for me on optimized and debug gcc2.96, rh7.1.
- Better failure codes from nsXULPrototypeScript::Deserialize.
- Call nsXULDocument::AbortFastLoads after nsXULPrototypeScript::Serialize
failure, instead of just nulling the FastLoad service's output stream.
- Expose nsXULDocument::AbortFastLoads via nsIXULPrototypeCache, for use from
nsChromeProtocolHandler.cpp. AbortFastLoads flushes the XUL cache now, for
good measure.
- The needless "Current" adjective in nsIFastLoadService attribute and method
names is no more.
- Add a do_GetFastLoadService() helper, to use CID instead of contractid, and
to let the compiler consolidate the static inline CID.
- Add "nglayout.debug.checksum_xul_fastload_file" pref so people can do without
the checksum verification step when reading a FastLoad file.
- Verify the FastLoad file checksum, by default. Also, cache it in the FastLoad
service so we don't recompute it when re-opening the FastLoad file as mailnews
and other top-levels start up. Fill the checksum cache in EndFastLoad, when
the last pseudo-concurrent top-level finishes loading.
My hope to compute the checksum while writing the FastLoad file ran afoul of
misordered writes. The old code to checksum the in-memory nsFastLoadHeader
also was broken on little endian platforms. Now all checksumming is done via
a separate read pass over the complete file, save for the header's checksum
field, which is summed as if it contained zero.
- Track and check FastLoad file dependencies. This required groveling with a
bunch of Necko interfaces in nsChromeProtocolHandler::NewChannel -- read it
and weep. Dependency checking, as well as checksum access and computation,
use better-factored nsIFastLoad{File,Read,Write}Control interfaces.
- nsBufferedStream::Seek wasn't flushing the buffer when seeking backward
within the buffer, but it must, because mCursor bounds the amount to write
if the buffer contains the end of file.
- Add an unbufferedStream readonly attribute to nsIStreamBufferAccess, so we
don't have to screw around with the bufferying layer when checksumming. Also
implement nsIStreamBufferAccess in nsBufferedOutputStream.
- nsISeekableOutputStream was bogus, based on a bad state I had put the
nsBufferedOutputStream code in on its way from being completely broken when
you seek backwards outside of the buffer. Removing this interface required
using nsIFastLoadFileIO in nsFastLoadFileWriter, and it also required careful
ordering of Close calls (the Reader must close after the Writer or Updater,
so that the Reader's underlying, unbuffered input stream can be read by
nsFastLoadFileWriter::Close to compute the checksum.
- Miscellaneous tab/indentation, comment typo, bracing, if( => if ( style,
nsnull vs. 0, useless variable elimination, tortured control flow,
AutoString instead of String, and gratuitous ; after nsISupportsUtils.h
macro call cleanups.
- Call nsXULDocument::AbortFastLoads after nsXULPrototypeScript::Serialize
failure, instead of just nulling the FastLoad service's output stream.
- Expose nsXULDocument::AbortFastLoads via nsIXULPrototypeCache, for use from
nsChromeProtocolHandler.cpp. AbortFastLoads flushes the XUL cache now, for
good measure.
- The needless "Current" adjective in nsIFastLoadService attribute and method
names is no more.
- Add a do_GetFastLoadService() helper, to use CID instead of contractid, and
to let the compiler consolidate the static inline CID.
- Add "nglayout.debug.checksum_xul_fastload_file" pref so people can do without
the checksum verification step when reading a FastLoad file.
- Verify the FastLoad file checksum, by default. Also, cache it in the FastLoad
service so we don't recompute it when re-opening the FastLoad file as mailnews
and other top-levels start up. Fill the checksum cache in EndFastLoad, when
the last pseudo-concurrent top-level finishes loading.
My hope to compute the checksum while writing the FastLoad file ran afoul of
misordered writes. The old code to checksum the in-memory nsFastLoadHeader
also was broken on little endian platforms. Now all checksumming is done via
a separate read pass over the complete file, save for the header's checksum
field, which is summed as if it contained zero.
- Track and check FastLoad file dependencies. This required groveling with a
bunch of Necko interfaces in nsChromeProtocolHandler::NewChannel -- read it
and weep. Dependency checking, as well as checksum access and computation,
use better-factored nsIFastLoad{File,Read,Write}Control interfaces.
- nsBufferedStream::Seek wasn't flushing the buffer when seeking backward
within the buffer, but it must, because mCursor bounds the amount to write
if the buffer contains the end of file.
- Add an unbufferedStream readonly attribute to nsIStreamBufferAccess, so we
don't have to screw around with the bufferying layer when checksumming. Also
implement nsIStreamBufferAccess in nsBufferedOutputStream.
- nsISeekableOutputStream was bogus, based on a bad state I had put the
nsBufferedOutputStream code in on its way from being completely broken when
you seek backwards outside of the buffer. Removing this interface required
using nsIFastLoadFileIO in nsFastLoadFileWriter, and it also required careful
ordering of Close calls (the Writer or Updater must close after the Reader,
so that the Reader's underlying, unbuffered input stream can be read by
nsFastLoadFileWriter::Close to compute the checksum.
- Miscellaneous tab/indentation, comment typo, bracing, if( => if ( style,
nsnull vs. 0, useless variable elimination, tortured control flow,
AutoString instead of String, and gratuitous ; after nsISupportsUtils.h
macro call cleanups.
Changes allow us to have a finer control over which parts of the tree are built with PIC. Part of the static build branch landing.
Bug #46775 r=mcafee a=leaf
Revising nsIChannel to allow for overlapped i/o. This consists of three parts:
1. Factoring nsIChannel into a protocol specific part, the nsIChannel, and a socket specific, the nsITransport.
2. Derive the nsIChannel from a nsIRequest.
2. Changes the notification system from necko and the URILoader to pass the nsIRequest interface instead of nsIChannel interface.
This goal stems from wanting to be able to have active AsyncRead and AsyncWrite operations on nsSocketTransport.
This is desired because it would greatly simplify the task of maintaining persistent/reusable socket connections
for FTP, HTTP, and Imap (and potentially other protocols). The problem with the existing nsIChannel interface is
that it does not allow one to selectively suspend just one of the read or write operations while keeping the other active.
r=darin@netscape.comsr=rpotts@netscape.com
1. Factoring nsIChannel into a protocol specific part, the nsIChannel, and a socket specific, the nsITransport.
2. Derive the nsIChannel from a nsIRequest.
2. Changes the notification system from necko and the URILoader to pass the nsIRequest interface instead of nsIChannel interface.
This goal stems from wanting to be able to have active AsyncRead and AsyncWrite operations on nsSocketTransport.
This is desired because it would greatly simplify the task of maintaining persistent/reusable socket connections
for FTP, HTTP, and Imap (and potentially other protocols). The problem with the existing nsIChannel interface is
that it does not allow one to selectively suspend just one of the read or write operations while keeping the other active.
The full details of the change on written up in the netlib newsgroup.
r=darin@netscape.comsr=rpotts@netscape.com
Windows and Mac, and fix a couple nsSpecialSystemDirectory bugs.
All the changes are BeOS specific (i.e. wrapped in XP_BEOS or
only used by code wrapped in XP_BEOS).
r=mcafee
in so many different directories, that I think it's the best way.
I've pulled and clobber_all'd my tree and got
r=dp
on this checkin.
Here are the touched files:
M mozilla/embedding/browser/activex/src/control/MozillaBrowser.cpp
M mozilla/embedding/browser/activex/src/control/MozillaBrowser.h
M mozilla/js/src/xpconnect/shell/xpcshell.cpp
M mozilla/netwerk/protocol/res/src/nsResProtocolHandler.cpp
M mozilla/xpcom/build/nsXPComInit.cpp
M mozilla/xpcom/components/nsComponentManager.cpp
M mozilla/xpcom/components/nsIServiceManager.h
M mozilla/xpcom/components/nsServiceManager.cpp
M mozilla/xpcom/io/nsSpecialSystemDirectory.cpp
M mozilla/xpcom/io/nsSpecialSystemDirectory.h
M mozilla/xpcom/tests/TestBuffers.cpp
M mozilla/xpcom/tests/TestPipes.cpp
M mozilla/xpcom/tests/TestShutdown.cpp
M mozilla/xpcom/tests/windows/TestHelloXPLoop.cpp
M mozilla/xpcom/tools/registry/regExport.cpp
M mozilla/xpcom/tools/registry/regxpcom.cpp
M mozilla/xpinstall/stub/xpistub.cpp
M mozilla/webshell/embed/ActiveX/MozillaBrowser.cpp
M mozilla/webshell/embed/ActiveX/MozillaBrowser.h
M mozilla/webshell/tests/viewer/nsMacMain.cpp
M mozilla/webshell/tests/viewer/nsPhMain.cpp
M mozilla/webshell/tests/viewer/nsWinMain.cpp
M mozilla/webshell/tests/viewer/unix/gtk/nsGtkMain.cpp
M mozilla/xpfe/appshell/src/nsFileLocations.cpp
M mozilla/xpfe/bootstrap/nsAppRunner.cpp
The heart of this checkin is a change in the signature and symantics
of NS_InitXPCOM.
The new signature is
extern NS_COM nsresult
NS_InitXPCOM(nsIServiceManager* *result, nsFileSpec* binDirectory);
I filed a bug for this problem:
b=23157
The original manifestation of this bug was in mozilla/netwerk/protocol/res/src/nsResProtocolHandler.cpp It used the current process directory to find resources, which is not correct when the current process is not mozilla.exe.
I have added a new type to nsSpecialSystemDirectory, Moz_BinDirectory, and made nsResProtocolHandler use that value.
