For detecting regressions, SetDocumentTitleTransaction::SetDomTitle() should be tested.
The transaction is created only when nsIHTMLEditor::setDocumentTitle(). Therefore, it needs to be a chrome mochitest.
MozReview-Commit-ID: 4UjAJ8zNPBP
In our coding rules, variable names of nsresult should be rv. Indeed, when you see |rv| in the code, you must assume that its type if nsresult.
However, a lot of code under editor/ uses |res| for the variables of nsresult. Let's replace |res| with |rv|.
And this patch improves following points:
1. When |rv| is set in both |if| and |else| block and they are check outside of them, this moves the check into each |if| and |else| block because even if the failure is notified with warning, you cannot see which case was performed and failed. This change makes it clear.
2. When |return rv;| returns non-error code because |rv| is checked with NS_ENSURE_SUCCESS() immediately before, setting replacing it with |return NS_OK;| is clearer.
3. Move declaration of |nsresult rv| into smaller scope as far as possible. This prevents setting rv to unexpected value and easier to check its value at reading the code.
MozReview-Commit-ID: 9MAqj7sFey3
--HG--
extra : rebase_source : 0fd316b851ea616b3a95d8c1afc111ff55e11993
NS_FOUND_TARGET is now declared as an error code. However, making it as a success code makes the code simpler.
First, this patch renames it to NS_SUCCESS_EDITOR_FOUND_TARGET because it's usual naming rule (according to the other declarations).
Next, FindTargetNode() should return it when a nest call of itself returns NS_SUCCESS_EDITOR_FOUND_TARGET as it does now.
Finally, removing the code overwriting NS_FOUND_TARGET with NS_OK from HTMLEditor::CreateDOMFragmentFromPaste() since it doesn't cause hitting NS_ENSURE_SUCCESS() and the variable, rv, will be overwritten with other method's result.
MozReview-Commit-ID: 6GgZptrXXQa
--HG--
extra : rebase_source : 79418fc83fb087e559221f895c59c7c334980456
When typing character, current selection node might be anonymous DIV, not text node. So even if plain text, we might not get it.
We should get text node correctly when using plain text editor.
MozReview-Commit-ID: LmfYa7BqZnC
--HG--
extra : rebase_source : d08c74c8cc5fdec4d19772f112e54a08b95afeb3
When pasting large image, it may cause OOM when generating base64 data. So we should use fallible allocator instead.
Also, base64 is ASCII, so we should use AppendASCIItoUTF16 instead of AppendUTF8toUTF16.
MozReview-Commit-ID: 8yWPxfEcEwv
--HG--
extra : rebase_source : 6c2c3144d4413017b4861443c945aeb0d6d995ef
We can assume that if middle button's click event on a link isn't consumed by any event handlers including system event group's, it will cause open new tab. With this assumption, we can avoid using setTimeout which causes random orange.
However, unfortunately, in e10s mode, the default is NOT consumed at window in bubbling phase but consumed at that time. So, when not working the link is expected, we cannot check Event.defaultPrevented. But fortunately, we can check if the page is loaded after that.
Note that for testing this, the test needs to check if an event handler which is either in default group or system group consumed a click event. However, this runs as mochitest-plain. Therefore, Event.defaultPrevented returns false if the event is consumed only in the system group's event listener. For avoiding this issue, this patch adds defaultPreventedInAnyGroups() into SpecialPowers. In SpecialPowers, Event.defaultPrevented is accessed from chrome context. Therefore, we can get the result what this test needs.
MozReview-Commit-ID: Cfn4lFR1dfI
--HG--
extra : rebase_source : 51feb768bd38f62cc19c2f4aecaaea0135190599
The new name makes the sense of the condition much clearer. E.g. compare:
NS_WARN_IF_FALSE(!rv.Failed());
with:
NS_WARNING_ASSERTION(!rv.Failed());
The new name also makes it clearer that it only has effect in debug builds,
because that's standard for assertions.
--HG--
extra : rebase_source : 886e57a9e433e0cb6ed635cc075b34b7ebf81853
The main renaming was generated with the following python script:
```
import sys
import re
CAMEL_CASE_REGEX = re.compile(r"(^|_|-)([A-Z])([A-Z]+)")
DISPLAY_REGEX = re.compile(r"\bNS_STYLE_DISPLAY_([^M][A-Z_]+)\b")
def to_camel_case(ident):
return re.sub(CAMEL_CASE_REGEX,
lambda m: m.group(2) + m.group(3).lower(), ident)
def constant_to_enum(constant):
return "StyleDisplay::" + to_camel_case(constant) + ("_" if constant == "NONE" else "")
def process_line(line):
return re.sub(DISPLAY_REGEX,
lambda m: constant_to_enum(m.group(1)), line)
lines = []
with open(sys.argv[1], "r") as f:
for line in f:
lines.append(process_line(line))
with open(sys.argv[1], "w") as f:
for line in lines:
f.write(line)
```
And the following shell commands:
```
find . -name '*.cpp' -exec python display.py {} \;
find . -name '*.h' -exec python display.py {} \;
```
MozReview-Commit-ID: 91xYCbLC2Vf
They are non-standard aliases for "DragEvent" and "KeyboardEvent" that
are not supported by any other UA, and we would like to drop support.
So first let's stop using them ourselves, so we can use telemetry to see
if any sites are using them.
MozReview-Commit-ID: ICC33ORa2st
CompositionTransaction::SetIMESelection() is also called when user redos the committed composition. In such case, it doesn't have ranges, but DoTransaction() tries to restore selection ranges with no ranges. That causes hiding caret because when there is no caret range in the ranges, SetIMESelection() hides the caret as IME requested.
So, for redo, SetIMESelection() shouldn't hide caret when there are no ranges (i.e., the composition was already committed).
Previously we supported insertParagraph as a synonym for formatBlock
"p", which is both useless and incompatible with all other browsers.
Edge's behavior doesn't look useful and looks redundant with insertHTML
(although it matches the name nicely, probably because they invented
the command). Blink/WebKit treat it the same as hitting Enter, which is
useful for cross-browser testing until we get synthesizeKey() in wpt.
At the same time, I added insertLineBreak, which Blink/WebKit support
with the same functionality as pressing Shift-Enter.
The new event.html failures are spurious -- we used to pass by mistake
because we didn't support insertlinebreak at all. insertlinebreak.html
has only new passes, no new failures, although it's not clear on the
diff.
MozReview-Commit-ID: 16oPcxXwGcj
Many HTMLEditRules methods use the pattern of
nsCOMPtr<nsIEditor> kungFuDeathGrip(mHTMLEditor);
at the beginning of the method, followed by using mHTMLEditor freely.
If Init() is then called on the editor, mHTMLEditor is set to null, so
it will crash. Other bad stuff will probably happen too.
MozReview-Commit-ID: gUtaTAQJIh
When deleting, we previously would only move the cursor back into the
previous block if the last leaf node was a text node, for some reason.
We should move into the previous block in other cases as well, like if
the leaf node is a collapsed <br>. (Probably it's not correct to move
backward into tables, but that already was happening if the table had
text at the end. There may be other cases where this is wrong.)
MozReview-Commit-ID: 8e0dTU3lNYO
If the user tries to insert text without moving the cursor, the
invisible break will become visible, which from the user's perspective
means an extra line break was inserted for no reason.
The IsVisBreak change here is a bit scary, because it may result in
unexpected behavior changes, but it seems to improve correctness. If it
turns out to cause problems, it can be added as a special case to
GetGoodSelPointForNode instead.
MozReview-Commit-ID: 7SRQYHYtJvF
When deleting, we previously would only move the cursor back into the
previous block if the last leaf node was a text node, for some reason.
We should move into the previous block in other cases as well, like if
the leaf node is a collapsed <br>. (Probably it's not correct to move
backward into tables, but that already was happening if the table had
text at the end. There may be other cases where this is wrong.)
MozReview-Commit-ID: 8e0dTU3lNYO
If the user tries to insert text without moving the cursor, the
invisible break will become visible, which from the user's perspective
means an extra line break was inserted for no reason.
The IsVisBreak change here is a bit scary, because it may result in
unexpected behavior changes, but it seems to improve correctness. If it
turns out to cause problems, it can be added as a special case to
GetGoodSelPointForNode instead.
MozReview-Commit-ID: 7SRQYHYtJvF
Bug 1268736 inadvertently put a new test before a skip-if line, which
makes the new test skipped instead of the preexisting one.
MozReview-Commit-ID: 20SuUc3IhiG
This patch is generated by the following commands (note: if you're running
using OS X's sed, which accepts slightly different flags, you'll have to
specify an actual backup suffix in -i, or use gsed from Homebrew):
hg stat -c \
| cut -c 3- \
| tr '\n' '\0' \
| xargs -0 -P 8 gsed --follow-symlinks 's/\bnsCSSProperty\b/nsCSSPropertyID/g' -i''
Then:
hg mv layout/style/nsCSSProperty.h layout/style/nsCSSPropertyID.h
... and finally, manually renaming nsCSSProperty in the include guard in
nsCSSProperty.h.
MozReview-Commit-ID: ZV6jyvmLfA
--HG--
rename : layout/style/nsCSSProperty.h => layout/style/nsCSSPropertyID.h
The merge from inbound to central conflicted with the merge from
autoland to central, it appears. Per tree rules, the commit from the
autoland repo wins and the inbound commit gets backed out.
CLOSED TREE
--HG--
extra : amend_source : 927e1cdfa8e55ccbd873d404d905caf6871c8c4f
extra : histedit_source : 07095868c3f767258e1d7d2645193bf4811b13bb%2Ca49ae5a28bf6e67298b6208ee9254c25a2539712
This patch is generated by the following commands (note: if you're running
using OS X's sed, which accepts slightly different flags, you'll have to
specify an actual backup suffix in -i, or use gsed from Homebrew):
hg stat -c \
| cut -c 3- \
| tr '\n' '\0' \
| xargs -0 -P 8 gsed --follow-symlinks 's/\bnsCSSProperty\b/nsCSSPropertyID/g' -i''
Then:
hg mv layout/style/nsCSSProperty.h layout/style/nsCSSPropertyID.h
... and finally, manually renaming nsCSSProperty in the include guard in
nsCSSProperty.h.
MozReview-Commit-ID: ZV6jyvmLfA
--HG--
rename : layout/style/nsCSSProperty.h => layout/style/nsCSSPropertyID.h
