/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ /* * The contents of this file are subject to the Mozilla Public * License Version 1.1 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.mozilla.org/MPL/ * * Software distributed under the License is distributed on an "AS * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or * implied. See the License for the specific language governing * rights and limitations under the License. * * The Original Code is the Netscape Portable Runtime (NSPR). * * The Initial Developer of the Original Code is Netscape * Communications Corporation. Portions created by Netscape are * Copyright (C) 1998-2000 Netscape Communications Corporation. All * Rights Reserved. * * Contributor(s): * * Alternatively, the contents of this file may be used under the * terms of the GNU General Public License Version 2 or later (the * "GPL"), in which case the provisions of the GPL are applicable * instead of those above. If you wish to allow use of your * version of this file only under the terms of the GPL and not to * allow others to use your version of this file under the MPL, * indicate your decision by deleting the provisions above and * replace them with the notice and other provisions required by * the GPL. If you do not delete the provisions above, a recipient * may use your version of this file under either the MPL or the * GPL. */ #ifndef prtrace_h___ #define prtrace_h___ /* ** prtrace.h -- NSPR's Trace Facility. ** ** The Trace Facility provides a means to trace application ** program events within a process. When implementing an ** application program an engineer may insert a "Trace" function ** call, passing arguments to be traced. The "Trace" function ** combines the user trace data with identifying data and ** writes this data in time ordered sequence into a circular ** in-memory buffer; when the buffer fills, it wraps. ** ** Functions are provided to set and/or re-configure the size of ** the trace buffer, control what events are recorded in the ** buffer, enable and disable tracing based on specific user ** supplied data and other control functions. Methods are provided ** to record the trace entries in the in-memory trace buffer to ** a file. ** ** Tracing may cause a performance degredation to the application ** depending on the number and placement of calls to the tracing ** facility. When tracing is compiled in and all tracing is ** disabled via the runtime controls, the overhead should be ** minimal. ... Famous last words, eh? ** ** When DEBUG is defined at compile time, the Trace Facility is ** compiled as part of NSPR and any application using NSPR's ** header files will have tracing compiled in. When DEBUG is not ** defined, the Trace Facility is not compiled into NSPR nor ** exported in its header files. If the Trace Facility is ** desired in a non-debug build, then FORCE_NSPR_TRACE may be ** defined at compile time for both the optimized build of NSPR ** and the application. NSPR and any application using NSPR's ** Trace Facility must be compiled with the same level of trace ** conditioning or unresolved references may be realized at link ** time. ** ** For any of the Trace Facility methods that requires a trace ** handle as an input argument, the caller must ensure that the ** trace handle argument is valid. An invalid trace handle ** argument may cause unpredictable results. ** ** Trace Facility methods are thread-safe and SMP safe. ** ** Users of the Trace Facility should use the defined macros to ** invoke trace methods, not the function calls directly. e.g. ** PR_TRACE( h1,0,1,2, ...); not PR_Trace(h1,0,1,2, ...); ** ** Application designers should be aware of the effects of ** debug and optimized build differences when using result of the ** Trace Facility macros in expressions. ** ** See Also: prcountr.h ** ** /lth. 08-Jun-1998. */ #include "prtypes.h" #include "prthread.h" #include "prtime.h" PR_BEGIN_EXTERN_C /* ** Opaque type for the trace handle ** ... Don't even think about looking in here. ** */ typedef void * PRTraceHandle; /* ** PRTraceEntry -- A trace entry in the in-memory trace buffer ** looks like this. ** */ typedef struct PRTraceEntry { PRThread *thread; /* The thread creating the trace entry */ PRTraceHandle handle; /* PRTraceHandle creating the trace entry */ PRTime time; /* Value of PR_Now() at time of trace entry */ PRUint32 userData[8]; /* user supplied trace data */ } PRTraceEntry; /* ** PRTraceOption -- command operands to ** PR_[Set|Get]TraceOption(). See descriptive meanings there. ** */ typedef enum PRTraceOption { PRTraceBufSize, PRTraceEnable, PRTraceDisable, PRTraceSuspend, PRTraceResume, PRTraceSuspendRecording, PRTraceResumeRecording, PRTraceLockHandles, PRTraceUnLockHandles, PRTraceStopRecording } PRTraceOption; /* ----------------------------------------------------------------------- ** FUNCTION: PR_DEFINE_TRACE() -- Define a PRTraceHandle ** ** DESCRIPTION: PR_DEFINE_TRACE() is used to define a trace ** handle. ** */ #define PR_DEFINE_TRACE(name) PRTraceHandle name /* ----------------------------------------------------------------------- ** FUNCTION: PR_INIT_TRACE_HANDLE() -- Set the value of a PRTraceHandle ** ** DESCRIPTION: ** PR_INIT_TRACE_HANDLE() sets the value of a PRTraceHandle ** to value. e.g. PR_INIT_TRACE_HANDLE( myHandle, NULL ); ** */ #if defined (DEBUG) || defined (FORCE_NSPR_TRACE) #define PR_INIT_TRACE_HANDLE(handle,value)\ (handle) = (PRCounterHandle)(value) #else #define PR_INIT_TRACE_HANDLE(handle,value) #endif /* ----------------------------------------------------------------------- ** FUNCTION: PR_CreateTrace() -- Create a trace handle ** ** DESCRIPTION: ** PR_CreateTrace() creates a new trace handle. Tracing is ** enabled for this handle when it is created. The trace handle ** is intended for use in other Trace Facility calls. ** ** PR_CreateTrace() registers the QName, RName and description ** data so that this data can be retrieved later. ** ** INPUTS: ** qName: pointer to string. QName for this trace handle. ** ** rName: pointer to string. RName for this trace handle. ** ** description: pointer to string. Descriptive data about this ** trace handle. ** ** OUTPUTS: ** Creates the trace handle. ** Registers the QName and RName with the trace facility. ** ** RETURNS: ** PRTraceHandle ** ** RESTRICTIONS: ** qName is limited to 31 characters. ** rName is limited to 31 characters. ** description is limited to 255 characters. ** */ #define PRTRACE_NAME_MAX 31 #define PRTRACE_DESC_MAX 255 #if defined (DEBUG) || defined (FORCE_NSPR_TRACE) #define PR_CREATE_TRACE(handle,qName,rName,description)\ (handle) = PR_CreateTrace((qName),(rName),(description)) #else #define PR_CREATE_TRACE(handle,qName,rName,description) #endif NSPR_API(PRTraceHandle) PR_CreateTrace( const char *qName, /* QName for this trace handle */ const char *rName, /* RName for this trace handle */ const char *description /* description for this trace handle */ ); /* ----------------------------------------------------------------------- ** FUNCTION: PR_DestroyTrace() -- Destroy a trace handle ** ** DESCRIPTION: ** PR_DestroyTrace() removes the referenced trace handle and ** associated QName, RName and description data from the Trace ** Facility. ** ** INPUTS: handle. A PRTraceHandle ** ** OUTPUTS: ** The trace handle is unregistered. ** The QName, RName and description are removed. ** ** RETURNS: void ** ** RESTRICTIONS: ** */ #if defined (DEBUG) || defined (FORCE_NSPR_TRACE) #define PR_DESTROY_TRACE(handle)\ PR_DestroyTrace((handle)) #else #define PR_DESTROY_TRACE(handle) #endif NSPR_API(void) PR_DestroyTrace( PRTraceHandle handle /* Handle to be destroyed */ ); /* ----------------------------------------------------------------------- ** FUNCTION: PR_Trace() -- Make a trace entry in the in-memory trace ** ** DESCRIPTION: ** PR_Trace() makes an entry in the in-memory trace buffer for ** the referenced trace handle. The next logically available ** PRTraceEntry is used; when the next trace entry would overflow ** the trace table, the table wraps. ** ** PR_Trace() for a specific trace handle may be disabled by ** calling PR_SetTraceOption() specifying PRTraceDisable for the ** trace handle to be disabled. ** ** INPUTS: ** handle: PRTraceHandle. The trace handle for this trace. ** ** userData[0..7]: unsigned 32bit integers. user supplied data ** that is copied into the PRTraceEntry ** ** OUTPUTS: ** A PRTraceEntry is (conditionally) formatted in the in-memory ** trace buffer. ** ** RETURNS: void. ** ** RESTRICTIONS: ** */ #if defined (DEBUG) || defined (FORCE_NSPR_TRACE) #define PR_TRACE(handle,ud0,ud1,ud2,ud3,ud4,ud5,ud6,ud7)\ PR_Trace((handle),(ud0),(ud1),(ud2),(ud3),(ud4),(ud5),(ud6),(ud7)) #else #define PR_TRACE(handle,ud0,ud1,ud2,ud3,ud4,ud5,ud6,ud7) #endif NSPR_API(void) PR_Trace( PRTraceHandle handle, /* use this trace handle */ PRUint32 userData0, /* User supplied data word 0 */ PRUint32 userData1, /* User supplied data word 1 */ PRUint32 userData2, /* User supplied data word 2 */ PRUint32 userData3, /* User supplied data word 3 */ PRUint32 userData4, /* User supplied data word 4 */ PRUint32 userData5, /* User supplied data word 5 */ PRUint32 userData6, /* User supplied data word 6 */ PRUint32 userData7 /* User supplied data word 7 */ ); /* ----------------------------------------------------------------------- ** FUNCTION: PR_SetTraceOption() -- Control the Trace Facility ** ** DESCRIPTION: ** PR_SetTraceOption() controls the Trace Facility. Depending on ** command and value, attributes of the Trace Facility may be ** changed. ** ** INPUTS: ** command: An enumerated value in the set of PRTraceOption. ** value: pointer to the data to be set. Type of the data is ** dependent on command; for each value of command, the type ** and meaning of dereferenced value is shown. ** ** PRTraceBufSize: unsigned long: the size of the trace buffer, ** in bytes. ** ** PRTraceEnable: PRTraceHandle. The trace handle to be ** enabled. ** ** PRTraceDisable: PRTraceHandle. The trace handle to be ** disabled. ** ** PRTraceSuspend: void. value must be NULL. All tracing is ** suspended. ** ** PRTraceResume: void. value must be NULL. Tracing for all ** previously enabled, prior to a PRTraceSuspend, is resumed. ** ** PRTraceStopRecording: void. value must be NULL. If recording ** (see: ** PR_RecordTraceEntries()) is being done, ** PRTraceStopRecording causes PR_RecordTraceEntries() to return ** to its caller. If recording is not being done, this function ** has no effect. ** ** PRTraceSuspendRecording: void. Must be NULL. If recording is ** being done, PRTraceSuspendRecording causes further writes to ** the trace file to be suspended. Data in the in-memory ** trace buffer that would ordinarily be written to the ** trace file will not be written. Trace entries will continue ** to be entered in the in-memory buffer. If the Trace Facility ** recording is already in a suspended state, the call has no ** effect. ** ** PRTraceResumeRecording: void. value must be NULL. If ** recording for the Trace Facility has been previously been ** suspended, this causes recording to resume. Recording resumes ** with the next in-memory buffer segment that would be written ** if trace recording had not been suspended. If recording is ** not currently suspended, the call has no effect. ** ** PRTraceLockHandles: void. value must be NULL. Locks the ** trace handle lock. While the trace handle lock is held, ** calls to PR_CreateTrace() will block until the lock is ** released. ** ** PRTraceUnlockHandles: void. value must be NULL. Unlocks the ** trace handle lock. ** ** OUTPUTS: ** The operation of the Trace Facility may be changed. ** ** RETURNS: void ** ** RESTRICTIONS: ** */ #if defined (DEBUG) || defined (FORCE_NSPR_TRACE) #define PR_SET_TRACE_OPTION(command,value)\ PR_SetTraceOption((command),(value)) #else #define PR_SET_TRACE_OPTION(command,value) #endif NSPR_API(void) PR_SetTraceOption( PRTraceOption command, /* One of the enumerated values */ void *value /* command value or NULL */ ); /* ----------------------------------------------------------------------- ** FUNCTION: PR_GetTraceOption() -- Retrieve settings from the Trace Facility ** ** DESCRIPTION: ** PR_GetTraceOption() retrieves the current setting of the ** Trace Facility control depending on command. ** ** ** PRTraceBufSize: unsigned long: the size of the trace buffer, ** in bytes. ** ** ** INPUTS: ** command: one of the enumerated values in PRTraceOptions ** valid for PR_GetTraceOption(). ** ** OUTPUTS: ** dependent on command. ** ** RETURNS: void ** ** RESTRICTIONS: ** */ #if defined (DEBUG) || defined (FORCE_NSPR_TRACE) #define PR_GET_TRACE_OPTION(command,value)\ PR_GetTraceOption((command),(value)) #else #define PR_GET_TRACE_OPTION(command,value) #endif NSPR_API(void) PR_GetTraceOption( PRTraceOption command, /* One of the enumerated values */ void *value /* command value or NULL */ ); /* ----------------------------------------------------------------------- ** FUNCTION: PR_GetTraceHandleFromName() -- Retrieve an existing ** handle by name. ** ** DESCRIPTION: ** PR_GetTraceHandleFromName() retreives an existing tracehandle ** using the name specified by qName and rName. ** ** INPUTS: ** qName: pointer to string. QName for this trace handle. ** ** rName: pointer to string. RName for this trace handle. ** ** ** OUTPUTS: returned. ** ** RETURNS: ** PRTraceHandle associated with qName and rName or NULL when ** there is no match. ** ** RESTRICTIONS: ** */ #if defined (DEBUG) || defined (FORCE_NSPR_TRACE) #define PR_GET_TRACE_HANDLE_FROM_NAME(handle,qName,rName)\ (handle) = PR_GetTraceHandleFromName((qName),(rName)) #else #define PR_GET_TRACE_HANDLE_FROM_NAME(handle,qName,rName) #endif NSPR_API(PRTraceHandle) PR_GetTraceHandleFromName( const char *qName, /* QName search argument */ const char *rName /* RName search argument */ ); /* ----------------------------------------------------------------------- ** FUNCTION: PR_GetTraceNameFromHandle() -- Retreive trace name ** by bandle. ** ** DESCRIPTION: ** PR_GetTraceNameFromHandle() retreives the existing qName, ** rName, and description for the referenced trace handle. ** ** INPUTS: handle: PRTraceHandle. ** ** OUTPUTS: pointers to the Trace Facility's copy of qName, ** rName and description. ... Don't mess with these values. ** They're mine. ** ** RETURNS: void ** ** RESTRICTIONS: ** */ #if defined (DEBUG) || defined (FORCE_NSPR_TRACE) #define PR_GET_TRACE_NAME_FROM_HANDLE(handle,qName,rName,description)\ PR_GetTraceNameFromHandle((handle),(qName),(rName),(description)) #else #define PR_GET_TRACE_NAME_FROM_HANDLE(handle,qName,rName,description) #endif NSPR_API(void) PR_GetTraceNameFromHandle( PRTraceHandle handle, /* handle as search argument */ const char **qName, /* pointer to associated QName */ const char **rName, /* pointer to associated RName */ const char **description /* pointer to associated description */ ); /* ----------------------------------------------------------------------- ** FUNCTION: PR_FindNextTraceQname() -- Retrieive a QName handle ** iterator. ** ** DESCRIPTION: ** PR_FindNextTraceQname() retreives the first or next trace ** QName handle, depending on the value of handle, from the trace ** database. The PRTraceHandle returned can be used as an ** iterator to traverse the QName handles in the Trace database. ** ** INPUTS: ** handle: When NULL, PR_FindNextQname() returns the first QName ** handle. When a handle is a valid PRTraceHandle previously ** retreived using PR_FindNextQname() the next QName handle is ** retreived. ** ** OUTPUTS: returned. ** ** RETURNS: ** PRTraceHandle or NULL when there are no trace handles. ** ** RESTRICTIONS: ** Iterating thru the trace handles via FindFirst/FindNext ** should be done under protection of the trace handle lock. ** See: PR_SetTraceOption( PRLockTraceHandles ). ** */ #if defined (DEBUG) || defined (FORCE_NSPR_TRACE) #define PR_FIND_NEXT_TRACE_QNAME(next,handle)\ (next) = PR_FindNextTraceQname((handle)) #else #define PR_FIND_NEXT_TRACE_QNAME(next,handle) #endif NSPR_API(PRTraceHandle) PR_FindNextTraceQname( PRTraceHandle handle ); /* ----------------------------------------------------------------------- ** FUNCTION: PR_FindNextTraceRname() -- Retrieive an RName handle ** iterator. ** ** DESCRIPTION: ** PR_FindNextTraceRname() retreives the first or next trace ** RName handle, depending on the value of handle, from the trace ** database. The PRTraceHandle returned can be used as an ** iterator to traverse the RName handles in the Trace database. ** ** INPUTS: ** rhandle: When NULL, PR_FindNextRname() returns the first ** RName handle. When a handle is a valid PRTraceHandle ** previously retreived using PR_FindNextRname() the next RName ** handle is retreived. ** qhandle: A valid PRTraceHandle retruned from a previous call ** to PR_FIND_NEXT_TRACE_QNAME(). ** ** OUTPUTS: returned. ** ** RETURNS: ** PRTraceHandle or NULL when there are no trace handles. ** ** RESTRICTIONS: ** Iterating thru the trace handles via FindNext should be done ** under protection of the trace handle lock. See: ( ** PR_SetTraceOption( PRLockTraceHandles ). ** */ #if defined (DEBUG) || defined (FORCE_NSPR_TRACE) #define PR_FIND_NEXT_TRACE_RNAME(next,rhandle,qhandle)\ (next) = PR_FindNextTraceRname((rhandle),(qhandle)) #else #define PR_FIND_NEXT_TRACE_RNAME(next,rhandle,qhandle) #endif NSPR_API(PRTraceHandle) PR_FindNextTraceRname( PRTraceHandle rhandle, PRTraceHandle qhandle ); /* ----------------------------------------------------------------------- ** FUNCTION: PR_RecordTraceEntries() -- Write trace entries to external media ** ** DESCRIPTION: ** PR_RecordTraceEntries() causes entries in the in-memory trace ** buffer to be written to external media. ** ** When PR_RecordTraceEntries() is called from an application ** thread, the function appears to block until another thread ** calls PR_SetTraceOption() with the PRTraceStopRecording ** option. This suggests that PR_RecordTraceEntries() should be ** called from a user supplied thread whose only job is to ** record trace entries. ** ** The environment variable NSPR_TRACE_LOG controls the operation ** of this function. When NSPR_TRACE_LOG is not defined in the ** environment, no recording of trace entries occurs. When ** NSPR_TRACE_LOG is defined, the value of its definition must be ** the filename of the file to receive the trace entry buffer. ** ** PR_RecordTraceEntries() attempts to record the in-memory ** buffer to a file, subject to the setting of the environment ** variable NSPR_TRACE_LOG. It is possible because of system ** load, the thread priority of the recording thread, number of ** active trace records being written over time, and other ** variables that some trace records can be lost. ... In other ** words: don't bet the farm on getting everything. ** ** INPUTS: none ** ** OUTPUTS: none ** ** RETURNS: PR_STATUS ** PR_SUCCESS no errors were found. ** PR_FAILURE errors were found. ** ** RESTRICTIONS: ** Only one thread can call PR_RecordTraceEntries() within a ** process. ** ** On error, PR_RecordTraceEntries() may return prematurely. ** */ #if defined (DEBUG) || defined (FORCE_NSPR_TRACE) #define PR_RECORD_TRACE_ENTRIES()\ PR_RecordTraceEntries() #else #define PR_RECORD_TRACE_ENTRIES() #endif NSPR_API(void) PR_RecordTraceEntries( void ); /* ----------------------------------------------------------------------- ** FUNCTION: PR_GetTraceEntries() -- Retreive trace entries from ** the Trace Facility ** ** DESCRIPTION: ** PR_GetTraceEntries() retreives trace entries from the Trace ** Facility. Up to count trace entries are copied from the Trace ** Facility into buffer. Only those trace entries that have not ** been copied via a previous call to PR_GetTraceEntries() are ** copied. The actual number copied is placed in the PRInt32 ** variable pointed to by found. ** ** If more than count trace entries have entered the Trace ** Facility since the last call to PR_GetTraceEntries() ** a lost data condition is returned. In this case, the most ** recent count trace entries are copied into buffer and found is ** set to count. ** ** INPUTS: ** count. The number of trace entries to be copied into buffer. ** ** ** OUTPUTS: ** buffer. An array of PRTraceEntries. The buffer is supplied ** by the caller. ** ** found: 32bit signed integer. The number of PRTraceEntries ** actually copied. found is always less than or equal to count. ** ** RETURNS: ** zero when there is no lost data. ** non-zero when some PRTraceEntries have been lost. ** ** RESTRICTIONS: ** This is a real performance pig. The copy out operation is bad ** enough, but depending on then frequency of calls to the ** function, serious performance impact to the operating ** application may be realized. ... YMMV. ** */ #if defined (DEBUG) || defined (FORCE_NSPR_TRACE) #define PR_GET_TRACE_ENTRIES(buffer,count,found)\ PR_GetTraceEntries((buffer),(count),(found)) #else #define PR_GET_TRACE_ENTRIES(buffer,count,found) #endif NSPR_API(PRIntn) PR_GetTraceEntries( PRTraceEntry *buffer, /* where to write output */ PRInt32 count, /* number to get */ PRInt32 *found /* number you got */ ); PR_END_EXTERN_C #endif /* prtrace_h___ */