<!-- Please describe your changes on the following line: -->
The `HTMLLinkElement::set_stylesheet` function now checks whether there already is a stylesheet, and if there is, calls `Document::invalidate_stylesheets` after modifying `self.stylesheet`.
This PR also includes a minimal WPT that causes the panic.
This is fundamentally a timing issue, so while this fix prevents the crash, it does not fix the underlying issue. Making a <link> element send a second request before the first can finish and then getting the two stylesheet responses out-of-order will apply the wrong stylesheet, as demonstrated with https://gist.github.com/SwagColoredKitteh/2c24c7fac635445042eda4a30e10420e.
r? @emilio
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#15101 (github issue number if applicable).
<!-- Either: -->
- [X] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: c3f0c9054feb97f4b3c106393930887d9841df1f
This is a followup to #15129, addressing my last review comment.
r? anyone
Source-Repo: https://github.com/servo/servo
Source-Revision: 231481570e7ffc6c036b54a15507a9b2260ffe87
<!-- Please describe your changes on the following line: -->
Fixes inline size calculation for TableWrapper. The table's width was always reaching the inline size equation solver as a specified variable, which was causing the system to be overdetermined when there was a margin specified for the table, and this caused the overflow reported in #12748. The fix consists in handling three cases when the table's width is not specified: if the preferred size of all columns fits, it is returned; if the minimum size does not fit, it is returned instead (it will overflow), otherwise, it is returned as a free variable (that should be solved together with the margin to some value above the minimum width and below the preferred width).
---
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#12748
- [X] There are tests for these changes
Source-Repo: https://github.com/servo/servo
Source-Revision: b0f91193fd4fbb86fc75fc593a6fdc40dc95bfcd
<!-- Please describe your changes on the following line: -->
* Refactor all scroll related code to use a new `ScrollLocation` struct which can either be a `delta` (as before) or a `Start` or `End` request, to represent the desire to scroll to the start and end of the page.
Effectively, everywhere a delta was used, there is now a `ScrollLocation` struct instead.
* Add key press listeners for HOME and END keys so as to cause a scroll to be queued with `ScrollLocation::Start` (in HOME case) or `ScrollLocation::End` (in END case).
* These changes depend on added support for the new `ScrollLocation` in webrender and webrender_traits. See https://github.com/servo/webrender/pull/540.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ x] These changes fix#13082 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because scrolling I/O
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 1706ffd6e5a02f26f69970b3b41536a8a85ef6fe
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14682.
<!-- Either: -->
r? @jdm
passing tests:
tests/wpt/mozilla/tests/css/matchMedia.html, tests/wpt/mozilla/tests/mozilla/window_resize_not_triggered_on_load.html, tests/wpt/mozilla/tests/mozilla/iframe/resize_after_load.html, tests/wpt/mozilla/tests/css/meta_viewport_resize.html
Source-Repo: https://github.com/servo/servo
Source-Revision: 7e2329ea4eb81f9153a64f63264ebb29d771e82d
Also remove the obsolete `--cpu` and `--gpu` renderer flags,
which also are no longer used.
Update tests and wptrunner to not pass these flags.
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#13761 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because the tests are updated to no longer pass these flags
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: bb24fd3177cd69931d6a894bfcbb605286cefa1e
selectors 0.15.1 supports AFFECTED_BY_ANIMATIONS and
AFFECTED_BY_TRANSITIONS, which are used by stylo animations.
Reference:
https://bugzilla.mozilla.org/show_bug.cgi?id=1317209
---
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix Bug 1317209
- [X] These changes do not require tests because I only update the version, which only added two StyleRelations flags, and are not used yet
Source-Repo: https://github.com/servo/servo
Source-Revision: 0170138887005215b2b6e194d8765e33ff3a2657
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#14685 (github issue number if applicable).
<!-- Either: -->
- [x] There are tests for these changes
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: c75946c3ed52d262aae585055023becd5a2e9769
As per issue: https://github.com/servo/servo/issues/14500
I have added a test to ensure that TrustedPromise does not implement Clone.
This is my first PR to the project, so feedback in terms of both code and the actual PR would be very welcome.
Thanks,
Verlet64
---
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#14500
- [x] There are tests for these changes
Source-Repo: https://github.com/servo/servo
Source-Revision: 27a7999d5d85c9b1156554f597cb0eea592624e1
<!-- Please describe your changes on the following line: -->
Add `font-stretch` sub-property to font shorthand
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#15027 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: c3c4805c826355ad272c78d6d413e6df57b1acf9
Teaches the `etc/ci/check_no_panic.sh` script to handle directories,
so it can check all constellation files for panics.
<!-- Please describe your changes on the following line: -->
r? @asajeffrey
There are currently 4 `unwrap()`s in `components/constellation/timer_scheduler.rs`; I'm not sure how you want to handle those.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [ ] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#14976 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because it adds more testing coverage
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: f9505c7fafcbabd24cfa613493ecacd3e29d273e
<!-- Please describe your changes on the following line: -->
I still need to pass the origin clean flag to constructors. `style::stylesheets::Stylesheet` has an origin field but I don't think that's relevant.
I can get href in htmllinkelement.rs like this:
```rust
let element = self.upcast::<Element>();
let href = element.get_string_attribute(&local_name!("href"));
```
But I'm not sure how to proceed after here.
@Manishearth any opinions?
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14327 (github issue number if applicable).
<!-- Either: -->
- [X] There are tests for these changes
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 15c542d3a10d2764fda14f8e54054eeb113bff1a
It’s a compiler plugin that uses unstable compiler APIs that are not on a path to stabilization.
With this changes, there is one less thing that might break when we update the compiler. For example: https://github.com/sfackler/rust-phf/pull/101
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: eade32ed16569806a849e74a395d92a2dbd980a0
<!-- Please describe your changes on the following line: -->
This is currently WIP, but allows Salt for `mach bootstrap`. Not looking for review yet, just posting for visibility. You can run `./mach bootstrap` and Salt will run, letting you know what changes it would make for bootstrapping (doesn't actually run yet though).
Currently, this reads from saltfs using gitfs, meaning it always tracks the master branch. (Note that this is blocked on https://github.com/servo/saltfs/pull/577 landing; in the meantime, I've included a small workaround in this PR to pull from my updated saltfs branch, which will need to be removed.) In the future, the relevant Salt code may be merged in tree as part of Docker support for TC, and the bootstrapper should be updated to read from in tree.
Also, our Windows machines have not been Salted, so the existing Windows bootstrappers are retained.
TODO:
- [x] Hook into existing bootstrapping code less hackily
- [x] Actually bootstrap instead of always using `test=True` mode (includes sudo)
- [x] Default to interactive mode (test first, then ask), with a force flag
- [x] Don't require running from the repository root directory
- [x] Make it easy to add support for other distros
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [ ] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because they should be verified manually
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 1f76aa6ef7ec7db0a0c40223874a72e8f4059deb
<!-- Please describe your changes on the following line: -->
First time contributor here. Noticed this issue is easily solved, so I did it. I am very unsure about how things work here: Is a test needed? What should it look like? Should the "unwrap" be avoided (making bigger changes to the code)?
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14497 (github issue number if applicable).
- [X] There are tests for these changes
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 29d4f7d467a1e50b7bcff651743fd5b5bfac2c66
<!-- Please describe your changes on the following line: -->
servo gave an ssl error on servoexperiments.com because it didn't have the Let's Encrypt X3 authority (https://letsencrypt.org/certificates/)
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X ] `./mach build -d` does not report any errors
- [X ] `./mach test-tidy` does not report any errors
- [ X] These changes fix#15087 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ X] These changes do not require tests because webpage couldn't load before, can now :)
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 3a8167350b2544859745b1b89c96ca262b510e12
<!-- Please describe your changes on the following line: -->
converted some debug! invocations to trace!
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#15100 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X] These changes do not require tests because only logging changed
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: b8df502491b880cb942badee4ddbf7ec65b174fb
This PR implements downloadable font support for Servo. It depends on new changes in webrender and dwrote, and adds a dependency on the `truetype` crate for pulling out basic font information. The original DirectWrite API does not provide an easy way to query font information direct from a `FontFace` (which is what you create from a `FontFile`). There are new DirectWrite APIs starting with Windows 10 that allow for this, but they are Win 10+ only, and `winapi-rs` does not yet have bindings for those versions of the interfaces (specificially, `IDirectWriteFontFace3`). The way to do this with DW is to go through a lot of pain in creating a custom collection and enumerator, add your font to your custom collection, then query the collection for its properties.
Instead, we just parse the truetype tables directly to pull out the few bits of information that we need. The `truetype` crate is ok, but I discovered some bugs (an update needs to get pushed to crates.io before this will build). It might be more worthwhile to just implement the tiny bit of truetype parsing that we need ourselves in Servo.
I'm guessing there are existing tests for downloadable fonts...
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 1a7404e38c0f0e9c58487299956bec78589191c7
<!-- Please describe your changes on the following line: -->
Offset parent queries, which are used in the getters for HTMLElement's `offsetParent`, `offsetTop`, `offsetLeft`, `offsetWidth`, and `offsetHeight`, are pretty busted. The most egregious bug is that, as reported in #12939, inline elements are treated as if they're not present in the document. This PR fixes that and all of the other bugs I could trace directly to the offset parent query code, but `offsetTop` and `offsetLeft` are still unreliable in certain circumstances for reasons I haven't looked into (#13708). Inline elements with no content are still treated as not present due to #13982, so #13944 isn't fixed with this PR, either.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#12939 and fix#12595
<!-- Either: -->
- [X] There are tests for these changes
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: b08d4a7d395e41a344085d4cf79801c62019c976
<!-- Please describe your changes on the following line: -->
As we begin to add more state to `FrameState`, we need to make sure that when we do replacements and when we finish traversals that the state is properly updated. This also fixes an issue where we were not updating the `url` of the `FrameState` when navigating with replacement enabled (I wonder if it would be possible to write a test to detect this. The url only matters when reloading a document after it was discarded by the max session history).
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 68fa988bf32fab97a2d6ad3231de81c3bcb1939d
<!-- Please describe your changes on the following line: -->
Reviewed in the bug.
Source-Repo: https://github.com/servo/servo
Source-Revision: 1755ad7b75e056a534e12f375a6677f5c069f4c2
For #15061
CalcLOP is a large struct, and gets used quite often. While #15063 reduces its size a bit,
it will still be much larger than any of the other variants in the `specified::Length*` types,
so it will still bloat sizes, especially for specified values that contain many lengths.
This change boxes it in the length types, so that it just takes one word.
r? @heycam
Source-Repo: https://github.com/servo/servo
Source-Revision: f010fb58fdb4526a76581ba6536f807f2b2a4955
`./mach build-geckolib --with-gecko ...` is broken due to regex's API changing a bit.
r? @Manishearth
Source-Repo: https://github.com/servo/servo
Source-Revision: b4980f9037805c04eed4387cd1f848c29f9ac557
Only create scroll roots for overflow regions when the overflow region
is actually larger than the container size. This prevents creating
scrolling roots for elements that do not have overflow scroll as a
side-effect of the way their height and width is defined. For example,
tables should never respect overflow:scroll since their height and
width should always be large enough to prevent overflow. This also
decreases the size and complexity of the display list in many other
circumstances.
As part of this change, transformed overflow calculation is moved from
display list construction to layout. This should mean that overflow is
handled more accurately earlier.
Fixes#14574.
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#14574 (github issue number if applicable).
<!-- Either: -->
- [x] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 3ab514302f964a76938b8c87b4f27edb00d0f537
Due to #15076, I want to make sure that the TravisCI status is meaningful as much as possible.
Source-Repo: https://github.com/servo/servo
Source-Revision: 5fca03418fb4c04d2282b5ae1cac862eafe7afe8
<!-- Please describe your changes on the following line: -->
We don't really need enum variants in `CalcLengthOrPercentage`. Given that we already have the information (whether it's `vw`, `ch`, etc.) in the struct fields, we could just store `Option<CSSFloat>` there, and modify our `ToCss` implementation a bit.
cc #15061
r? @Manishearth or anyone interested
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
<!-- Either: -->
- [x] These changes do not require tests because it's a refactor
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: a70af60eec11fa0a19cfd889c56b09dc834b35af
…to other stacking context space.
I don't know how neither review or a test caught this.
r? @pcwalton or @notriddle
Fixes#15015
Source-Repo: https://github.com/servo/servo
Source-Revision: a4551d0ceea8f2aceb68775452ea3010760f2825
They were formerly different because we used the element check to cull the
traversal.
Now this is no longer true, so we can just unify them.
Also, update a no-longer up-to-date comment on that.
r? @bholley
Source-Repo: https://github.com/servo/servo
Source-Revision: e01417e936b93694b3038095827cc3e3cf3e0e82
This was yielding incorrect line numbers when looking at JS backtraces in gdb.
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] There are tests for these changes
Source-Repo: https://github.com/servo/servo
Source-Revision: ecd1d2dbc9a94c88c718cb311603d35a4f667356
This replicates the same model that Promise uses right now, because it requires less thinking than coming up with something else.
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14447
- [ ] There are tests for these changes
Source-Repo: https://github.com/servo/servo
Source-Revision: e891277dd5a52bc3a2b76dfd78da9b82b4c11b40
The spec does say user agents may not blink, but it doesn't say this
value can be ignored during parsing.
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: ee082d83634503834f145a1c3d01dee4aa154714
We previously had this and removed it because it caused runtime slowdowns
(discussion in #11102), but that was in release mode.
Debug mode is already very slow at runtime.
In my opinion, debug mode is mostly for the edit-compile-test cycle
which is currently dominated by compile times, so sacrificing runtime for compile time makes sense.
I’ve observed a ~30% improvement of compile times with this. This figure is consistent between a very fast desktop with 4 cores / 8 threads and a not-as-fast laptop with 2 cores / 4 threads.
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: ad1b11771b93ced67b409436c7bf0f493ec4663a
<!-- Please describe your changes on the following line: -->
Converted document discarding from an opt into a pref. Updated testing docs and changed all uses to pref api.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14960 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X] These changes do not require tests because current test suite is sufficient
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: d09bf70d220262e2c199abf61b4b78b7137d6665
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
<!-- Either: -->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 89c020f25887961570b9ec7c4ebf592e021c0ea8
<!-- Please describe your changes on the following line: -->
Moved tidy.py's BLOCKED_PACKAGES to servo-tidy.toml.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#15014 (github issue number if applicable).
<!-- Either: -->
- [X] These changes do not require tests because this is a refactor and the existing tests have been adapted.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 7eb811b837545c295506c25207c891126b6db0ff
<!-- Please describe your changes on the following line: -->
This is a PR of the counter part of https://bugzilla.mozilla.org/show_bug.cgi?id=1330824 .
All of patches have been reviewed by @heycam and @mystor.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
<!-- Either: -->
- [X] These changes do not require tests because this change is for Stylo.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 655a9fd7ce27f1f985099a21d9f17209edac4ffb
<!-- Please describe your changes on the following line: -->
Documents now fully deactivate when a freeze message is sent
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14906 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X] These changes do not require tests because minimal changes.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 2fb9a345d6341f57ab4cfdd9a1ae68b2bbd5f9a2
<!-- Please describe your changes on the following line: -->
I now have an usual setup where I use a (fast) remote machine for building, and I’m adding a hack to forward end-of-build notifications back to my laptop. This is the motivation for this change, but I kept it general enough that it could be used in other situations.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 414e2e907d3bb83de1f4ab4ae1050145cb6eadcb
Implemented Step three and handled step four of obtain the resource part
of 4.2.4 The link element.
Link to spec : https://html.spec.whatwg.org/multipage/semantics.html#concept-link-obtain
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
<!-- Either: -->
- [X] There are tests for these changes OR
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 9afd96024fc9cb3ea822e8d549f008e03177949b
<!-- Please describe your changes on the following line: -->
The fix from #14935 wasn't quite right.
cc @paulrouget
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [ ] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fixservo/saltfs#575 properly (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because they should be tested by running the mac-nightly builder
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: dc93a72997aefaeb04cdc058b01fdd2eb14cef8f
<!-- Please describe your changes on the following line: -->
This is the result of running `cargo update -p browserhtml` to pick up the fix for issue #14919
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X ] `./mach build -d` does not report any errors
- [X ] `./mach test-tidy` does not report any errors
- [X ] These changes fix#14919 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X] These changes do not require tests because there are no reftests for b.html
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: e6736d067c80fe8613b1882814d596ba1323b870
<!-- Please describe your changes on the following line: -->
This fixes a crash of stylo when you do the following:
```javascript
p.setAttribute("style", "background-blend-mode: multiply");
alert(getComputedStyle(p).backgroundBlendMode);
p.setAttribute("style", "background-blend-mode: normal, normal");
alert(getComputedStyle(p).backgroundBlendMode);
```
r? @Manishearth
Source-Repo: https://github.com/servo/servo
Source-Revision: 93d7298a90c400456e3cea8428ad1c1f3254cc22
This patch allows Servo to incrementally reflow truncated fragments correctly.
* The untruncated version of a fragment is preserved, and when incrementally reflowing, the untruncated version is what gets reflowed. If it needs truncated, it will get truncated again.
* The ellipsis fragments are skipped when incrementally reflowing a line. If it is still needed, it will be recreated.
---
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14952
- [X] There are tests for these changes OR
Source-Repo: https://github.com/servo/servo
Source-Revision: 6a04aea4a5a0da583e8cc7fc0f76c9bfea857538
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 38fccce3ba512bbf7100574e225d73f538fad5f0
<!-- Please describe your changes on the following line: -->
With the previous cargo (and servo’s current rustc, which is newer), `./mach cargo check` warns:
```
warning: --crate-type=metadata is deprecated, prefer --emit=metadata
```
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: a379b17b4aefc10172b0c455743f5f1f710f6fea
<!-- Please describe your changes on the following line: -->
This PR removes the reflow status from each browsing context. Previously, we were only using it to avoid reflowing on traversal, which is rare enough it doesn't seem worth the complexity.
This is a first step towards #14843.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes do not require tests because reflows aren't visible from script
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: cad78b9c6f3d13d73a780fd71eaab580639631dc
<!-- Please describe your changes on the following line: -->
This is for Stylo performance testing (at least before we got Talos running)
r?@Manishearth
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because independent from servo itself
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: da25e881459084395b3f8e5891d08de0645b5f0b
Nobody knows what to do about #14723 and Travis always showing failed builds isn't useful.
Source-Repo: https://github.com/servo/servo
Source-Revision: 14aa666a5a485f32fcbf60a2d249d3e4adcc50c8
Rebased from #14661.
---
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#12744 and partially #9604
- [X] There are tests for these changes
Source-Repo: https://github.com/servo/servo
Source-Revision: eb72c0ec7bc1e3547aa09fbe2ad800310f42989b
<!-- Please describe your changes on the following line: -->
These try!'s are unnecessary here. We can remove them.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
<!-- Either: -->
- [X] These changes do not require tests because it's just refactoring
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 6447a9783892d6ed585cf75b056ef81f0aba504c
<!-- Please describe your changes on the following line: -->
Implements cursor positioning in input elements (text/password) via mouse. The related issue is #10083 but is only covered partly.
This PR does **not** cover:
* positioning in textarea elements via mouse
* text selection in input/textarea elements via mouse
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [ ] These changes fix#10083 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because I can't think of a way to test mouse interaction in the current test pipeline.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 68a8e1bf2b57afe9bf6c4fb295bdc5dca099a9f6
<!-- Please describe your changes on the following line: -->
Add a function that validates the conditions for [Constant Color Blend](https://www.khronos.org/registry/webgl/specs/latest/1.0/#CONSTANT_COLOR_BLEND) in the WebGL specs. ./mach run -r tests/wpt/web-platform-tests/webgl/conformance-1.0.3/conformance/misc/webgl-specific.html
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [x] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 783829eccc44e1c239a4d1aa807b000b755eeea6
<!-- Please describe your changes on the following line: -->
Image Maps: (Part 1) Implemented support for parsing coord attribute to a shape object.
Implemented a hit_test method to see if a point is within the area. Tests for constructors and hit_test included
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [ ] `./mach build -d` does not report any errors
- [ ] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
… object in HTMLAreaElement
Source-Repo: https://github.com/servo/servo
Source-Revision: f6940f686cce249626e4fe32cc0fe5e0dcd40dd6
<!-- Please describe your changes on the following line: -->
Alternate stylesheet are now fetched and then desactivated instead of ignoring them.
I don't know if tests are required to check if the stylesheet is correctly loaded and disabled ?
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14881 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: cfc74e20603e7395a743b3b3c202db6db840da4d
<!-- Please describe your changes on the following line: -->
r? @Manishearth
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: e440a016051703632cac1de6b88ff9e0c94e9017
<!-- Please describe your changes on the following line: -->
This fixes ~7.5k failures in style system mochitests.
r? @Manishearth
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because it is for geckolib only
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 04a3242dc54c670dcdafcf1f0ac5373f2ed612f3
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because they should not change behavior.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Collect scroll roots during the collect_stacking_context phase instead
of during display list construction. This will be useful in order to
collect containing block scroll roots as well as to give scroll roots
sequential ids in the future. This change also pulls stacking context
children out of the StackingContext struct itself, which should reduce
very slightly the memory used by the finished display list. This also
simplifies the DisplayListBuilder because it no longer has to maintain
a stack of ScrollRootIds and StackingContextIds and can instead just
rely on the program stack.
Source-Repo: https://github.com/servo/servo
Source-Revision: dabb79c7878fce31b8b979dd5fcfdfb8713a9d80
<!-- Please describe your changes on the following line: -->
This is the counter part of https://bugzilla.mozilla.org/show_bug.cgi?id=1328786
All patches get reviewed by r=@heycam.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
<!-- Either: -->
- [X] These changes do not require tests because it's for stylo.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 43a537a1ba8d62a39e062a21df9d5c771631411b
get_shorthand_appendable_value doesn't always return a serializable value. This change makes it handle that case correctly.
This change also updates step number in property_value_to_css to reflect the latest spec.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix stylo [bug 1329533](https://bugzilla.mozilla.org/show_bug.cgi?id=1329533)
<!-- Either: -->
- [x] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 867df7f3d7a89b48de76106601cbc5e474acb9dd
<!-- Please describe your changes on the following line: -->
Avoids mapping response types that are distinct according to [the spec](https://fetch.spec.whatwg.org/#concept-response-type) to fewer response types. Also updates test expectations to match that we now pass tests that check the response type.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14068
<!-- Either: -->
- [X] There are tests for these changes
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: f1c82be0e61df679db25199ac3e7afc4be5d141f
<!-- Please describe your changes on the following line: -->
WebVR API Implementation with HTC Vive support on Windows. The current implementations only enables the WebVR support on Windows. In other platforms the API is available on JavaScript but navigator.vr.getDisplays() returns an empty array. This will change when we add support for more VR providers and platforms ;)
Info about the architecture:
https://blog.mozvr.com/webvr-servo-architecture-and-latency-optimizations/
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [X] There are tests for these changes OR
- [ ] These changes do not require tests because _____
Proprietary openvr.dll must be copied next to servo.exe in order to test on HTC Vive (https://github.com/ValveSoftware/openvr/tree/master/bin/win64) I have added some of the official WebVR samples for testing. Switch on your headset and run:
mach run tests/html/webvr/room-scale.html
Source-Repo: https://github.com/servo/servo
Source-Revision: 518ef39cfd429082dd8dc0d5b13e2db637d08a53
These methods are not only used during display list construction, so
they are a better fit for the flow structs themselves. This does
not introduce any behavior change, but should make it easier to fix
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because they are a simple refactor.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 23265321988113b290aff190f859be2290a81545
<!-- Please describe your changes on the following line: -->
When we resolve style for an eagerly computed pseudo-element, such as an anonymous box, if there are no matching rules we currently just clone the parent's style. We should only do that if `inherit_all` is true, otherwise we should inherit only the inherited properties from the parent.
I was going to use `.unwrap_or_default()` on the result of looking up `precomputed_pseudo_element_decls`, but that didn't seem to work since that map lookup returns a reference and not a `Vec` itself.
r? @emilio
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix https://bugzilla.mozilla.org/show_bug.cgi?id=1329121
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: ebd4a8b3ee1aab910ef714420a814912fec31e30
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [ ] `./mach build -d` does not report any errors
- [ ] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 13826970c4d9fbbd67cdf9dfb39e8a847cf06541
<!-- Please describe your changes on the following line: -->
Moves "Script" after "Renderer".
---
<!-- Either: -->
- [X] These changes do not require tests because it's a trivial documentation edit
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 183c4772e7b93bd6cd9b48a729a043421eb6bc65
Added Websocket to RequestMode enum
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#14785 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because matching the enum should have default control flow.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 8fff2f29d0da97a35bece887506964f5fb4b33d6
<!-- Please describe your changes on the following line: -->
Converted some longhands into `vector_longhand` to reduce some repeated codes.
Also some of longhands with same `SpecifiedValue` and `computed_value::T` changed. Re-exported SpecifiedValue instead of computed_value::T. Normally a computed_value can't have a parse function.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
<!-- Either: -->
- [X] These changes do not require tests because they're not changing the behavior of the longhands.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 0d5e021537a18d1e5668c099305cebf754e93007
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#9490 .
<!-- Either: -->
r? @KiChjang
`XMLHttpRequest/send-entity-body-document.htm` is not working atm, I get this output:
```
$ ./mach test-wpt tests/wpt/web-platform-tests/XMLHttpRequest/send-entity-body-document.htm
Running 1 tests in web-platform-tests
Ran 1 tests finished in 0.0 seconds.
• 1 ran as expected. 1 tests skipped.
```
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 87cce8180a3feba92086da0e96ccea09fa177d98
Implemented response validation part of https://w3c.github.io/webappsec-subresource-integrity/.
Implemented step eighteen of the main fetch. If a request has integrity metadata, then following steps are performed
1) Wait for response body
2) If the response does not have a termination reason and response does not match request’s integrity metadata, set response and internalResponse to a network error.
Dependency updated: html5ever-atoms from 0.1.2 to 0.1.3. This will not completely fix#14523, It will implement changes related to response validation. Request validation algorithm implementation needs CSP.
I did not update any WPT-Test. In my local system, I found some assertion issue dependent on the order of execution of test-case. It would be helpful if someone could do "try" build on these changes to get wpt results.
r? @jdm
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
<!-- Either: -->
- [X] There are tests for these changes
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: f958dafcaeed643f1232a23f5c2d4f6ba141bfea
<!-- Please describe your changes on the following line: -->
`transition-timing-function` and `animation-timing-function` properties corrected to reflect [the spec](https://drafts.csswg.org/css-transitions/#serializing-a-timing-function). It was converting function keywords to `cubic-bezier` or `steps` functions directly. But we needed to store it to use in the serialization step.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14822 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 496447a363ca4fc5d6789241ccb0b94134917b9a
Something I just noticed while re-reading that code is that we prevent sharing among siblings with different non-common attributes, even though we already have the infra to match those selectors:
```rust
if !match_same_not_common_style_affecting_attributes_rules(element,
candidate_element,
shared_context) {
miss!(NonCommonAttrRules)
}
```
Source-Repo: https://github.com/servo/servo
Source-Revision: 2225ccd46416443b1e196a14f5ff1b5dff5001d0
Aliases now get forwarded to their "original" property name at parse time. CSSOM continues to provide access through alias getters.
We'll need to probably add `${"-webkit-foo -moz-foo" if gecko else ""}` all over the place. Might want to come up with a convenient attibute name for that (`gecko_prefix="mw"`) or something.
r? @heycam or @bholley
Source-Repo: https://github.com/servo/servo
Source-Revision: d14158a592faa40fa027540578cd2c680cd8caf4
<!-- Please describe your changes on the following line: -->
Changed all Mutable JS values to JS values in the following files and fixed any differences that might have been caused due to type change.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14649 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X] These changes do not require tests because minimal type changes made.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: f94ce710179f34f645b9ea779bab2082593d1de8
<!-- Please describe your changes on the following line: -->
I've added a new tidy rule (no = in the beginning of line) + tests for it. Also cleaned up a few rust source files to accord with the new rule.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14890 (github issue number if applicable).
<!-- Either: -->
- [X] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: b6c137b36f8b9f9cc5c0105bb94a4edeaf7d09be
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: df895cb80c460594f220b6cf28aa5869464d05ec
The idea here is having (for convenience) different `Expression` and `Device` representations for Gecko.
Both will be implemented in rust, but will use `nsMediaFeatures` as a source of media features instead of the Servo bits.
Does it sound good?
r? @heycam or @Manishearth
Source-Repo: https://github.com/servo/servo
Source-Revision: fdddeb1c9229b6f9bc202cb2df1a3701eec47e05
<!-- Please describe your changes on the following line: -->
Oops, indexed from the wrong end when discarding documents in #14312.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes do not require tests because we're not testing document discarding
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 7f9fd0ec1fe70b491d18e99f68988c1381615810
Use the crates.io version of tinyfiledialogs instead of pulling directly from the git repository.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14862 (github issue number if applicable).
<!-- Either: -->
- [X] These changes do not require tests because no code was changed
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 94d62a2afbbbb08d0225dd45fd8a8480d4bdf98d
<!-- Please describe your changes on the following line: -->
Implement browsing context discarding (https://html.spec.whatwg.org/multipage/browsers.html#discard-a-document).
* When a pipeline is closed, inform the script thread whether the browsing context is to be discarded.
* In script threads, synchronously discard any similar-origin documents and browsing contexts.
* When a browsing context is discarded, it loses the reference to the active document, but the window keeps it, so we need to move the `Document` pointer from `BrowsingContext` to `Window`.
* Fix the webIDL for Window to make parent and top optional (the spec says they can return null when the browsing context is discarded).
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14411
- [X] There are tests for these changes
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 8b274f25d3fcbd92dddb83cd96b59a6d51c69d1b
We were using Handles to *copies* of the traced values, rather than the
originals.
Source-Repo: https://github.com/servo/servo
Source-Revision: c3cf4386b04dd3609ada0824c32b0517f840d185
I'm not sure as I'm new with servo but shouldn't the new function ```parse_opt_prefs``` be in ```prefs.rs``` instead of ```opts.rs``` ?
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14842
<!-- Either: -->
- [X] There are tests for these changes OR
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 42e28bf7e59e0c7fab7163326d7374d1c4e268d1
<!-- Please describe your changes on the following line: -->
This PR implements an in-memory random number generator that only uses an OS RNG for (re)seeding. The OS RNG is shared, so there's only one file descriptor for `/dev/urandom` being used.
The PR also implements a tidy check that we don't accidentally introduce an RNG. Rather annoyingly, there are a lot of transitive dependencies on `rand`, notably hash maps in `std`.
This PR makes it possible to use uuids for identifiers such as pipeline and frame ids.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes do not require tests because it's fixing a resource issue
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 36ddf763f66b1b971db07649ff5c69b2e9fd5f91
<!-- Please describe your changes on the following line: -->
r? @Manishearth
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 65497b493ae011d4787f5ca9a7e178d3e17fde8a
<!-- Please describe your changes on the following line: -->
This is a revised PR for #14732.
@emilio?
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
<!-- Either: -->
- [X] There are tests for these changes
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 1d9bbfa07b5aef22a318808e3796872ee12e665c
<!-- Please describe your changes on the following line: -->
Adds support for the other overload of bufferData, fixing many conformance tests. In the process I had to fix the webidl codegen in the overload-distinguished-by-an-object case. Also includes a little fix for glEnable() validation.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [x] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 4216c16879efb6e87b3ba3b7b4d5c2aeb8e2739d
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix https://bugzilla.mozilla.org/show_bug.cgi?id=1298588
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X] These changes do not require tests on the servo side because behavior is unchanged. Gecko-side tests probably exist.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 143dfc879e609603839502d61bc064fba96cc80f
<!-- Please describe your changes on the following line: -->
This PR implements document discarding. Active documents are kept alive strongly, but inactive documents are only kept alive weakly. When a document is GCd, it is marked as discarded, and if it is every reactivated, a reload of the URL is triggered.
Note that this PR is pretty aggressive about discarding, and can any inactive document (other than those being kept alive by other same-origin pipelines). We might want to damp it down a bit.
Also note that this interacts with browser.html in that the reloading triggered by reactivating a document triggers mozbrowser events.
To test this, I added a `-Zdiscard-inactive-documents` debug flag, which discards all inactive documents, even ones which are reachable through other same-origin pipelines.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14262.
- [X] These changes do not require tests because we should be able to use the existing tests with `-Zdiscard-inactive-documents`.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 16b0da5004fd730de87883daa35a78b6af01f042
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14480
- [X] There are tests for these changes
Source-Repo: https://github.com/servo/servo
Source-Revision: 2fe914e2fa68f44db903bc3de55d9823a44cdf0d
<!-- Please describe your changes on the following line: -->
This was an attempt to fix#14659. It turned out that the problem wasn't what I thought it was. So, I didn't fix that. On the brighter side, this fixes two related issues.
- Previously, we were unable to launch `keypress` events from `input` and `textarea` elements, because [we'd been cancelling](1327ebd52f/components/script/dom/htmlinputelement.rs (L1120-L1124)) the key events, so that they don't trigger window navigation - #8400). I've introduced an enum to represent an additional state to an event's cancellation.
- [According to the spec](https://w3c.github.io/uievents/#keypress-event-order), `keypress` (if available) should be dispatched immediately after `keydown`, and it should be followed by `input`. Canceling `keypress` should also cancel `input`. But, we'd been dispatching `input` before `keypress`. We now dispatch `input` once the `keypress` event is on the respective elements.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
<!-- Either: -->
- [x] These changes do not require tests because it's a refactor?
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
r? @jdm or anyone interested
Source-Repo: https://github.com/servo/servo
Source-Revision: 6f9ff7b8bf66cbeb7d539c6728db05f05aa8f85c
These two functions appear in the data from bug 1328497, and the second part of one is identical to the other.
I think the way to fix this is another one (either using static arrays to get
the interesting data, or making rust generate the equivalent code).
Source-Repo: https://github.com/servo/servo
Source-Revision: 96fd0837d3de70b1f0d8f2bff0253b0220e7e5ce
For cases where a stylesheet load finishes in a different document than it started, we need to be more careful about which document we report the completion to. In this case we actually have separate requests for each document involved, but they previously used the same element to determine which document to interact with.
---
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14641
- [X] There are tests for these changes OR
Source-Repo: https://github.com/servo/servo
Source-Revision: 384e905be23cd10e7bc352da1171b9af9e6eaddc
While reviewing @bzbarsky's patches in [1], I started typing out some lore about how mutable AtomicRefCell borrows are actually cheaper than immutable ones, so we should prefer them where possible. But then I decided that this was a really dumb state of affairs and that we should just fix AtomicRefCell instead, and implement a proper AtomicRef{,Mut}::map while we were at it. So here we are.
This PR adds a from-scratch implementation of AtomicRefCell that aims to be 100% sound, even in unrealistic overflow scenarios. We should probably get this on crates.io eventually, but I want to land it landed in-tree first.
With this implementation, each operation (borrow or release) is one atomic instruction, and all borrow/release pairs (mutable or immutable) take 12 ns on my machine, which is what I'd expect. This is a 50% improvement over the previous implementation in the immutable case.
There may be some places where we could get away with Ordering::Release instead of Ordering::AcqRel, but it didn't seem worth it to try to reason it out.
r? @Manishearth
CC @emilio @SimonSapin @heycam @upsuper
[1] https://bugzilla.mozilla.org/show_bug.cgi?id=1298588
Source-Repo: https://github.com/servo/servo
Source-Revision: 57b2c2609eb05ab06291137904703565a25a1cca
This adds the ` --nocapture` argument to the test-unit mach command.
Defaulting to false, when given it passes `-- --nocapture` to cargo test to show stdout during test-unit runs.
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#14595
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 955e2851bf715f2d7ec7898fdf9730b24fe69115
<!-- Please describe your changes on the following line: -->
I'd missed something in #14817, which now prevents us from running `./mach run -r -b`. @UK992 pointed this in the PR, but it got merged soon 😐
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
<!-- Either: -->
- [x] These changes do not require tests because it's a fix for mach
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 128aac921f4373b618418125ea6f7c6ac3797181
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#14742
<!-- Either: -->
- [x] There are tests for these changes
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 987b640c54c86c020dc4948be2a41fd58e8ade02
Remove a little bit useless call to map() in constellation.rs :)
Context: https://github.com/servo/servo/pull/14724/files#r94317893
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix [this remark](https://github.com/servo/servo/pull/14724/files#r94317893)
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because these are minor changes
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: b65eefe7d2f3a46e03c1c3ef6d893f8e3200ae77
<!-- Please describe your changes on the following line: -->
Move get_browserhtml_path to command_base
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14815 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X] These changes do not require tests because removing the duplicate code doesn't affect the behavior itself
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 2bf71800ef82ed0dad8668bad6f506d3744f1833
<s>**This is not ready to land** since there is no corresponding Nightly build of Rust yet.</s> Update: we got a Nightly build on 2016-12-29: http://rusty-dash.com/nightlies
I made these changes to check that https://github.com/rust-lang/rust/pull/38566 fixes https://github.com/rust-lang/rust/issues/38535 (which it does, yay!) so I might as well publish them, we’ll need them soon enough.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 9bdd0f401a89398fb2ecd4f6b54691a7c93b2e53
Follow up to #14802.
r? @emilio
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [ ] `./mach build -d` does not report any errors
- [ ] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 32eca899e6784a5ae440b2544a1b92bb238a7406
<!-- Please describe your changes on the following line: -->
The definition of `StyleComplexColor` in the Gecko side was updated in [bug 1063162](https://bugzilla.mozilla.org/show_bug.cgi?id=1063162). The helper functions need update as well.
r? @Manishearth
Source-Repo: https://github.com/servo/servo
Source-Revision: bbe70c7c5f07a67c48523221cb5d9ba12cbb2151
<!-- Please describe your changes on the following line: -->
Hi there,
This PR replaces `match` statements by `if let` when possible.
Thanks for reviewing
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14788
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X] These changes do not require tests because this PR is a code cleanup patch.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: d967d89fc081ae0f48850f3e29e4a9848bd837c7
Improves a conformance test that tried passing in desktop GL enums for
blending.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [x] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: b29b33c84c366e38bbb0d2e887469f814bc4d876
<!-- Please describe your changes on the following line: -->
Overflow does not behave like a normal shorthand. CSS-wide keywords were handled in their `to_css_declared` method. So I had to bypass this check to make it work.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14752 (github issue number if applicable).
<!-- Either: -->
- [X] There are tests for these changes
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 62ff467be855f222829ec961a104a0fdd3e083b0
Style no forced docs for the properties code and similar, but I ran out of time, and I think it's a nice improvement.
I'd appreciate a fast-ish turn-around time because this is pretty much prone to bitrot.
Source-Repo: https://github.com/servo/servo
Source-Revision: bd67163438317daa711b2411ce302aaf5bf4136a
This fixes `rowspan="0"` to behave as described in [the HTML spec](https://html.spec.whatwg.org/multipage/tables.html#attributes-common-to-td-and-th-elements):
> For this attribute, the value zero means that the cell is to span all the remaining rows in the row group.
It also prevents any `rowspan` from overlapping into another rowgroup, as required by [HTML § 4.9.12](https://html.spec.whatwg.org/multipage/tables.html#table-processing-model):
> Row groups cannot overlap each other. Similarly, column groups cannot overlap each other. A cell cannot cover slots that are from two or more row groups.
r? @notriddle or @pcwalton
---
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
- [x] There are tests for these changes OR
- [ ] These changes do not require tests because _____
Source-Repo: https://github.com/servo/servo
Source-Revision: c2ac495188efb5d2af75a0158a5f72614d5f6062
Refactored HSTSList to use HashMap, where the key of HashMap is the base domain. Every time when we check if a host is secure, we find the base domain of the host and get a vector of HSTS entries associated with the base domain.
While this will not give O(1) look up time, we would have a smaller list to iterate for every lookup. I have added one unit test to validate `HashMap` changes.
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14756
<!-- Either: -->
- [X] There are tests for these changes OR
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: b06f4aec67ff93b1d667a5817084b0952e56664e
This is necessary for the upcoming work in Stylo, given I plan to make MediaType
different for Servo and Gecko, and the Unknown variant doesn't fit in MediaType
to be fair, the device is never going to have any unknown media type.
Source-Repo: https://github.com/servo/servo
Source-Revision: d3875f6ec52fdb6bbe49719af6bff299c792ae0b
0.1.4 is known to be broken on Windows, and earlier version may not work properly in various platforms.
r? @emilio
Source-Repo: https://github.com/servo/servo
Source-Revision: ab623de2617c5a5414f4a0ac7cd66627214f82d5
Implemented step nine of the main fetch. If current URL scheme is 'HTTP' and
current URL's host is domain and if current URL's host matched with Known
HSTS Host Domain Name Matching results in either a superdomain match with
an asserted includeSubDomains directive or a congruent match then we
change request scheme to 'https'. This change has been made in method.rs
A test case to validate this has been added in fetch.rs. For asserting
https scheme, a https localhost was required. For this purpose I have
created a self-signed certificate and refactored fetch-context and
connector.rs to programmatically trust this certificate for running this
test case.
This should fix https://github.com/servo/servo/issues/14363
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14363
<!-- Either: -->
- [X] There are tests for these changes
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: c7991d596f7453d09c2b2a98eecce72f182a4e24
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because it is just a trivial change for stylo only
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 49bdef98bff28771b189073f5f0d487fe9529b86
<!-- Please describe your changes on the following line: -->
Correctly handled error when Canvas doesn't close properly, with a descriptive warning.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14002 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X] These changes do not require tests because minor changes don't require tests.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: c6ea1ec91f4a0b79b4fcdfa05a9b492fa6c9a798
Changed links from https://domparsing.spec.whatwg.org/ to
https://w3c.github.io/DOM-Parsing/.
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14758
<!-- Either: -->
- [X] These changes do not require tests because these are link update
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 149facbb3c6da82d445aa29b694097d451711bbb
<!-- Please describe your changes on the following line: -->
Reverse linear gradient direction if not explicitly specified to match expected default behavior
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#14745 (github issue number if applicable).
<!-- Either: -->
- [x] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: adb3e12b72a3d11cbe0973321cbe8009c2555c7a
<!-- Please describe your changes on the following line: -➜
Replaced existing code for handling `BinaryType::Arraybuffer` from `JS_NewArrayBuffer` to `Uint8Array::create`.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14675 (github issue number if applicable).
<!-- Either: -->
- [X] These changes do not require tests because they replace an existing implementation
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
I am not certain the test suite will adequately verify my implementation as I am not familiar with the architecture. It compiles and passes the current tests.
Source-Repo: https://github.com/servo/servo
Source-Revision: 0f600db3ae5f1464b5d8fed169e6d50974715013
<!-- Please describe your changes on the following line: -->
`VSInstallDir` exists only when Visual Studio is installed.
`VS140COMNTOOLS` is defined by installing either Visual Studio or [Visual C++ Build Tools](http://landinghub.visualstudio.com/visual-cpp-build-tools)
It will allow to build MSVC based Servo without having to install whole Visual Studio (few GiB).
EDIT: Another (maybe cleaner) solution would be reverting 63ec96a57d
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [ ] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because `VS140COMNTOOLS` variable is already used in [mach.bat](https://github.com/servo/servo/blob/master/mach.bat)
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 7f2da7483b2d0c71a227fb8707eea00b0602d977
This can avoid doing bindgen when build script is called for updating other files, e.g. properties.
This uses a global modified time, so there is a chance that some of the files which can be skipped but not skipped. But given that we do all three files in parallel, that would unlikely affect the actual runtime.
Using lots of `Mutex` could be an issue, but it doesn't seem to be in practice. Since only one thread would hold the lock of `ADDED_PATHS`, there is never a competitor for the lock of `LAST_MODIFIED`.
r? @emilio
Source-Repo: https://github.com/servo/servo
Source-Revision: 9e0d269353d9380cb5cd12170679f2e82ab8c9f7
We need to clamp each interpolated values because some cubic-bezier functions
produce values that are out of range [0, 1].
r? @emilio
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
<!-- Either: -->
- [X] There are tests for these changes
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: f9d971771c62f244c338be1cb34e0aa191d64206
<!-- Please describe your changes on the following line: -->
This is a follow up for #13740, so r? @jdm
The first patch enables JSON serialization for flexbox flows, the second one fixed format incompatibilities for the layout viewer.
The 3rd and 4th patches are just layout viewer UI enhancements, we could split that to a spearate PR if you prefer.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#13846 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because it's a trivial debug tool
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 58fec2f05a21eb69899c8ec21e4b95000cfed2f2
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#14697
<!-- Either: -->
- [x] There are tests for these changes
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 7e3c9e21978b638b8f17192500251843f3743d1c
<!-- Please describe your changes on the following line: -->
Use typed array API in TextDecoder::Decode
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#14674
<!-- Either: -->
- [x] These changes do not require tests because no new methods were introduced
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: eb64edec848f570bc89ac87cb185ecd87c16e005
<!-- Please describe your changes on the following line: -->
Move frame from constellation
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14691 (github issue number if applicable).
<!-- Either: -->
- [X] These changes do not require tests
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 93e3c3f4241d09521005725699cf1ed1e2ba8f46
<!-- Please describe your changes on the following line: -->
To be able to add glue for these properties, we needed to change their structs. They are moved from effects to box and added stylo glue.
This PR covers these properties:
- perspective
- perspective-origin
- backface-visibility
- transform-box
- transform-style
- transform-origin
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
<!-- Either: -->
- [X] These changes do not require tests because they are stylo changes
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: a6d206eb6687da31c957094bbed380c9e47daac4
This is part of the fix for #11297. This PR fixes the inline layout of table cells impacted by row-spanning cells from previous rows. A separate PR to follow will fix the table block size calculations to account for rowspan.
This PR doesn't yet include any test changes. If it doesn't cause any existing tests to pass, I will add a new test to it.
r? @pcwalton
Source-Repo: https://github.com/servo/servo
Source-Revision: 9d320d5a34fe9911266940eb1ce96204d345b678
<!-- Please describe your changes on the following line: -->
r? @Wafflespeanut
cc @SimonSapin
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14695
<!-- Either: -->
- [X] There are tests for these changes
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 37a5e29147f0dc489888377d6f7bb53282dc04f9
<!-- Please describe your changes on the following line: -->
Move reg_host from the constellation to net_traits
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14696 (github issue number if applicable).
<!-- Either: -->
- [X] These changes do not require tests
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: c2448d3963508777f1a7485492ec5e9677c875c8
<!-- Please describe your changes on the following line: -->
Rewrite Crypto::GetRandomValues to use typed array API
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [X] These changes fix#14673 (github issue number if applicable).
<!-- Either: -->
- [X] There are tests for these changes
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 1c60a5bef84a709491882e22d4e3393de062dea9
<!-- Please describe your changes on the following line: -->
`unset` keyword value should *not* be converted to something else during parsing. It is a specified-value time value, which should be preserved until computation.
WIP patch for seeing what tests would be broken and / or if there is necessary to add any new test.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [x] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 4cd7321531a95ca2d9a1b4d5e04e3fdb35b03f56
I just noticed one while writing #14719, and then grepped and couldn't stop.
r? @nox
Source-Repo: https://github.com/servo/servo
Source-Revision: 7fc9047d22147cf419d2551350421e23105e6f0e
<!-- Please describe your changes on the following line: -->
Remove azure (canvas crate) dependency from canvas_traits crate.
There might be some tests that are failing due to changed implementation location. I will take a look at this pull request build status.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#14108
<!-- Either: -->
- [x] These changes do not require tests because no methods were modified or moved
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 32281030149a9e40d46310de0025a8f522798f21
<!-- Please describe your changes on the following line: -->
Remove unused `FrameChange::document_ready` field and remove unused boolean in `ConstellationMsg::GetPipeline`'s second argument.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#14693
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because compiler validates the field is not used anywhere
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 61d8f4d6883a876fae81bede4dfedacc764ba2f2
* Also adds a new helper, `ServoUrl::is_secure_scheme`.
* Refactored `CookieStorage::push` and `CookieStorage::remove` to use the new helper.
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [x] These changes fix#14702
<!-- Either: -->
- [X] These changes do not require tests because we can't test the changes yet.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: fcc3447dfc63571a51abe94ad27a21961d8ede4b
<!-- Please describe your changes on the following line: -->
r? @Manishearth
Source-Repo: https://github.com/servo/servo
Source-Revision: 75b3d68fa74ae1b9a090a6dc13dec3b8dca67b89
<!-- Please describe your changes on the following line: -->
Rewrote the documentation comments for `pipeline.rs`.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes do not require tests because it's just documentation
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 4cb781a0a298637ce9eca6aed57bcc687c846c35
<!-- Please describe your changes on the following line: -->
Update of the "how to replace a dependency" part of "Hacking Servo".
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#14688 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because it only affects documentation.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 3256af1ba0790394b736f486b7e1362c939afb2a
The structures have changed, as has the syntax of the Rust language.
Source-Repo: https://github.com/servo/servo
Source-Revision: f850918d8ef07426b55e8a7cdebbf43c56c65589
<!-- Please describe your changes on the following line: -->
Rewrote the documentation comments for `constellation.rs`.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes do not require tests because it's just documentation
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 02717931ad45c5ac9780edb1504bafd38039a671
<!-- Please describe your changes on the following line: -->
Add check for bad ports to http_fetch(), return NetworkError::Internal if bad port/schema combination is seen.
Test added
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#14514 (github issue number if applicable).
<!-- Either: -->
- [x] There are tests for these changes OR
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: de7d73adb0a51627e4aaa568787fe36c22029bd3
Turn a panic into a warning for a situation that is easy to hit in web content.
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14677
- [X] There are tests for these changes
Source-Repo: https://github.com/servo/servo
Source-Revision: f0a74ee0d2048242a480254bd525e730707973c0
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 40527441395622dff6b970d6ff1f9f6503f54567
With this PR, the only remaining usage of UnsafeNode is the transition stuff, which is servo-only and probably going to be rewritten over the course of stylo. The parallel traversal is now fully typechecked and safe. \o/
r? @emilio
Source-Repo: https://github.com/servo/servo
Source-Revision: b35ab98132539d4e6f1fcd4b3307eae40e387861
<!-- Please describe your changes on the following line: -->
Fixup for #14651. r? @larsbergstrom
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [ ] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because these builders aren't used yet
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 5573f7cea3cc24e76501a05ff94b59c870ce7b82
r? @metajack @edunham
The idea here is that I'm adding `-gnu` and `-msvc` variants in advance of the buildbot changes (in https://github.com/servo/saltfs/pull/491). Once those land and are pushed out to the buildbot master, it'll pick up these changed files and then we can remove the unsuffixed `windows-dev` and `windows-nightly`.
Source-Repo: https://github.com/servo/servo
Source-Revision: 25f32c4513a9d7c3514c4079eef35b1cc5c6b286
<!-- Please describe your changes on the following line: -->
Added the missing [Step 5.2.3](https://github.com/servo/servo/compare/master...szeged:connect-disconnect-update#diff-1dbe29f87740f5aec93f37adbecace6cR213) to the `connect` function.
Updated the [disconnect](https://webbluetoothcg.github.io/web-bluetooth/#dom-bluetoothremotegattserver-disconnect) function to its current state in the specification, including the `clean_up_disconnected_device` and the `garbage_collect_the connection` functions.
Added new tests for checking the invalid state of JS objects after disconnection.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] There are tests for these changes
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 23590f683a06b67f666e83009513b67ed8225ce7
This is no longer used since one of @bholley's patches to the style system.
Source-Repo: https://github.com/servo/servo
Source-Revision: b843be49752c68926521a8b5f6b0405b1ff01e9b
<!-- Please describe your changes on the following line: -->
https://developer.mozilla.org/en-US/docs/Web/CSS/-moz-orient
![2016-12-21-213132_1342x870_scrot](https://cloud.githubusercontent.com/assets/1716173/21405334/c6c49cb2-c7c5-11e6-85d7-e10f71c331ef.png)
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14198 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X] These changes do not require tests because it's a style addition
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 641010eed8b9fde014806c02311cb95f9aa4fb1c