diff --git a/js/tests/config.sh b/js/tests/config.sh
new file mode 100755
index 000000000000..1f76a3e14b1f
--- /dev/null
+++ b/js/tests/config.sh
@@ -0,0 +1,129 @@
+# -*- Mode: Shell-script; tab-width: 4; indent-tabs-mode: nil; -*-
+# 
+# ***** BEGIN LICENSE BLOCK *****
+# Version: MPL 1.1/GPL 2.0/LGPL 2.1
+#
+# The contents of this file are subject to the Mozilla Public License Version
+# 1.1 (the "License"); you may not use this file except in compliance with
+# the License. You may obtain a copy of the License at
+# http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS IS" basis,
+# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+# for the specific language governing rights and limitations under the
+# License.
+# 
+# The Original Code is Mozilla Communicator client code, released
+# March 31, 1998.
+# 
+# The Initial Developer of the Original Code is
+# Netscape Communications Corporation.
+# Portions created by the Initial Developer are Copyright (C) 1998-1999
+# the Initial Developer. All Rights Reserved.
+# 
+# Contributor(s):
+# 
+# Alternatively, the contents of this file may be used under the terms of
+# either of the GNU General Public License Version 2 or later (the "GPL"),
+# or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+# in which case the provisions of the GPL or the LGPL are applicable instead
+# of those above. If you wish to allow use of your version of this file only
+# under the terms of either the GPL or the LGPL, and not to allow others to
+# use your version of this file under the terms of the MPL, indicate your
+# decision by deleting the provisions above and replace them with the notice
+# and other provisions required by the GPL or the LGPL. If you do not delete
+# the provisions above, a recipient may use your version of this file under
+# the terms of any one of the MPL, the GPL or the LGPL.
+# 
+# ***** END LICENSE BLOCK *****
+
+# This file was adapted from mozilla/js/src/config.mk
+
+# Set os+release dependent make variables
+OS_ARCH="`uname -s | sed /\ /s//_/`"
+
+# Attempt to differentiate between SunOS 5.4 and x86 5.4
+OS_CPUARCH=`uname -m`
+
+if [[ "$OS_CPUARCH" == "i86pc" ]]; then
+    OS_RELEASE="`uname -r`_$OS_CPUARCH"
+elif [[ "$OS_ARCH" == "AIX" ]]; then
+    OS_RELEASE="`uname -v`.`uname -r`"
+else
+    OS_RELEASE="`uname -r`"
+fi
+
+if [[ "$OS_ARCH" == "IRIX64" ]]; then
+    OS_ARCH="IRIX"
+fi
+
+# Handle output from win32 unames other than Netscape's version
+if echo "Windows_95 Windows_98 CYGWIN_95-4.0 CYGWIN_98-4.10" | grep -iq "$OS_ARCH"; then
+    OS_ARCH="WIN95"
+fi
+
+if [[ "$OS_ARCH" == "WIN95" ]]; then
+    OS_ARCH="WINNT"
+    OS_RELEASE="4.0"
+fi
+
+if [[ "$OS_ARCH" == "Windows_NT" ]]; then
+    OS_ARCH="WINNT"
+    OS_MINOR_RELEASE="`uname -v`"
+
+    if [[ "$OS_MINOR_RELEASE" == "00" ]]; then
+        OS_MINOR_RELEASE=0
+    fi
+
+    OS_RELEASE="$OS_RELEASE.$OS_MINOR_RELEASE"
+fi
+
+if echo "$OS_ARCH" | grep -iq CYGWIN_NT; then
+    OS_RELEASE="`echo $OS_ARCH|sed 's/CYGWIN_NT-//'`"
+    OS_ARCH="WINNT"
+fi
+
+if [[ "$OS_ARCH" == "CYGWIN32_NT" ]]; then
+    OS_ARCH="WINNT"
+fi
+
+# Virtually all Linux versions are identical.
+# Any distinctions are handled in linux.h
+
+case "$OS_ARCH" in
+    "Linux")
+        OS_CONFIG="Linux_All"
+        ;;
+    "dgux")
+        OS_CONFIG="dgux"
+        ;;
+    "Darwin")
+        OS_CONFIG="Darwin"
+        ;;
+    *)
+        OS_CONFIG="$OS_ARCH$OS_OBJTYPE$OS_RELEASE"
+        ;;
+esac
+
+case "$buildtype" in
+    "opt")
+        OBJDIR_TAG="_OPT"
+        ;;
+    "debug")
+        OBJDIR_TAG="_DBG"
+        ;;
+    *)
+        error "Unknown build type $buildtype"
+esac
+
+
+
+# Name of the binary code directories
+if [[ -z "$OBJDIR_TAG" ]]; then
+    true
+elif [[ -n "$BUILD_IDG" ]]; then
+    JS_OBJDIR="$OS_CONFIG$OBJDIR_TAG.OBJD"
+else
+    JS_OBJDIR="$OS_CONFIG$OBJDIR_TAG.OBJ"
+fi
+
diff --git a/js/tests/test-browser.sh b/js/tests/test-browser.sh
new file mode 100755
index 000000000000..3f13db4d2077
--- /dev/null
+++ b/js/tests/test-browser.sh
@@ -0,0 +1,91 @@
+#!/usr/local/bin/bash
+# -*- Mode: Shell-script; tab-width: 4; indent-tabs-mode: nil; -*-
+
+TEST_DIR=${TEST_DIR:-/work/mozilla/mozilla.com/test.mozilla.com/www}
+TEST_BIN=${TEST_BIN:-$TEST_DIR/bin}
+source ${TEST_BIN}/library.sh
+
+TEST_JSEACH_TIMEOUT=${TEST_JSEACH_TIMEOUT:-240}
+TEST_JSEACH_PAGE_TIMEOUT=${TEST_JSEACH_PAGE_TIMEOUT:-240}
+
+#
+# options processing
+#
+options="p:b:x:N:d:"
+usage()
+{
+    cat <<EOF
+usage: $SCRIPT -p product -b branch -x executablepath -N profilename
+
+variable            description
+===============     ============================================================
+-p product          required. firefox|thunderbird
+-b branch           required. 1.8.0|1.8.1|1.9.0
+-x executablepath   required. directory-tree containing executable 'product'
+-N profilename      required. profile name 
+
+-d datafiles        optional. one or more filenames of files containing 
+                    environment variable definitions to be included.
+
+                    note that the environment variables should have the same 
+                    names as in the "variable" column.
+
+if an argument contains more than one value, it must be quoted.
+EOF
+    exit 2
+}
+
+unset product branch profilename executablepath datafiles
+
+while getopts $options optname ; 
+do 
+    case $optname in
+        p) product=$OPTARG;;
+        b) branch=$OPTARG;;
+        N) profilename=$OPTARG;;
+        x) executablepath=$OPTARG;;
+        d) datafiles=$OPTARG;;
+    esac
+done
+
+# include environment variables
+if [[ -n "$datafiles" ]]; then
+    for datafile in $datafiles; do 
+        source $datafile
+    done
+fi
+
+if [[ -z "$product" || -z "$branch" || -z "$executablepath" || -z "$profilename" ]]; then
+    usage
+fi
+
+make
+
+executable=`get_executable $product $branch $executablepath`
+
+case "$branch" in 
+    1.8.0)
+        list=1.8.0-list.txt
+        ;;
+    1.8.1)
+        list=1.8.1-list.txt
+        ;;
+    1.9.0)
+        list=1.9.0-list.txt
+        ;;
+esac
+
+cat "$list" | while read url; do 
+	edit-talkback.sh -p "$product" -b "$branch" -x "$executablepath" -i "$url"
+	time timed_run $TEST_JSEACH_TIMEOUT "$url" \
+		"$executable" -P "$profilename" \
+		-spider -start -quit \
+		-uri "$url" \
+		-depth 0 -timeout "$TEST_JSEACH_PAGE_TIMEOUT" \
+		-hook "http://$TEST_HTTP/tests/mozilla.org/js/userhookeach.js"; 
+done
+
+
+
+
+
diff --git a/js/tests/test-shell.sh b/js/tests/test-shell.sh
new file mode 100755
index 000000000000..4893a6cda9a9
--- /dev/null
+++ b/js/tests/test-shell.sh
@@ -0,0 +1,80 @@
+#!/usr/local/bin/bash
+# -*- Mode: Shell-script; tab-width: 4; indent-tabs-mode: nil; -*-
+
+TEST_DIR=${TEST_DIR:-/work/mozilla/mozilla.com/test.mozilla.com/www}
+TEST_BIN=${TEST_BIN:-$TEST_DIR/bin}
+source ${TEST_BIN}/library.sh
+
+TEST_JSSHELL_TIMEOUT=${TEST_JSSHELL_TIMEOUT:-240}
+
+#
+# options processing
+#
+options="b:s:T:d:"
+usage()
+{
+    cat <<EOF
+usage: $SCRIPT -b branch -s sourcepath -T buildtype [-d datafiles]
+
+variable            description
+===============     ===========================================================
+-p product          required. js
+-b branch           required. 1.8.0|1.8.1|1.9.0
+-s sourcepath       required. path to js shell source directory mozilla/js/src
+-T buildtype        required. one of opt debug
+-d datafiles        optional. one or more filenames of files containing 
+                    environment variable definitions to be included.
+
+EOF
+    exit 2
+}
+
+while getopts $options optname ; 
+do 
+    case $optname in
+        b) branch=$OPTARG;;
+        s) sourcepath=$OPTARG;;
+        T) buildtype=$OPTARG;;
+        d) datafiles=$OPTARG;;
+    esac
+done
+
+# include environment variables
+if [[ -n "$datafiles" ]]; then
+    for datafile in $datafiles; do 
+        source $datafile
+    done
+fi
+
+if [[ -z "$branch" || -z "$sourcepath" || -z "$buildtype" ]]; then
+    usage
+fi
+
+. config.sh
+
+executable="$sourcepath/$JS_OBJDIR/js$EXE_EXT"
+
+case "$branch" in 
+    1.8.0)
+        included="ecma ecma_2 ecma_3 js1_1 js1_2 js1_3 js1_4 js1_5 js1_6 e4x"
+        ;;
+    1.8.1)
+        included="ecma ecma_2 ecma_3 js1_1 js1_2 js1_3 js1_4 js1_5 js1_6 js1_7 e4x"
+        ;;
+    1.9.0)
+        included="ecma ecma_2 ecma_3 js1_1 js1_2 js1_3 js1_4 js1_5 js1_6 js1_7 js1_8 e4x"
+        ;;
+esac
+
+TEST_HTML_LOG="${TEST_DIR}/results/mozilla.org/js/${TEST_DATE},js,$branch,$buildtype,$OSID,${MACHINE},$TEST_ID-shell.html"
+
+time perl jsDriver.pl \
+    -l $included \
+	-L excluded-n.tests \
+	-s $executable -e sm$buildtype \
+	-o '-S 524288' \
+	-K \
+	-T $TEST_JSSHELL_TIMEOUT \
+	-f $TEST_HTML_LOG \
+    -Q
+
diff --git a/js/tests/test.sh b/js/tests/test.sh
new file mode 100755
index 000000000000..346b4866f7c4
--- /dev/null
+++ b/js/tests/test.sh
@@ -0,0 +1,57 @@
+#!/usr/local/bin/bash
+# -*- Mode: Shell-script; tab-width: 4; indent-tabs-mode: nil; -*-
+
+TEST_DIR=${TEST_DIR:-/work/mozilla/mozilla.com/test.mozilla.com/www}
+TEST_BIN=${TEST_BIN:-$TEST_DIR/bin}
+source ${TEST_BIN}/library.sh
+
+#
+# options processing
+#
+options=":d:"
+usage()
+{
+    cat <<EOF
+usage: $SCRIPT -d datafiles
+
+This script is used to dispatch to either test-browser.sh
+for browser based JavaScript tests or test-shell.js for 
+shell based JavaScript tests. It ignores all input arguments
+except -d datafiles which it uses to pass data to the 
+appropriate script.
+
+variable            description
+===============     ============================================================
+-d datafiles        optional. one or more filenames of files containing 
+                    environment variable definitions to be included.
+if an argument contains more than one value, it must be quoted.
+EOF
+    exit 2
+}
+
+unset datafiles
+
+while getopts $options optname ; 
+do 
+    case $optname in
+        d) datafiles=$OPTARG;;
+    esac
+done
+
+if [[ -z "$datafiles" ]]; then
+    usage
+fi
+
+for data in $datafiles; do
+    source $data
+done
+
+case "$product" in
+    firefox) testscript=./test-browser.sh;;
+    js) testscript=./test-shell.sh;;
+    *) echo "unknown product [$product]"
+        exit 2
+        ;;
+esac
+
+$testscript -d "$datafiles"
\ No newline at end of file