SelectionState doesn't save and restore current selection's direction. So the
direction of selection is always default after undoing.
So we should restore direction of selection.
Differential Revision: https://phabricator.services.mozilla.com/D2259
--HG--
extra : moz-landing-system : lando
To reduce QI, I would like to replace nsIDOMNode with nsINode. And some
parameters in *DataTransder.cpp's methods is unused (it uses as nullptr),
so we should remove these parameters.
Also nsIDOMNodeList is unused now, so we should remove this including.
MozReview-Commit-ID: 1QTIkxDazjJ
--HG--
extra : rebase_source : 3961e897fcaa96975facc822821f1e223cab358d
A lot of methods take |const EditorRawDOMPoint&| as their argument. However,
some of them are called with EditorDOMPoint::AsRaw(). This is not good for
performance because:
1. Needs to create temporary instance of EditorRawDOMPoint.
2. EditorRawDOMPoint::AsRaw() may be used by simple mistake.
3. Such methods may call EditorRawDOMPoint::Offset(), however, it's not copied
to the original EditorDOMPoint instance. So, callers may need to compute
offset again.
So, such methods should be changed to template methods if they are not virtual
method and AsRaw() should be gotten rid of for prevent it looking not expensive.
MozReview-Commit-ID: DAqqW4a2EMS
--HG--
extra : rebase_source : 120b920477fe6e7231271411a00994325acdb842
This crashtest case hits assertion in SelAdjInsertNode due to invalid offset
point. So we check whether this is valid.
Also, SelAdjCreateNode and SelAdjInsertNode should use EditorRawDOMPoint to avoid offset calculation and check valid offset.
MozReview-Commit-ID: A1kaKEzc36e
--HG--
extra : rebase_source : c46843fdd6e9e18f49b9cedb008cda6cf3436811
EditorDOMPointBase::Container() may return nullptr. So, it should be renamed
to GetContainer().
Then, the method name becomes longer and a lot of callers access the result
directly. So, there should be following methods to make the callers shorter:
- GetContainerAsContent() to return the container as nsIContent*.
- GetContainerAsElement() to return the container as dom::Element*.
- GetContainerAsText() to return the container as dom::Text.
- GetContainerAsDOMNode() to return the container as nsIDOMNode*.
- CanContainerHaveChildren() to check if the container can have child nodes.
- IsInDataNode() to check if the point is in a data node including text node.
- IsInTextNode() to check if the point is in a text node.
- IsContainerHTMLElement() to check if the container is specific HTML element.
- IsContainerAnyOfHTMLElements() to check if the container is one of the
specified HTML elements.
MozReview-Commit-ID: LkN2WBbCPj0
--HG--
extra : rebase_source : 9da1e70d4c74f7ad573e244cf6c7b21a0c7b4410
EditorBase::CreateTxnForSplitNode() and EditorBase::SplitNode() takes a set of
container and offset in it for specifying a point to split.
Instead, they should take EditorRawDOMPoint for specifying start of right node.
MozReview-Commit-ID: 5VwS8oudzIT
--HG--
extra : rebase_source : 727948e5cf95f0713019f57ae9a007b85569fa56
EditorUtils::IsDescendantOf() current takes a pointer to offset or a pointer to
child content if the caller needs to know the child of the most ancestor node.
However, some callers should get a child as EditorDOMPoint or EditorRawDOMPoint.
Then, they can be used for some editor methods which need to take child node
for performance optimization.
This patch makes EditorUtils::IsDescendantOf() as only two overloads. One takes
pointer to EditorRawDOMPoint as optional out argument. The other takes pointer
to EditorDOMPoint as an out param.
Additionally, this creates new constructor of AutoTrackDOMPoint for making it
can treat EditorDOMPoint directly.
MozReview-Commit-ID: IsAGTUvKI19
--HG--
extra : rebase_source : 97469a21b974c6a1dd515ab472bbc4a88c1899c8
Web standards use "Container" instead of "Parent". So, nsRange shouldn't use "Parent" for its members and methods.
MozReview-Commit-ID: Ho6N0diuWtE
--HG--
extra : rebase_source : ee4eb7068a68b118c7fe98e9e9e7fa9c9e7f13e2
Since RangeUpdater::SelAdj* method of nsIDOM* version requires additional QI and we don't use nsIDOM* as parameter, it is unnecessary to keep it.
MozReview-Commit-ID: 4XyYBG6Qrhl
--HG--
extra : rebase_source : 5fd830a2ffeff944471f026ded704a46ac4dd3d5
nsRange::DoSetRange() adds/remove its root to/from mutation observer, initializes common ancestor, registers itself to the common ancestor, unregisters itself from old common ancestor, and notifies selection listeners of selection change.
However, those runtime cost is expensive but on the other hand, a lot of callers set both start and end of the range and that causes calling DoSetRange() twice.
This patch renames Set() to SetStartAndEnd() for easier to understand the meaning and make it call DoSetRange() only once.
MozReview-Commit-ID: FRV55tuBAgg
--HG--
extra : rebase_source : 67adf929cf119e2425f7d3741651217522094590
For conforming to our coding rules, |result| of nsresult variants should be renamed to |rv|.
MozReview-Commit-ID: Bk8CyLAnvXQ
--HG--
extra : rebase_source : dd3dc34a032f22abf3fd7f85556b47ffbeec55b2
Currently, editor code uses following style (or similar style) in a lot of places:
if (foo)
{
}
else
{
}
This patch fixes this as conforming to our coding rules, i.e., it becomes:
if (foo) {
} else {
}
Additionally, this fixes other odd control statements in the files which include above issue because it's difficult to find following issues with searching the files:
* if (foo) bar;
* if (foo) { bar; }
* if (foo)
bar;
Finally, if it becomes much simpler than current code, this patch rewrites existing code with "early return style". But this case is only a few places because this is risky.
MozReview-Commit-ID: 2Gs26goWXrF
--HG--
extra : rebase_source : 603f9003a3566b3203bdeb27dc73ac33502d2853
In our coding rules, variable names of nsresult should be rv. Indeed, when you see |rv| in the code, you must assume that its type if nsresult.
However, a lot of code under editor/ uses |res| for the variables of nsresult. Let's replace |res| with |rv|.
And this patch improves following points:
1. When |rv| is set in both |if| and |else| block and they are check outside of them, this moves the check into each |if| and |else| block because even if the failure is notified with warning, you cannot see which case was performed and failed. This change makes it clear.
2. When |return rv;| returns non-error code because |rv| is checked with NS_ENSURE_SUCCESS() immediately before, setting replacing it with |return NS_OK;| is clearer.
3. Move declaration of |nsresult rv| into smaller scope as far as possible. This prevents setting rv to unexpected value and easier to check its value at reading the code.
MozReview-Commit-ID: 9MAqj7sFey3
--HG--
extra : rebase_source : 0fd316b851ea616b3a95d8c1afc111ff55e11993
This patch also renames:
EditorInputEventDispatcher -> mozilla::EditorInputEventDispatcher
And some variable names are renamed from aEditor or mEditor to aEditorBase or mEditorBase for making their types clearer.
MozReview-Commit-ID: 2FCXWpLMn8e
--HG--
rename : editor/libeditor/nsEditor.cpp => editor/libeditor/EditorBase.cpp
rename : editor/libeditor/nsEditor.h => editor/libeditor/EditorBase.h
Note that this fixes some new bustage of nsHTMLEditor.
nbsp is conflict with nsWSRunObject.cpp's same name constant. Therefore, I moved it into nsHTMLEditor and rename it to kNBSP.
And including some missing header files.
MozReview-Commit-ID: hwL8BIbSMQ
--HG--
rename : editor/libeditor/nsSelectionState.cpp => editor/libeditor/SelectionState.cpp
rename : editor/libeditor/nsSelectionState.h => editor/libeditor/SelectionState.h
