nsRange::DoSetRange() adds/remove its root to/from mutation observer, initializes common ancestor, registers itself to the common ancestor, unregisters itself from old common ancestor, and notifies selection listeners of selection change.
However, those runtime cost is expensive but on the other hand, a lot of callers set both start and end of the range and that causes calling DoSetRange() twice.
This patch renames Set() to SetStartAndEnd() for easier to understand the meaning and make it call DoSetRange() only once.
MozReview-Commit-ID: FRV55tuBAgg
--HG--
extra : rebase_source : 67adf929cf119e2425f7d3741651217522094590
When we send out a prefetch request, we act as if the load came
from one of the possibly many documents containing <link> element
for the given URL. The docgroup assigned to this request is
derived from this document. Later, when the load finishes, the
OnStopRequest code runs in a runnable labeled with this
docgroup. OnStopRequest dispatches a load event to *all* the link
elements, including some that might be in different docgroups
from the OnStopRequest runnable. This generates an assertion.
To fix this, I decided to dispatch the load events
asynchronously. I'm hoping the extra round trip through the event
loop shouldn't hurt us too much since I doubt anyone actually
listens for these events.
MozReview-Commit-ID: FTkjuHO7RFp
When we send out a prefetch request, we act as if the load came
from one of the possibly many documents containing <link> element
for the given URL. The docgroup assigned to this request is
derived from this document. Later, when the load finishes, the
OnStopRequest code runs in a runnable labeled with this
docgroup. OnStopRequest dispatches a load event to *all* the link
elements, including some that might be in different docgroups
from the OnStopRequest runnable. This generates an assertion.
To fix this, I decided to dispatch the load events
asynchronously. I'm hoping the extra round trip through the event
loop shouldn't hurt us too much since I doubt anyone actually
listens for these events.
MozReview-Commit-ID: FTkjuHO7RFp
IMEStateManager should cache nsIWidget for sPresContext at caching sPresContext. Then, even if sPresContext has gone, IMEStateManager can clean up with the nsIWidget cache.
Unfortunately, editor has some bugs about calling IMEStateManager::UpdateIMEState(). That is, calling it *before* IMEStateManager::OnFocusChange(). In such case, this patch makes UpdateIMEState() ignore the call.
MozReview-Commit-ID: 1cydI03WyB8
This avoids conflicts with mozilla::dom::FrameType.
MozReview-Commit-ID: 7aEMbHRaTFk
--HG--
extra : rebase_source : 2d01321f5ce0ec8c0e3f70984674f82678034b3c
This commit adds a telemetry probe to determine the percentage of pages
that ever have a 'mousemove' event listener added to the DOM. This is for
determining how often APZ key scrolling could handle interleaved mousemove
events.
A flag is added to nsPIDOMWindow to track whether a qualifying event
listener was ever added to the DOM for this window, and is updated by
EventListenerManager. There are several other similar flags to this.
The probe is reported in nsGlobalWindow::FreeInnerObjects() so that it
can be compared exactly with the non-passive keyboard listener APZ probe.
MozReview-Commit-ID: DqqCfrdRCGp
--HG--
extra : rebase_source : fad8159c28b587572a4191f7cbde1e97e166639c
This commit adds a telemetry probe to track the percentage of pages that ever
have a non-passive 'keydown' or 'keypress' event that could preventDefault()
APZ key scrolling of the root of a page.
A flag is added to each EventListenerManager to track whether it ever had
a qualifying event listener, and then in nsGlobalWindow::FreeInnerObjects()
the event targets that could preventDefault() a scroll are checked for this
flag. This check is done at nsGlobalWindow::FreeInnerObjects() so that the
DOM is still alive.
MozReview-Commit-ID: EkK3vxehZA5
--HG--
extra : rebase_source : 4642189d0065254cf74dfe8475403f0bf8210bca
Because ProfilerMarkerPayload is the main type defined in these files, and
because the next patch is going to introduce ProfilerMarker.{h,cpp}, which
would be confusingly similar to the old names.
--HG--
rename : tools/profiler/core/ProfilerMarkers.cpp => tools/profiler/core/ProfilerMarkerPayload.cpp
rename : tools/profiler/public/ProfilerMarkers.h => tools/profiler/public/ProfilerMarkerPayload.h
extra : rebase_source : df22a2ab3867650348ae78fe959ff0366aff230b
Other browsers do not support any of these (IIRC), telemetry reports
essentially zero usage, and supporting them is contrary to the DOM spec.
Notes on specific events:
CommandEvent and SimpleGestureEvent: These are not supposed to be
web-exposed APIs, so I hid the interfaces from web content too
(necessary to avoid test_all_synthetic_events.html failures).
DataContainerEvent: This was a non-standard substitute for CustomEvent
that seemed to have only one user, so I removed it entirely and switched
the user (MozillaFileLogger.js) to CustomEvent.
ScrollAreaEvent: This is entirely non-standard, but we apparently expose
it deliberately to web content, so I didn't see any reason to remove it
from createEvent.
SimpleGestureEvent and XULCommandEvent: Can still be created from
createEvent(), but not by content.
TimeEvent: This is still in because it has no constructor, so there's no
other way to create it. Ideally we'd update the SMIL spec to add a
constructor. I did remove TimeEvents.
MozReview-Commit-ID: 7Yi2oCl9SM2
--HG--
extra : rebase_source : 199ab921acfc531b8b85e77f90fcd799b03c887b
IMEContentObserver can store pointer of IMENotificationRequests of its mWidget. Therefore, it can check the requests dynamically when it receives content change or layout change.
This patch makes IMEContentObserver stores IMENotificationRequests as pointer and check it at every change notification received. Additionally, notification request may be changed due to focus move or something. Therefore, this patch makes IMEContentObserver and IMEContentObserver::IMENotificationSender() check if the notifications are still necessary.
MozReview-Commit-ID: 2uU2wN15D8v
--HG--
extra : rebase_source : 6086e0293343632df43087c767ad00521e764476
IMEContentObserver may need to change notifications to send when TextInputProcessor begins input transaction. In current design, IMEContentObserver needs to retrieve IMENotificationRequests at every change. However, if nsIWidget returns a reference to its IMENotificationRequests, IMEContentObserver can call it only once.
For that purpose, this patch changes nsIWidget::GetIMENotificationRequests() to nsIWidget::IMENotificationRequestsRef() and make it return |const IMENotificationRequests&|. However, if the lifetime of the instance of IMENotificationRequest is shorter than the widget instance's, it's dangerous. Therefore, it always returns TextEventDispatcher::mIMENotificationRequests. TextEventDispatcher's lifetime is longer than the widget. Therefore, this guarantees the lifetime.
On the other hand, widget needs to update TextEventDispatcher::mIMENotificationRequests before calls of nsIWidget::IMENotificationRequestsRef(). Therefore, this patch makes TextEventDispatcher update proper IMENotificationRequests when it gets focus or starts new input transaction and clear mIMENotificationRequests when it loses focus.
Note that TextEventDispatcher gets proper requests both from native text event dispatcher listener (typically, implemented by native IME handler class) and TextInputProcessor when TextInputProcessor has input transaction because even if TextInputProcessor overrides native IME, native IME still needs to know the content changes since they may get new input transaction after that.
However, there may not be native IME handler in content process. If it runs in Android, PuppetWidget may have native IME handler because widget directly handles IME in e10s mode for Android. Otherwise, native IME handler is in its parent process. So, if TextInputHandler has input transaction in content process, PuppetWidget needs to behave as native event handler. Therefore, this patch makes PuppetWidget inherit TextEventDispatcherListener and implements PuppetWidget::IMENotificationRequestsRef().
MozReview-Commit-ID: 2SW3moONTOX
--HG--
extra : rebase_source : d2634ada6c33dbf7a966fadb68608411ee24bfab
Everything depending on the widget being gonk can go away, as well as
everything depending on MOZ_AUDIO_CHANNEL_MANAGER, which was only
defined on gonk builds under b2g/ (which goes away in bug 1357326).
--HG--
extra : rebase_source : 9f0aeeb7eea8417fa4e06d662d566d67ecaf2a24
When the dom.w3c_touch_events.enabled pref is set to "2" (autodetect) on Win/Linux,
it checks to see if the hardware supports touch events, and only enables the
DOM touch APIs if so. However, even if the hardware supports touch events, we
might have e10s or APZ disabled for other reasons, and in those cases we don't
actually turn on touch support in the widget (nsBaseWidget::RegisterTouchWindow
will not be called). So in those cases the widget will never actually dispatch
touch events, and the DOM touch APIs shouldn't be exposed either. This patch
implements this by checking the APZ state when deciding whether or not to
expose the DOM touch APIs.
MozReview-Commit-ID: EIvJh030b0X
To run JS in separate cooperative threads, we need to split up per-thread state
from per-runtime state. This patch does that for XPConnect.
MozReview-Commit-ID: 407SlJ7nR6v
