gecko-dev/editor/base/SplitElementTxn.cpp

227 lines
6.8 KiB
C++
Raw Normal View History

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
#include "SplitElementTxn.h"
#include "nsEditor.h"
#include "nsIDOMNode.h"
#include "nsIDOMSelection.h"
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 17:58:07 +00:00
#include "nsIDOMCharacterData.h"
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 17:58:07 +00:00
#ifdef NS_DEBUG
static PRBool gNoisy = PR_FALSE;
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 17:58:07 +00:00
#else
static const PRBool gNoisy = PR_FALSE;
#endif
// note that aEditor is not refcounted
SplitElementTxn::SplitElementTxn()
: EditTxn()
{
}
NS_IMETHODIMP SplitElementTxn::Init(nsIEditor *aEditor,
nsIDOMNode *aNode,
PRInt32 aOffset)
{
mEditor = do_QueryInterface(aEditor);
mExistingRightNode = do_QueryInterface(aNode);
mOffset = aOffset;
return NS_OK;
}
SplitElementTxn::~SplitElementTxn()
{
}
NS_IMETHODIMP SplitElementTxn::Do(void)
{
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 17:58:07 +00:00
if (gNoisy) { printf("%p Do Split of node %p offset %d\n", this, mExistingRightNode.get(), mOffset); }
NS_ASSERTION(mExistingRightNode, "bad state");
if (!mExistingRightNode) {
return NS_ERROR_NOT_INITIALIZED;
}
// create a new node
nsresult result = mExistingRightNode->CloneNode(PR_FALSE, getter_AddRefs(mNewLeftNode));
NS_ASSERTION(((NS_SUCCEEDED(result)) && (mNewLeftNode)), "could not create element.");
if ((NS_SUCCEEDED(result)) && (mNewLeftNode))
{
if (gNoisy) { printf(" created left node = %p\n", mNewLeftNode.get()); }
// get the parent node
result = mExistingRightNode->GetParentNode(getter_AddRefs(mParent));
// insert the new node
if ((NS_SUCCEEDED(result)) && (mParent))
{
result = nsEditor::SplitNodeImpl(mExistingRightNode, mOffset, mNewLeftNode, mParent);
if (NS_SUCCEEDED(result) && mNewLeftNode)
{
nsCOMPtr<nsIDOMSelection>selection;
mEditor->GetSelection(getter_AddRefs(selection));
if (selection)
{
selection->Collapse(mNewLeftNode, mOffset);
}
}
else {
result = NS_ERROR_NOT_IMPLEMENTED;
}
}
}
return result;
}
NS_IMETHODIMP SplitElementTxn::Undo(void)
{
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 17:58:07 +00:00
if (gNoisy) {
printf("%p Undo Split of existing node %p and new node %p offset %d\n",
this, mExistingRightNode.get(), mNewLeftNode.get(), mOffset);
}
NS_ASSERTION(mExistingRightNode && mNewLeftNode && mParent, "bad state");
if (!mExistingRightNode || !mNewLeftNode || !mParent) {
return NS_ERROR_NOT_INITIALIZED;
}
// this assumes Do inserted the new node in front of the prior existing node
nsresult result;
result = nsEditor::JoinNodesImpl(mExistingRightNode, mNewLeftNode, mParent, PR_FALSE);
if (gNoisy)
{
printf("** after join left child node %p into right node %p\n", mNewLeftNode.get(), mExistingRightNode.get());
if (gNoisy) {mEditor->DebugDumpContent(); } // DEBUG
}
if (NS_SUCCEEDED(result))
{
if (gNoisy) { printf(" left node = %p removed\n", mNewLeftNode.get()); }
nsCOMPtr<nsIDOMSelection>selection;
mEditor->GetSelection(getter_AddRefs(selection));
if (selection)
{
selection->Collapse(mExistingRightNode, mOffset);
}
}
else {
result = NS_ERROR_NOT_IMPLEMENTED;
}
return result;
}
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 17:58:07 +00:00
/* redo cannot simply resplit the right node, because subsequent transactions
* on the redo stack may depend on the left node existing in its previous state.
*/
NS_IMETHODIMP SplitElementTxn::Redo(void)
{
NS_ASSERTION(mExistingRightNode && mNewLeftNode && mParent, "bad state");
if (!mExistingRightNode || !mNewLeftNode || !mParent) {
return NS_ERROR_NOT_INITIALIZED;
}
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 17:58:07 +00:00
if (gNoisy) {
printf("%p Redo Split of existing node %p and new node %p offset %d\n",
this, mExistingRightNode.get(), mNewLeftNode.get(), mOffset);
if (gNoisy) {mEditor->DebugDumpContent(); } // DEBUG
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 17:58:07 +00:00
}
nsresult result;
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 17:58:07 +00:00
nsCOMPtr<nsIDOMNode>resultNode;
// first, massage the existing node so it is in its post-split state
nsCOMPtr<nsIDOMCharacterData>rightNodeAsText;
rightNodeAsText = do_QueryInterface(mExistingRightNode);
if (rightNodeAsText)
{
result = rightNodeAsText->DeleteData(0, mOffset);
if (gNoisy)
{
printf("** after delete of text in right text node %p offset %d\n", rightNodeAsText.get(), mOffset);
if (gNoisy) {mEditor->DebugDumpContent(); } // DEBUG
}
}
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 17:58:07 +00:00
else
{
nsCOMPtr<nsIDOMNode>child;
nsCOMPtr<nsIDOMNode>nextSibling;
result = mExistingRightNode->GetFirstChild(getter_AddRefs(child));
PRInt32 i;
for (i=0; i<mOffset; i++)
{
if (NS_FAILED(result)) {return result;}
if (!child) {return NS_ERROR_NULL_POINTER;}
child->GetNextSibling(getter_AddRefs(nextSibling));
result = mExistingRightNode->RemoveChild(child, getter_AddRefs(resultNode));
if (NS_SUCCEEDED(result))
{
result = mNewLeftNode->AppendChild(child, getter_AddRefs(resultNode));
if (gNoisy)
{
printf("** move child node %p from right node %p to left node %p\n", child.get(), mExistingRightNode.get(), mNewLeftNode.get());
if (gNoisy) {mEditor->DebugDumpContent(); } // DEBUG
}
}
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 17:58:07 +00:00
child = do_QueryInterface(nextSibling);
}
}
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 17:58:07 +00:00
// second, re-insert the left node into the tree
result = mParent->InsertBefore(mNewLeftNode, mExistingRightNode, getter_AddRefs(resultNode));
if (gNoisy)
{
printf("** reinsert left child node %p before right node %p\n", mNewLeftNode.get(), mExistingRightNode.get());
if (gNoisy) {mEditor->DebugDumpContent(); } // DEBUG
}
return result;
}
As a reminder, we decided to do this based strictly content. Some support for style-based text properties is written, but not used anywhere any more. * Cleaned up split and join undo/redo. * Added TypeInState, a data struct that remembers things about text properties for collapsed selections, so you can type * Ctrl-B with an insertion point and the next character will be bold. * Added all the logic to handle inline vs. block elements when setting text properties. * Added some support for italic and underline as well. Adding these things is pretty easy now. Ctrl-B, Ctrl-I, Ctrl-U for testing bold, italic, underline. * Added all the logic to make sure we only add style tags where they're needed, so you should never get the same style tag nested within itself, except as needed for block elements. * Added methods for testing a node to see if a particular style is set. This isn't 100% done yet, but with very little work we could have toolbar buttons that respond to selection changed notification that show the state of bold, italic, underline, etc. in real time. Supports tri-state: whole selection is bold, some of selection is bold, none of selection is bold, ... * Fully undoable and redoable. * Added some debug printfs to transactions and editors. all controlled by a gNoisy static in each module. helps me track down undo/redo problems. if the output bugs people enough, I'll shut it off and re-enable it in my local tree. Noticably missing: make un-bold, make un-italic, etc. This is coming soon.
1999-04-01 17:58:07 +00:00
NS_IMETHODIMP SplitElementTxn::Merge(PRBool *aDidMerge, nsITransaction *aTransaction)
{
if (nsnull!=aDidMerge)
*aDidMerge=PR_FALSE;
return NS_OK;
}
NS_IMETHODIMP SplitElementTxn::Write(nsIOutputStream *aOutputStream)
{
return NS_OK;
}
NS_IMETHODIMP SplitElementTxn::GetUndoString(nsString *aString)
{
if (nsnull!=aString)
{
*aString="Join Element";
}
return NS_OK;
}
NS_IMETHODIMP SplitElementTxn::GetRedoString(nsString *aString)
{
if (nsnull!=aString)
{
*aString="Split Element";
}
return NS_OK;
}
NS_IMETHODIMP SplitElementTxn::GetNewNode(nsIDOMNode **aNewNode)
{
if (!aNewNode)
return NS_ERROR_NULL_POINTER;
if (!mNewLeftNode)
return NS_ERROR_NOT_INITIALIZED;
*aNewNode = mNewLeftNode;
NS_ADDREF(*aNewNode);
return NS_OK;
}