2010-02-07 11:54:28 +00:00
#! /bin/bash
2008-06-06 12:40:11 +00:00
#
# ***** BEGIN LICENSE BLOCK *****
# Version: MPL 1.1/GPL 2.0/LGPL 2.1
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
# http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Original Code is the Netscape security libraries.
#
# The Initial Developer of the Original Code is
# Netscape Communications Corporation.
2010-02-07 11:54:28 +00:00
# Portions created by the Initial Developer are Copyright (C) 1994-2009
2008-06-06 12:40:11 +00:00
# the Initial Developer. All Rights Reserved.
#
# Contributor(s):
# Dr Vipul Gupta <vipul.gupta@sun.com>, Sun Microsystems Laboratories
# Slavomir Katuscak <slavomir.katuscak@sun.com>, Sun Microsystems
#
# Alternatively, the contents of this file may be used under the terms of
# either the GNU General Public License Version 2 or later (the "GPL"), or
# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
# in which case the provisions of the GPL or the LGPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of either the GPL or the LGPL, and not to allow others to
# use your version of this file under the terms of the MPL, indicate your
# decision by deleting the provisions above and replace them with the notice
# and other provisions required by the GPL or the LGPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the MPL, the GPL or the LGPL.
#
# ***** END LICENSE BLOCK *****
########################################################################
#
# mozilla/security/nss/tests/cert/rcert.sh
#
# Certificate generating and handeling for NSS QA, can be included
# multiple times from all.sh and the individual scripts
#
# needs to work on all Unix and Windows platforms
#
# included from (don't expect this to be up to date)
# --------------------------------------------------
# all.sh
# ssl.sh
# smime.sh
# tools.sh
#
# special strings
# ---------------
# FIXME ... known problems, search for this string
# NOTE .... unexpected behavior
#
# FIXME - Netscape - NSS
########################################################################
############################## cert_init ###############################
# local shell function to initialize this script
########################################################################
cert_init( )
{
SCRIPTNAME = "cert.sh"
if [ -z " ${ CLEANUP } " ] ; then # if nobody else is responsible for
CLEANUP = " ${ SCRIPTNAME } " # cleaning this script will do it
fi
if [ -z " ${ INIT_SOURCED } " ] ; then
cd ../common
. ./init.sh
fi
if [ -z " ${ IOPR_CERT_SOURCED } " ] ; then
. ../iopr/cert_iopr.sh
fi
SCRIPTNAME = "cert.sh"
CRL_GRP_DATE = ` date -u "+%Y%m%d%H%M%SZ" `
if [ -n " $NSS_ENABLE_ECC " ] ; then
html_head "Certutil and Crlutil Tests with ECC"
else
html_head "Certutil and Crlutil Tests"
fi
LIBDIR = " ${ DIST } / ${ OBJDIR } /lib "
ROOTCERTSFILE = ` ls -1 ${ LIBDIR } /*nssckbi* | head -1`
if [ ! " ${ ROOTCERTSFILE } " ] ; then
html_failed "Looking for root certs module."
cert_log "ERROR: Root certs module not found."
Exit 5 "Fatal - Root certs module not found."
else
html_passed "Looking for root certs module."
fi
if [ " ${ OS_ARCH } " = "WINNT" -a " $OS_NAME " = "CYGWIN_NT" ] ; then
ROOTCERTSFILE = ` cygpath -m ${ ROOTCERTSFILE } `
fi
}
cert_log( ) ###################### write the cert_status file
{
echo " $SCRIPTNAME $* "
echo $* >>${ CERT_LOG_FILE }
}
################################ certu #################################
# local shell function to call certutil, also: writes action and options to
# stdout, sets variable RET and writes results to the html file results
########################################################################
certu( )
{
echo " $SCRIPTNAME : ${ CU_ACTION } -------------------------- "
2011-10-07 20:37:26 +00:00
EXPECTED = ${ RETEXPECTED -0 }
2008-06-06 12:40:11 +00:00
if [ -n " ${ CU_SUBJECT } " ] ; then
#the subject of the cert contains blanks, and the shell
#will strip the quotes off the string, if called otherwise...
echo " certutil -s \" ${ CU_SUBJECT } \" $* "
${ PROFTOOL } ${ BINDIR } /certutil -s " ${ CU_SUBJECT } " $*
RET = $?
CU_SUBJECT = ""
else
echo " certutil $* "
${ PROFTOOL } ${ BINDIR } /certutil $*
RET = $?
fi
2011-10-07 20:37:26 +00:00
if [ " $RET " -ne " $EXPECTED " ] ; then
2008-06-06 12:40:11 +00:00
CERTFAILED = $RET
2011-10-07 20:37:26 +00:00
html_failed " ${ CU_ACTION } ( $RET = $EXPECTED ) "
2008-06-06 12:40:11 +00:00
cert_log " ERROR: ${ CU_ACTION } failed $RET "
else
html_passed " ${ CU_ACTION } "
fi
return $RET
}
################################ crlu #################################
# local shell function to call crlutil, also: writes action and options to
# stdout, sets variable RET and writes results to the html file results
########################################################################
crlu( )
{
echo " $SCRIPTNAME : ${ CU_ACTION } -------------------------- "
CRLUTIL = "crlutil -q"
echo " $CRLUTIL $* "
${ PROFTOOL } ${ BINDIR } /$CRLUTIL $*
RET = $?
if [ " $RET " -ne 0 ] ; then
CRLFAILED = $RET
html_failed " ${ CU_ACTION } ( $RET ) "
cert_log " ERROR: ${ CU_ACTION } failed $RET "
else
html_passed " ${ CU_ACTION } "
fi
return $RET
}
modu( )
{
echo " $SCRIPTNAME : ${ CU_ACTION } -------------------------- "
MODUTIL = "modutil"
echo " $MODUTIL $* "
# echo is used to press Enter expected by modutil
echo | ${ BINDIR } /$MODUTIL $*
RET = $?
if [ " $RET " -ne 0 ] ; then
MODFAILED = $RET
html_failed " ${ CU_ACTION } ( $RET ) "
cert_log " ERROR: ${ CU_ACTION } failed $RET "
else
html_passed " ${ CU_ACTION } "
fi
return $RET
}
############################# cert_init_cert ##########################
# local shell function to initialize creation of client and server certs
########################################################################
cert_init_cert( )
{
CERTDIR = " $1 "
CERTNAME = " $2 "
CERTSERIAL = " $3 "
DOMAIN = " $4 "
if [ ! -d " ${ CERTDIR } " ] ; then
mkdir -p " ${ CERTDIR } "
else
echo " $SCRIPTNAME : WARNING - ${ CERTDIR } exists "
fi
cd " ${ CERTDIR } "
CERTDIR = "."
PROFILEDIR = ` cd ${ CERTDIR } ; pwd `
if [ " ${ OS_ARCH } " = "WINNT" -a " $OS_NAME " = "CYGWIN_NT" ] ; then
PROFILEDIR = ` cygpath -m ${ PROFILEDIR } `
fi
if [ -n " ${ MULTIACCESS_DBM } " ] ; then
PROFILEDIR = " multiaccess: ${ DOMAIN } "
fi
noise
}
############################# hw_acc #################################
# local shell function to add hw accelerator modules to the db
########################################################################
hw_acc( )
{
HW_ACC_RET = 0
HW_ACC_ERR = ""
if [ -n " $O_HWACC " -a " $O_HWACC " = ON -a -z " $USE_64 " ] ; then
echo " creating $CERTNAME s cert with hwaccelerator... "
#case $ACCELERATOR in
#rainbow)
echo "modutil -add rainbow -libfile /usr/lib/libcryptoki22.so "
echo " -dbdir ${ PROFILEDIR } 2>&1 "
echo | ${ BINDIR } /modutil -add rainbow -libfile /usr/lib/libcryptoki22.so \
-dbdir ${ PROFILEDIR } 2>& 1
if [ " $? " -ne 0 ] ; then
echo "modutil -add rainbow failed in `pwd`"
HW_ACC_RET = 1
HW_ACC_ERR = "modutil -add rainbow"
fi
echo "modutil -add ncipher "
echo " -libfile /opt/nfast/toolkits/pkcs11/libcknfast.so "
echo " -dbdir ${ PROFILEDIR } 2>&1 "
echo | ${ BINDIR } /modutil -add ncipher \
-libfile /opt/nfast/toolkits/pkcs11/libcknfast.so \
-dbdir ${ PROFILEDIR } 2>& 1
if [ " $? " -ne 0 ] ; then
echo "modutil -add ncipher failed in `pwd`"
HW_ACC_RET = ` expr $HW_ACC_RET + 2`
HW_ACC_ERR = " $HW_ACC_ERR ,modutil -add ncipher "
fi
if [ " $HW_ACC_RET " -ne 0 ] ; then
html_failed " Adding HW accelerators to certDB for ${ CERTNAME } ( $HW_ACC_RET ) "
else
html_passed " Adding HW accelerators to certDB for ${ CERTNAME } "
fi
fi
return $HW_ACC_RET
}
############################# cert_create_cert #########################
# local shell function to create client certs
# initialize DB, import
# root cert
# add cert to DB
########################################################################
cert_create_cert( )
{
cert_init_cert " $1 " " $2 " " $3 " " $4 "
CU_ACTION = " Initializing ${ CERTNAME } 's Cert DB "
certu -N -d " ${ PROFILEDIR } " -f " ${ R_PWFILE } " 2>& 1
if [ " $RET " -ne 0 ] ; then
return $RET
fi
CU_ACTION = " Loading root cert module to ${ CERTNAME } 's Cert DB "
modu -add "RootCerts" -libfile " ${ ROOTCERTSFILE } " -dbdir " ${ PROFILEDIR } " 2>& 1
if [ " $RET " -ne 0 ] ; then
return $RET
fi
hw_acc
CU_ACTION = " Import Root CA for $CERTNAME "
certu -A -n "TestCA" -t "TC,TC,TC" -f " ${ R_PWFILE } " -d " ${ PROFILEDIR } " \
2011-10-07 20:37:26 +00:00
-i " ${ R_CADIR } /TestCA.ca.cert " 2>& 1
2008-06-06 12:40:11 +00:00
if [ " $RET " -ne 0 ] ; then
return $RET
fi
if [ -n " $NSS_ENABLE_ECC " ] ; then
CU_ACTION = " Import EC Root CA for $CERTNAME "
certu -A -n "TestCA-ec" -t "TC,TC,TC" -f " ${ R_PWFILE } " \
2011-10-07 20:37:26 +00:00
-d " ${ PROFILEDIR } " -i " ${ R_CADIR } /TestCA-ec.ca.cert " 2>& 1
2008-06-06 12:40:11 +00:00
if [ " $RET " -ne 0 ] ; then
return $RET
fi
fi
cert_add_cert " $5 "
return $?
}
############################# cert_add_cert ############################
# local shell function to add client certs to an existing CERT DB
# generate request
# sign request
# import Cert
#
########################################################################
cert_add_cert( )
{
CU_ACTION = " Generate Cert Request for $CERTNAME "
CU_SUBJECT = " CN= $CERTNAME , E= ${ CERTNAME } @bogus.com, O=BOGUS NSS, L=Mountain View, ST=California, C=US "
certu -R -d " ${ PROFILEDIR } " -f " ${ R_PWFILE } " -z " ${ R_NOISE_FILE } " -o req 2>& 1
if [ " $RET " -ne 0 ] ; then
return $RET
fi
CU_ACTION = " Sign ${ CERTNAME } 's Request "
certu -C -c "TestCA" -m " $CERTSERIAL " -v 60 -d " ${ P_R_CADIR } " \
-i req -o " ${ CERTNAME } .cert " -f " ${ R_PWFILE } " " $1 " 2>& 1
if [ " $RET " -ne 0 ] ; then
return $RET
fi
CU_ACTION = " Import $CERTNAME 's Cert "
certu -A -n " $CERTNAME " -t "u,u,u" -d " ${ PROFILEDIR } " -f " ${ R_PWFILE } " \
-i " ${ CERTNAME } .cert " 2>& 1
if [ " $RET " -ne 0 ] ; then
return $RET
fi
cert_log " SUCCESS: $CERTNAME 's Cert Created "
#
# Generate and add EC cert
#
if [ -n " $NSS_ENABLE_ECC " ] ; then
CURVE = "secp384r1"
CU_ACTION = " Generate EC Cert Request for $CERTNAME "
CU_SUBJECT = " CN= $CERTNAME , E= ${ CERTNAME } -ec@bogus.com, O=BOGUS NSS, L=Mountain View, ST=California, C=US "
certu -R -k ec -q " ${ CURVE } " -d " ${ PROFILEDIR } " -f " ${ R_PWFILE } " \
-z " ${ R_NOISE_FILE } " -o req 2>& 1
if [ " $RET " -ne 0 ] ; then
return $RET
fi
CU_ACTION = " Sign ${ CERTNAME } 's EC Request "
certu -C -c "TestCA-ec" -m " $CERTSERIAL " -v 60 -d " ${ P_R_CADIR } " \
-i req -o " ${ CERTNAME } -ec.cert " -f " ${ R_PWFILE } " " $1 " 2>& 1
if [ " $RET " -ne 0 ] ; then
return $RET
fi
CU_ACTION = " Import $CERTNAME 's EC Cert "
certu -A -n " ${ CERTNAME } -ec " -t "u,u,u" -d " ${ PROFILEDIR } " \
-f " ${ R_PWFILE } " -i " ${ CERTNAME } -ec.cert " 2>& 1
if [ " $RET " -ne 0 ] ; then
return $RET
fi
cert_log " SUCCESS: $CERTNAME 's EC Cert Created "
# Generate EC certificate signed with RSA
CU_ACTION = " Generate mixed EC Cert Request for $CERTNAME "
CU_SUBJECT = " CN= $CERTNAME , E= ${ CERTNAME } -ecmixed@bogus.com, O=BOGUS NSS, L=Mountain View, ST=California, C=US "
certu -R -k ec -q " ${ CURVE } " -d " ${ PROFILEDIR } " -f " ${ R_PWFILE } " \
-z " ${ R_NOISE_FILE } " -o req 2>& 1
if [ " $RET " -ne 0 ] ; then
return $RET
fi
CU_ACTION = " Sign ${ CERTNAME } 's EC Request with RSA "
# Avoid conflicting serial numbers with TestCA issuer by keeping
# this set far away. A smaller number risks colliding with the
# extended ssl user certificates.
NEWSERIAL = ` expr ${ CERTSERIAL } + 10000`
certu -C -c "TestCA" -m " $NEWSERIAL " -v 60 -d " ${ P_R_CADIR } " \
-i req -o " ${ CERTNAME } -ecmixed.cert " -f " ${ R_PWFILE } " " $1 " 2>& 1
if [ " $RET " -ne 0 ] ; then
return $RET
fi
CU_ACTION = " Import $CERTNAME 's mixed EC Cert "
certu -A -n " ${ CERTNAME } -ecmixed " -t "u,u,u" -d " ${ PROFILEDIR } " \
-f " ${ R_PWFILE } " -i " ${ CERTNAME } -ecmixed.cert " 2>& 1
if [ " $RET " -ne 0 ] ; then
return $RET
fi
cert_log " SUCCESS: $CERTNAME 's mixed EC Cert Created "
fi
return 0
}
################################# cert_all_CA ################################
# local shell function to build the additional Temp. Certificate Authority (CA)
# used for the "real life" ssl test with 2 different CA's in the
2010-07-19 05:45:52 +00:00
# client and in the server's dir
2008-06-06 12:40:11 +00:00
##########################################################################
cert_all_CA( )
{
echo nss > ${ PWFILE }
ALL_CU_SUBJECT = "CN=NSS Test CA, O=BOGUS NSS, L=Mountain View, ST=California, C=US"
cert_CA $CADIR TestCA -x "CTu,CTu,CTu" ${ D_CA } "1"
ALL_CU_SUBJECT = "CN=NSS Server Test CA, O=BOGUS NSS, L=Santa Clara, ST=California, C=US"
cert_CA $SERVER_CADIR serverCA -x "Cu,Cu,Cu" ${ D_SERVER_CA } "2"
ALL_CU_SUBJECT = "CN=NSS Chain1 Server Test CA, O=BOGUS NSS, L=Santa Clara, ST=California, C=US"
cert_CA $SERVER_CADIR chain-1-serverCA "-c serverCA" "u,u,u" ${ D_SERVER_CA } "3"
ALL_CU_SUBJECT = "CN=NSS Chain2 Server Test CA, O=BOGUS NSS, L=Santa Clara, ST=California, C=US"
cert_CA $SERVER_CADIR chain-2-serverCA "-c chain-1-serverCA" "u,u,u" ${ D_SERVER_CA } "4"
ALL_CU_SUBJECT = "CN=NSS Client Test CA, O=BOGUS NSS, L=Santa Clara, ST=California, C=US"
cert_CA $CLIENT_CADIR clientCA -x "Tu,Cu,Cu" ${ D_CLIENT_CA } "5"
ALL_CU_SUBJECT = "CN=NSS Chain1 Client Test CA, O=BOGUS NSS, L=Santa Clara, ST=California, C=US"
cert_CA $CLIENT_CADIR chain-1-clientCA "-c clientCA" "u,u,u" ${ D_CLIENT_CA } "6"
ALL_CU_SUBJECT = "CN=NSS Chain2 Client Test CA, O=BOGUS NSS, L=Santa Clara, ST=California, C=US"
cert_CA $CLIENT_CADIR chain-2-clientCA "-c chain-1-clientCA" "u,u,u" ${ D_CLIENT_CA } "7"
rm $CLIENT_CADIR /root.cert $SERVER_CADIR /root.cert
# root.cert in $CLIENT_CADIR and in $SERVER_CADIR is one of the last
# in the chain
if [ -n " $NSS_ENABLE_ECC " ] ; then
#
# Create EC version of TestCA
CA_CURVE = "secp521r1"
ALL_CU_SUBJECT = "CN=NSS Test CA (ECC), O=BOGUS NSS, L=Mountain View, ST=California, C=US"
cert_ec_CA $CADIR TestCA-ec -x "CTu,CTu,CTu" ${ D_CA } "1" ${ CA_CURVE }
#
# Create EC versions of the intermediate CA certs
ALL_CU_SUBJECT = "CN=NSS Server Test CA (ECC), O=BOGUS NSS, L=Santa Clara, ST=California, C=US"
cert_ec_CA $SERVER_CADIR serverCA-ec -x "Cu,Cu,Cu" ${ D_SERVER_CA } "2" ${ CA_CURVE }
ALL_CU_SUBJECT = "CN=NSS Chain1 Server Test CA (ECC), O=BOGUS NSS, L=Santa Clara, ST=California, C=US"
cert_ec_CA $SERVER_CADIR chain-1-serverCA-ec "-c serverCA-ec" "u,u,u" ${ D_SERVER_CA } "3" ${ CA_CURVE }
ALL_CU_SUBJECT = "CN=NSS Chain2 Server Test CA (ECC), O=BOGUS NSS, L=Santa Clara, ST=California, C=US"
cert_ec_CA $SERVER_CADIR chain-2-serverCA-ec "-c chain-1-serverCA-ec" "u,u,u" ${ D_SERVER_CA } "4" ${ CA_CURVE }
ALL_CU_SUBJECT = "CN=NSS Client Test CA (ECC), O=BOGUS NSS, L=Santa Clara, ST=California, C=US"
cert_ec_CA $CLIENT_CADIR clientCA-ec -x "Tu,Cu,Cu" ${ D_CLIENT_CA } "5" ${ CA_CURVE }
ALL_CU_SUBJECT = "CN=NSS Chain1 Client Test CA (ECC), O=BOGUS NSS, L=Santa Clara, ST=California, C=US"
cert_ec_CA $CLIENT_CADIR chain-1-clientCA-ec "-c clientCA-ec" "u,u,u" ${ D_CLIENT_CA } "6" ${ CA_CURVE }
ALL_CU_SUBJECT = "CN=NSS Chain2 Client Test CA (ECC), O=BOGUS NSS, L=Santa Clara, ST=California, C=US"
cert_ec_CA $CLIENT_CADIR chain-2-clientCA-ec "-c chain-1-clientCA-ec" "u,u,u" ${ D_CLIENT_CA } "7" ${ CA_CURVE }
rm $CLIENT_CADIR /ecroot.cert $SERVER_CADIR /ecroot.cert
# ecroot.cert in $CLIENT_CADIR and in $SERVER_CADIR is one of the last
# in the chain
fi
}
################################# cert_CA ################################
# local shell function to build the Temp. Certificate Authority (CA)
# used for testing purposes, creating a CA Certificate and a root cert
##########################################################################
cert_CA( )
{
CUR_CADIR = $1
NICKNAME = $2
SIGNER = $3
TRUSTARG = $4
DOMAIN = $5
CERTSERIAL = $6
echo " $SCRIPTNAME : Creating a CA Certificate $NICKNAME ========================== "
if [ ! -d " ${ CUR_CADIR } " ] ; then
mkdir -p " ${ CUR_CADIR } "
fi
cd ${ CUR_CADIR }
pwd
LPROFILE = ` pwd `
if [ " ${ OS_ARCH } " = "WINNT" -a " $OS_NAME " = "CYGWIN_NT" ] ; then
LPROFILE = ` cygpath -m ${ LPROFILE } `
fi
if [ -n " ${ MULTIACCESS_DBM } " ] ; then
LPROFILE = " multiaccess: ${ DOMAIN } "
fi
if [ " $SIGNER " = "-x" ] ; then # self signed -> create DB
CU_ACTION = "Creating CA Cert DB"
certu -N -d " ${ LPROFILE } " -f ${ R_PWFILE } 2>& 1
if [ " $RET " -ne 0 ] ; then
Exit 5 " Fatal - failed to create CA $NICKNAME "
fi
CU_ACTION = "Loading root cert module to CA Cert DB"
modu -add "RootCerts" -libfile " ${ ROOTCERTSFILE } " -dbdir " ${ LPROFILE } " 2>& 1
if [ " $RET " -ne 0 ] ; then
return $RET
fi
echo " $SCRIPTNAME : Certificate initialized ---------- "
fi
################# Creating CA Cert ######################################
#
CU_ACTION = " Creating CA Cert $NICKNAME "
CU_SUBJECT = $ALL_CU_SUBJECT
certu -S -n $NICKNAME -t $TRUSTARG -v 600 $SIGNER -d ${ LPROFILE } -1 -2 -5 \
-f ${ R_PWFILE } -z ${ R_NOISE_FILE } -m $CERTSERIAL 2>& 1 <<CERTSC RIPT
5
6
9
n
y
-1
n
5
6
7
9
n
CERTSCRIPT
if [ " $RET " -ne 0 ] ; then
echo " return value is $RET "
Exit 6 "Fatal - failed to create CA cert"
fi
################# Exporting Root Cert ###################################
#
CU_ACTION = "Exporting Root Cert"
certu -L -n $NICKNAME -r -d ${ LPROFILE } -o root.cert
if [ " $RET " -ne 0 ] ; then
Exit 7 "Fatal - failed to export root cert"
fi
cp root.cert ${ NICKNAME } .ca.cert
}
################################ cert_ec_CA ##############################
# local shell function to build the Temp. Certificate Authority (CA)
# used for testing purposes, creating a CA Certificate and a root cert
# This is the ECC version of cert_CA.
##########################################################################
cert_ec_CA( )
{
CUR_CADIR = $1
NICKNAME = $2
SIGNER = $3
TRUSTARG = $4
DOMAIN = $5
CERTSERIAL = $6
CURVE = $7
echo " $SCRIPTNAME : Creating an EC CA Certificate $NICKNAME ========================== "
if [ ! -d " ${ CUR_CADIR } " ] ; then
mkdir -p " ${ CUR_CADIR } "
fi
cd ${ CUR_CADIR }
pwd
LPROFILE = .
if [ -n " ${ MULTIACCESS_DBM } " ] ; then
LPROFILE = " multiaccess: ${ DOMAIN } "
fi
################# Creating an EC CA Cert ################################
#
CU_ACTION = " Creating EC CA Cert $NICKNAME "
CU_SUBJECT = $ALL_CU_SUBJECT
certu -S -n $NICKNAME -k ec -q $CURVE -t $TRUSTARG -v 600 $SIGNER \
-d ${ LPROFILE } -1 -2 -5 -f ${ R_PWFILE } -z ${ R_NOISE_FILE } \
-m $CERTSERIAL 2>& 1 <<CERTSC RIPT
5
6
9
n
y
-1
n
5
6
7
9
n
CERTSCRIPT
if [ " $RET " -ne 0 ] ; then
echo " return value is $RET "
Exit 6 "Fatal - failed to create EC CA cert"
fi
################# Exporting EC Root Cert ################################
#
CU_ACTION = "Exporting EC Root Cert"
certu -L -n $NICKNAME -r -d ${ LPROFILE } -o ecroot.cert
if [ " $RET " -ne 0 ] ; then
Exit 7 "Fatal - failed to export ec root cert"
fi
cp ecroot.cert ${ NICKNAME } .ca.cert
}
############################## cert_smime_client #############################
# local shell function to create client Certificates for S/MIME tests
##############################################################################
cert_smime_client( )
{
CERTFAILED = 0
echo " $SCRIPTNAME : Creating Client CA Issued Certificates ============== "
cert_create_cert ${ ALICEDIR } "Alice" 30 ${ D_ALICE }
cert_create_cert ${ BOBDIR } "Bob" 40 ${ D_BOB }
echo " $SCRIPTNAME : Creating Dave's Certificate ------------------------- "
cert_create_cert " ${ DAVEDIR } " Dave 50 ${ D_DAVE }
## XXX With this new script merging ECC and non-ECC tests, the
## call to cert_create_cert ends up creating two separate certs
## one for Eve and another for Eve-ec but they both end up with
## the same Subject Alt Name Extension, i.e., both the cert for
## Eve@bogus.com and the cert for Eve-ec@bogus.com end up
## listing eve@bogus.net in the Certificate Subject Alt Name extension.
## This can cause a problem later when cmsutil attempts to create
## enveloped data and accidently picks up the ECC cert (NSS currently
## does not support ECC for enveloped data creation). This script
## avoids the problem by ensuring that these conflicting certs are
## never added to the same cert database (see comment marked XXXX).
echo " $SCRIPTNAME : Creating multiEmail's Certificate -------------------- "
cert_create_cert " ${ EVEDIR } " "Eve" 60 ${ D_EVE } "-7 eve@bogus.net,eve@bogus.cc,beve@bogus.com"
#echo "************* Copying CA files to ${SERVERDIR}"
#cp ${CADIR}/*.db .
#hw_acc
#########################################################################
#
#cd ${CERTDIR}
#CU_ACTION="Creating ${CERTNAME}'s Server Cert"
#CU_SUBJECT="CN=${CERTNAME}, E=${CERTNAME}@bogus.com, O=BOGUS Netscape, L=Mountain View, ST=California, C=US"
#certu -S -n "${CERTNAME}" -c "TestCA" -t "u,u,u" -m "$CERTSERIAL" \
# -d ${PROFILEDIR} -f "${R_PWFILE}" -z "${R_NOISE_FILE}" -v 60 2>&1
#CU_ACTION="Export Dave's Cert"
#cd ${DAVEDIR}
#certu -L -n "Dave" -r -d ${P_R_DAVE} -o Dave.cert
################# Importing Certificates for S/MIME tests ###############
#
echo " $SCRIPTNAME : Importing Certificates ============================== "
CU_ACTION = "Import Bob's cert into Alice's db"
2011-08-19 15:27:10 +00:00
certu -E -t ",," -d ${ P_R_ALICEDIR } -f ${ R_PWFILE } \
2008-06-06 12:40:11 +00:00
-i ${ R_BOBDIR } /Bob.cert 2>& 1
CU_ACTION = "Import Dave's cert into Alice's DB"
2011-08-19 15:27:10 +00:00
certu -E -t ",," -d ${ P_R_ALICEDIR } -f ${ R_PWFILE } \
2008-06-06 12:40:11 +00:00
-i ${ R_DAVEDIR } /Dave.cert 2>& 1
CU_ACTION = "Import Dave's cert into Bob's DB"
2011-08-19 15:27:10 +00:00
certu -E -t ",," -d ${ P_R_BOBDIR } -f ${ R_PWFILE } \
2008-06-06 12:40:11 +00:00
-i ${ R_DAVEDIR } /Dave.cert 2>& 1
CU_ACTION = "Import Eve's cert into Alice's DB"
2011-08-19 15:27:10 +00:00
certu -E -t ",," -d ${ P_R_ALICEDIR } -f ${ R_PWFILE } \
2008-06-06 12:40:11 +00:00
-i ${ R_EVEDIR } /Eve.cert 2>& 1
CU_ACTION = "Import Eve's cert into Bob's DB"
2011-08-19 15:27:10 +00:00
certu -E -t ",," -d ${ P_R_BOBDIR } -f ${ R_PWFILE } \
2008-06-06 12:40:11 +00:00
-i ${ R_EVEDIR } /Eve.cert 2>& 1
if [ -n " $NSS_ENABLE_ECC " ] ; then
echo " $SCRIPTNAME : Importing EC Certificates ============================== "
CU_ACTION = "Import Bob's EC cert into Alice's db"
2011-08-19 15:27:10 +00:00
certu -E -t ",," -d ${ P_R_ALICEDIR } -f ${ R_PWFILE } \
2008-06-06 12:40:11 +00:00
-i ${ R_BOBDIR } /Bob-ec.cert 2>& 1
CU_ACTION = "Import Dave's EC cert into Alice's DB"
2011-08-19 15:27:10 +00:00
certu -E -t ",," -d ${ P_R_ALICEDIR } -f ${ R_PWFILE } \
2008-06-06 12:40:11 +00:00
-i ${ R_DAVEDIR } /Dave-ec.cert 2>& 1
CU_ACTION = "Import Dave's EC cert into Bob's DB"
2011-08-19 15:27:10 +00:00
certu -E -t ",," -d ${ P_R_BOBDIR } -f ${ R_PWFILE } \
2008-06-06 12:40:11 +00:00
-i ${ R_DAVEDIR } /Dave-ec.cert 2>& 1
## XXXX Do not import Eve's EC cert until we can make sure that
## the email addresses listed in the Subject Alt Name Extension
## inside Eve's ECC and non-ECC certs are different.
# CU_ACTION="Import Eve's EC cert into Alice's DB"
2011-08-19 15:27:10 +00:00
# certu -E -t ",," -d ${P_R_ALICEDIR} -f ${R_PWFILE} \
2008-06-06 12:40:11 +00:00
# -i ${R_EVEDIR}/Eve-ec.cert 2>&1
# CU_ACTION="Import Eve's EC cert into Bob's DB"
2011-08-19 15:27:10 +00:00
# certu -E -t ",," -d ${P_R_BOBDIR} -f ${R_PWFILE} \
2008-06-06 12:40:11 +00:00
# -i ${R_EVEDIR}/Eve-ec.cert 2>&1
fi
if [ " $CERTFAILED " != 0 ] ; then
cert_log " ERROR: SMIME failed $RET "
else
cert_log "SUCCESS: SMIME passed"
fi
}
############################## cert_extended_ssl #######################
# local shell function to create client + server certs for extended SSL test
########################################################################
cert_extended_ssl( )
{
################# Creating Certs for extended SSL test ####################
#
CERTFAILED = 0
echo " $SCRIPTNAME : Creating Certificates, issued by the last =============== "
echo " of a chain of CA's which are not in the same database============"
echo "Server Cert"
cert_init_cert ${ EXT_SERVERDIR } " ${ HOSTADDR } " 1 ${ D_EXT_SERVER }
CU_ACTION = " Initializing ${ CERTNAME } 's Cert DB (ext.) "
certu -N -d " ${ PROFILEDIR } " -f " ${ R_PWFILE } " 2>& 1
CU_ACTION = " Loading root cert module to ${ CERTNAME } 's Cert DB (ext.) "
modu -add "RootCerts" -libfile " ${ ROOTCERTSFILE } " -dbdir " ${ PROFILEDIR } " 2>& 1
CU_ACTION = " Generate Cert Request for $CERTNAME (ext) "
CU_SUBJECT = " CN= $CERTNAME , E= ${ CERTNAME } @bogus.com, O=BOGUS NSS, L=Mountain View, ST=California, C=US "
certu -R -d " ${ PROFILEDIR } " -f " ${ R_PWFILE } " -z " ${ R_NOISE_FILE } " -o req 2>& 1
CU_ACTION = " Sign ${ CERTNAME } 's Request (ext) "
cp ${ CERTDIR } /req ${ SERVER_CADIR }
certu -C -c "chain-2-serverCA" -m 200 -v 60 -d " ${ P_SERVER_CADIR } " \
-i req -o " ${ CERTNAME } .cert " -f " ${ R_PWFILE } " 2>& 1
CU_ACTION = " Import $CERTNAME 's Cert -t u,u,u (ext) "
certu -A -n " $CERTNAME " -t "u,u,u" -d " ${ PROFILEDIR } " -f " ${ R_PWFILE } " \
-i " ${ CERTNAME } .cert " 2>& 1
CU_ACTION = " Import Client Root CA -t T,, for $CERTNAME (ext.) "
certu -A -n "clientCA" -t "T,," -f " ${ R_PWFILE } " -d " ${ PROFILEDIR } " \
-i " ${ CLIENT_CADIR } /clientCA.ca.cert " 2>& 1
if [ -n " $NSS_ENABLE_ECC " ] ; then
#
# Repeat the above for EC certs
#
EC_CURVE = "secp256r1"
CU_ACTION = " Generate EC Cert Request for $CERTNAME (ext) "
CU_SUBJECT = " CN= $CERTNAME , E= ${ CERTNAME } -ec@bogus.com, O=BOGUS NSS, L=Mountain View, ST=California, C=US "
certu -R -d " ${ PROFILEDIR } " -k ec -q " ${ EC_CURVE } " -f " ${ R_PWFILE } " \
-z " ${ R_NOISE_FILE } " -o req 2>& 1
CU_ACTION = " Sign ${ CERTNAME } 's EC Request (ext) "
cp ${ CERTDIR } /req ${ SERVER_CADIR }
certu -C -c "chain-2-serverCA-ec" -m 200 -v 60 -d " ${ P_SERVER_CADIR } " \
-i req -o " ${ CERTNAME } -ec.cert " -f " ${ R_PWFILE } " 2>& 1
CU_ACTION = " Import $CERTNAME 's EC Cert -t u,u,u (ext) "
certu -A -n " ${ CERTNAME } -ec " -t "u,u,u" -d " ${ PROFILEDIR } " \
-f " ${ R_PWFILE } " -i " ${ CERTNAME } -ec.cert " 2>& 1
CU_ACTION = " Import Client EC Root CA -t T,, for $CERTNAME (ext.) "
certu -A -n "clientCA-ec" -t "T,," -f " ${ R_PWFILE } " -d " ${ PROFILEDIR } " \
-i " ${ CLIENT_CADIR } /clientCA-ec.ca.cert " 2>& 1
#
# done with EC certs
#
# Repeat again for mixed EC certs
#
EC_CURVE = "secp256r1"
CU_ACTION = " Generate mixed EC Cert Request for $CERTNAME (ext) "
CU_SUBJECT = " CN= $CERTNAME , E= ${ CERTNAME } -ecmixed@bogus.com, O=BOGUS NSS, L=Mountain View, ST=California, C=US "
certu -R -d " ${ PROFILEDIR } " -k ec -q " ${ EC_CURVE } " -f " ${ R_PWFILE } " \
-z " ${ R_NOISE_FILE } " -o req 2>& 1
CU_ACTION = " Sign ${ CERTNAME } 's mixed EC Request (ext) "
cp ${ CERTDIR } /req ${ SERVER_CADIR }
certu -C -c "chain-2-serverCA" -m 201 -v 60 -d " ${ P_SERVER_CADIR } " \
-i req -o " ${ CERTNAME } -ecmixed.cert " -f " ${ R_PWFILE } " 2>& 1
CU_ACTION = " Import $CERTNAME 's mixed EC Cert -t u,u,u (ext) "
certu -A -n " ${ CERTNAME } -ecmixed " -t "u,u,u" -d " ${ PROFILEDIR } " \
-f " ${ R_PWFILE } " -i " ${ CERTNAME } -ecmixed.cert " 2>& 1
# CU_ACTION="Import Client mixed EC Root CA -t T,, for $CERTNAME (ext.)"
# certu -A -n "clientCA-ecmixed" -t "T,," -f "${R_PWFILE}" \
# -d "${PROFILEDIR}" -i "${CLIENT_CADIR}/clientCA-ecmixed.ca.cert" \
# 2>&1
fi
echo "Importing all the server's own CA chain into the servers DB"
for CA in ` find ${ SERVER_CADIR } -name "?*.ca.cert" ` ;
do
N = ` basename $CA | sed -e "s/.ca.cert//" `
if [ $N = "serverCA" -o $N = "serverCA-ec" ] ; then
T = "-t C,C,C"
else
T = "-t u,u,u"
fi
CU_ACTION = " Import $N CA $T for $CERTNAME (ext.) "
certu -A -n $N $T -f " ${ R_PWFILE } " -d " ${ PROFILEDIR } " \
-i " ${ CA } " 2>& 1
done
#============
echo "Client Cert"
cert_init_cert ${ EXT_CLIENTDIR } ExtendedSSLUser 1 ${ D_EXT_CLIENT }
CU_ACTION = " Initializing ${ CERTNAME } 's Cert DB (ext.) "
certu -N -d " ${ PROFILEDIR } " -f " ${ R_PWFILE } " 2>& 1
CU_ACTION = " Loading root cert module to ${ CERTNAME } 's Cert DB (ext.) "
modu -add "RootCerts" -libfile " ${ ROOTCERTSFILE } " -dbdir " ${ PROFILEDIR } " 2>& 1
CU_ACTION = " Generate Cert Request for $CERTNAME (ext) "
CU_SUBJECT = " CN= $CERTNAME , E= ${ CERTNAME } @bogus.com, O=BOGUS NSS, L=Mountain View, ST=California, C=US "
certu -R -d " ${ PROFILEDIR } " -f " ${ R_PWFILE } " -z " ${ R_NOISE_FILE } " \
-o req 2>& 1
CU_ACTION = " Sign ${ CERTNAME } 's Request (ext) "
cp ${ CERTDIR } /req ${ CLIENT_CADIR }
certu -C -c "chain-2-clientCA" -m 300 -v 60 -d " ${ P_CLIENT_CADIR } " \
-i req -o " ${ CERTNAME } .cert " -f " ${ R_PWFILE } " 2>& 1
CU_ACTION = " Import $CERTNAME 's Cert -t u,u,u (ext) "
certu -A -n " $CERTNAME " -t "u,u,u" -d " ${ PROFILEDIR } " -f " ${ R_PWFILE } " \
-i " ${ CERTNAME } .cert " 2>& 1
CU_ACTION = " Import Server Root CA -t C,C,C for $CERTNAME (ext.) "
certu -A -n "serverCA" -t "C,C,C" -f " ${ R_PWFILE } " -d " ${ PROFILEDIR } " \
-i " ${ SERVER_CADIR } /serverCA.ca.cert " 2>& 1
if [ -n " $NSS_ENABLE_ECC " ] ; then
#
# Repeat the above for EC certs
#
CU_ACTION = " Generate EC Cert Request for $CERTNAME (ext) "
CU_SUBJECT = " CN= $CERTNAME , E= ${ CERTNAME } -ec@bogus.com, O=BOGUS NSS, L=Mountain View, ST=California, C=US "
certu -R -d " ${ PROFILEDIR } " -k ec -q " ${ EC_CURVE } " -f " ${ R_PWFILE } " \
-z " ${ R_NOISE_FILE } " -o req 2>& 1
CU_ACTION = " Sign ${ CERTNAME } 's EC Request (ext) "
cp ${ CERTDIR } /req ${ CLIENT_CADIR }
certu -C -c "chain-2-clientCA-ec" -m 300 -v 60 -d " ${ P_CLIENT_CADIR } " \
-i req -o " ${ CERTNAME } -ec.cert " -f " ${ R_PWFILE } " 2>& 1
CU_ACTION = " Import $CERTNAME 's EC Cert -t u,u,u (ext) "
certu -A -n " ${ CERTNAME } -ec " -t "u,u,u" -d " ${ PROFILEDIR } " \
-f " ${ R_PWFILE } " -i " ${ CERTNAME } -ec.cert " 2>& 1
CU_ACTION = " Import Server EC Root CA -t C,C,C for $CERTNAME (ext.) "
certu -A -n "serverCA-ec" -t "C,C,C" -f " ${ R_PWFILE } " \
-d " ${ PROFILEDIR } " -i " ${ SERVER_CADIR } /serverCA-ec.ca.cert " 2>& 1
#
# done with EC certs
#
#
# Repeat the above for mixed EC certs
#
CU_ACTION = " Generate mixed EC Cert Request for $CERTNAME (ext) "
CU_SUBJECT = " CN= $CERTNAME , E= ${ CERTNAME } -ecmixed@bogus.com, O=BOGUS NSS, L=Mountain View, ST=California, C=US "
certu -R -d " ${ PROFILEDIR } " -k ec -q " ${ EC_CURVE } " -f " ${ R_PWFILE } " \
-z " ${ R_NOISE_FILE } " -o req 2>& 1
CU_ACTION = " Sign ${ CERTNAME } 's mixed EC Request (ext) "
cp ${ CERTDIR } /req ${ CLIENT_CADIR }
certu -C -c "chain-2-clientCA" -m 301 -v 60 -d " ${ P_CLIENT_CADIR } " \
-i req -o " ${ CERTNAME } -ecmixed.cert " -f " ${ R_PWFILE } " 2>& 1
CU_ACTION = " Import $CERTNAME 's mixed EC Cert -t u,u,u (ext) "
certu -A -n " ${ CERTNAME } -ecmixed " -t "u,u,u" -d " ${ PROFILEDIR } " \
-f " ${ R_PWFILE } " -i " ${ CERTNAME } -ecmixed.cert " 2>& 1
# CU_ACTION="Import Server EC Root CA -t C,C,C for $CERTNAME (ext.)"
# certu -A -n "serverCA-ec" -t "C,C,C" -f "${R_PWFILE}" \
# -d "${PROFILEDIR}" -i "${SERVER_CADIR}/serverCA-ec.ca.cert" 2>&1
#
# done with mixed EC certs
#
fi
echo "Importing all the client's own CA chain into the servers DB"
for CA in ` find ${ CLIENT_CADIR } -name "?*.ca.cert" ` ;
do
N = ` basename $CA | sed -e "s/.ca.cert//" `
if [ $N = "clientCA" -o $N = "clientCA-ec" ] ; then
T = "-t T,C,C"
else
T = "-t u,u,u"
fi
CU_ACTION = " Import $N CA $T for $CERTNAME (ext.) "
certu -A -n $N $T -f " ${ R_PWFILE } " -d " ${ PROFILEDIR } " \
-i " ${ CA } " 2>& 1
done
if [ " $CERTFAILED " != 0 ] ; then
cert_log " ERROR: EXT failed $RET "
else
cert_log "SUCCESS: EXT passed"
fi
}
############################## cert_ssl ################################
# local shell function to create client + server certs for SSL test
########################################################################
cert_ssl( )
{
################# Creating Certs for SSL test ###########################
#
CERTFAILED = 0
echo " $SCRIPTNAME : Creating Client CA Issued Certificates =============== "
cert_create_cert ${ CLIENTDIR } "TestUser" 70 ${ D_CLIENT }
echo " $SCRIPTNAME : Creating Server CA Issued Certificate for \\ "
echo " ${ HOSTADDR } ------------------------------------ "
cert_create_cert ${ SERVERDIR } " ${ HOSTADDR } " 100 ${ D_SERVER }
2010-02-07 11:54:28 +00:00
echo " $SCRIPTNAME : Creating Server CA Issued Certificate for \\ "
echo " ${ HOSTADDR } -sni -------------------------------- "
CERTSERIAL = 101
CERTNAME = " ${ HOST } -sni ${ sniCertCount } . ${ DOMSUF } "
cert_add_cert
2008-06-06 12:40:11 +00:00
CU_ACTION = "Modify trust attributes of Root CA -t TC,TC,TC"
certu -M -n "TestCA" -t "TC,TC,TC" -d ${ PROFILEDIR } -f " ${ R_PWFILE } "
if [ -n " $NSS_ENABLE_ECC " ] ; then
CU_ACTION = "Modify trust attributes of EC Root CA -t TC,TC,TC"
certu -M -n "TestCA-ec" -t "TC,TC,TC" -d ${ PROFILEDIR } -f " ${ R_PWFILE } "
fi
# cert_init_cert ${SERVERDIR} "${HOSTADDR}" 1 ${D_SERVER}
# echo "************* Copying CA files to ${SERVERDIR}"
# cp ${CADIR}/*.db .
# hw_acc
# CU_ACTION="Creating ${CERTNAME}'s Server Cert"
# CU_SUBJECT="CN=${CERTNAME}, O=BOGUS Netscape, L=Mountain View, ST=California, C=US"
# certu -S -n "${CERTNAME}" -c "TestCA" -t "Pu,Pu,Pu" -d ${PROFILEDIR} \
# -f "${R_PWFILE}" -z "${R_NOISE_FILE}" -v 60 2>&1
if [ " $CERTFAILED " != 0 ] ; then
cert_log " ERROR: SSL failed $RET "
else
cert_log "SUCCESS: SSL passed"
fi
}
############################## cert_stresscerts ################################
# local shell function to create client certs for SSL stresstest
########################################################################
cert_stresscerts( )
{
############### Creating Certs for SSL stress test #######################
#
CERTDIR = " $CLIENTDIR "
cd " ${ CERTDIR } "
PROFILEDIR = ` cd ${ CERTDIR } ; pwd `
if [ " ${ OS_ARCH } " = "WINNT" -a " $OS_NAME " = "CYGWIN_NT" ] ; then
PROFILEDIR = ` cygpath -m ${ PROFILEDIR } `
fi
if [ -n " ${ MULTIACCESS_DBM } " ] ; then
PROFILEDIR = " multiaccess: ${ D_CLIENT } "
fi
CERTFAILED = 0
echo " $SCRIPTNAME : Creating Client CA Issued Certificates =============== "
CONTINUE = $GLOB_MAX_CERT
CERTSERIAL = 10
while [ $CONTINUE -ge $GLOB_MIN_CERT ]
do
CERTNAME = " TestUser $CONTINUE "
# cert_add_cert ${CLIENTDIR} "TestUser$CONTINUE" $CERTSERIAL
cert_add_cert
CERTSERIAL = ` expr $CERTSERIAL + 1 `
CONTINUE = ` expr $CONTINUE - 1 `
done
if [ " $CERTFAILED " != 0 ] ; then
cert_log " ERROR: StressCert failed $RET "
else
cert_log "SUCCESS: StressCert passed"
fi
}
############################## cert_fips #####################################
# local shell function to create certificates for FIPS tests
##############################################################################
cert_fips( )
{
CERTFAILED = 0
echo " $SCRIPTNAME : Creating FIPS 140 DSA Certificates ============== "
cert_init_cert " ${ FIPSDIR } " "FIPS PUB 140 Test Certificate" 1000 " ${ D_FIPS } "
CU_ACTION = " Initializing ${ CERTNAME } 's Cert DB "
certu -N -d " ${ PROFILEDIR } " -f " ${ R_FIPSPWFILE } " 2>& 1
CU_ACTION = " Loading root cert module to ${ CERTNAME } 's Cert DB (ext.) "
modu -add "RootCerts" -libfile " ${ ROOTCERTSFILE } " -dbdir " ${ PROFILEDIR } " 2>& 1
echo " $SCRIPTNAME : Enable FIPS mode on database ----------------------- "
CU_ACTION = " Enable FIPS mode on database for ${ CERTNAME } "
echo " modutil -dbdir ${ PROFILEDIR } -fips true "
${ BINDIR } /modutil -dbdir ${ PROFILEDIR } -fips true 2>& 1 <<MODSCRIPT
y
MODSCRIPT
RET = $?
if [ " $RET " -ne 0 ] ; then
html_failed " ${ CU_ACTION } ( $RET ) "
cert_log " ERROR: ${ CU_ACTION } failed $RET "
else
html_passed " ${ CU_ACTION } "
fi
CU_ACTION = " Generate Certificate for ${ CERTNAME } "
CU_SUBJECT = " CN= ${ CERTNAME } , E=fips@bogus.com, O=BOGUS NSS, OU=FIPS PUB 140, L=Mountain View, ST=California, C=US "
certu -S -n ${ FIPSCERTNICK } -x -t "Cu,Cu,Cu" -d " ${ PROFILEDIR } " -f " ${ R_FIPSPWFILE } " -k dsa -v 600 -m 500 -z " ${ R_NOISE_FILE } " 2>& 1
if [ " $RET " -eq 0 ] ; then
cert_log "SUCCESS: FIPS passed"
fi
}
############################## cert_eccurves ###########################
# local shell function to create server certs for all EC curves
########################################################################
cert_eccurves( )
{
################# Creating Certs for EC curves test ########################
#
if [ -n " $NSS_ENABLE_ECC " ] ; then
echo " $SCRIPTNAME : Creating Server CA Issued Certificate for "
echo " EC Curves Test Certificates ------------------------------------"
cert_init_cert " ${ ECCURVES_DIR } " "EC Curves Test Certificates" 1 ${ D_ECCURVES }
CU_ACTION = "Initializing EC Curve's Cert DB"
certu -N -d " ${ PROFILEDIR } " -f " ${ R_PWFILE } " 2>& 1
CU_ACTION = "Loading root cert module to EC Curve's Cert DB"
modu -add "RootCerts" -libfile " ${ ROOTCERTSFILE } " -dbdir " ${ PROFILEDIR } " 2>& 1
CU_ACTION = " Import EC Root CA for $CERTNAME "
certu -A -n "TestCA-ec" -t "TC,TC,TC" -f " ${ R_PWFILE } " \
2011-10-07 20:37:26 +00:00
-d " ${ PROFILEDIR } " -i " ${ R_CADIR } /TestCA-ec.ca.cert " 2>& 1
2008-06-06 12:40:11 +00:00
if [ -n " ${ NSS_ECC_MORE_THAN_SUITE_B } " ] ; then
CURVE_LIST = " c2pnb163v1 c2pnb163v2 c2pnb163v3 c2pnb176v1 \
c2pnb208w1 c2pnb272w1 c2pnb304w1 c2pnb368w1 \
c2tnb191v1 c2tnb191v2 c2tnb191v3 c2tnb239v1 \
c2tnb239v2 c2tnb239v3 c2tnb359v1 c2tnb431r1 \
nistb163 nistb233 nistb283 nistb409 nistb571 \
nistk163 nistk233 nistk283 nistk409 nistk571 \
nistp192 nistp224 nistp256 nistp384 nistp521 \
prime192v1 prime192v2 prime192v3 \
prime239v1 prime239v2 prime239v3 \
secp112r1 secp112r2 secp128r1 secp128r2 secp160k1 \
secp160r1 secp160r2 secp192k1 secp192r1 secp224k1 \
secp224r1 secp256k1 secp256r1 secp384r1 secp521r1 \
sect113r1 sect113r2 sect131r1 sect131r2 sect163k1 sect163r1 \
sect163r2 sect193r1 sect193r2 sect233k1 sect233r1 sect239k1 \
sect283k1 sect283r1 sect409k1 sect409r1 sect571k1 sect571r1"
else
CURVE_LIST = "nistp256 nistp384 nistp521"
fi
CERTSERIAL = 2000
for CURVE in ${ CURVE_LIST }
do
CERTFAILED = 0
CERTNAME = " Curve- ${ CURVE } "
CERTSERIAL = ` expr $CERTSERIAL + 1 `
CU_ACTION = " Generate EC Cert Request for $CERTNAME "
CU_SUBJECT = " CN= $CERTNAME , E= ${ CERTNAME } -ec@bogus.com, O=BOGUS NSS, L=Mountain View, ST=California, C=US "
certu -R -k ec -q " ${ CURVE } " -d " ${ PROFILEDIR } " -f " ${ R_PWFILE } " \
-z " ${ R_NOISE_FILE } " -o req 2>& 1
if [ $RET -eq 0 ] ; then
CU_ACTION = " Sign ${ CERTNAME } 's EC Request "
certu -C -c "TestCA-ec" -m " $CERTSERIAL " -v 60 -d " ${ P_R_CADIR } " \
-i req -o " ${ CERTNAME } -ec.cert " -f " ${ R_PWFILE } " " $1 " 2>& 1
fi
if [ $RET -eq 0 ] ; then
CU_ACTION = " Import $CERTNAME 's EC Cert "
certu -A -n " ${ CERTNAME } -ec " -t "u,u,u" -d " ${ PROFILEDIR } " \
-f " ${ R_PWFILE } " -i " ${ CERTNAME } -ec.cert " 2>& 1
fi
done
fi # if NSS_ENABLE_ECC=1
}
2008-08-15 04:12:54 +00:00
########################### cert_extensions_test #############################
# local shell function to test cert extensions generation
##############################################################################
cert_extensions_test( )
2008-06-06 12:40:11 +00:00
{
2008-08-15 04:12:54 +00:00
COUNT = ` expr ${ COUNT } + 1`
CERTNAME = TestExt${ COUNT }
CU_SUBJECT = " CN= ${ CERTNAME } , E= ${ CERTNAME } @bogus.com, O=BOGUS NSS, L=Mountain View, ST=California, C=US "
echo
echo certutil -d ${ CERT_EXTENSIONS_DIR } -S -n ${ CERTNAME } \
-t "u,u,u" -o /tmp/cert -s " ${ CU_SUBJECT } " -x -f ${ R_PWFILE } \
-z " ${ R_NOISE_FILE } " -${ OPT } \< ${ TARG_FILE }
echo "certutil options:"
cat ${ TARG_FILE }
${ BINDIR } /certutil -d ${ CERT_EXTENSIONS_DIR } -S -n ${ CERTNAME } \
-t "u,u,u" -o /tmp/cert -s " ${ CU_SUBJECT } " -x -f ${ R_PWFILE } \
-z " ${ R_NOISE_FILE } " -${ OPT } < ${ TARG_FILE }
RET = $?
if [ " ${ RET } " -ne 0 ] ; then
CERTFAILED = 1
html_failed " ${ TESTNAME } ( ${ COUNT } ) - Create and Add Certificate "
cert_log " ERROR: ${ TESTNAME } - Create and Add Certificate failed "
return 1
fi
echo certutil -d ${ CERT_EXTENSIONS_DIR } -L -n ${ CERTNAME }
EXTLIST = ` ${ BINDIR } /certutil -d ${ CERT_EXTENSIONS_DIR } -L -n ${ CERTNAME } `
RET = $?
echo " ${ EXTLIST } "
if [ " ${ RET } " -ne 0 ] ; then
CERTFAILED = 1
html_failed " ${ TESTNAME } ( ${ COUNT } ) - List Certificate "
cert_log " ERROR: ${ TESTNAME } - List Certificate failed "
return 1
fi
for FL in ` echo ${ FILTERLIST } | tr \| ' ' ` ; do
FL = " `echo ${ FL } | tr _ ' '` "
EXPSTAT = 0
if [ X` echo " ${ FL } " | cut -c 1` = 'X!' ] ; then
EXPSTAT = 1
FL = ` echo ${ FL } | tr -d '!' `
fi
echo " ${ EXTLIST } " | grep " ${ FL } " >/dev/null 2>& 1
RET = $?
if [ " ${ RET } " -ne " ${ EXPSTAT } " ] ; then
CERTFAILED = 1
html_failed " ${ TESTNAME } ( ${ COUNT } ) - Looking for ${ FL } " " returned ${ RET } , expected is ${ EXPSTAT } "
cert_log " ERROR: ${ TESTNAME } - Looking for ${ FL } failed "
return 1
2008-06-06 12:40:11 +00:00
fi
done
2008-08-15 04:12:54 +00:00
html_passed " ${ TESTNAME } ( ${ COUNT } ) "
2008-06-06 12:40:11 +00:00
return 0
}
2008-08-15 04:12:54 +00:00
############################## cert_extensions ###############################
# local shell function to run cert extensions tests
##############################################################################
2008-06-06 12:40:11 +00:00
cert_extensions( )
{
CERTNAME = TestExt
2008-08-15 04:12:54 +00:00
cert_create_cert ${ CERT_EXTENSIONS_DIR } ${ CERTNAME } 90 ${ D_CERT_EXTENSTIONS }
2008-06-06 12:40:11 +00:00
TARG_FILE = ${ CERT_EXTENSIONS_DIR } /test.args
2008-08-15 04:12:54 +00:00
COUNT = 0
while read ARG OPT FILTERLIST; do
if [ X" `echo ${ ARG } | cut -c 1` " = "X#" ] ; then
2008-06-06 12:40:11 +00:00
continue
fi
2008-08-15 04:12:54 +00:00
if [ X" `echo ${ ARG } | cut -c 1` " = "X!" ] ; then
TESTNAME = " ${ FILTERLIST } "
2008-06-06 12:40:11 +00:00
continue
fi
2008-08-15 04:12:54 +00:00
if [ X" ${ ARG } " = "X=" ] ; then
cert_extensions_test
rm -f ${ TARG_FILE }
2008-06-06 12:40:11 +00:00
else
2008-08-15 04:12:54 +00:00
echo ${ ARG } >> ${ TARG_FILE }
2008-06-06 12:40:11 +00:00
fi
done < ${ QADIR } /cert/certext.txt
}
############################## cert_crl_ssl ############################
# local shell function to generate certs and crls for SSL tests
########################################################################
cert_crl_ssl( )
{
################# Creating Certs ###################################
#
CERTFAILED = 0
CERTSERIAL = ${ CRL_GRP_1_BEGIN }
cd $CADIR
PROFILEDIR = ` cd ${ CLIENTDIR } ; pwd `
if [ " ${ OS_ARCH } " = "WINNT" -a " $OS_NAME " = "CYGWIN_NT" ] ; then
PROFILEDIR = ` cygpath -m ${ PROFILEDIR } `
fi
CRL_GRPS_END = ` expr ${ CRL_GRP_1_BEGIN } + ${ TOTAL_CRL_RANGE } - 1`
echo " $SCRIPTNAME : Creating Client CA Issued Certificates Range $CRL_GRP_1_BEGIN - $CRL_GRPS_END === "
CU_ACTION = "Creating client test certs"
while [ $CERTSERIAL -le $CRL_GRPS_END ]
do
CERTNAME = " TestUser $CERTSERIAL "
cert_add_cert
CERTSERIAL = ` expr $CERTSERIAL + 1 `
done
#################### CRL Creation ##############################
CRL_GEN_RES = 0
echo " $SCRIPTNAME : Creating CA CRL ===================================== "
CRL_GRP_END = ` expr ${ CRL_GRP_1_BEGIN } + ${ CRL_GRP_1_RANGE } - 1`
CRL_FILE_GRP_1 = ${ R_SERVERDIR } /root.crl_${ CRL_GRP_1_BEGIN } -${ CRL_GRP_END }
CRL_FILE = ${ CRL_FILE_GRP_1 }
CRLUPDATE = ` date -u "+%Y%m%d%H%M%SZ" `
CU_ACTION = " Generating CRL for range ${ CRL_GRP_1_BEGIN } - ${ CRL_GRP_END } TestCA authority "
CRL_GRP_END_ = ` expr ${ CRL_GRP_END } - 1`
crlu -d $CADIR -G -n "TestCA" -f ${ R_PWFILE } \
-o ${ CRL_FILE_GRP_1 } _or <<EOF_CRLINI
update = $CRLUPDATE
addcert ${ CRL_GRP_1_BEGIN } -${ CRL_GRP_END_ } $CRL_GRP_DATE
addext reasonCode 0 4
addext issuerAltNames 0 "rfc822Name:caemail@ca.com|dnsName:ca.com|directoryName:CN=NSS Test CA,O=BOGUS NSS,L=Mountain View,ST=California,C=US|URI:http://ca.com|ipAddress:192.168.0.1|registerID=reg CA"
EOF_CRLINI
# This extension should be added to the list, but currently nss has bug
#addext authKeyId 0 "CN=NSS Test CA,O=BOGUS NSS,L=Mountain View,ST=California,C=US" 1
CRL_GEN_RES = ` expr $? + $CRL_GEN_RES `
chmod 600 ${ CRL_FILE_GRP_1 } _or
if [ -n " $NSS_ENABLE_ECC " ] ; then
CU_ACTION = " Generating CRL (ECC) for range ${ CRL_GRP_1_BEGIN } - ${ CRL_GRP_END } TestCA-ec authority "
# Until Bug 292285 is resolved, do not encode x400 Addresses. After
# the bug is resolved, reintroduce "x400Address:x400Address" within
# addext issuerAltNames ...
crlu -q -d $CADIR -G -n "TestCA-ec" -f ${ R_PWFILE } \
-o ${ CRL_FILE_GRP_1 } _or-ec <<EOF_CRLINI
update = $CRLUPDATE
addcert ${ CRL_GRP_1_BEGIN } -${ CRL_GRP_END_ } $CRL_GRP_DATE
addext reasonCode 0 4
addext issuerAltNames 0 "rfc822Name:ca-ecemail@ca.com|dnsName:ca-ec.com|directoryName:CN=NSS Test CA (ECC),O=BOGUS NSS,L=Mountain View,ST=California,C=US|URI:http://ca-ec.com|ipAddress:192.168.0.1|registerID=reg CA (ECC)"
EOF_CRLINI
CRL_GEN_RES = ` expr $? + $CRL_GEN_RES `
chmod 600 ${ CRL_FILE_GRP_1 } _or-ec
fi
echo test > file
############################# Modification ##################################
echo " $SCRIPTNAME : Modifying CA CRL by adding one more cert ============ "
sleep 2
CRLUPDATE = ` date -u "+%Y%m%d%H%M%SZ" `
CRL_GRP_DATE = ` date -u "+%Y%m%d%H%M%SZ" `
CU_ACTION = "Modify CRL by adding one more cert"
crlu -d $CADIR -M -n "TestCA" -f ${ R_PWFILE } -o ${ CRL_FILE_GRP_1 } _or1 \
-i ${ CRL_FILE_GRP_1 } _or <<EOF_CRLINI
update = $CRLUPDATE
addcert ${ CRL_GRP_END } $CRL_GRP_DATE
EOF_CRLINI
CRL_GEN_RES = ` expr $? + $CRL_GEN_RES `
chmod 600 ${ CRL_FILE_GRP_1 } _or1
TEMPFILES = " $TEMPFILES ${ CRL_FILE_GRP_1 } _or "
if [ -n " $NSS_ENABLE_ECC " ] ; then
CU_ACTION = "Modify CRL (ECC) by adding one more cert"
crlu -d $CADIR -M -n "TestCA-ec" -f ${ R_PWFILE } \
-o ${ CRL_FILE_GRP_1 } _or1-ec -i ${ CRL_FILE_GRP_1 } _or-ec <<EOF_CRLINI
update = $CRLUPDATE
addcert ${ CRL_GRP_END } $CRL_GRP_DATE
EOF_CRLINI
CRL_GEN_RES = ` expr $? + $CRL_GEN_RES `
chmod 600 ${ CRL_FILE_GRP_1 } _or1-ec
TEMPFILES = " $TEMPFILES ${ CRL_FILE_GRP_1 } _or-ec "
fi
########### Removing one cert ${UNREVOKED_CERT_GRP_1} #######################
echo " $SCRIPTNAME : Modifying CA CRL by removing one cert =============== "
CU_ACTION = "Modify CRL by removing one cert"
sleep 2
CRLUPDATE = ` date -u "+%Y%m%d%H%M%SZ" `
crlu -d $CADIR -M -n "TestCA" -f ${ R_PWFILE } -o ${ CRL_FILE_GRP_1 } \
-i ${ CRL_FILE_GRP_1 } _or1 <<EOF_CRLINI
update = $CRLUPDATE
rmcert ${ UNREVOKED_CERT_GRP_1 }
EOF_CRLINI
chmod 600 ${ CRL_FILE_GRP_1 }
TEMPFILES = " $TEMPFILES ${ CRL_FILE_GRP_1 } _or1 "
if [ -n " $NSS_ENABLE_ECC " ] ; then
CU_ACTION = "Modify CRL (ECC) by removing one cert"
crlu -d $CADIR -M -n "TestCA-ec" -f ${ R_PWFILE } -o ${ CRL_FILE_GRP_1 } -ec \
-i ${ CRL_FILE_GRP_1 } _or1-ec <<EOF_CRLINI
update = $CRLUPDATE
rmcert ${ UNREVOKED_CERT_GRP_1 }
EOF_CRLINI
chmod 600 ${ CRL_FILE_GRP_1 } -ec
TEMPFILES = " $TEMPFILES ${ CRL_FILE_GRP_1 } _or1-ec "
fi
########### Creating second CRL which includes groups 1 and 2 ##############
CRL_GRP_END = ` expr ${ CRL_GRP_2_BEGIN } + ${ CRL_GRP_2_RANGE } - 1`
CRL_FILE_GRP_2 = ${ R_SERVERDIR } /root.crl_${ CRL_GRP_2_BEGIN } -${ CRL_GRP_END }
echo " $SCRIPTNAME : Creating CA CRL for groups 1 and 2 =============== "
sleep 2
CRLUPDATE = ` date -u "+%Y%m%d%H%M%SZ" `
CRL_GRP_DATE = ` date -u "+%Y%m%d%H%M%SZ" `
CU_ACTION = "Creating CRL for groups 1 and 2"
crlu -d $CADIR -M -n "TestCA" -f ${ R_PWFILE } -o ${ CRL_FILE_GRP_2 } \
-i ${ CRL_FILE_GRP_1 } <<EOF_CRLINI
update = $CRLUPDATE
addcert ${ CRL_GRP_2_BEGIN } -${ CRL_GRP_END } $CRL_GRP_DATE
addext invalidityDate 0 $CRLUPDATE
rmcert ${ UNREVOKED_CERT_GRP_2 }
EOF_CRLINI
CRL_GEN_RES = ` expr $? + $CRL_GEN_RES `
chmod 600 ${ CRL_FILE_GRP_2 }
if [ -n " $NSS_ENABLE_ECC " ] ; then
CU_ACTION = "Creating CRL (ECC) for groups 1 and 2"
crlu -d $CADIR -M -n "TestCA-ec" -f ${ R_PWFILE } -o ${ CRL_FILE_GRP_2 } -ec \
-i ${ CRL_FILE_GRP_1 } -ec <<EOF_CRLINI
update = $CRLUPDATE
addcert ${ CRL_GRP_2_BEGIN } -${ CRL_GRP_END } $CRL_GRP_DATE
addext invalidityDate 0 $CRLUPDATE
rmcert ${ UNREVOKED_CERT_GRP_2 }
EOF_CRLINI
CRL_GEN_RES = ` expr $? + $CRL_GEN_RES `
chmod 600 ${ CRL_FILE_GRP_2 } -ec
fi
########### Creating second CRL which includes groups 1, 2 and 3 ##############
CRL_GRP_END = ` expr ${ CRL_GRP_3_BEGIN } + ${ CRL_GRP_3_RANGE } - 1`
CRL_FILE_GRP_3 = ${ R_SERVERDIR } /root.crl_${ CRL_GRP_3_BEGIN } -${ CRL_GRP_END }
echo " $SCRIPTNAME : Creating CA CRL for groups 1, 2 and 3 =============== "
sleep 2
CRLUPDATE = ` date -u "+%Y%m%d%H%M%SZ" `
CRL_GRP_DATE = ` date -u "+%Y%m%d%H%M%SZ" `
CU_ACTION = "Creating CRL for groups 1, 2 and 3"
crlu -d $CADIR -M -n "TestCA" -f ${ R_PWFILE } -o ${ CRL_FILE_GRP_3 } \
-i ${ CRL_FILE_GRP_2 } <<EOF_CRLINI
update = $CRLUPDATE
addcert ${ CRL_GRP_3_BEGIN } -${ CRL_GRP_END } $CRL_GRP_DATE
rmcert ${ UNREVOKED_CERT_GRP_3 }
addext crlNumber 0 2
EOF_CRLINI
CRL_GEN_RES = ` expr $? + $CRL_GEN_RES `
chmod 600 ${ CRL_FILE_GRP_3 }
if [ -n " $NSS_ENABLE_ECC " ] ; then
CU_ACTION = "Creating CRL (ECC) for groups 1, 2 and 3"
crlu -d $CADIR -M -n "TestCA-ec" -f ${ R_PWFILE } -o ${ CRL_FILE_GRP_3 } -ec \
-i ${ CRL_FILE_GRP_2 } -ec <<EOF_CRLINI
update = $CRLUPDATE
addcert ${ CRL_GRP_3_BEGIN } -${ CRL_GRP_END } $CRL_GRP_DATE
rmcert ${ UNREVOKED_CERT_GRP_3 }
addext crlNumber 0 2
EOF_CRLINI
CRL_GEN_RES = ` expr $? + $CRL_GEN_RES `
chmod 600 ${ CRL_FILE_GRP_3 } -ec
fi
############ Importing Server CA Issued CRL for certs of first group #######
echo " $SCRIPTNAME : Importing Server CA Issued CRL for certs ${ CRL_GRP_BEGIN } trough ${ CRL_GRP_END } "
CU_ACTION = "Importing CRL for groups 1"
crlu -D -n TestCA -f " ${ R_PWFILE } " -d " ${ R_SERVERDIR } "
crlu -I -i ${ CRL_FILE } -n "TestCA" -f " ${ R_PWFILE } " -d " ${ R_SERVERDIR } "
CRL_GEN_RES = ` expr $? + $CRL_GEN_RES `
if [ -n " $NSS_ENABLE_ECC " ] ; then
CU_ACTION = "Importing CRL (ECC) for groups 1"
crlu -D -n TestCA-ec -f " ${ R_PWFILE } " -d " ${ R_SERVERDIR } "
crlu -I -i ${ CRL_FILE } -ec -n "TestCA-ec" -f " ${ R_PWFILE } " \
-d " ${ R_SERVERDIR } "
CRL_GEN_RES = ` expr $? + $CRL_GEN_RES `
fi
if [ " $CERTFAILED " != 0 -o " $CRL_GEN_RES " != 0 ] ; then
cert_log " ERROR: SSL CRL prep failed $CERTFAILED : $CRL_GEN_RES "
else
cert_log "SUCCESS: SSL CRL prep passed"
fi
}
#################
# Verify the we can successfully change the password on the database
#
cert_test_password( )
{
CERTFAILED = 0
echo " $SCRIPTNAME : Create A Password Test Cert ============== "
cert_init_cert " ${ DBPASSDIR } " "Password Test Cert" 1000 " ${ D_DBPASSDIR } "
echo " $SCRIPTNAME : Create A Password Test Ca -------- "
ALL_CU_SUBJECT = "CN=NSS Password Test CA, O=BOGUS NSS, L=Mountain View, ST=California, C=US"
cert_CA ${ DBPASSDIR } PasswordCA -x "CTu,CTu,CTu" ${ D_DBPASS } "1"
# now change the password
CU_ACTION = " Changing password on ${ CERTNAME } 's Cert DB "
certu -W -d " ${ PROFILEDIR } " -f " ${ R_PWFILE } " -@ " ${ R_FIPSPWFILE } " 2>& 1
# finally make sure we can use the old key with the new password
CU_ACTION = " Generate Certificate for ${ CERTNAME } with new password "
CU_SUBJECT = " CN= ${ CERTNAME } , E=password@bogus.com, O=BOGUS NSS, L=Mountain View, ST=California, C=US "
certu -S -n PasswordCert -c PasswordCA -t "u,u,u" -d " ${ PROFILEDIR } " -f " ${ R_FIPSPWFILE } " -z " ${ R_NOISE_FILE } " 2>& 1
if [ " $RET " -eq 0 ] ; then
2008-08-15 04:12:54 +00:00
cert_log "SUCCESS: PASSWORD passed"
2008-06-06 12:40:11 +00:00
fi
CU_ACTION = " Verify Certificate for ${ CERTNAME } with new password "
certu -V -n PasswordCert -u S -d " ${ PROFILEDIR } " -f " ${ R_FIPSPWFILE } " 2>& 1
}
2011-10-07 20:37:26 +00:00
###############################
# test if we can distrust a certificate.
#
# we create 3 new certs:
# 1 leaf signed by the trusted root.
# 1 intermediate signed by the trusted root.
# 1 leaf signed by the intermediate.
#
# we mark the first leaf and the intermediate as explicitly untrusted.
# we then try to verify the two leaf certs for our possible usages.
# All verification should fail.
#
cert_test_distrust( )
{
echo " $SCRIPTNAME : Creating Distrusted Certificate "
cert_create_cert ${ DISTRUSTDIR } "Distrusted" 2000 ${ D_DISTRUST }
CU_ACTION = "Mark CERT as unstrusted"
certu -M -n "Distrusted" -t p,p,p -d ${ PROFILEDIR } -f " ${ R_PWFILE } " 2>& 1
echo " $SCRIPTNAME : Creating Distrusted Intermediate "
CERTNAME = "DistrustedCA"
ALL_CU_SUBJECT = " CN= ${ CERTNAME } , E= ${ CERTNAME } @bogus.com, O=BOGUS NSS, L=Mountain View, ST=California, C=US "
cert_CA ${ CADIR } " ${ CERTNAME } " "-c TestCA" ",," ${ D_CA } 2010 2>& 1
CU_ACTION = "Import Distrusted Intermediate"
certu -A -n " ${ CERTNAME } " -t "p,p,p" -f " ${ R_PWFILE } " -d " ${ PROFILEDIR } " \
-i " ${ R_CADIR } /DistrustedCA.ca.cert " 2>& 1
# now create the last leaf signed by our distrusted CA
# since it's not signed by TestCA it requires more steps.
CU_ACTION = "Generate Cert Request for Leaf Chained to Distrusted CA"
CERTNAME = "LeafChainedToDistrustedCA"
CU_SUBJECT = " CN= ${ CERTNAME } , E= ${ CERTNAME } @bogus.com, O=BOGUS NSS, L=Mountain View, ST=California, C=US "
certu -R -d " ${ PROFILEDIR } " -f " ${ R_PWFILE } " -z " ${ R_NOISE_FILE } " -o req 2>& 1
CU_ACTION = " Sign ${ CERTNAME } 's Request "
cp ${ CERTDIR } /req ${ CADIR }
certu -C -c "DistrustedCA" -m 100 -v 60 -d " ${ P_R_CADIR } " \
-i req -o " ${ CERTNAME } .cert " -f " ${ R_PWFILE } " 2>& 1
CU_ACTION = " Import $CERTNAME 's Cert -t u,u,u "
certu -A -n " $CERTNAME " -t "u,u,u" -d " ${ PROFILEDIR } " -f " ${ R_PWFILE } " \
-i " ${ CERTNAME } .cert " 2>& 1
RETEXPECTED = 255
CU_ACTION = " Verify ${ CERTNAME } Cert for SSL Server "
certu -V -n ${ CERTNAME } -u V -d " ${ PROFILEDIR } " -f " ${ R_PWFILE } " 2>& 1
CU_ACTION = " Verify ${ CERTNAME } Cert for SSL Client "
certu -V -n ${ CERTNAME } -u C -d " ${ PROFILEDIR } " -f " ${ R_PWFILE } " 2>& 1
CU_ACTION = " Verify ${ CERTNAME } Cert for Email signer "
certu -V -n ${ CERTNAME } -u S -d " ${ PROFILEDIR } " -f " ${ R_PWFILE } " 2>& 1
CU_ACTION = " Verify ${ CERTNAME } Cert for Email recipient "
certu -V -n ${ CERTNAME } -u R -d " ${ PROFILEDIR } " -f " ${ R_PWFILE } " 2>& 1
CU_ACTION = " Verify ${ CERTNAME } Cert for OCSP responder "
certu -V -n ${ CERTNAME } -u O -d " ${ PROFILEDIR } " -f " ${ R_PWFILE } " 2>& 1
CU_ACTION = " Verify ${ CERTNAME } Cert for Object Signer "
certu -V -n ${ CERTNAME } -u J -d " ${ PROFILEDIR } " -f " ${ R_PWFILE } " 2>& 1
CERTNAME = "Distrusted"
CU_ACTION = " Verify ${ CERTNAME } Cert for SSL Server "
certu -V -n ${ CERTNAME } -u V -d " ${ PROFILEDIR } " -f " ${ R_PWFILE } " 2>& 1
CU_ACTION = " Verify ${ CERTNAME } Cert for SSL Client "
certu -V -n ${ CERTNAME } -u C -d " ${ PROFILEDIR } " -f " ${ R_PWFILE } " 2>& 1
CU_ACTION = " Verify ${ CERTNAME } Cert for Email signer "
certu -V -n ${ CERTNAME } -u S -d " ${ PROFILEDIR } " -f " ${ R_PWFILE } " 2>& 1
CU_ACTION = " Verify ${ CERTNAME } Cert for Email recipient "
certu -V -n ${ CERTNAME } -u R -d " ${ PROFILEDIR } " -f " ${ R_PWFILE } " 2>& 1
CU_ACTION = " Verify ${ CERTNAME } Cert for OCSP responder "
certu -V -n ${ CERTNAME } -u O -d " ${ PROFILEDIR } " -f " ${ R_PWFILE } " 2>& 1
CU_ACTION = " Verify ${ CERTNAME } Cert for Object Signer "
certu -V -n ${ CERTNAME } -u J -d " ${ PROFILEDIR } " -f " ${ R_PWFILE } " 2>& 1
RETEXPECTED = 0
}
2008-06-06 12:40:11 +00:00
############################## cert_cleanup ############################
# local shell function to finish this script (no exit since it might be
# sourced)
########################################################################
cert_cleanup( )
{
cert_log " $SCRIPTNAME : finished $SCRIPTNAME "
html "</TABLE><BR>"
cd ${ QADIR }
. common/cleanup.sh
}
################## main #################################################
cert_init
cert_all_CA
cert_extended_ssl
cert_ssl
cert_smime_client
cert_fips
cert_eccurves
cert_extensions
cert_test_password
2011-10-07 20:37:26 +00:00
cert_test_distrust
2008-06-06 12:40:11 +00:00
if [ -z " $NSS_TEST_DISABLE_CRL " ] ; then
cert_crl_ssl
else
echo " $SCRIPTNAME : Skipping CRL Tests "
fi
if [ -n " $DO_DIST_ST " -a " $DO_DIST_ST " = "TRUE" ] ; then
cert_stresscerts
fi
cert_iopr_setup
cert_cleanup