This patch adds reporting the surface types used by the image frame in a
bit mask (such if it is a CAPTURE including a DATA_SHARED, the mask will
be 1 << CAPTURE | 1 << DATA_SHARED), as well as an estimated size
included in the report as decoded-unknown for when we do not know if the
surface is on the heap or the non-heap specifically. This is the default
implementation for a SourceSurface as well, so we should no longer have
the case where surfaces appear empty despite being in the cache. It also
makes requests being validated as always notable for reporting purposes.
Differential Revision: https://phabricator.services.mozilla.com/D61458
--HG--
extra : moz-landing-system : lando
This patch adds an annotation to an image cache entry if it is in the
process of being validated. This is very useful to know when debugging
missing images because state notifications are suppressed when we are
validating and may prevent the image from being displayed.
Differential Revision: https://phabricator.services.mozilla.com/D60526
--HG--
extra : moz-landing-system : lando
This patch adds error and progress tracker states to the memory dump. It
also now will include requests that have yet to create an image, and
fills in what information it is able to without it (such as URI, error
and progress tracker states).
Additionally the notability of an image has changed. If there are any
errors, missing progress trackers, or incomplete surfaces, they will
also now be notable. This is a departure from just the memory footprint.
Differential Revision: https://phabricator.services.mozilla.com/D60495
--HG--
extra : moz-landing-system : lando
This dumps more information about the surface cache. Each surface has a
flag indicating whether or not it has finished decoding; incomplete
surfaces are now marked as such in the cache reports. We now also have
counters for various insertion errors, as well as the composition of the
cache (total vs locked images, total vs locked surfaces).
Differential Revision: https://phabricator.services.mozilla.com/D60450
--HG--
extra : moz-landing-system : lando
When the underlying image request (imgIRequest) changes for an image, we
need to ensure that we invalidate the cached WebRenderImageData such that
the image container stored therein is updated to be for the correct
image. This gets a little tricky because some display items store both
the current and previous images, and choose to display the latter if the
former is not yet ready. We also don't know what image the image
container belongs to. As such, we now compare the producer ID of the
current frame in the image container, to the expected producer ID of the
current image request. If they don't match, we must regenerate the
display list.
Differential Revision: https://phabricator.services.mozilla.com/D19699
If a vector image has an image container, it is unlikely the caller will
call VectorImage::Draw (and thus Show indirectly) to display the image.
As such, WebRender was missing subsequent invalidations and not
regenerating the rasterized surface as expected. Thus we now resume
honoring the invalidations if we updated the image container.
Differential Revision: https://phabricator.services.mozilla.com/D15667
This patch makes ImageContainer create a SharedSurfacesAnimation object
when it detects that we are using shared surfaces and are producing full
frames.
Differential Revision: https://phabricator.services.mozilla.com/D7505
At present, surface providers roll up all of their individual surfaces
into a single reporting unit. Specifically this means animated image
frames are all reported as a block. This patch removes that
consolidation and reports every frame as its own SurfaceMemoryReport.
This is important because each frame may have its own external image ID,
and we want to cross reference that with what we expect from the GPU
shared surfaces cache.
At present, surface providers roll up all of their individual surfaces
into a single reporting unit. Specifically this means animated image
frames are all reported as a block. This patch removes that
consolidation and reports every frame as its own SurfaceMemoryReport.
This is important because each frame may have its own external image ID,
and we want to cross reference that with what we expect from the GPU
shared surfaces cache.
If FLAG_HIGH_QUALITY_SCALING is used, we should use
SurfaceCache::LookupBestMatch just like how it is done in RasterImage.
This may provide an alternative size at which we should rasterize the
SVG instead of the requested size. Since SurfaceCache imposes a maximum
size for which it will permit rasterized SVGs, we should also bypass the
cache entirely if we are well above that and simply draw directly to the
draw target in such cases.
With WebRender, it is somewhat more complicated. We will now return
NOT_SUPPORTED if the size is too big, and this should trigger fallback
to blob images. This should only produce drawing commands for the
relevant region and save us the high cost of rasterized a very large
surface on the main thread, which at the same time, looking as crisp as
a user would expect.
If FLAG_HIGH_QUALITY_SCALING is used, we should use
SurfaceCache::LookupBestMatch just like how it is done in RasterImage.
This may provide an alternative size at which we should rasterize the
SVG instead of the requested size. Since SurfaceCache imposes a maximum
size for which it will permit rasterized SVGs, we should also bypass the
cache entirely if we are well above that and simply draw directly to the
draw target in such cases.
With WebRender, it is somewhat more complicated. We will now return
NOT_SUPPORTED if the size is too big, and this should trigger fallback
to blob images. This should only produce drawing commands for the
relevant region and save us the high cost of rasterized a very large
surface on the main thread, which at the same time, looking as crisp as
a user would expect.
In addition to the image container, the draw result can also be useful
for callers to know whether or not the surface(s) in the container are
fully decoded or not. This is used in subsequent parts to avoid
flickering in some cases.
The shared memory handle reporting has been generalized to be an
external handle reporting. This is used for both shared memory, and for
volatile memory (on Android.) This will allow us to have a better sense
of just how many handles are being used by images on Android.
Additionally we were not properly reporting forced heap allocated
memory, if we were putting animated frames on the heap. This is because
we used SourceSurfaceAlignedRawData without implementing
AddSizeOfExcludingThis.
When FLAG_HIGH_QUALITY_SCALING is used, we need to make sure we continue
using that flag when we update the container. We should also use it for
comparing whether or not an existing image container is equivalent.
Exposure of this functionality comes in a later patch in the set.
Experimental testing with WebRender and image layers enabled suggests
most of the time we are not using more than one image container per
image, hence why mImageContainers has room for one container without a
malloc.
As part of the move, we add a IntSize parameter to
ImageResource::GetCurrentImage. This is because we don't have access to
the image's size (yet) from ImageResource, but additionally because we
will need this anyways when we support multiple image containers at
different sizes.
The only change to the moved implementation is that we no longer have
access to RasterImage::mHasSize and RasterImage::mSize. Thus we rely
upon imgIContainer::IsImageContainerAvailable to perform these checks.
This state will eventually be used by VectorImage when it supports image
containers. For now, it is harmless beyond using slightly more memory
for SVGs.
All the SizeOf{In,Ex}cludingThis() functions take a MallocSizeOf function
which measures memory blocks. This patch introduces a new type, SizeOfState,
which includes a MallocSizeOf function *and* a table of already-measured
pointers, called SeenPtrs. This gives us a general mechanism to measure
graph-like data structures, by recording which nodes have already been
measured. (This approach is used in a number of existing reporters, but not in
a uniform fashion.)
The patch also converts the window memory reporting to use SizeOfState in a lot
of places, all the way through to the measurement of Elements. This is a
precursor for bug 1383977 which will measure Stylo elements, which involve
Arcs.
The patch also converts the existing mAlreadyMeasuredOrphanTrees table in the
OrphanReporter to use the new mechanism.
--HG--
extra : rebase_source : 2c23285f8b6c3b667560a9d14014efc4633aed51
The SurfaceCache can hold the first frame of a "static" decode as well as the animated frames in two seperate entries. We only care about what happens to the animated frames, so ignore OnSurfaceDiscarded for anything else.
To accomplish this we must pass the SurfaceKey to OnSurfaceDiscarded.
The SurfaceCache can hold the first frame of a "static" decode as well as the animated frames in two seperate entries. We only care about what happens to the animated frames, so ignore OnSurfaceDiscarded for anything else.
To accomplish this we must pass the SurfaceKey to OnSurfaceDiscarded.
The bulk of this commit was generated with a script, executed at the top
level of a typical source code checkout. The only non-machine-generated
part was modifying MFBT's moz.build to reflect the new naming.
CLOSED TREE makes big refactorings like this a piece of cake.
# The main substitution.
find . -name '*.cpp' -o -name '*.cc' -o -name '*.h' -o -name '*.mm' -o -name '*.idl'| \
xargs perl -p -i -e '
s/nsRefPtr\.h/RefPtr\.h/g; # handle includes
s/nsRefPtr ?</RefPtr</g; # handle declarations and variables
'
# Handle a special friend declaration in gfx/layers/AtomicRefCountedWithFinalize.h.
perl -p -i -e 's/::nsRefPtr;/::RefPtr;/' gfx/layers/AtomicRefCountedWithFinalize.h
# Handle nsRefPtr.h itself, a couple places that define constructors
# from nsRefPtr, and code generators specially. We do this here, rather
# than indiscriminantly s/nsRefPtr/RefPtr/, because that would rename
# things like nsRefPtrHashtable.
perl -p -i -e 's/nsRefPtr/RefPtr/g' \
mfbt/nsRefPtr.h \
xpcom/glue/nsCOMPtr.h \
xpcom/base/OwningNonNull.h \
ipc/ipdl/ipdl/lower.py \
ipc/ipdl/ipdl/builtin.py \
dom/bindings/Codegen.py \
python/lldbutils/lldbutils/utils.py
# In our indiscriminate substitution above, we renamed
# nsRefPtrGetterAddRefs, the class behind getter_AddRefs. Fix that up.
find . -name '*.cpp' -o -name '*.h' -o -name '*.idl' | \
xargs perl -p -i -e 's/nsRefPtrGetterAddRefs/RefPtrGetterAddRefs/g'
if [ -d .git ]; then
git mv mfbt/nsRefPtr.h mfbt/RefPtr.h
else
hg mv mfbt/nsRefPtr.h mfbt/RefPtr.h
fi
--HG--
rename : mfbt/nsRefPtr.h => mfbt/RefPtr.h
