As of Python 3, decimal notations of octal values for permission modes
are no longer permitted and will result in a `SyntaxError` exception
(`invalid token`).
Using the proper octal notation which is also Python 2.7 compatible will
fix this issue.
--HG--
extra : rebase_source : 2e897c51f04ad0ee69071f84b98df224f3af72d3
Now that we compile with cargo, we don't have fine-grained control over
the build flags used via environment variables detected in configure or
set in config.mk. We should just remove that dead code so nobody trips
over it.
This patch is really two separate changes.
The first change is that rust crates are large, standalone entities that
may contain multitudes of source files. It therefore doesn't make sense
to keep them in SOURCES, as we have been doing. Moving to use cargo
will require a higher-level approach, which suggests that we need a
different, higher-level representation for Rust sources in the build
system.
The representation here is to have the build system refer to things
defined in Cargo.toml files as the entities dealt with in the build
system, and let Cargo deal with the details of actually building things.
This approach means that adding a new crate to an existing library just
requires editing Rust and Cargo.toml files, rather than dealing with
moz.build, which seems more natural to Rust programmers. By having the
source files for libraries (and binaries in subsequent iterations of
this support) checked in to the tree, we can also take advantage of
Cargo.lock files.
The second is that we switch the core build system over to building via
cargo, rather than invoking rustc directly.
We also clean up a number of leftover things from the Old Way of doing
things. A number of tests are added to confirm that we'll only permit
crates to be built that have dependencies in-tree.
Through an oversight, we listed librul.a twice when linking libxul: once
as part of the "objects" we were linking, and once as a static library.
This duplication is unnecessary and would cause problems later when we
try to generate librul.a via cargo, as cargo will put it someplace
different from where we expect and the two names will conflict. Let's
have rules.mk be the single source of truth for how librul.a is named,
and then the code to link libxul can simply refer to that name.
The only use of this variable is to override NSINSTALL, and its value is
the same as NSINSTALL_PY.
While here, remove the outdated NSINSTALL_NATIVECMD that was used for
pymake.
--HG--
extra : rebase_source : b871fbb409836a17cb8d71cd1e5ddc9d5ad3f49f
as opposed to passing down LINK when cross compiling.
Until bug 1290334, LINK was the variable used by the NSS build system
for the linker on Windows, but it now uses LD, like on other platforms.
But its default value on Windows is "link", which can pick /usr/bin/link
on msys2, instead of MSVC's so, pass down LD from the Gecko build
system. And do so an all platforms in all cases, because it shouldn't
hurt.
--HG--
extra : rebase_source : 3eb8236a8f032468d10c874be2daa1c66986bd47
This patch is really two separate changes.
The first change is that rust crates are large, standalone entities that
may contain multitudes of source files. It therefore doesn't make sense
to keep them in SOURCES, as we have been doing. Moving to use cargo
will require a higher-level approach, which suggests that we need a
different, higher-level representation for Rust sources in the build
system.
The representation here is to have the build system refer to things
defined in Cargo.toml files as the entities dealt with in the build
system, and let Cargo deal with the details of actually building things.
This approach means that adding a new crate to an existing library just
requires editing Rust and Cargo.toml files, rather than dealing with
moz.build, which seems more natural to Rust programmers. By having the
source files for libraries (and binaries in subsequent iterations of
this support) checked in to the tree, we can also take advantage of
Cargo.lock files.
The second is that we switch the core build system over to building via
cargo, rather than invoking rustc directly.
We also clean up a number of leftover things from the Old Way of doing
things. A number of tests are added to confirm that we'll only permit
crates to be built that have dependencies in-tree.
Through an oversight, we listed librul.a twice when linking libxul: once
as part of the "objects" we were linking, and once as a static library.
This duplication is unnecessary and would cause problems later when we
try to generate librul.a via cargo, as cargo will put it someplace
different from where we expect and the two names will conflict. Let's
have rules.mk be the single source of truth for how librul.a is named,
and then the code to link libxul can simply refer to that name.
Configure uses the value of the MT environment variable before falling back
to mt(.exe), but the build system was completely ignoring the MT
environment variable.
--HG--
extra : rebase_source : 8c9b43aeb08493ae5bd6d6361f4f18f097ea0553
Gpsd is the GPS daemon on Linux. It implements support for a wide range
of GPS receivers. This patch adds support for gpsd to the Geolocation
module.
The build system can now test for libgps, which provides the public
interface to gpsd's functionality. If found, |GpsdLocationProvider|
is added to the build.
MozReview-Commit-ID: 1kBgFdEZePI
This removes the unnecessary setting of c-basic-offset from all
python-mode files.
This was automatically generated using
perl -pi -e 's/; *c-basic-offset: *[0-9]+//'
... on the affected files.
The bulk of these files are moz.build files but there a few others as
well.
MozReview-Commit-ID: 2pPf3DEiZqx
--HG--
extra : rebase_source : 0a7dcac80b924174a2c429b093791148ea6ac204
B2g came with its own version of 'libgabi++' in its toolchain. Gecko
on b2g isn't build any longer with this toolchain. With this patch
applied, Gecko's internal version of 'libgabi++' is used for building.
MozReview-Commit-ID: KU4OBYQ6cAW
Per froydnj in bug 1186064 comment #23, "it makes sense to proceed with removing
MSVC 2013 support." This commit does that.
We also go a step further and require VS2015 Update 2 instead of just
update 1. This temporarily brings us down to just 1 officially supported
Visual Studio version. However, VS2015u3 was just released and is
unofficially supported.
Since MOZ_CRT is no longer set, references to it have been removed.
MozReview-Commit-ID: 8MUR6qLzQA5
--HG--
extra : rebase_source : 8f5061080a3d56dd484f9be03649fb65f0145f67
Per froydnj in bug 1186064 comment #23, "it makes sense to proceed with removing
MSVC 2013 support." This commit does that.
We also go a step further and require VS2015 Update 2 instead of just
update 1. This temporarily brings us down to just 1 officially supported
Visual Studio version. However, VS2015u3 was just released and is
unofficially supported.
Since MOZ_CRT is no longer set, references to it have been removed.
MozReview-Commit-ID: 8MUR6qLzQA5
--HG--
extra : rebase_source : 22ab4f47661ead4995d0c5261104abfb02b82aa2
Previously this implementation would use the expected names of the built-in
module and slot to get a handle on them. This doesn't work on distributions that
use other names. The new implementation searches through the slots from the
default module list for one where PK11_HasRootCerts returns true (which
indicates that NSS considers that slot to contain the default built-in root
list).
MozReview-Commit-ID: LmX27hQfFJU
--HG--
extra : rebase_source : 50383dcc77257fe08ce2c7d908e95cda7c4bbe9d
This also fixes the issue of processing the artifacts twice in some
situations (bug 1275673). Note that the artifact download no longer
happens when a specific target is passed to 'mach build'.
MozReview-Commit-ID: Ktys6u3r1kG
Historically, a mozinfo for js standalone build has not been necessary,
but with the move towards a) having things work with mach and b)
buildconfig using the MozbuildObject.from_environment in next patch,
mozinfo becomes necessary (it's required for
MozbuildObject.from_environment to find the directory is an objdir).
Interestingly, hazard builds do both a js standalone build and a desktop
Firefox build at the same time, both of which are done with MOZCONFIG
set in the environment... with the Firefox mozconfig. The result of now
writing a mozinfo for js standalone builds is that in that case, they
end up with a reference to the mozconfig, which the build system then
reads, and finds a MOZ_OBJDIR, which then doesn't match the js
standalone build objdir. So for those builds, reset MOZCONFIG.
