/* -*- Mode: C; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*- * * ***** BEGIN LICENSE BLOCK ***** * Version: MPL 1.1/GPL 2.0/LGPL 2.1 * * The contents of this file are subject to the Mozilla Public License Version * 1.1 (the "License"); you may not use this file except in compliance with * the License. You may obtain a copy of the License at * http://www.mozilla.org/MPL/ * * Software distributed under the License is distributed on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License * for the specific language governing rights and limitations under the * License. * * The Original Code is tmfrags.c code, released * Oct 26, 2002. * * The Initial Developer of the Original Code is * Netscape Communications Corporation. * Portions created by the Initial Developer are Copyright (C) 2002 * the Initial Developer. All Rights Reserved. * * Contributor(s): * Garrett Arch Blythe, 26-October-2002 * * Alternatively, the contents of this file may be used under the terms of * either the GNU General Public License Version 2 or later (the "GPL"), or * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), * in which case the provisions of the GPL or the LGPL are applicable instead * of those above. If you wish to allow use of your version of this file only * under the terms of either the GPL or the LGPL, and not to allow others to * use your version of this file under the terms of the MPL, indicate your * decision by deleting the provisions above and replace them with the notice * and other provisions required by the GPL or the LGPL. If you do not delete * the provisions above, a recipient may use your version of this file under * the terms of any one of the MPL, the GPL or the LGPL. * * ***** END LICENSE BLOCK ***** */ #include #include #include #include #include #include #include #include "nspr.h" #include "tmreader.h" #define ERROR_REPORT(num, val, msg) fprintf(stderr, "error(%d):\t\"%s\"\t%s\n", (num), (val), (msg)); #define CLEANUP(ptr) do { if(NULL != ptr) { free(ptr); ptr = NULL; } } while(0) #define ticks2msec(reader, ticks) ticks2xsec((reader), (ticks), 1000) #define ticks2usec(reader, ticks) ticks2xsec((reader), (ticks), 1000000) #define TICK_RESOLUTION 1000 #define TICK_PRINTABLE(timeval) ((PRFloat64)(timeval) / (PRFloat64)ST_TIMEVAL_RESOLUTION) typedef struct __struct_Options /* ** Options to control how we perform. ** ** mProgramName Used in help text. ** mInputName Name of the file. ** mOutput Output file, append. ** Default is stdout. ** mOutputName Name of the file. ** mHelp Wether or not help should be shown. ** mOverhead How much overhead an allocation will have. ** mAlignment What boundry will the end of an allocation line up on. ** mPageSize Controls the page size. A page containing only fragments ** is not fragmented. A page containing any life memory ** costs mPageSize in bytes. */ { const char* mProgramName; char* mInputName; FILE* mOutput; char* mOutputName; int mHelp; unsigned mOverhead; unsigned mAlignment; unsigned mPageSize; } Options; typedef struct __struct_Switch /* ** Command line options. */ { const char* mLongName; const char* mShortName; int mHasValue; const char* mValue; const char* mDescription; } Switch; #define DESC_NEWLINE "\n\t\t" static Switch gInputSwitch = {"--input", "-i", 1, NULL, "Specify input file." DESC_NEWLINE "stdin is default."}; static Switch gOutputSwitch = {"--output", "-o", 1, NULL, "Specify output file." DESC_NEWLINE "Appends if file exists." DESC_NEWLINE "stdout is default."}; static Switch gHelpSwitch = {"--help", "-h", 0, NULL, "Information on usage."}; static Switch gAlignmentSwitch = {"--alignment", "-al", 1, NULL, "All allocation sizes are made to be a multiple of this number." DESC_NEWLINE "Closer to actual heap conditions; set to 1 for true sizes." DESC_NEWLINE "Default value is 16."}; static Switch gOverheadSwitch = {"--overhead", "-ov", 1, NULL, "After alignment, all allocations are made to increase by this number." DESC_NEWLINE "Closer to actual heap conditions; set to 0 for true sizes." DESC_NEWLINE "Default value is 8."}; static Switch gPageSizeSwitch = {"--page-size", "-ps", 1, NULL, "Sets the page size which aids the identification of fragmentation." DESC_NEWLINE "Closer to actual heap conditions; set to 4294967295 for true sizes." DESC_NEWLINE "Default value is 4096."}; static Switch* gSwitches[] = { &gInputSwitch, &gOutputSwitch, &gAlignmentSwitch, &gOverheadSwitch, &gPageSizeSwitch, &gHelpSwitch }; typedef struct __struct_AnyArray /* ** Variable sized item array. ** ** mItems The void pointer items. ** mItemSize Size of each different item. ** mCount The number of items in the array. ** mCapacity How many more items we can hold before reallocing. ** mGrowBy How many items we allocate when we grow. */ { void* mItems; unsigned mItemSize; unsigned mCount; unsigned mCapacity; unsigned mGrowBy; } AnyArray; typedef int (*arrayMatchFunc)(void* inContext, AnyArray* inArray, void* inItem, unsigned inItemIndex) /* ** Callback function for the arrayIndexFn function. ** Used to determine an item match by customizable criteria. ** ** inContext The criteria and state of the search. ** User specified/created. ** inArray The array the item is in. ** inItem The item to evaluate for match. ** inItemIndex The index of this particular item in the array. ** ** return int 0 to specify a match. ** !0 to continue the search performed by arrayIndexFn. */ ; typedef enum __enum_HeapEventType /* ** Simple heap events are really one of two things. */ { FREE, ALLOC } HeapEventType; typedef enum __enum_HeapObjectType /* ** The various types of heap objects we track. */ { ALLOCATION, FRAGMENT } HeapObjectType; typedef struct __struct_HeapObject HeapObject; typedef struct __struct_HeapHistory /* ** A marker as to what has happened. ** ** mTimestamp When history occurred. ** mTMRSerial The historical state as known to the tmreader. ** mObjectIndex Index to the object that was before or after this event. ** The index as in the index according to all heap objects ** kept in the TMState structure. ** We use an index instead of a pointer as the array of ** objects can change location in the heap. */ { unsigned mTimestamp; unsigned mTMRSerial; unsigned mObjectIndex; } HeapHistory; struct __struct_HeapObject /* ** An object in the heap. ** ** A special case should be noted here. If either the birth or death ** history leads to an object of the same type, then this object ** is the same as that object, but was modified somehow. ** Also note that multiple objects may have the same birth object, ** as well as the same death object. ** ** mUniqueID Each object is unique. ** mType Either allocation or fragment. ** mHeapOffset Where in the heap the object is. ** mSize How much of the heap the object takes. ** mBirth History about the birth event. ** mDeath History about the death event. */ { unsigned mUniqueID; HeapObjectType mType; unsigned mHeapOffset; unsigned mSize; HeapHistory mBirth; HeapHistory mDeath; }; typedef struct __struct_TMState /* ** State of our current operation. ** Stats we are trying to calculate. ** ** mOptions Obilgatory options pointer. ** mTMR The tmreader, used in tmreader API calls. ** mLoopExitTMR Set to non zero in order to quickly exit from tmreader ** input loop. This will also result in an error. ** uMinTicks Start of run, milliseconds. ** uMaxTicks End of run, milliseconds. */ { Options* mOptions; tmreader* mTMR; int mLoopExitTMR; unsigned uMinTicks; unsigned uMaxTicks; } TMState; int initOptions(Options* outOptions, int inArgc, char** inArgv) /* ** returns int 0 if successful. */ { int retval = 0; int loop = 0; int switchLoop = 0; int match = 0; const int switchCount = sizeof(gSwitches) / sizeof(gSwitches[0]); Switch* current = NULL; /* ** Set any defaults. */ memset(outOptions, 0, sizeof(Options)); outOptions->mProgramName = inArgv[0]; outOptions->mInputName = strdup("-"); outOptions->mOutput = stdout; outOptions->mOutputName = strdup("stdout"); outOptions->mAlignment = 16; outOptions->mOverhead = 8; if(NULL == outOptions->mOutputName || NULL == outOptions->mInputName) { retval = __LINE__; ERROR_REPORT(retval, "stdin/stdout", "Unable to strdup."); } /* ** Go through and attempt to do the right thing. */ for(loop = 1; loop < inArgc && 0 == retval; loop++) { match = 0; current = NULL; for(switchLoop = 0; switchLoop < switchCount && 0 == retval; switchLoop++) { if(0 == strcmp(gSwitches[switchLoop]->mLongName, inArgv[loop])) { match = __LINE__; } else if(0 == strcmp(gSwitches[switchLoop]->mShortName, inArgv[loop])) { match = __LINE__; } if(match) { if(gSwitches[switchLoop]->mHasValue) { /* ** Attempt to absorb next option to fullfill value. */ if(loop + 1 < inArgc) { loop++; current = gSwitches[switchLoop]; current->mValue = inArgv[loop]; } } else { current = gSwitches[switchLoop]; } break; } } if(0 == match) { outOptions->mHelp = __LINE__; retval = __LINE__; ERROR_REPORT(retval, inArgv[loop], "Unknown command line switch."); } else if(NULL == current) { outOptions->mHelp = __LINE__; retval = __LINE__; ERROR_REPORT(retval, inArgv[loop], "Command line switch requires a value."); } else { /* ** Do something based on address/swtich. */ if(current == &gInputSwitch) { CLEANUP(outOptions->mInputName); outOptions->mInputName = strdup(current->mValue); if(NULL == outOptions->mInputName) { retval = __LINE__; ERROR_REPORT(retval, current->mValue, "Unable to strdup."); } } else if(current == &gOutputSwitch) { CLEANUP(outOptions->mOutputName); if(NULL != outOptions->mOutput && stdout != outOptions->mOutput) { fclose(outOptions->mOutput); outOptions->mOutput = NULL; } outOptions->mOutput = fopen(current->mValue, "a"); if(NULL == outOptions->mOutput) { retval = __LINE__; ERROR_REPORT(retval, current->mValue, "Unable to open output file."); } else { outOptions->mOutputName = strdup(current->mValue); if(NULL == outOptions->mOutputName) { retval = __LINE__; ERROR_REPORT(retval, current->mValue, "Unable to strdup."); } } } else if(current == &gHelpSwitch) { outOptions->mHelp = __LINE__; } else if(current == &gAlignmentSwitch) { unsigned arg = 0; char* endScan = NULL; errno = 0; arg = strtoul(current->mValue, &endScan, 0); if(0 == errno && endScan != current->mValue) { outOptions->mAlignment = arg; } else { retval = __LINE__; ERROR_REPORT(retval, current->mValue, "Unable to convert to a number."); } } else if(current == &gOverheadSwitch) { unsigned arg = 0; char* endScan = NULL; errno = 0; arg = strtoul(current->mValue, &endScan, 0); if(0 == errno && endScan != current->mValue) { outOptions->mOverhead = arg; } else { retval = __LINE__; ERROR_REPORT(retval, current->mValue, "Unable to convert to a number."); } } else if(current == &gPageSizeSwitch) { unsigned arg = 0; char* endScan = NULL; errno = 0; arg = strtoul(current->mValue, &endScan, 0); if(0 == errno && endScan != current->mValue) { outOptions->mPageSize = arg; } else { retval = __LINE__; ERROR_REPORT(retval, current->mValue, "Unable to convert to a number."); } } else { retval = __LINE__; ERROR_REPORT(retval, current->mLongName, "No hanlder for command line switch."); } } } return retval; } PRUint32 ticks2xsec(tmreader* aReader, PRUint32 aTicks, PRUint32 aResolution) /* ** Convert platform specific ticks to second units */ { PRUint32 retval = 0; PRUint64 bigone; PRUint64 tmp64; LL_UI2L(bigone, aResolution); LL_UI2L(tmp64, aTicks); LL_MUL(bigone, bigone, tmp64); LL_UI2L(tmp64, aReader->ticksPerSec); LL_DIV(bigone, bigone, tmp64); LL_L2UI(retval, bigone); return retval; } void cleanOptions(Options* inOptions) /* ** Clean up any open handles. */ { unsigned loop = 0; CLEANUP(inOptions->mInputName); CLEANUP(inOptions->mOutputName); if(NULL != inOptions->mOutput && stdout != inOptions->mOutput) { fclose(inOptions->mOutput); } memset(inOptions, 0, sizeof(Options)); } void showHelp(Options* inOptions) /* ** Show some simple help text on usage. */ { int loop = 0; const int switchCount = sizeof(gSwitches) / sizeof(gSwitches[0]); const char* valueText = NULL; printf("usage:\t%s [arguments]\n", inOptions->mProgramName); printf("\n"); printf("arguments:\n"); for(loop = 0; loop < switchCount; loop++) { if(gSwitches[loop]->mHasValue) { valueText = " "; } else { valueText = ""; } printf("\t%s%s\n", gSwitches[loop]->mLongName, valueText); printf("\t %s%s", gSwitches[loop]->mShortName, valueText); printf(DESC_NEWLINE "%s\n\n", gSwitches[loop]->mDescription); } printf("This tool reports heap fragmentation stats from a trace-malloc log.\n"); } AnyArray* arrayCreate(unsigned inItemSize, unsigned inGrowBy) /* ** Create an array container object. */ { AnyArray* retval = NULL; if(0 != inGrowBy && 0 != inItemSize) { retval = (AnyArray*)calloc(1, sizeof(AnyArray)); retval->mItemSize = inItemSize; retval->mGrowBy = inGrowBy; } return retval; } void arrayDestroy(AnyArray* inArray) /* ** Release the memory the array contains. ** This will release the items as well. */ { if(NULL != inArray) { if(NULL != inArray->mItems) { free(inArray->mItems); } free(inArray); } } unsigned arrayAlloc(AnyArray* inArray, unsigned inItems) /* ** Resize the item array capcity to a specific number of items. ** This could possibly truncate the array, so handle that as well. ** ** returns unsigned <= inArray->mCapactiy on success. */ { unsigned retval = (unsigned)-1; if(NULL != inArray) { void* moved = NULL; moved = realloc(inArray->mItems, inItems * inArray->mItemSize); if(NULL != moved) { inArray->mItems = moved; inArray->mCapacity = inItems; if(inArray->mCount > inItems) { inArray->mCount = inItems; } retval = inItems; } } return retval; } void* arrayItem(AnyArray* inArray, unsigned inIndex) /* ** Return the array item at said index. ** Zero based index. ** ** returns void* NULL on failure. */ { void* retval = NULL; if(NULL != inArray && inIndex < inArray->mCount) { retval = (void*)((char*)inArray->mItems + (inArray->mItemSize * inIndex)); } return retval; } unsigned arrayIndex(AnyArray* inArray, void* inItem, unsigned inStartIndex) /* ** Go through the array from the index specified looking for an item ** match based on byte for byte comparison. ** We allow specifying the start index in order to handle arrays with ** duplicate items. ** ** returns unsigned >= inArray->mCount on failure. */ { unsigned retval = (unsigned)-1; if(NULL != inArray && NULL != inItem && inStartIndex < inArray->mCount) { void* curItem = NULL; for(retval = inStartIndex; retval < inArray->mCount; retval++) { curItem = arrayItem(inArray, retval); if(0 == memcmp(inItem, curItem, inArray->mItemSize)) { break; } } } return retval; } unsigned arrayIndexFn(AnyArray* inArray, arrayMatchFunc inFunc, void* inFuncContext, unsigned inStartIndex) /* ** Go through the array from the index specified looking for an item ** match based upon the return value of inFunc (0, Zero, is a match). ** We allow specifying the start index in order to facilitate looping over ** the array which could have multiple matches. ** ** returns unsigned >= inArray->mCount on failure. */ { unsigned retval = (unsigned)-1; if(NULL != inArray && NULL != inFunc && inStartIndex < inArray->mCount) { void* curItem = NULL; for(retval = inStartIndex; retval < inArray->mCount; retval++) { curItem = arrayItem(inArray, retval); if(0 == inFunc(inFuncContext, inArray, curItem, retval)) { break; } } } return retval; } unsigned arrayAddItem(AnyArray* inArray, void* inItem) /* ** Add a new item to the array. ** This is done by copying the item. ** ** returns unsigned < inArray->mCount on success. */ { unsigned retval = (unsigned)-1; if(NULL != inArray && NULL != inItem) { int noCopy = 0; /* ** See if the array should grow. */ if(inArray->mCount == inArray->mCapacity) { unsigned allocRes = 0; allocRes = arrayAlloc(inArray, inArray->mCapacity + inArray->mGrowBy); if(allocRes > inArray->mCapacity) { noCopy = __LINE__; } } if(0 == noCopy) { retval = inArray->mCount; inArray->mCount++; memcpy(arrayItem(inArray, retval), inItem, inArray->mItemSize); } } return retval; } HeapObject* initHeapObject(HeapObject* inObject) /* ** Function to init the heap object just right. ** Sets the unique ID to something unique. */ { HeapObject* retval = inObject; if(NULL != inObject) { static unsigned uniqueGenerator = 0; memset(inObject, -1, sizeof(HeapObject)); inObject->mUniqueID = uniqueGenerator; uniqueGenerator++; } return retval; } int simpleHeapEvent(TMState* inStats, HeapEventType inType, unsigned mTimestamp, unsigned inSerial, unsigned inHeapID, unsigned inSize) /* ** A new heap event will cause the creation of a new heap object. ** The new heap object will displace, or replace, a heap object of a different type. */ { int retval = 0; HeapObject newObject; /* ** Set the most basic object details. */ initHeapObject(&newObject); newObject.mHeapOffset = inHeapID; newObject.mSize = inSize; if(FREE == inType) { newObject.mType = FRAGMENT; } else if(ALLOC == inType) { newObject.mType = ALLOCATION; } /* ** Add it to the heap object array. */ /* ** TODO GAB ** ** First thing to do is to add the new object to the heap in order to ** obtain a valid index. ** ** Next, find all matches to this range of heap memory that this event ** refers to, that are alive during this timestamp (no death yet). ** Fill in the death event of those objects. ** If the objects contain some portions outside of the range, then ** new objects for those ranges need to be created that carry on ** the same object type, have the index of the old object for birth, ** and the serial of the old object, new timestamp of course. ** The old object's death points to the new object, which tells why the ** fragmentation took place. ** The new object birth points to the old object only if a fragment. ** An allocation only has a birth object when it is a realloc (complex) ** heap event. ** ** I believe this give us enough information to look up particular ** details of the heap at any given time. */ return retval; } int complexHeapEvent(TMState* inStats, unsigned mTimestamp, unsigned inOldSerial, unsigned inOldHeapID, unsigned inOSize, unsigned inNewSerial, unsigned inNewHeapID, unsigned inNewSize) /* ** Generally, this event intends to chain one old heap object to a newer heap object. ** Otherwise, the functionality should recognizable ala simpleHeapEvent. */ { int retval = 0; /* ** TODO GAB */ return retval; } unsigned actualByteSize(Options* inOptions, unsigned retval) /* ** Apply alignment and overhead to size to figure out actual byte size. ** This by default mimics spacetrace with default options (msvc crt heap). */ { if(0 != retval) { unsigned eval = 0; unsigned over = 0; eval = retval - 1; if(0 != inOptions->mAlignment) { over = eval % inOptions->mAlignment; } retval = eval + inOptions->mOverhead + inOptions->mAlignment - over; } return retval; } void tmEventHandler(tmreader* inReader, tmevent* inEvent) /* ** Callback from the tmreader_eventloop. ** Build up our fragmentation information herein. */ { char type = inEvent->type; TMState* stats = (TMState*)inReader->data; /* ** Only intersted in handling events of a particular type. */ switch(type) { default: return; case TM_EVENT_MALLOC: case TM_EVENT_CALLOC: case TM_EVENT_REALLOC: case TM_EVENT_FREE: break; } /* ** Should we even try to look? ** Set mLoopExitTMR to non-zero to abort the read loop faster. */ if(0 == stats->mLoopExitTMR) { Options* options = (Options*)stats->mOptions; unsigned timestamp = ticks2msec(stats->mTMR, inEvent->u.alloc.interval); unsigned actualSize = actualByteSize(options, inEvent->u.alloc.size); unsigned heapID = inEvent->u.alloc.ptr; unsigned serial = inEvent->serial; /* ** Check the timestamp range of our overall state. */ if(stats->uMinTicks > timestamp) { stats->uMinTicks = timestamp; } if(stats->uMaxTicks < timestamp) { stats->uMaxTicks = timestamp; } /* ** Realloc in general deserves some special attention if dealing ** with an old allocation (not new memory). */ if(TM_EVENT_REALLOC == type && 0 != inEvent->u.alloc.oldserial) { unsigned oldActualSize = actualByteSize(options, inEvent->u.alloc.oldsize); unsigned oldHeapID = inEvent->u.alloc.oldptr; unsigned oldSerial = inEvent->u.alloc.oldserial; if(0 == actualSize) { /* ** Reallocs of size zero are to become free events. */ stats->mLoopExitTMR = simpleHeapEvent(stats, FREE, timestamp, serial, oldHeapID, oldActualSize); } else if(heapID != oldHeapID || actualSize != oldActualSize) { /* ** Reallocs which moved generate two events. ** Reallocs which changed size generate two events. ** ** One event to free the old memory area. ** Another event to allocate the new memory area. ** They are to be linked to one another, so the history ** and true origin can be tracked. */ stats->mLoopExitTMR = complexHeapEvent(stats, timestamp, oldSerial, oldHeapID, oldActualSize, serial, heapID, actualSize); } else { /* ** The realloc is not considered an operation and is skipped. ** It is not an operation, because it did not move or change ** size; this can happen if a realloc falls within the ** alignment of an allocation. ** Say if you realloc a 1 byte allocation to 2 bytes, it will ** not really change heap impact unless you have 1 set as ** the alignment of your allocations. */ } } else if(TM_EVENT_FREE == type) { /* ** Generate a free event to create a fragment. */ stats->mLoopExitTMR = simpleHeapEvent(stats, FREE, timestamp, serial, heapID, actualSize); } else { /* ** Generate an allocation event to clear fragments. */ stats->mLoopExitTMR = simpleHeapEvent(stats, ALLOC, timestamp, serial, heapID, actualSize); } } } int tmfrags(Options* inOptions) /* ** Load the input file and report stats. */ { int retval = 0; TMState stats; memset(&stats, 0, sizeof(stats)); stats.mOptions = inOptions; stats.uMinTicks = 0xFFFFFFFFU; /* ** Need a tmreader. */ stats.mTMR = tmreader_new(inOptions->mProgramName, &stats); if(NULL != stats.mTMR) { int tmResult = 0; tmResult = tmreader_eventloop(stats.mTMR, inOptions->mInputName, tmEventHandler); if(0 == tmResult) { retval = __LINE__; ERROR_REPORT(retval, inOptions->mInputName, "Problem reading trace-malloc data."); } if(0 != stats.mLoopExitTMR) { retval = stats.mLoopExitTMR; ERROR_REPORT(retval, inOptions->mInputName, "Aborted trace-malloc input loop."); } tmreader_destroy(stats.mTMR); stats.mTMR = NULL; } else { retval = __LINE__; ERROR_REPORT(retval, inOptions->mProgramName, "Unable to obtain tmreader."); } return retval; } int main(int inArgc, char** inArgv) { int retval = 0; Options options; retval = initOptions(&options, inArgc, inArgv); if(options.mHelp) { showHelp(&options); } else if(0 == retval) { retval = tmfrags(&options); } cleanOptions(&options); return retval; }