gecko-dev/lib/libi18n/euc2sjis.c

194 lines
6.5 KiB
C
Raw Normal View History

1998-03-28 02:44:41 +00:00
/* -*- Mode: C; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
/* euc2sjis.c */
#include "intlpriv.h"
extern int MK_OUT_OF_MEMORY;
/* net_euc2sjis(obj, eucbuf, eucbufsz)
* Args:
* eucbuf: Ptr to a buf of EUC chars
* eucbufsz: Size in bytes of eucbuf
* uncvtbuf: If entire buffer was converted, uncvtbuf[0] will be nul,
* else this points to EUC chars that were NOT converted
* and mz_euc2sjis() with additional EUC chars appended.
* Return:
* Returns NULL on failure, otherwise it returns a pointer to a buffer of
* converted characters. Caller must XP_FREE() this memory.
*
* Description:
*
* Allocate destination buffer.
*
* All bytes < SS2 (0x8E) are either ASCII/Roman or invalid. Treat them
* as ASCII/Roman and just copy them unchanged.
*
* If SS2, then the next byte should be a Half-width Katakana, just copy
* it unchanged after disposing of the SS2 byte.
*
* If SS3, then the next 2 bytes should be JIS x212. If the bytes
* are not in the valide range for JIS x212, then copy the SS3 and
* continue. Leave the 2 byte to be processed from the beginning.
*
* If the next byte < 0xA0, this is not valid EUC, so treat it as
* ASCII/Roman and just copy it unchanged.
*
* If the next 2 bytes are both >= 0xA0, then this is a valid 2-byte
* x208, so convert them to SJIS. Otherwise, copy the 1st byte and
* continue.
*/
MODULE_PRIVATE unsigned char *
mz_euc2sjis( CCCDataObject obj,
const unsigned char *eucbuf, /* EUC buffer for conversion */
int32 eucbufsz) /* EUC buffer size in bytes */
{
char unsigned *tobuf = NULL;
int32 tobufsz;
register unsigned char *tobufp, *eucp; /* current byte in bufs */
register unsigned char *tobufep, *eucep; /* end of buffers */
int32 uncvtlen;
unsigned char *uncvtbuf = INTL_GetCCCUncvtbuf(obj);
/* Allocate a dest buffer: */
/* Usually EUC will be the same length as SJIS. SJIS will be shorter
* if Half-width Kana are used, but in the worst case, the converted
* SJIS will be the same size as the orignal EUC + 1 for nul byte.
*/
uncvtlen = strlen((char *)uncvtbuf);
tobufsz = eucbufsz + uncvtlen + 1;
if ((tobuf = (unsigned char *)XP_ALLOC(tobufsz)) == (unsigned char *)NULL) {
INTL_SetCCCRetval(obj, MK_OUT_OF_MEMORY);
return(NULL);
}
/* Initialize pointers, etc. */
eucp = (unsigned char *)eucbuf;
eucep = eucp + eucbufsz - 1;
#define uncvtp tobufp /* use tobufp as temp */
/* If prev. unconverted chars, append unconverted
* chars w/new chars and try to process.
*/
if (uncvtbuf[0] != '\0') {
uncvtp = uncvtbuf + uncvtlen;
while (uncvtp < (uncvtbuf + UNCVTBUF_SIZE) &&
eucp <= eucep)
*uncvtp++ = *eucp++;
*uncvtp = '\0'; /* nul terminate */
eucp = uncvtbuf; /* process unconverted first */
eucep = uncvtp - 1;
}
#undef uncvtp
tobufp = tobuf;
tobufep = tobufp + tobufsz - 2; /* save space for terminating null */
WHILELOOP:
/* While EUC data && space in dest. buf. */
while ((tobufp <= tobufep) && (eucp <= eucep)) {
if (*eucp < SS2) { /* ASCII/JIS-Roman/invalid EUC */
*tobufp++ = *eucp++;
} else if (*eucp == SS2) { /* Half-width katakana */
if (eucp+1 > eucep) /* No 2nd byte in EUC buffer? */
break;
eucp++; /* Dispose of SS2 */
*tobufp++ = *eucp++;
} else if (*eucp == SS3) { /* JIS X 0212-1990 */
if (eucp+2 > eucep) /* No 2nd & 3rd bytes in EUC buffer? */
break;
if (*eucp < 0xA0 || *(eucp+1) < 0xA0) { /* Invalid EUC212 */
*tobufp++ = *eucp++; /* process SS3 only */
} else {
*tobufp++ = *eucp++; /* SS3 */
*tobufp++ = *eucp++; /* 1st 212 byte unconverted */
*tobufp++ = *eucp++; /* 2nd 212 byte unconverted */
}
} else if (*eucp < 0xA0) { /* Invalid EUC: treat as Roman */
*tobufp++ = *eucp++;
} else { /* JIS X 0208 */
if (eucp+1 > eucep) /* No 2nd byte in EUC buffer? */
break;
if (*(eucp+1) < 0xA0) { /* 1st byte OK, check if 2nd is valid */
*tobufp++ = *eucp++; /* process 1 byte as Roman */
} else { /* Convert EUC-208 to SJIS: Same as */
/* jis2other.c's JIS208-to-SJIS algorithm */
/* except JIS 8th bit is set. */
unsigned char b;
b = ((*eucp) & 0x7F); /* Convert 1st EUC byte to JIS */
if (b < 0x5F) /* Convert it to SJIS byte */
*tobufp++ = ((b + 1) >> 1) + 0x70;
else
*tobufp++ = ((b + 1) >> 1) + 0xB0;
/* Convert 2nd SJIS byte */
if ((*eucp++) & 1) { /* if 1st JIS byte is odd */
b = ((*eucp) & 0x7F); /* convert 2nd EUC byte to JIS */
if (b > 0x5F)
*tobufp = b + 0x20;
else
*tobufp = b + 0x1F;
} else {
*tobufp = (*eucp & 0x7F) + 0x7E;
}
tobufp++;
eucp++;
}
}
}
if (uncvtbuf[0] != '\0') {
/* Just processed unconverted chars:
* eucp pts to 1st unprocessed char in
* eucbuf. Some may have been processed
* while processing unconverted chars,
* so set up ptrs not to process them
* twice.
*/
/* If nothing was converted, this can
* only happen if there was not
* enough EUC data. Stop and get
* more data.
*/
if (eucp == uncvtbuf) { /* Nothing converted */
*tobufp = '\0';
return(NULL);
}
eucp = (unsigned char *)eucbuf + (eucp - uncvtbuf - uncvtlen);
eucep = (unsigned char *)eucbuf + eucbufsz - 1; /* save space for nul */
uncvtbuf[0] = '\0'; /* No more uncoverted chars. */
goto WHILELOOP; /* Process new data */
}
*tobufp = '\0'; /* null terminate dest. data */
INTL_SetCCCLen(obj, tobufp - tobuf); /* length not counting null */
if (eucp <= eucep) { /* uncoverted EUC? */
tobufp = uncvtbuf; /* reuse the tobufp as a TEMP */
while (eucp <= eucep)
*tobufp++ = *eucp++;
*tobufp = '\0'; /* null terminate */
}
return(tobuf);
}