR) detailInfo->lpszABookID);
//
// Now parse out the first and last names of the person...
//
int totLen = lstrlen((LPSTR) workString);
int loc = 0;
idString = &(workString[0]);
while ( ( lstrlen((LPSTR) DELIMIT) + loc) < totLen)
{
if (strncmp((LPSTR)(workString + loc), DELIMIT, lstrlen(DELIMIT)) == 0)
{
workString[loc] = '\0';
containerString = &(workString[loc + lstrlen(DELIMIT)]);
break;
}
++loc;
}
if ( (lstrlen((LPSTR) DELIMIT) + loc) >= totLen )
{
return(MAPI_E_INVALID_RECIPS);
}
// Now, convert the stuff to real values for the API...
1998-06-22 21:19:46 +00:00
extern MWContext *GetUsableContext(void);
1998-03-28 02:44:41 +00:00
ABID id = atoi((const char *) idString);
MSG_Pane *personPane = NULL;
1998-06-22 21:19:46 +00:00
AB_ContainerInfo *container = AB_MAPI_ConvertToContainer(GetUsableContext(), containerString);
1998-03-28 02:44:41 +00:00
// Need to first create a person entry pane and then call
// FE_ShowPropertySheetAB2 on that pane - return 0 is problem
int rc = AB_MAPI_CreatePropertySheetPane(
GetUsableContext(),
WFE_MSGGetMaster(),
container,
id,
&personPane); // BE will allocate a personPane and return a ptr to it here
if (!rc)
{
return(MAPI_E_INVALID_RECIPS);
}
// Now display the address book entry for this user. If the parameter
// detailInfo->ulUIParam is NULL, just doit and return, but if it is
// not NULL, then we should do it as application modal.
// RICHIE - THIS IS NOT IN THE BUILD YET! MUST WAIT
//(void) FE_ShowPropertySheetForAB2(personPane, AB_Person);
// cleanup the container and person pane...
AB_MAPI_CloseContainer(&container);
AB_ClosePane(personPane);
return(SUCCESS_SUCCESS);
}
//
// CMAPIConnections object...should be in their own file...
//
CMAPIConnection::CMAPIConnection ( LONG id, LPSTR name, LPSTR pw)
{
m_sessionCount = 1;
m_defaultConnection = FALSE;
m_ID = (id + 1); // since zero is invalid, but have to make sure we
// decrement by one when it is passed in again.
m_messageIndex = -1; // For tracing our way through the FindNext operation
m_cookie = NULL; // For doing the enumeration of messages
m_messageFindInfo[0] = '\0';
lstrcpy((LPSTR) m_profileName, name);
lstrcpy((LPSTR) m_password, pw);
}
CMAPIConnection::~CMAPIConnection ( )
{
}
//
// This is all needed to process a MAPIReadMail operation
//
static LPSTR
CheckNull(LPSTR inStr)
{
static UCHAR str[1];
str[0] = '\0';
if (inStr == NULL)
return((LPSTR)str);
else
return(inStr);
}
LONG
WriteTheMemoryBufferToDisk(LPSTR fName, UINT bufSize, LPSTR buf)
{
if (!buf)
{
return(-1);
}
HFILE hFile = _lcreat(fName, 0);
if (hFile == HFILE_ERROR)
{
return(-1);
}
UINT writeCount = _lwrite(hFile, buf, bufSize);
_lclose(hFile);
if (writeCount != bufSize)
{
_unlink(fName);
return(-1);
}
return(0);
}
static LPSTR
GetTheTempDirectoryOnTheSystem(void)
{
static UCHAR retPath[_MAX_PATH];
if (getenv("TEMP"))
{
lstrcpy((LPSTR) retPath, getenv("TEMP")); // environmental variable
}
else if (getenv("TMP"))
{
lstrcpy((LPSTR) retPath, getenv("TMP")); // How about this environmental variable?
}
else
{
GetWindowsDirectory((LPSTR) retPath, sizeof(retPath));
}
return((LPSTR) &(retPath[0]));
}
#ifdef WIN16
static int ISGetTempFileName(LPCSTR a_pDummyPath, LPCSTR a_pPrefix, UINT a_uUnique, LPSTR a_pResultName)
{
#ifdef GetTempFileName // we need the real thing comming up next...
#undef GetTempFileName
#endif
return GetTempFileName(0, a_pPrefix, a_uUnique, a_pResultName);
}
#endif
static DWORD
ValidateFile(LPCSTR szFile)
{
struct _stat buf;
int result;
result = _stat( szFile, &buf );
if (result != 0)
return(1);
if (!(buf.st_mode & S_IREAD))
return(2);
return(0);
}
static LONG
GetTempAttachmentName(LPSTR fName)
{
UINT res;
static UINT uUnique = 1;
if (!fName)
return(-1);
LPSTR szTempPath = GetTheTempDirectoryOnTheSystem();
TRYAGAIN:
#ifdef WIN32
res = GetTempFileName(szTempPath, "MAPI", uUnique++, fName);
#else
res = ISGetTempFileName(szTempPath, "MAPI", uUnique++, fName);
#endif
if (ValidateFile(fName) != 1)
{
if (uUnique < 32000)
{
goto TRYAGAIN;
}
else
{
return(-1);
}
}
return 0;
}
LONG
ProcessMAPIReadMail(MAPIReadMailType *readInfo)
{
CMAPIConnection *mySession;
lpMapiMessage message; // this is the message we will receive
//
// Verify the session handle...
//
if (((readInfo->lhSession-1) >= MAX_CON) || ((readInfo->lhSession-1) < 0))
{
return(MAPI_E_INVALID_SESSION);
}
mySession = mapiConnections[(readInfo->lhSession - 1)];
if (mySession == NULL)
{
return(MAPI_E_INVALID_SESSION);
}
// First, gotta get the inbox folder!
MSG_FolderInfo *inboxFolder = NULL;
int32 folderRC = MSG_GetFoldersWithFlag(WFE_MSGGetMaster(),
MSG_FOLDER_FLAG_INBOX, &inboxFolder, 1);
if (folderRC <= 0)
{
return(MAPI_E_INVALID_MESSAGE);
}
// Convert the message id to a number!
MessageKey lookupKey = atoi((const char *)readInfo->lpszMessageID);
TRACE("MAPI: ProcessMAPIReadMail() Find this message = [%s] - [%d]\n",
readInfo->lpszMessageID, lookupKey);
// Now see if we can find this message!
BOOL msgFound = MSG_GetMapiMessageById(inboxFolder, lookupKey, &message);
// If we didn't find the message, then we need to bail!
if (!msgFound)
{
TRACE("MAPI: ProcessMAPIReadMail() MESSAGE NOT FOUND\n");
return(MAPI_E_INVALID_MESSAGE);
}
//
// Now that we have found the message, we need to populate the chunk of
// memory that we will write to disk and then move on. For now, we need
// to setup all of the variables for the information we will need for the
// message.
//
ULONG i;
DWORD arrayCount = 0; // Counter for array entries!
DWORD arrayTotal = 0; // Total for array entries!
FLAGS msgFlags; // unread, return or receipt
ULONG msgRecipCount = message->nRecipCount; // Number of recipients
ULONG msgFileAttachCount = message->nFileCount; // # of file attachments
LPSTR msgSubject = message->lpszSubject; // Message Subject
LPSTR msgNoteText = NULL; // Message Text will be
LPSTR msgDateReceived = message->lpszDateReceived;// in YYYY/MM/DD HH:MM format
LPSTR msgThreadID = message->lpszConversationID; // conversation thread ID
//
// The following are for the originator of the message. Only ONE of these.
//
LPSTR origName = NULL; // Originator name
LPSTR origAddress = NULL; // Originator address (optional)
ULONG origRecipClass = MAPI_TO; // Recipient class - MAPI_TO, MAPI_CC, MAPI_BCC, MAPI_ORIG
// Now we have to make sure there is an originator and set the vars...
if (message->lpOriginator)
{
origName = message->lpOriginator->lpszName;
origAddress = message->lpOriginator->lpszAddress;
}
if ( ! (readInfo->flFlags & MAPI_ENVELOPE_ONLY))
{
TRACE("MAPI: ProcessMAPIReadMail() GET NOTE TEXT - ONLY IF WE HAVE TO!\n");
msgNoteText = message->lpszNoteText;
}
// First, figure out how many entries we need to have in a string array...
arrayTotal = 6 + 1; // 6 for the first 6 strings and 1 for the final NULL
// Add the recipient information
arrayTotal += (msgRecipCount * 3);
// Now check to see if we are going to pass back attachments:
//
// MAPI_ENVELOPE_ONLY
// Indicates MAPIReadMail should read the message header only. File attachments are
// not copied to temporary files, and neither temporary file names nor message text
// is written. Setting this flag enhances performance.
//
// MAPI_SUPPRESS_ATTACH
// Indicates MAPIReadMail should not copy file attachments but should write message
// text into the MapiMessage structure. MAPIReadMail ignores this flag if the
// calling application has set the MAPI_ENVELOPE_ONLY flag. Setting the
// MAPI_SUPPRESS_ATTACH flag enhances performance.
//
if ((readInfo->flFlags & MAPI_SUPPRESS_ATTACH) ||
(readInfo->flFlags & MAPI_ENVELOPE_ONLY) )
{
msgFileAttachCount = 0;
}
arrayTotal += (msgFileAttachCount * 2);
// now allocate the memory for the string array
LPSTR *strArray = (LPSTR *) malloc((size_t) (sizeof(LPSTR) * arrayTotal));
if (!strArray)
{
return(MAPI_E_INSUFFICIENT_MEMORY);
}
// Now assign the easy return values to the shared memory structure
readInfo->MSG_flFlags = msgFlags; // unread, return or receipt
readInfo->MSG_nRecipCount = msgRecipCount; // Number of recipients
readInfo->MSG_nFileCount = msgFileAttachCount; // # of file attachments
readInfo->MSG_ORIG_ulRecipClass = origRecipClass; // Recipient class - MAPI_TO, MAPI_CC, MAPI_BCC, MAPI_ORIG
// Now go through and fill out the array to create the string sequence
strArray[0] = CheckNull(msgSubject);
strArray[1] = CheckNull(msgNoteText);
strArray[2] = CheckNull(msgDateReceived);
strArray[3] = CheckNull(msgThreadID);
strArray[4] = CheckNull(origName);
strArray[5] = CheckNull(origAddress);
arrayCount = 6; // counter for the rest of the needed attachments
// Now add all of the recipients
for (i=0; i<msgRecipCount; i++)
{
UCHAR tempString[128];
ULONG messageClass = message->lpRecips[i].ulRecipClass; // Get the recipient class...
// Now get the following 3 items:
// String x: LPSTR lpszName; // Recipient N name
// String x: LPSTR lpszAddress; // Recipient N address (optional)
// String x: LPSTR lpszRecipClass // recipient class - sprintf of ULONG
strArray[arrayCount++] = CheckNull(message->lpRecips[i].lpszName);
strArray[arrayCount++] = CheckNull(message->lpRecips[i].lpszAddress);
// 0 MAPI_ORIG Indicates the original sender of the message.
// 1 MAPI_TO Indicates a primary message recipient.
// 2 MAPI_CC Indicates a recipient of a message copy.
// 3 MAPI_BCC Indicates a recipient of a blind copy.
wsprintf((LPSTR) tempString, "%d", messageClass);
strArray[arrayCount++] = CheckNull((LPSTR) tempString);
}
// Now, add all of the attachments to this blob
for (i=0; i<msgFileAttachCount; i++)
{
// String x: LPSTR lpszPathName // Fully qualified path of the attached file.
// // This path should include the disk drive letter and directory name.
// String x: LPSTR lpszFileName // The display name for the attached file
//
strArray[arrayCount++] = CheckNull(message->lpFiles[i].lpszPathName);
strArray[arrayCount++] = CheckNull(message->lpFiles[i].lpszFileName);
}
strArray[arrayCount] = NULL;
// Create the string sequence
NSstringSeq strSeq = NSStrSeqNew(strArray);
// Now just cleanup the array....
free(strArray);
if (!strSeq)
{
return(MAPI_E_INSUFFICIENT_MEMORY);
}
// Now get the name of the file to write the blob to!
if (GetTempAttachmentName((LPSTR)readInfo->lpszBlob) < 0)
{
NSStrSeqDelete(strSeq);
return(MAPI_E_ATTACHMENT_WRITE_FAILURE);
}
// Now write the blob to disk and move on...
if (WriteTheMemoryBufferToDisk((LPSTR) readInfo->lpszBlob,
(UINT) NSStrSeqSize(strSeq), strSeq) != 0)
{
NSStrSeqDelete(strSeq);
return(MAPI_E_ATTACHMENT_WRITE_FAILURE);
}
//
// MAPI_PEEK
// Indicates MAPIReadMail does not mark the message as read. Marking a message as
// read affects its appearance in the user interface and generates a read receipt.
// If the messaging system does not support this flag, MAPIReadMail always marks
// the message as read. If MAPIReadMail encounters an error, it leaves the
// message unread.
if (!(readInfo->flFlags & MAPI_PEEK))
{
MSG_MarkMapiMessageRead (inboxFolder, lookupKey, TRUE);
}
// Now we have to free the message and the chunk of memory...
MSG_FreeMapiMessage(message);
NSStrSeqDelete(strSeq);
return(SUCCESS_SUCCESS);
}
// necessary variables for
int arrayCount = 0; // Counter for array entries!
int addressCount = 0; // Counter for array entries!
LPSTR *addrArray;
LPSTR toString = "1";
LPSTR ccString = "2";
LPSTR bccString = "3";
BOOL
AddressCallback(int totalCount, int currentIndex,
int addrType, LPSTR addrString)
{
LPSTR messageClass;
TRACE("TOTAL COUNT = %d\n", totalCount);
TRACE("CURRENT COUNT = %d\n", currentIndex);
TRACE("CURRENT ADDR = %s\n", addrString);
// If this is the first entry, then we need to allocate the array...
if (currentIndex == 0)
{
addressCount = totalCount;
addrArray = (LPSTR *) malloc( (size_t)
sizeof(LPSTR) * ((addressCount * 3) + 1)
);
if (!addrArray)
{
addressCount = 0;
return FALSE;
}
}
// if the array was not allocated...
if (!addrArray)
{
addressCount = 0;
return FALSE;
}
// Deal with the address type...
if (addrType == MSG_CC_HEADER_MASK)
messageClass = ccString;
else if (addrType == MSG_BCC_HEADER_MASK)
messageClass = bccString;
else
messageClass = toString;
// Now get the following 3 items:
// String x: LPSTR lpszName; // Recipient N name
// String x: LPSTR lpszAddress; // Recipient N address (optional)
// String x: LPSTR lpszRecipClass // recipient class - sprintf of ULONG
char *ptr = strchr(addrString, '<');
if (ptr)
{
addrString[strlen(addrString) - 1] = '\0';
*(ptr-1) = '\0';
}
addrArray[arrayCount++] = CheckNull(addrString);
if (ptr)
{
ptr++;
}
else
{
ptr = (char *) addrString;
}
addrArray[arrayCount++] = CheckNull(ptr);
// 0 MAPI_ORIG Indicates the original sender of the message.
// 1 MAPI_TO Indicates a primary message recipient.
// 2 MAPI_CC Indicates a recipient of a message copy.
// 3 MAPI_BCC Indicates a recipient of a blindcopy.
addrArray[arrayCount++] = CheckNull(messageClass);
return(TRUE);
}
int getAddressCount = 0;
MAPIAddressType *getAddressPtr = NULL;
NSstringSeq addrSeq = NULL;
// rhp - for MAPI calls...
BOOL
GetNextAddress(LPSTR *name, LPSTR *address, int *addrType)
{
if ( getAddressCount >= (getAddressPtr->nRecips * 3) )
{
return FALSE;
}
ULONG aType = atoi(NSStrSeqGet(addrSeq, getAddressCount++));
// return which type of address this is?
if (aType == MAPI_CC)
*addrType = MSG_CC_HEADER_MASK;
else if (aType == MAPI_BCC)
*addrType = MSG_BCC_HEADER_MASK;
else
*addrType = MSG_TO_HEADER_MASK;
*name = (LPSTR) NSStrSeqGet(addrSeq, getAddressCount++);
*address = (LPSTR) NSStrSeqGet(addrSeq, getAddressCount++);
return TRUE;
}
LONG
ProcessMAPIAddress(MAPIAddressType *addrInfo)
{
CMAPIConnection *mySession;
TRACE("MAPI: ProcessMAPIAddress() Incomming Addrs = %d\nCaption = [%s]\n",
addrInfo->nRecips,
addrInfo->lpszCaption);
//
// Verify the session handle...
//
if (((addrInfo->lhSession-1) >= MAX_CON) || ((addrInfo->lhSession-1) < 0))
{
return(MAPI_E_INVALID_SESSION);
}
mySession = mapiConnections[(addrInfo->lhSession - 1)];
if (mySession == NULL)
{
return(MAPI_E_INVALID_SESSION);
}
//
// Put up the address dialog and do the right thing :-)
//
addrSeq = (NSstringSeq) &(addrInfo->dataBuf[0]);
getAddressCount = 0; // Make sure to reset the counter for address info...
getAddressPtr = addrInfo; // Address pointer for callback...
arrayCount = 0; // counter for the rest of the entries...
theApp.m_pHiddenFrame->AddressDialog((LPSTR) (addrInfo->lpszCaption),
AddressCallback, GetNextAddress);
// If the address count is zero, then we can return early...
addrInfo->nNewRecips = addressCount;
if (addressCount == 0)
{
return(SUCCESS_SUCCESS);
}
addrArray[arrayCount] = NULL;
// Create the string sequence
NSstringSeq strSeq = NSStrSeqNew(addrArray);
// Now just cleanup the array....
free(addrArray);
if (!strSeq)
{
return(MAPI_E_INSUFFICIENT_MEMORY);
}
// Now get the name of the file to write the blob to!
if (GetTempAttachmentName((LPSTR)addrInfo->lpszBlob) < 0)
{
NSStrSeqDelete(strSeq);
return(MAPI_E_INSUFFICIENT_MEMORY);
}
// Now write the blob to disk and move on...
if (WriteTheMemoryBufferToDisk((LPSTR) addrInfo->lpszBlob,
(UINT) NSStrSeqSize(strSeq), strSeq) != 0)
{
NSStrSeqDelete(strSeq);
return(MAPI_E_INSUFFICIENT_MEMORY);
}
NSStrSeqDelete(strSeq);
return(SUCCESS_SUCCESS);
}
1998-06-22 21:19:46 +00:00
//
// This is for synchronizing the client from an external application via
// the MAPI interface.
//
LONG
ProcessMAPI_NSCP_SynchronizeClient(MAPI_NSCP_SynchronizeClientType *syncInfo)
{
extern void WFE_MAPISynchronize(CWnd *pParent);
MSG msg;
WFE_MAPISynchronize(NULL);
while (theApp.m_bSynchronizing)
{
// get the next message if any...
if (PeekMessage(&msg, NULL, 0, 0, PM_NOREMOVE))
{
(void) theApp.NSPumpMessage();
}
}
return SUCCESS_SUCCESS;
}