We have 52 passes and 5 known fails. Three of the passes have higher fuzziness
allowances than they should, so really there are 8 files that we need to
improve on.
--HG--
extra : rebase_source : 23738272b38c7d03c90e425e8170fc3fabc4c021
This patch is a major overhaul of nsBMPDecoder.
The patch improves the code in the following ways.
- It converts nsBMPDecoder to use StreamingLexer, which makes it much easier to
read.
- It adds a detailed comment about the BMP format at the top of
nsBMPDecoder.cpp.
- It fixes lots of inconsistent indenting.
- It moves |bihsize| from |mBFH| to |mBIH| to match the file format and common
sense. The avoids the need for the confusing LENGTH/INTERNAL_LENGTH
distinction.
- It renames most of the types in BMPFileHeader.h, so they have better names,
in StudlyCaps form, and within the new |bmp| namespace.
- It removes the BMP_HEADER_LENGTH struct and inlines its values directly into
the two places they were used.
- It removes the MOZ_LOG logging done on some of the failure cases. (Most
failure cases lacked logging so why bother with some?)
- It removes over 200 lines of code, despite the addition of the big format
comment.
The patch changes the way BMPs are decoded as follows.
- It adds stricter testing of the InfoHeader length, rejecting files with bad
values.
- It moves all header sanity checking that can lead to file rejection into the
metadata decode phase. (Previously, bpp/compression consistency checking did
not occur during a metadata decode.)
- It removes BMPINFOHEADER::ALPHABITFIELDS, which was (a) a weird WinCE-only
thing, and (b) we didn't actually allow it, and (c) we used the value 4
instead of 6(!).
- It rejects the previously-accepted compression==RLE4 && bpp=1 combination
because it doesn't make sense.
- It removes a fudge in RLE absolute mode handling that permitted one pixel too
many in a row but only if the row's width was odd(!)
- It now rejects a file with a negative gap between the color table and the
pixel data.
The patch leaves the following problems unaddressed.
- If bpp==32 we totally ignore compression==BITFIELDS and treat it like
compression=RGB.
- Transparency as specified in WinBMPv{4,5} isn't handled at all.
These will be fixed in follow-ups.
All these changes affect (for the better) the results of the following tests
that will be added in part 2:
- g/pal8v4.bmp
- g/pal8v5.bmp
- q/pal8os2sp.bmp
- q/pal8os2v2.bmp
- q/pal8os2v2-16.bmp
- b/badheadersize.bmp
- b/badpalettesize.bmp
- b/badrle.bmp
--HG--
extra : rebase_source : 8ddc2f5fccce6998348097ff9f0a1072d273cdf4
|getReportsForThisProcess| differs from |getReports| in that it is limited to current process and is synchronous. When asynchronous memory reporters are added the function will no longer be able tobe synchronous. There isn't much utility in only measuring the current process, so we can remove the function and switch existing users to |getReports|.
The conversion is as follows:
- GraphicsFilter::FILTER_NEAREST == gfx::Filter::POINT
- GraphicsFilter::FILTER_GOOD == gfx::Filter::GOOD
- GraphicsFilter::FILTER_BEST == gfx::Filter::LINEAR
Also typedef GraphicsFilter to gfx::Filter; this will be removed in the next
patch.
These changes mean ToFilter() and ThebesFilter() are no longer needed.
|getReportsForThisProcess| differs from |getReports| in that it is limited to current process and is synchronous. When asynchronous memory reporters are added the function will no longer be able tobe synchronous. There isn't much utility in only measuring the current process, so we can remove the function and switch existing users to |getReports|.
The orientation matrix converts from decoded image space to oriented image space. The invalidation rect is in decoded image space. So we need to use the orientation matrix to convert it to oriented image space, not it's inverse.
Also...
- Rename various "operator" identifiers as "op" to match |CompositionOp|.
- Rename |nsBackgroundLayerState::mCompositingOp| as |mCompositionOp| to match
|CompositionOp|.
- Remove some deprecated functions that are no longer needed.
--HG--
extra : rebase_source : 74e9b6eecf6f442e27cc18fd4ae6f668a45188aa
gfxIntSize is just a typedef of gfx::IntSize, so this is very mechanical. The
only tricky part is deciding for each occurrence whether to replace it with
IntSize, gfx::IntSize or mozilla::gfx::IntSize; in all cases I went with the
shortest one that worked given the existing "using namespace" declarations.
--HG--
extra : rebase_source : 67fd15f87222b16defa70ef795c6d77dfacf1c36
Various bits depend on RefPtr.h to provide RefCounted<T> and RefPtr<T>.
It will be easier to manage an automatic conversion from RefPtr<T> to
nsRefPtr<T> if we split out the dependency on RefCounted<T> first.
There are many sub-classes of nsExpirationTracker. In order to distinguish them
nicely in the logging of timer firings, it's necessary to manually name each
one. (This wouldn't be necessary if there was a way to stringify template
parameters, but there isn't.)
--HG--
extra : rebase_source : 89b99e9dbb2a806bd21145d04a5e023794643b61
The patch removes 455 occurrences of FAIL_ON_WARNINGS from moz.build files, and
adds 78 instances of ALLOW_COMPILER_WARNINGS. About half of those 78 are in
code we control and which should be removable with a little effort.
--HG--
extra : rebase_source : 82e3387abfbd5f1471e953961d301d3d97ed2973
Use counter submission normally happens at document destruction. For
testing use counters, however, we need to have use counters updated in
telemetry at deterministic points. Therefore, we provide a method on
nsIDOMWindowUtils that forces use counters out to telemetry so we can
examine them.
This patch gives ns{I,}Document the ability to track use counters and
also to send those to telemetry at document destruction time. We push
things to telemetry lazily because we're can't definitively say whether
something has been used until the document is torn down.
This is motivated by three separate but related problems:
1. Our concept of recursion depth is broken for things that run from AfterProcessNextEvent observers (e.g. Promises). We decrement the recursionDepth counter before firing observers, so a Promise callback running at the lowest event loop depth has a recursion depth of 0 (whereas a regular nsIRunnable would be 1). This is a problem because it's impossible to distinguish a Promise running after a sync XHR's onreadystatechange handler from a top-level event (since the former runs with depth 2 - 1 = 1, and the latter runs with just 1).
2. The nsIThreadObserver mechanism that is used by a lot of code to run "after" the current event is a poor fit for anything that runs script. First, the order the observers fire in is the order they were added, not anything fixed by spec. Additionally, running script can cause the event loop to spin, which is a big source of pain here (bholley has some nasty bug caused by this).
3. We run Promises from different points in the code for workers and main thread. The latter runs from XPConnect's nsIThreadObserver callbacks, while the former runs from a hardcoded call to run Promises in the worker event loop. What workers do is particularly problematic because it means we can't get the right recursion depth no matter what we do to nsThread.
The solve this, this patch does the following:
1. Consolidate some handling of microtasks and all handling of stable state from appshell and WorkerPrivate into CycleCollectedJSRuntime.
2. Make the recursionDepth counter only available to CycleCollectedJSRuntime (and its consumers) and remove it from the nsIThreadInternal and nsIThreadObserver APIs.
3. Adjust the recursionDepth counter so that microtasks run with the recursionDepth of the task they are associated with.
4. Introduce the concept of metastable state to replace appshell's RunBeforeNextEvent. Metastable state is reached after every microtask or task is completed. This provides the semantics that bent and I want for IndexedDB, where transactions autocommit at the end of a microtask and do not "spill" from one microtask into a subsequent microtask. This differs from appshell's RunBeforeNextEvent in two ways:
a) It fires between microtasks, which was the motivation for starting this.
b) It no longer ensures that we're at the same event loop depth in the native event queue. bent decided we don't care about this.
5. Reorder stable state to happen after microtasks such as Promises, per HTML. Right now we call the regular thread observers, including appshell, before the main thread observer (XPConnect), so stable state tasks happen before microtasks.
This makes it clearer that, unlike how SizeOf*() functions usually work, this
doesn't measure any children hanging off the array.
And do likewise for nsTObserverArray.
--HG--
extra : rebase_source : 6a8c8d8ffb53ad51b5773afea77126cdd767f149
imgFrame::SizeOfExcludingThis() measures heap and non-heap memory in a very
complex way. This patch simplifies it and removes gfxMemoryLocation in the
process. (gfxMemoryLocation::OUT_OF_PROCESS was unused.)
--HG--
extra : rebase_source : 72af38fa438b4b42df02231bcf2fa731d247b60d