gecko-dev/view/public/nsIViewManager.h

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is mozilla.org code.
 *
 * The Initial Developer of the Original Code is
 * Netscape Communications Corporation.
 * Portions created by the Initial Developer are Copyright (C) 1998
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either of the GNU General Public License Version 2 or later (the "GPL"),
 * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */

#ifndef nsIViewManager_h___
#define nsIViewManager_h___

#include "nscore.h"
#include "nsIView.h"
#include "nsColor.h"
#include "nsEvent.h"

class nsIScrollableView;
class nsIWidget;
class nsICompositeListener;
struct nsRect;
class nsRegion;
class nsIDeviceContext;
class nsIViewObserver;
class nsView;

enum nsRectVisibility { 
  nsRectVisibility_kVisible, 
  nsRectVisibility_kAboveViewport, 
  nsRectVisibility_kBelowViewport, 
  nsRectVisibility_kLeftOfViewport, 
  nsRectVisibility_kRightOfViewport, 
  nsRectVisibility_kZeroAreaRect
}; 


#define NS_IVIEWMANAGER_IID   \
{ 0x3a8863d0, 0xa7f3, 0x11d1, \
  { 0xa8, 0x24, 0x00, 0x40, 0x95, 0x9a, 0x28, 0xc9 } }

class nsIViewManager : public nsISupports
{
public:

  NS_DEFINE_STATIC_IID_ACCESSOR(NS_IVIEWMANAGER_IID)

  /**
   * Initialize the ViewManager
   * Note: this instance does not hold a reference to the viewobserver
   * because it holds a reference to this instance.
   * This constructs the root view with the given parent.
   */
  virtual nsresult Init(nsIDeviceContext* aContext, nsIView *aParent) = 0;

  /**
   * Get the root of the view tree.
   * @result the root view
   */
  nsIView* RootView() { return mRootView; }

  /**
   * Set the dimensions of the root window.
   * Called if the root window is resized. The dimensions are in
   * twips
   * @param aWidth of window in twips
   * @param aHeight of window in twips
   */
  NS_IMETHOD  SetWindowDimensions(nscoord aWidth, nscoord aHeight) = 0;

  /**
   * Called to force a redrawing of any dirty areas.
   */
  NS_IMETHOD  Composite(void) = 0;

  /**
   * Called to inform the view manager that the entire area of a view
   * is dirty and needs to be redrawn.
   * @param aView view to paint. should be root view
   * @param aUpdateFlags see bottom of nsIViewManager.h for description
   */
  NS_IMETHOD  UpdateView(nsIView *aView, PRUint32 aUpdateFlags) = 0;

  /**
   * Called to inform the view manager that some portion of a view
   * is dirty and needs to be redrawn. The rect passed in
   * should be in the view's coordinate space.
   * @param aView view to paint. should be root view
   * @param rect rect to mark as damaged
   * @param aUpdateFlags see bottom of nsIViewManager.h for description
   */
  NS_IMETHOD  UpdateView(nsIView *aView, const nsRect &aRect, PRUint32 aUpdateFlags) = 0;

  /**
   * Called to inform the view manager that it should redraw all views.
   * @param aView view to paint. should be root view
   * @param aUpdateFlags see bottom of nsIViewManager.h for description
   */
  NS_IMETHOD  UpdateAllViews(PRUint32 aUpdateFlags) = 0;

  /**
   * Called to dispatch an event to the appropriate view. Often called
   * as a result of receiving a mouse or keyboard event from the widget
   * event system.
   * @param event event to dispatch
   * @result event handling status
   */
  NS_IMETHOD  DispatchEvent(nsGUIEvent *aEvent, nsEventStatus* aStatus) = 0;

  /**
   * Used to grab/capture all mouse events for a specific view,
   * irrespective of the cursor position at which the
   * event occurred.
   * @param aView view to capture mouse events
   * @result event handling status
   */
  NS_IMETHOD  GrabMouseEvents(nsIView *aView, PRBool& aResult) = 0;

  /**
   * Used to grab/capture all keyboard events for a specific view,
   * irrespective of the cursor position at which the
   * event occurred.
   * @param aView view to capture keyboard events
   * @result event handling status
   */
  NS_IMETHOD  GrabKeyEvents(nsIView *aView, PRBool& aResult) = 0;

  /**
   * Get the current view, if any, that's capturing mouse events.
   * @result view that is capturing mouse events or nsnull
   */
  NS_IMETHOD  GetMouseEventGrabber(nsIView *&aView) = 0;

  /**
   * Get the current view, if any, that's capturing keyboard events.
   * @result view that is capturing keyboard events or nsnull
   */
  NS_IMETHOD  GetKeyEventGrabber(nsIView *&aView) = 0;

  /**
   * Given a parent view, insert another view as its child.
   * aSibling and aAbove control the "document order" for the insertion.
   * If aSibling is null, the view is inserted at the end of the document order
   * if aAfter is PR_TRUE, otherwise it is inserted at the beginning.
   * If aSibling is non-null, then if aAfter is PR_TRUE, the view is inserted
   * after the sibling in document order (appearing above the sibling unless
   * overriden by z-order).
   * If it is PR_FALSE, the view is inserted before the sibling.
   * The view manager generates the appopriate dirty regions.
   * @param aParent parent view
   * @param aChild child view
   * @param aSibling sibling view
   * @param aAfter after or before in the document order
   */
  NS_IMETHOD  InsertChild(nsIView *aParent, nsIView *aChild, nsIView *aSibling,
                          PRBool aAfter) = 0;

  /**
   * Given a parent view, insert a placeholder for a view that logically
   * belongs to this parent but has to be moved somewhere else for geometry
   * reasons ("fixed" positioning).
   * @param aParent parent view
   * @param aChild child view
   * @param aSibling sibling view
   * @param aAfter after or before in the document order
   */
  NS_IMETHOD  InsertZPlaceholder(nsIView *aParent, nsIView *aChild, nsIView *aSibling,
                                 PRBool aAfter) = 0;

  /**
   * Remove a specific child view from its parent. This will NOT remove its placeholder
   * if there is one.
   * The view manager generates the appropriate dirty regions.
   * @param aParent parent view
   * @param aChild child view
   */
  NS_IMETHOD  RemoveChild(nsIView *aChild) = 0;

  /**
   * Move a view to the specified position, provided in parent coordinates.
   * The new position is the (0, 0) origin for the view's coordinate system.
   * The view's bounds may extend above or to the left of this point.
   * The view manager generates the appropriate dirty regions.
   * @param aView view to move
   * @param aX x value for new view position
   * @param aY y value for new view position
   */
  NS_IMETHOD  MoveViewTo(nsIView *aView, nscoord aX, nscoord aY) = 0;

  /**
   * Resize a view. In addition to setting the width and height, you can
   * set the x and y of its bounds relative to its position. Negative x and y
   * will let the view extend above and to the left of the (0,0) point in its
   * coordinate system.
   * The view manager generates the appropriate dirty regions.
   * @param aView view to move
   * @param the new bounds relative to the current position
   * @param RepaintExposedAreaOnly
   *     if PR_TRUE Repaint only the expanded or contracted region,
   *     if PR_FALSE Repaint the union of the old and new rectangles.
   */
  NS_IMETHOD  ResizeView(nsIView *aView, const nsRect &aRect,
                         PRBool aRepaintExposedAreaOnly = PR_FALSE) = 0;

  /**
   * Set the region to which a view's descendants are clipped.  The view
   * itself is not clipped to this region; this allows for effects
   * where part of the view is drawn outside the clip region (e.g.,
   * its borders and background).  The view manager generates the
   * appropriate dirty regions.
   * 
   * @param aView view to set clipping for
   * @param aRegion
   *     if null then no clipping is required. In this case all descendant
   * views (but not descendants through placeholder edges) must have their
   * bounds inside the bounds of this view
   *     if non-null, then we will clip this view's descendant views
   * to the region. The region's bounds must be within the bounds of
   * this view. The descendant views' bounds need not be inside the bounds
   * of this view (because we're going to clip them anyway).
   *
   * XXX Currently we only support regions consisting of a single rectangle.
   */
  NS_IMETHOD  SetViewChildClipRegion(nsIView *aView, const nsRegion *aRegion) = 0;

  /**
   * Set the visibility of a view.
   * The view manager generates the appropriate dirty regions.
   * @param aView view to change visibility state of
   * @param visible new visibility state
   */
  NS_IMETHOD  SetViewVisibility(nsIView *aView, nsViewVisibility aVisible) = 0;

  /**
   * Set the z-index of a view. Positive z-indices mean that a view
   * is above its parent in z-order. Negative z-indices mean that a
   * view is below its parent.
   * The view manager generates the appropriate dirty regions.
   * @param aAutoZIndex indicate that the z-index of a view is "auto". An "auto" z-index
   * means that the view does not define a new stacking context,
   * which means that the z-indicies of the view's children are
   * relative to the view's siblings.
   * @param aView view to change z depth of
   * @param aZindex explicit z depth
   * @param aTopMost used when this view is z-index:auto to compare against 
   *        other z-index:auto views.
   *        PR_TRUE if the view should be topmost when compared with 
   *        other z-index:auto views.
   */
  NS_IMETHOD  SetViewZIndex(nsIView *aView, PRBool aAutoZIndex, PRInt32 aZindex, PRBool aTopMost = PR_FALSE) = 0;

  /**
   * Set whether the view "floats" above all other views,
   * which tells the compositor not to consider higher views in
   * the view hierarchy that would geometrically intersect with
   * this view. This is a hack, but it fixes some problems with
   * views that need to be drawn in front of all other views.
   */
  NS_IMETHOD  SetViewFloating(nsIView *aView, PRBool aFloatingView) = 0;

  /**
   * Set whether the view can be bitblitted during scrolling.
   */
  NS_IMETHOD  SetViewBitBltEnabled(nsIView *aView, PRBool aEnable) = 0;

  /**
   * Set whether the view's children should be searched during event processing.
   */
  NS_IMETHOD  SetViewCheckChildEvents(nsIView *aView, PRBool aEnable) = 0;

  /**
   * Used set the transparency status of the content in a view. see
   * nsIView.HasTransparency().
   * @param aTransparent PR_TRUE if there are transparent areas, PR_FALSE otherwise.
   */
  NS_IMETHOD  SetViewContentTransparency(nsIView *aView, PRBool aTransparent) = 0;

  /**
   * Note: This didn't exist in 4.0. Called to set the opacity of a view. 
   * A value of 0.0 means completely transparent. A value of 1.0 means
   * completely opaque.
   * @param opacity new opacity value
   */
  NS_IMETHOD  SetViewOpacity(nsIView *aView, float aOpacity) = 0;

  /**
   * Set the view observer associated with this manager
   * @param aObserver - new observer
   * @result error status
   */
  NS_IMETHOD SetViewObserver(nsIViewObserver *aObserver) = 0;

  /**
   * Get the view observer associated with this manager
   * @param aObserver - out parameter for observer
   * @result error status
   */
  NS_IMETHOD GetViewObserver(nsIViewObserver *&aObserver) = 0;

  /**
   * Get the device context associated with this manager
   * @result device context
   */
  NS_IMETHOD  GetDeviceContext(nsIDeviceContext *&aContext) = 0;

  /**
   * prevent the view manager from refreshing.
   * @return error status
   */
  NS_IMETHOD DisableRefresh(void) = 0;

  /**
   * allow the view manager to refresh. this may cause a synchronous
   * paint to occur inside the call.
   * @param aUpdateFlags see bottom of nsIViewManager.h for description
   * @return error status
   */
  NS_IMETHOD EnableRefresh(PRUint32 aUpdateFlags) = 0;

  /**
   * prevents the view manager from refreshing. allows UpdateView()
   * to notify widgets of damaged regions that should be repainted
   * when the batch is ended.
   * @return error status
   */
  NS_IMETHOD BeginUpdateViewBatch(void) = 0;

  /**
   * allow the view manager to refresh any damaged areas accumulated
   * after the BeginUpdateViewBatch() call.  this may cause a
   * synchronous paint to occur inside the call if aUpdateFlags NS_VMREFRESH_IMMEDIATE is set
   * @param aUpdateFlags see bottom of nsIViewManager.h for description
   * @return error status
   */
  NS_IMETHOD EndUpdateViewBatch(PRUint32 aUpdateFlags) = 0;

  /**
   * set the view that is is considered to be the root scrollable
   * view for the document.
   * @param aScrollable root scrollable view
   * @return error status
   */
  NS_IMETHOD SetRootScrollableView(nsIScrollableView *aScrollable) = 0;

  /**
   * get the view that is is considered to be the root scrollable
   * view for the document.
   * @param aScrollable out parameter for root scrollable view
   * @return error status
   */
  NS_IMETHOD GetRootScrollableView(nsIScrollableView **aScrollable) = 0;

  /**
   * Display the specified view. Used when printing.
   */
  NS_IMETHOD Display(nsIView *aView, nscoord aX, nscoord aY, const nsRect& aClipRect) = 0;

  /**
   * Add a listener to the view manager's composite listener list.
   * @param aListener - new listener
   * @result error status
   */
  NS_IMETHOD AddCompositeListener(nsICompositeListener *aListener) = 0;

  /**
   * Remove a listener from the view manager's composite listener list.
   * @param aListener - listener to remove
   * @result error status
   */
  NS_IMETHOD RemoveCompositeListener(nsICompositeListener *aListener) = 0;

  /**
   * Retrieve the widget that a view renders into.
   * The view must be in the view hierarchy.
   * @param aView the view to get the widget for 
   * @param aWidget the widget that aView renders into.
   * @result error status
   */
  NS_IMETHOD GetWidgetForView(nsIView *aView, nsIWidget **aWidget) = 0;

  /**
   * Retrieve the widget at the root of the view manager. This is the
   * widget associated with the root view, if the root view exists and has
   * a widget.
   */
  NS_IMETHOD GetWidget(nsIWidget **aWidget) = 0;

  /**
   * Force update of view manager widget
   * Callers should use UpdateView(view, NS_VMREFRESH_IMMEDIATE) in most cases instead
   * @result error status
   */
  NS_IMETHOD ForceUpdate() = 0;
  
  /**
   * Turn widget on or off widget movement caching
   */
  NS_IMETHOD IsCachingWidgetChanges(PRBool* aCaching)=0;

  /**
   * Pass true to cache widget changes. pass false to stop. When false is passed
   * All widget changes will be applied.
   */
  NS_IMETHOD CacheWidgetChanges(PRBool aCache)=0;

  /**
   * Control double buffering of the display. If double buffering
   * is enabled the viewmanager is allowed to render to an offscreen
   * drawing surface before copying to the display in order to prevent
   * flicker. If it is disabled all rendering will appear directly on the
   * the display. The display is double buffered by default.
   * @param aDoubleBuffer PR_TRUE to enable double buffering
   *                      PR_FALSE to disable double buffering
   */
  NS_IMETHOD AllowDoubleBuffering(PRBool aDoubleBuffer)=0;

  /**
   * Indicate whether the viewmanager is currently painting
   *
   * @param aPainting PR_TRUE if the viewmanager is painting
   *                  PR_FALSE otherwise
   */
  NS_IMETHOD IsPainting(PRBool& aIsPainting)=0;


  /**
   * Flush pending invalidates which have been queued up
   * between DisableRefresh and EnableRefresh calls. 
   */
  NS_IMETHOD FlushPendingInvalidates()=0;


  /**
   * Set the default background color that the view manager should use
   * to paint otherwise unowned areas. If the color isn't known, just set
   * it to zero (which means 'transparent' since the color is RGBA).
   *
   * @param aColor the default background color
   */
  NS_IMETHOD SetDefaultBackgroundColor(nscolor aColor)=0;

  /**
   * Retrieve the default background color.
   *
   * @param aColor the default background color
   */
  NS_IMETHOD GetDefaultBackgroundColor(nscolor* aColor)=0;

  /**
   * Retrieve the time of the last user event. User events
   * include mouse and keyboard events. The viewmanager
   * saves the time of the last user event.
   *
   * @param aTime Last user event time in microseconds
   */
  NS_IMETHOD GetLastUserEventTime(PRUint32& aTime)=0;

  /**
   * Determine if a rectangle specified in the view's coordinate system 
   * is completely, or partially visible.
   * @param aView view that aRect coordinates are specified relative to
   * @param aRect rectangle in twips to test for visibility 
   * @param aMinTwips is the min. pixel rows or cols at edge of screen 
   *                  needed for object to be counted visible
   * @param aRectVisibility returns eVisible if the rect is visible, 
   *                        otherwise it returns an enum indicating why not
   */
  NS_IMETHOD GetRectVisibility(nsIView *aView, const nsRect &aRect, 
                               PRUint16 aMinTwips, 
                               nsRectVisibility *aRectVisibility)=0;

 protected:
  nsIView* mRootView;
};

//update view now?
#define NS_VMREFRESH_IMMEDIATE          0x0002
//prevent "sync painting"
#define NS_VMREFRESH_NO_SYNC            0x0004
//animate scroll operation
#define NS_VMREFRESH_SMOOTHSCROLL       0x0008

#endif  // nsIViewManager_h___